mirror of
https://github.com/openstenoproject/qmk
synced 2024-11-23 00:44:38 +00:00
1f2b1dedcc
* Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation.
453 lines
19 KiB
C
453 lines
19 KiB
C
// Copyright 2021 Nick Brassel (@tzarc)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
#include "deferred_exec.h"
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter global configurables (add to your keyboard's config.h)
|
|
|
|
#ifndef QUANTUM_PAINTER_NUM_IMAGES
|
|
/**
|
|
* @def This controls the maximum number of images that Quantum Painter can load at any one time. Images can be loaded
|
|
* using \ref qp_load_image_mem, and can be unloaded by calling \ref qp_close_image. Increasing this number in
|
|
* order to load more images increases the amount of RAM required. Image data is not held in RAM, just metadata.
|
|
*/
|
|
# define QUANTUM_PAINTER_NUM_IMAGES 8
|
|
#endif // QUANTUM_PAINTER_NUM_IMAGES
|
|
|
|
#ifndef QUANTUM_PAINTER_NUM_FONTS
|
|
/**
|
|
* @def This controls the maximum number of fonts that Quantum Painter can load. Fonts can be loaded using
|
|
* \ref qp_load_font_mem, and can be unloaded by calling \ref qp_close_font. Increasing this number in order to
|
|
* load more fonts increases the amount of RAM required. Font data is not held in RAM, unless
|
|
* \ref QUANTUM_PAINTER_LOAD_FONTS_TO_RAM is set to TRUE.
|
|
*/
|
|
# define QUANTUM_PAINTER_NUM_FONTS 4
|
|
#endif // QUANTUM_PAINTER_NUM_FONTS
|
|
|
|
#ifndef QUANTUM_PAINTER_LOAD_FONTS_TO_RAM
|
|
/**
|
|
* @def This controls whether or not fonts should be cached in RAM. Under normal circumstances, fonts can have quite
|
|
* random access patterns, and due to timing of flash memory or external storage, it may be a significant speedup
|
|
* moving the font into RAM before use. Defaults to "off", but if it's enabled it will fallback to reading from the
|
|
* original location if corresponding RAM could not be allocated (such as being too large).
|
|
*/
|
|
# define QUANTUM_PAINTER_LOAD_FONTS_TO_RAM FALSE
|
|
#endif
|
|
|
|
#ifndef QUANTUM_PAINTER_CONCURRENT_ANIMATIONS
|
|
/**
|
|
* @def This controls the maximum number of animations that Quantum Painter can play simultaneously. Increasing this
|
|
* number in order to play more animations at the same time increases the amount of RAM required.
|
|
*/
|
|
# define QUANTUM_PAINTER_CONCURRENT_ANIMATIONS 4
|
|
#endif // QUANTUM_PAINTER_CONCURRENT_ANIMATIONS
|
|
|
|
#ifndef QUANTUM_PAINTER_PIXDATA_BUFFER_SIZE
|
|
/**
|
|
* @def This controls the maximum size of the pixel data buffer used for single blocks of transmission. Larger buffers
|
|
* means more data is processed at one time, with less frequent transmissions, at the cost of RAM.
|
|
*/
|
|
# define QUANTUM_PAINTER_PIXDATA_BUFFER_SIZE 32
|
|
#endif
|
|
|
|
#ifndef QUANTUM_PAINTER_SUPPORTS_256_PALETTE
|
|
/**
|
|
* @def This controls whether 256-color palettes are supported. This has relatively hefty requirements on RAM -- at
|
|
* least 1kB extra is required just to store the palette information, with more required for other metadata.
|
|
*/
|
|
# define QUANTUM_PAINTER_SUPPORTS_256_PALETTE FALSE
|
|
#endif
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter types
|
|
|
|
/**
|
|
* @typedef A handle to a Quantum Painter device, such as an LCD or OLED. Most Quantum Painter APIs require this
|
|
* argument in order to perform operations on the display.
|
|
*/
|
|
typedef const void *painter_device_t;
|
|
|
|
/**
|
|
* @typedef The desired rotation of a panel. Used as a parameter to \ref qp_init, and can be queried by
|
|
* \ref qp_get_geometry.
|
|
*/
|
|
typedef enum { QP_ROTATION_0, QP_ROTATION_90, QP_ROTATION_180, QP_ROTATION_270 } painter_rotation_t;
|
|
|
|
/**
|
|
* @typedef A descriptor for a Quantum Painter image.
|
|
*/
|
|
typedef struct painter_image_desc_t {
|
|
uint16_t width; ///< Image width
|
|
uint16_t height; ///< Image height
|
|
uint16_t frame_count; ///< Number of frames in this image
|
|
} painter_image_desc_t;
|
|
|
|
/**
|
|
* @typedef A handle to a Quantum Painter image.
|
|
*/
|
|
typedef const painter_image_desc_t *painter_image_handle_t;
|
|
|
|
/**
|
|
* @typedef A descriptor for a Quantum Painter font.
|
|
*/
|
|
typedef struct painter_font_desc_t {
|
|
uint8_t line_height; ///< The number of pixels in height for each line
|
|
} painter_font_desc_t;
|
|
|
|
/**
|
|
* @typedef A handle to a Quantum Painter font.
|
|
*/
|
|
typedef const painter_font_desc_t *painter_font_handle_t;
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter External API
|
|
|
|
/**
|
|
* Initialize a device and set its rotation.
|
|
*
|
|
* @param device[in] the handle of the device to initialize
|
|
* @param rotation[in] the rotation to use
|
|
* @return true if initialization succeeded
|
|
* @return false if initialization failed
|
|
*/
|
|
bool qp_init(painter_device_t device, painter_rotation_t rotation);
|
|
|
|
/**
|
|
* Controls whether a display is on or off.
|
|
*
|
|
* @note If backlighting is used to control brightness (such as for an LCD), it will need to be handled external to
|
|
* Quantum Painter.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param power_on[in] whether or not the device should be on
|
|
* @return true if controlling the power state succeeded
|
|
* @return false if controlling the power state failed
|
|
*/
|
|
bool qp_power(painter_device_t device, bool power_on);
|
|
|
|
/**
|
|
* Clears a device's screen.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @return true if clearing the screen succeeded
|
|
* @return false if clearing the screen failed
|
|
*/
|
|
bool qp_clear(painter_device_t device);
|
|
|
|
/**
|
|
* Transmits any outstanding data to the screen in order to persist all changes to the display.
|
|
*
|
|
* @note Drivers without internal framebuffers will likely ignore this API.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @return true if flushing changes to the screen succeeded
|
|
* @return false if flushing changes to the screen failed
|
|
*/
|
|
bool qp_flush(painter_device_t device);
|
|
|
|
/**
|
|
* Retrieves the size, rotation, and offsets for the display.
|
|
*
|
|
* @note Any arguments of NULL will be ignored.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param width[out] the device's width
|
|
* @param height[out] the device's height
|
|
* @param rotation[out] the device's rotation
|
|
* @param offset_x[out] the device's x-offset applied while drawing
|
|
* @param offset_y[out] the device's y-offset applied while drawing
|
|
*/
|
|
void qp_get_geometry(painter_device_t device, uint16_t *width, uint16_t *height, painter_rotation_t *rotation, uint16_t *offset_x, uint16_t *offset_y);
|
|
|
|
/**
|
|
* Allows repositioning of the viewport if the panel geometry offsets are non-zero.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param offset_x[in] the device's x-offset applied while drawing
|
|
* @param offset_y[in] the device's y-offset applied while drawing
|
|
*/
|
|
void qp_set_viewport_offsets(painter_device_t device, uint16_t offset_x, uint16_t offset_y);
|
|
|
|
/**
|
|
* Sets a pixel to the specified color.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position to draw onto the device
|
|
* @param y[in] the y-position to draw onto the device
|
|
* @param hue[in] the hue to use, with 0-360 mapped to 0-255
|
|
* @param sat[in] the saturation to use, with 0-100% mapped to 0-255
|
|
* @param val[in] the value to use, with 0-100% mapped to 0-255
|
|
* @return true if setting the pixel succeeded
|
|
* @return false if setting the pixel failed
|
|
*/
|
|
bool qp_setpixel(painter_device_t device, uint16_t x, uint16_t y, uint8_t hue, uint8_t sat, uint8_t val);
|
|
|
|
/**
|
|
* Draws a line using the specified color.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x0[in] the device's x-position to start
|
|
* @param y0[in] the device's y-position to start
|
|
* @param x1[in] the device's x-position to finish
|
|
* @param y1[in] the device's y-position to finish
|
|
* @param hue[in] the hue to use, with 0-360 mapped to 0-255
|
|
* @param sat[in] the saturation to use, with 0-100% mapped to 0-255
|
|
* @param val[in] the value to use, with 0-100% mapped to 0-255
|
|
* @return true if drawing the line succeeded
|
|
* @return false if drawing the line failed
|
|
*/
|
|
bool qp_line(painter_device_t device, uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint8_t hue, uint8_t sat, uint8_t val);
|
|
|
|
/**
|
|
* Draws a rectangle using the specified color, optionally filled.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param left[in] the device's x-position to start
|
|
* @param top[in] the device's y-position to start
|
|
* @param right[in] the device's x-position to finish
|
|
* @param bottom[in] the device's y-position to finish
|
|
* @param hue[in] the hue to use, with 0-360 mapped to 0-255
|
|
* @param sat[in] the saturation to use, with 0-100% mapped to 0-255
|
|
* @param val[in] the value to use, with 0-100% mapped to 0-255
|
|
* @param filled[in] whether the rectangle should be filled
|
|
* @return true if drawing the rectangle succeeded
|
|
* @return false if drawing the rectangle failed
|
|
*/
|
|
bool qp_rect(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom, uint8_t hue, uint8_t sat, uint8_t val, bool filled);
|
|
|
|
/**
|
|
* Draws a circle using the specified color, optionally filled.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position of the centre of the circle to draw onto the device
|
|
* @param y[in] the y-position of the centre of the circle to draw onto the device
|
|
* @param radius[in] the radius of the circle to draw
|
|
* @param hue[in] the hue to use, with 0-360 mapped to 0-255
|
|
* @param sat[in] the saturation to use, with 0-100% mapped to 0-255
|
|
* @param val[in] the value to use, with 0-100% mapped to 0-255
|
|
* @param filled[in] whether the circle should be filled
|
|
* @return true if drawing the circle succeeded
|
|
* @return false if drawing the circle failed
|
|
*/
|
|
bool qp_circle(painter_device_t device, uint16_t x, uint16_t y, uint16_t radius, uint8_t hue, uint8_t sat, uint8_t val, bool filled);
|
|
|
|
/**
|
|
* Draws a ellipse using the specified color, optionally filled.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position of the centre of the ellipse to draw onto the device
|
|
* @param y[in] the y-position of the centre of the ellipse to draw onto the device
|
|
* @param sizex[in] the horizontal size of the ellipse
|
|
* @param sizey[in] the vertical size of the ellipse
|
|
* @param hue[in] the hue to use, with 0-360 mapped to 0-255
|
|
* @param sat[in] the saturation to use, with 0-100% mapped to 0-255
|
|
* @param val[in] the value to use, with 0-100% mapped to 0-255
|
|
* @param filled[in] whether the ellipse should be filled
|
|
* @return true if drawing the ellipse succeeded
|
|
* @return false if drawing the ellipse failed
|
|
*/
|
|
bool qp_ellipse(painter_device_t device, uint16_t x, uint16_t y, uint16_t sizex, uint16_t sizey, uint8_t hue, uint8_t sat, uint8_t val, bool filled);
|
|
|
|
/**
|
|
* Sets up the location on the display to stream raw pixel data to the display, using \ref qp_pixdata.
|
|
*
|
|
* @note This is for advanced uses only, and should not be required for normal Quantum Painter functionality.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param left[in] the device's x-position to start
|
|
* @param top[in] the device's y-position to start
|
|
* @param right[in] the device's x-position to finish
|
|
* @param bottom[in] the device's y-position to finish
|
|
* @return true if setting the viewport succeeded
|
|
* @return false if setting the viewport failed
|
|
*/
|
|
bool qp_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom);
|
|
|
|
/**
|
|
* Streams raw pixel data (in the native panel format) to the area previously set by \ref qp_viewport.
|
|
*
|
|
* @note This is for advanced uses only, and should not be required for normal Quantum Painter functionality.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param pixel_data[in] pointer to buffer data
|
|
* @param native_pixel_count[in] the number of pixels to transmit
|
|
* @return true if streaming of data succeeded
|
|
* @return false if streaming of data failed
|
|
*/
|
|
bool qp_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count);
|
|
|
|
/**
|
|
* Loads an image into memory.
|
|
*
|
|
* @note Images can be unloaded by calling \ref qp_close_image.
|
|
*
|
|
* @param buffer[in] the image data to load
|
|
* @return an image handle usable with \ref qp_drawimage, \ref qp_drawimage_recolor, \ref qp_animate, and
|
|
* \ref qp_animate_recolor.
|
|
* @return NULL if loading the image failed
|
|
*/
|
|
painter_image_handle_t qp_load_image_mem(const void *buffer);
|
|
|
|
/**
|
|
* Closes an image handle when no longer in use.
|
|
*
|
|
* @param image[in] the handle of the image to unload
|
|
* @return true if unloading the image succeeded
|
|
* @return false if unloading the image failed
|
|
*/
|
|
bool qp_close_image(painter_image_handle_t image);
|
|
|
|
/**
|
|
* Draws an image to the display.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position where the image should be drawn onto the device
|
|
* @param y[in] the y-position where the image should be drawn onto the device
|
|
* @param image[in] the handle of the image to draw
|
|
* @return true if drawing the image succeeded
|
|
* @return false if drawing the image failed
|
|
*/
|
|
bool qp_drawimage(painter_device_t device, uint16_t x, uint16_t y, painter_image_handle_t image);
|
|
|
|
/**
|
|
* Draws an image to the display, recoloring monochrome images to the desired foreground/background.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position where the image should be drawn onto the device
|
|
* @param y[in] the y-position where the image should be drawn onto the device
|
|
* @param image[in] the handle of the image to draw
|
|
* @param hue_fg[in] the foreground hue to use, with 0-360 mapped to 0-255
|
|
* @param sat_fg[in] the foreground saturation to use, with 0-100% mapped to 0-255
|
|
* @param val_fg[in] the foreground value to use, with 0-100% mapped to 0-255
|
|
* @param hue_bg[in] the background hue to use, with 0-360 mapped to 0-255
|
|
* @param sat_bg[in] the background saturation to use, with 0-100% mapped to 0-255
|
|
* @param val_bg[in] the background value to use, with 0-100% mapped to 0-255
|
|
* @return true if drawing the image succeeded
|
|
* @return false if drawing the image failed
|
|
*/
|
|
bool qp_drawimage_recolor(painter_device_t device, uint16_t x, uint16_t y, painter_image_handle_t image, uint8_t hue_fg, uint8_t sat_fg, uint8_t val_fg, uint8_t hue_bg, uint8_t sat_bg, uint8_t val_bg);
|
|
|
|
/**
|
|
* Draws an animation to the display.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position where the image should be drawn onto the device
|
|
* @param y[in] the y-position where the image should be drawn onto the device
|
|
* @param image[in] the handle of the image to draw
|
|
* @return the \ref deferred_token to use with \ref qp_stop_animation in order to stop animating
|
|
* @return INVALID_DEFERRED_TOKEN if animating the image failed
|
|
*/
|
|
deferred_token qp_animate(painter_device_t device, uint16_t x, uint16_t y, painter_image_handle_t image);
|
|
|
|
/**
|
|
* Draws an animation to the display, recoloring monochrome images to the desired foreground/background.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position where the image should be drawn onto the device
|
|
* @param y[in] the y-position where the image should be drawn onto the device
|
|
* @param image[in] the handle of the image to draw
|
|
* @param hue_fg[in] the foreground hue to use, with 0-360 mapped to 0-255
|
|
* @param sat_fg[in] the foreground saturation to use, with 0-100% mapped to 0-255
|
|
* @param val_fg[in] the foreground value to use, with 0-100% mapped to 0-255
|
|
* @param hue_bg[in] the background hue to use, with 0-360 mapped to 0-255
|
|
* @param sat_bg[in] the background saturation to use, with 0-100% mapped to 0-255
|
|
* @param val_bg[in] the background value to use, with 0-100% mapped to 0-255
|
|
* @return the \ref deferred_token to use with \ref qp_stop_animation in order to stop animating
|
|
* @return INVALID_DEFERRED_TOKEN if animating the image failed
|
|
*/
|
|
deferred_token qp_animate_recolor(painter_device_t device, uint16_t x, uint16_t y, painter_image_handle_t image, uint8_t hue_fg, uint8_t sat_fg, uint8_t val_fg, uint8_t hue_bg, uint8_t sat_bg, uint8_t val_bg);
|
|
|
|
/**
|
|
* Cancels a running animation.
|
|
*
|
|
* @param anim_token[in] the animation token returned by \ref qp_animate, or \ref qp_animate_recolor.
|
|
*/
|
|
void qp_stop_animation(deferred_token anim_token);
|
|
|
|
/**
|
|
* Loads a font into memory.
|
|
*
|
|
* @note Fonts can be unloaded by calling \ref qp_close_font.
|
|
*
|
|
* @param buffer[in] the font data to load
|
|
* @return an image handle usable with \ref qp_textwidth, \ref qp_drawtext, and \ref qp_drawtext_recolor.
|
|
* @return NULL if loading the font failed
|
|
*/
|
|
painter_font_handle_t qp_load_font_mem(const void *buffer);
|
|
|
|
/**
|
|
* Closes a font handle when no longer in use.
|
|
*
|
|
* @param font[in] the handle of the font to unload
|
|
* @return true if unloading the font succeeded
|
|
* @return false if unloading the font failed
|
|
*/
|
|
bool qp_close_font(painter_font_handle_t font);
|
|
|
|
/**
|
|
* Measures the width (in pixels) of the supplied string, given the specified font.
|
|
*
|
|
* @param font[in] the handle of the font
|
|
* @param str[in] the string to measure
|
|
* @return the width (in pixels) needed to draw the specified string
|
|
*/
|
|
int16_t qp_textwidth(painter_font_handle_t font, const char *str);
|
|
|
|
/**
|
|
* Draws text to the display.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position where the text should be drawn onto the device
|
|
* @param y[in] the y-position where the text should be drawn onto the device
|
|
* @param font[in] the handle of the font
|
|
* @param str[in] the string to draw
|
|
* @return the width (in pixels) used when drawing the specified string
|
|
*/
|
|
int16_t qp_drawtext(painter_device_t device, uint16_t x, uint16_t y, painter_font_handle_t font, const char *str);
|
|
|
|
/**
|
|
* Draws text to the display, recoloring monochrome fonts to the desired foreground/background.
|
|
*
|
|
* @param device[in] the handle of the device to control
|
|
* @param x[in] the x-position where the text should be drawn onto the device
|
|
* @param y[in] the y-position where the text should be drawn onto the device
|
|
* @param font[in] the handle of the font
|
|
* @param str[in] the string to draw
|
|
* @param hue_fg[in] the foreground hue to use, with 0-360 mapped to 0-255
|
|
* @param sat_fg[in] the foreground saturation to use, with 0-100% mapped to 0-255
|
|
* @param val_fg[in] the foreground value to use, with 0-100% mapped to 0-255
|
|
* @param hue_bg[in] the background hue to use, with 0-360 mapped to 0-255
|
|
* @param sat_bg[in] the background saturation to use, with 0-100% mapped to 0-255
|
|
* @param val_bg[in] the background value to use, with 0-100% mapped to 0-255
|
|
* @return the width (in pixels) used when drawing the specified string
|
|
*/
|
|
int16_t qp_drawtext_recolor(painter_device_t device, uint16_t x, uint16_t y, painter_font_handle_t font, const char *str, uint8_t hue_fg, uint8_t sat_fg, uint8_t val_fg, uint8_t hue_bg, uint8_t sat_bg, uint8_t val_bg);
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter Drivers
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9163_ENABLE
|
|
# include "qp_ili9163.h"
|
|
#endif // QUANTUM_PAINTER_ILI9163_ENABLE
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9341_ENABLE
|
|
# include "qp_ili9341.h"
|
|
#endif // QUANTUM_PAINTER_ILI9341_ENABLE
|
|
|
|
#ifdef QUANTUM_PAINTER_ST7789_ENABLE
|
|
# include "qp_st7789.h"
|
|
#endif // QUANTUM_PAINTER_ST7789_ENABLE
|
|
|
|
#ifdef QUANTUM_PAINTER_GC9A01_ENABLE
|
|
# include "qp_gc9a01.h"
|
|
#endif // QUANTUM_PAINTER_GC9A01_ENABLE
|
|
|
|
#ifdef QUANTUM_PAINTER_SSD1351_ENABLE
|
|
# include "qp_ssd1351.h"
|
|
#endif // QUANTUM_PAINTER_SSD1351_ENABLE
|