mirrors/opensteno_qmk
1
0
Fork 0
mirror of https://github.com/openstenoproject/qmk synced 2024-11-10 18:49:08 +00:00
Code Issues Projects Releases Packages Wiki Activity
opensteno_qmk/keyboards/meira/issi.c
Cole Markham a9a46adba0 Add support for Meira
2017-12-09 00:05:35 -05:00

286 lines
9.1 KiB
C
Executable file
Raw Blame History

#ifdef ISSI_ENABLE
#include <stdlib.h>
#include <stdint.h>
#include <util/delay.h>
#include <avr/sfr_defs.h>
#include <avr/io.h>
#include <util/twi.h>
#include "issi.h"
#include "print.h"
#include "TWIlib.h"
#define ISSI_ADDR_DEFAULT 0xE8
#define ISSI_REG_CONFIG 0x00
#define ISSI_REG_CONFIG_PICTUREMODE 0x00
#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
#define ISSI_CONF_PICTUREMODE 0x00
#define ISSI_CONF_AUTOFRAMEMODE 0x04
#define ISSI_CONF_AUDIOMODE 0x08
#define ISSI_REG_PICTUREFRAME 0x01
#define ISSI_REG_SHUTDOWN 0x0A
#define ISSI_REG_AUDIOSYNC 0x06
#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
uint8_t control[8][9] = {
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
};
ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0};
#ifndef cbi
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
#endif
#ifndef sbi
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
#endif
#define I2C_WRITE 0
#define F_SCL 400000UL // SCL frequency
#define Prescaler 1
#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
uint8_t i2c_start(uint8_t address)
{
// reset TWI control register
TWCR = 0;
// transmit START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// check if the start condition was successfully transmitted
if((TWSR & 0xF8) != TW_START){ return 1; }
// load slave address into data register
TWDR = address;
// start transmission of address
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// check if the device has acknowledged the READ / WRITE mode
uint8_t twst = TW_STATUS & 0xF8;
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
return 0;
}
uint8_t i2c_write(uint8_t data)
{
// load data into data register
TWDR = data;
// start transmission of data
TWCR = (1 << TWINT) | (1 << TWEN);
// wait for end of transmission
while (!(TWCR & (1 << TWINT)))
;
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
return 1;
}
return 0;
}
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
{
TWBR = (uint8_t)TWBR_val;
if (i2c_start(address | I2C_WRITE))
return 1;
for (uint16_t i = 0; i < length; i++) {
if (i2c_write(data[i]))
return 1;
}
// transmit STOP condition
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
return 0;
}
void setFrame(uint8_t device, uint8_t frame)
{
static uint8_t current_frame = -1;
if(current_frame != frame){
uint8_t payload[] = {
ISSI_ADDR_DEFAULT | device << 1,
ISSI_COMMANDREGISTER,
frame
};
TWITransmitData(payload, sizeof(payload), 0, 1);
}
// static uint8_t current_frame = 0xFF;
// if(current_frame == frame){
// // return;
// }
// uint8_t payload[2] = { ISSI_COMMANDREGISTER, frame };
// i2c_transmit(ISSI_ADDR_DEFAULT | device << 1, payload, 2);
// current_frame = frame;
}
void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data)
{
// Set the frame
setFrame(device, frame);
// Write to the register
uint8_t payload[] = {
ISSI_ADDR_DEFAULT | device << 1,
reg,
data
};
TWITransmitData(payload, sizeof(payload), 0, 1);
}
// void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm)
// {
// xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm);
// uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0...
// uint8_t y = cy - 1; // creating them once for less confusion
// if(pwm == 0){
// cbi(control[matrix][y], x);
// }else{
// sbi(control[matrix][y], x);
// }
// uint8_t device = (matrix & 0x06) >> 1;
// uint8_t control_reg = (y << 1) | (matrix & 0x01);
// uint8_t pwm_reg = 0;
// switch(matrix & 0x01){
// case 0:
// pwm_reg = 0x24;
// break;
// case 1:
// pwm_reg = 0x2C;
// break;
// }
// pwm_reg += (y << 4) + x;
// xprintf(" device: %02X\n", device);
// xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]);
// xprintf(" pwm: %02X %02X\n", pwm_reg, pwm);
// writeRegister8(device, 0, control_reg, control[matrix][y]);
// writeRegister8(device, 0, control_reg + 0x12, control[matrix][y]);
// writeRegister8(device, 0, pwm_reg, pwm);
// }
void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm)
{
uint8_t device_addr = (matrix & 0x06) >> 1;
ISSIDeviceStruct *device = issi_devices[device_addr];
if(device == 0){
return;
}
// xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm);
uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0...
uint8_t y = cy - 1; // creating them once for less confusion
uint8_t control_reg = (y << 1) | (matrix & 0x01);
if(pwm == 0){
cbi(device->led_ctrl[control_reg], x);
cbi(device->led_blink_ctrl[control_reg], x);
}else{
sbi(device->led_ctrl[control_reg], x);
sbi(device->led_blink_ctrl[control_reg], x);
}
uint8_t pwm_reg = 0;
switch(matrix & 0x01){
case 0:
pwm_reg = 0x00;
break;
case 1:
pwm_reg = 0x08;
break;
}
pwm_reg += (y << 4) + x;
// xprintf(" device_addr: %02X\n", device_addr);
// xprintf(" control: %02X %02X\n", control_reg, control[matrix][y]);
// xprintf(" pwm: %02X %02X\n", pwm_reg, pwm);
// writeRegister8(device_addr, 0, control_reg, control[matrix][y]);
device->led_pwm[pwm_reg] = pwm;
device->led_dirty = 1;
// writeRegister8(device_addr, 0, control_reg + 0x12, control[matrix][y]);
// writeRegister8(device_addr, 0, pwm_reg, pwm);
}
void update_issi(uint8_t device_addr, uint8_t blocking)
{
// This seems to take about 6ms
ISSIDeviceStruct *device = issi_devices[device_addr];
if(device != 0){
if(device->fn_dirty){
device->fn_dirty = 0;
setFrame(device_addr, ISSI_BANK_FUNCTIONREG);
TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1);
}
if(device->led_dirty){
device->led_dirty = 0;
setFrame(device_addr, 0);
TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking);
}
}
}
void issi_init(void)
{
// Set LED_EN/SDB high to enable the chip
xprintf("Enabing SDB on pin: %d\n", LED_EN_PIN);
_SFR_IO8((LED_EN_PIN >> 4) + 1) &= ~_BV(LED_EN_PIN & 0xF); // IN
_SFR_IO8((LED_EN_PIN >> 4) + 2) |= _BV(LED_EN_PIN & 0xF); // HI
TWIInit();
for(uint8_t device_addr = 0; device_addr < 4; device_addr++){
xprintf("ISSI Init device: %d\n", device_addr);
// If this device has been previously allocated, free it
if(issi_devices[device_addr] != 0){
free(issi_devices[device_addr]);
}
// Try to shutdown the device, if this fails skip this device
writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
while (!isTWIReady()){_delay_us(1);}
if(TWIInfo.errorCode != 0xFF){
xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode);
continue;
}
// Allocate the device structure - calloc zeros it for us
ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1);
issi_devices[device_addr] = device;
device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
device->fn_register_addr = 0;
device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1;
device->led_register_addr = 0;
// set dirty bits so that all of the buffered data is written out
device->fn_dirty = 1;
device->led_dirty = 1;
update_issi(device_addr, 1);
// Set the function register to picture mode
// device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE;
writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
}
// Shutdown and set all registers to 0
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00);
// for(uint8_t bank = 0; bank <= 7; bank++){
// for (uint8_t reg = 0x00; reg <= 0xB3; reg++) {
// writeRegister8(device_addr, bank, reg, 0x00);
// }
// }
// for (uint8_t reg = 0; reg <= 0x0C; reg++) {
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00);
// }
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
// writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01);
// picture mode
// writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01);
//Enable blink
// writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B);
//Enable Breath
}
#endif
Reference in a new issue View git blame Copy permalink