b05c0e46c6
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition |
||
|---|---|---|
| .. | ||
| bluepill70 | ||
| boards/GENERIC_STM32_F103 | ||
| keymaps | ||
| ld | ||
| bluepill.c | ||
| bluepill.h | ||
| config.h | ||
| readme.md | ||
| rules.mk | ||
BluePill handwired
Keyboards using a BluePill controller (generic Chinese STM32F103C8T6) and based on the KC64 of Xydane.
Keyboard Maintainer: FPazos, but I hope to leave the project in better hands.
Hardware Supported: Bluepill STM32F103C8T6
Hardware Availability: Everywhere
Make example for BluePill70 (after setting up your build environment):
make handwired/bluepill/bluepill70:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Read everything before using it.
Introduction
First of all thanks to Xydane at GeekHack for his advice and his repository, without it you couldn't be reading this.
That's was an attempt to create a firmware using an STM32F103C8T6, and in a "future", also developing a revision for split keyboards. But... As I'm mainly a web developer I didn't even get to debug the controller, not to speak about ChibiOS. So I just structured everything, created a working 70% layout and leave the project to someone with more knowledge and patience.
Resistor fix
If you want to use the Bluepill USB port, it's very likely that you need to solder a 1.8 kΩ between PA12 and 3.3V. That depends on the PC's motherboard but I needed, more info here.
No bootloader
Neither Xydane or I used the bootloader, the code for it is commented and you can use it if you want. I didn't achieve to run it and just used a serial programmer (FTDI, ST-LINK).
Adding layouts and revisions
If you want to create new layouts just add them to the keymaps folder. If you prefer to develop a more complex revision just copy the bluepill70 folder, rename it and create a new keymap in /keymap.c (I tried to divide the project even more but it didn't worked).
Pinout
That's the pinout;
A5 A15 A10 A9 A8 B15 B14 B13 B12 B11 B10 B1 B0 A7 A6
B9 ESC| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10| F11| F12| PSC| PGU| PGD
B8 GRA| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ' | ¡ | BCKS | DEL
B7 TAB| Q | W | E | R | T | Y | U | I | O | P | ` | + | | HOM
B6 CAP| A | S | D | F | G | H | J | K | L | Ñ | ´ | Ç | ENTER | END
B5 LSI| < | Z | X | C | V | B | N | M | , | . | - | RSHIF | UP | FNT
A4 LCT| WIN| ALT| ESPACE | ALG| FN | RCT| LEF| DOW| RIG
And the wiring:
ISO
ANSI
It also uses:
PC13: Caps Lock led.
Backlight dual color leds, my version is for common anode that's more common, for leds with common anode just replace the palSetPad with palClearPad and viceversa.
PA1: Backlight color A.
PA0: Backlight color B.