Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes (#5532)

* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance

* Updating effect function api for future extensions

* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary

* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain

* Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes

* fix bug in quantum/rgb_matrix_drivers.c

Co-Authored-By: jackhumbert <jack.humb@gmail.com>

* update command setting to the correct default

* correct rgb config

* remove commented-out lines

* update docs for the 3737

* Update docs/feature_rgb_matrix.md

Co-Authored-By: jackhumbert <jack.humb@gmail.com>
This commit is contained in:
Jack Humbert 2019-04-08 19:57:43 -04:00 committed by Drashna Jaelre
parent bc536b9b6d
commit fa4052c26e
14 changed files with 956 additions and 16 deletions

View file

@ -114,7 +114,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
endif
endif
VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 custom
LED_MATRIX_ENABLE ?= no
ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
@ -135,6 +135,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
endif
RGB_MATRIX_ENABLE ?= no
ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
$(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
@ -151,19 +152,26 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
endif
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
OPT_DEFS += -DIS31FL3731
OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3731.c
SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
OPT_DEFS += -DIS31FL3733
OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3733.c
SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3737.c
SRC += i2c_master.c
endif
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
OPT_DEFS += -DTAP_DANCE_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c

View file

@ -52,7 +52,9 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
### IS31FL3733
### IS31FL3733/IS31FL3737
!> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`.
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:

252
drivers/issi/is31fl3737.c Normal file
View file

@ -0,0 +1,252 @@
/* Copyright 2017 Jason Williams
* Copyright 2018 Jack Humbert
* Copyright 2018 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef __AVR__
#include <avr/interrupt.h>
#include <avr/io.h>
#include <util/delay.h>
#else
#include "wait.h"
#endif
#include <string.h>
#include "i2c_master.h"
#include "progmem.h"
#include "rgb_matrix.h"
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 00 <-> GND
// 01 <-> SCL
// 10 <-> SDA
// 11 <-> VCC
// ADDR1 represents A1:A0 of the 7-bit address.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define ISSI_ADDR_DEFAULT 0x50
#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
#define ISSI_PAGE_PWM 0x01 //PG1
#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
#define ISSI_PAGE_FUNCTION 0x03 //PG3
#define ISSI_REG_CONFIGURATION 0x00 //PG3
#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
#define ISSI_REG_RESET 0x11// PG3
#define ISSI_REG_SWPULLUP 0x0F //PG3
#define ISSI_REG_CSPULLUP 0x10 //PG3
#ifndef ISSI_TIMEOUT
#define ISSI_TIMEOUT 100
#endif
#ifndef ISSI_PERSISTENCE
#define ISSI_PERSISTENCE 0
#endif
// Transfer buffer for TWITransmitData()
uint8_t g_twi_transfer_buffer[20];
// These buffers match the IS31FL3737 PWM registers.
// The control buffers match the PG0 LED On/Off registers.
// Storing them like this is optimal for I2C transfers to the registers.
// We could optimize this and take out the unused registers from these
// buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[DRIVER_COUNT][192];
bool g_pwm_buffer_update_required = false;
uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } };
bool g_led_control_registers_update_required = false;
void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data )
{
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
break;
}
#else
i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
#endif
}
void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
{
// assumes PG1 is already selected
// transmit PWM registers in 12 transfers of 16 bytes
// g_twi_transfer_buffer[] is 20 bytes
// iterate over the pwm_buffer contents at 16 byte intervals
for ( int i = 0; i < 192; i += 16 ) {
g_twi_transfer_buffer[0] = i;
// copy the data from i to i+15
// device will auto-increment register for data after the first byte
// thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
for ( int j = 0; j < 16; j++ ) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
break;
}
#else
i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
#endif
}
}
void IS31FL3737_init( uint8_t addr )
{
// In order to avoid the LEDs being driven with garbage data
// in the LED driver's PWM registers, shutdown is enabled last.
// Set up the mode and other settings, clear the PWM registers,
// then disable software shutdown.
// Unlock the command register.
IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
// Select PG0
IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
// Turn off all LEDs.
for ( int i = 0x00; i <= 0x17; i++ )
{
IS31FL3737_write_register( addr, i, 0x00 );
}
// Unlock the command register.
IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
// Select PG1
IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for ( int i = 0x00; i <= 0xBF; i++ )
{
IS31FL3737_write_register( addr, i, 0x00 );
}
// Unlock the command register.
IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
// Select PG3
IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
// Set global current to maximum.
IS31FL3737_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
// Disable software shutdown.
IS31FL3737_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
// Wait 10ms to ensure the device has woken up.
#ifdef __AVR__
_delay_ms( 10 );
#else
wait_ms(10);
#endif
}
void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
{
if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
is31_led led = g_is31_leds[index];
g_pwm_buffer[led.driver][led.r] = red;
g_pwm_buffer[led.driver][led.g] = green;
g_pwm_buffer[led.driver][led.b] = blue;
g_pwm_buffer_update_required = true;
}
}
void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
{
for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
{
IS31FL3737_set_color( i, red, green, blue );
}
}
void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
{
is31_led led = g_is31_leds[index];
uint8_t control_register_r = led.r / 8;
uint8_t control_register_g = led.g / 8;
uint8_t control_register_b = led.b / 8;
uint8_t bit_r = led.r % 8;
uint8_t bit_g = led.g % 8;
uint8_t bit_b = led.b % 8;
if ( red ) {
g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
} else {
g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
}
if ( green ) {
g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
} else {
g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
}
if ( blue ) {
g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
} else {
g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
}
g_led_control_registers_update_required = true;
}
void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
{
if ( g_pwm_buffer_update_required )
{
// Firstly we need to unlock the command register and select PG1
IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
IS31FL3737_write_pwm_buffer( addr1, g_pwm_buffer[0] );
//IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
}
g_pwm_buffer_update_required = false;
}
void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
{
if ( g_led_control_registers_update_required )
{
// Firstly we need to unlock the command register and select PG0
IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
for ( int i=0; i<24; i++ )
{
IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i] );
//IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
}
}
}

207
drivers/issi/is31fl3737.h Normal file
View file

@ -0,0 +1,207 @@
/* Copyright 2017 Jason Williams
* Copyright 2018 Jack Humbert
* Copyright 2018 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef IS31FL3737_DRIVER_H
#define IS31FL3737_DRIVER_H
#include <stdint.h>
#include <stdbool.h>
typedef struct is31_led {
uint8_t driver:2;
uint8_t r;
uint8_t g;
uint8_t b;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3737_init( uint8_t addr );
void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data );
void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
// This should not be called from an interrupt
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
#define A_1 0x00
#define A_2 0x01
#define A_3 0x02
#define A_4 0x03
#define A_5 0x04
#define A_6 0x05
#define A_7 0x08
#define A_8 0x09
#define A_9 0x0A
#define A_10 0x0B
#define A_11 0x0C
#define A_12 0x0D
#define B_1 0x10
#define B_2 0x11
#define B_3 0x12
#define B_4 0x13
#define B_5 0x14
#define B_6 0x15
#define B_7 0x18
#define B_8 0x19
#define B_9 0x1A
#define B_10 0x1B
#define B_11 0x1C
#define B_12 0x1D
#define C_1 0x20
#define C_2 0x21
#define C_3 0x22
#define C_4 0x23
#define C_5 0x24
#define C_6 0x25
#define C_7 0x28
#define C_8 0x29
#define C_9 0x2A
#define C_10 0x2B
#define C_11 0x2C
#define C_12 0x2D
#define D_1 0x30
#define D_2 0x31
#define D_3 0x32
#define D_4 0x33
#define D_5 0x34
#define D_6 0x35
#define D_7 0x38
#define D_8 0x39
#define D_9 0x3A
#define D_10 0x3B
#define D_11 0x3C
#define D_12 0x3D
#define E_1 0x40
#define E_2 0x41
#define E_3 0x42
#define E_4 0x43
#define E_5 0x44
#define E_6 0x45
#define E_7 0x48
#define E_8 0x49
#define E_9 0x4A
#define E_10 0x4B
#define E_11 0x4C
#define E_12 0x4D
#define F_1 0x50
#define F_2 0x51
#define F_3 0x52
#define F_4 0x53
#define F_5 0x54
#define F_6 0x55
#define F_7 0x58
#define F_8 0x59
#define F_9 0x5A
#define F_10 0x5B
#define F_11 0x5C
#define F_12 0x5D
#define G_1 0x60
#define G_2 0x61
#define G_3 0x62
#define G_4 0x63
#define G_5 0x64
#define G_6 0x65
#define G_7 0x68
#define G_8 0x69
#define G_9 0x6A
#define G_10 0x6B
#define G_11 0x6C
#define G_12 0x6D
#define H_1 0x70
#define H_2 0x71
#define H_3 0x72
#define H_4 0x73
#define H_5 0x74
#define H_6 0x75
#define H_7 0x78
#define H_8 0x79
#define H_9 0x7A
#define H_10 0x7B
#define H_11 0x7C
#define H_12 0x7D
#define I_1 0x80
#define I_2 0x81
#define I_3 0x82
#define I_4 0x83
#define I_5 0x84
#define I_6 0x85
#define I_7 0x88
#define I_8 0x89
#define I_9 0x8A
#define I_10 0x8B
#define I_11 0x8C
#define I_12 0x8D
#define J_1 0x90
#define J_2 0x91
#define J_3 0x92
#define J_4 0x93
#define J_5 0x94
#define J_6 0x95
#define J_7 0x98
#define J_8 0x99
#define J_9 0x9A
#define J_10 0x9B
#define J_11 0x9C
#define J_12 0x9D
#define K_1 0xA0
#define K_2 0xA1
#define K_3 0xA2
#define K_4 0xA3
#define K_5 0xA4
#define K_6 0xA5
#define K_7 0xA8
#define K_8 0xA9
#define K_9 0xAA
#define K_10 0xAB
#define K_11 0xAC
#define K_12 0xAD
#define L_1 0xB0
#define L_2 0xB1
#define L_3 0xB2
#define L_4 0xB3
#define L_5 0xB4
#define L_6 0xB5
#define L_7 0xB8
#define L_8 0xB9
#define L_9 0xBA
#define L_10 0xBB
#define L_11 0xBC
#define L_12 0xBD
#endif // IS31FL3737_DRIVER_H

View file

@ -0,0 +1,141 @@
/*
* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define DEVICE_VER 0x0000
#undef MATRIX_ROWS
#undef MATRIX_COLS
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 6
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#undef MATRIX_ROW_PINS
#undef MATRIX_COL_PINS
#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 }
#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
#define NUMBER_OF_ENCODERS 1
#define ENCODERS_PAD_A { B12 }
#define ENCODERS_PAD_B { B13 }
#define MUSIC_MAP
#undef AUDIO_VOICES
#undef C6_AUDIO
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
// #define WS2812_LED_N 2
// #define RGBLED_NUM WS2812_LED_N
// #define WS2812_TIM_N 2
// #define WS2812_TIM_CH 2
// #define PORT_WS2812 GPIOA
// #define PIN_WS2812 1
// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
//#define WS2812_EXTERNAL_PULLUP
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
#define DRIVER_COUNT 1
#define DRIVER_1_LED_TOTAL 47
#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
#define RGB_MATRIX_KEYPRESSES

175
keyboards/planck/ez/ez.c Normal file
View file

@ -0,0 +1,175 @@
/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ez.h"
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, A_12, B_12, C_12},
{0, A_11, B_11, C_11},
{0, A_10, B_10, C_10},
{0, A_9, B_9, C_9},
{0, A_8, B_8, C_8},
{0, A_7, B_7, C_7},
{0, G_12, H_12, I_12},
{0, G_11, H_11, I_11},
{0, G_10, H_10, I_10},
{0, G_9, H_9, I_9},
{0, G_8, H_8, I_8},
{0, G_7, H_7, I_7},
{0, A_6, B_6, C_6},
{0, A_5, B_5, C_5},
{0, A_4, B_4, C_4},
{0, A_3, B_3, C_3},
{0, A_2, B_2, C_2},
{0, A_1, B_1, C_1},
{0, G_6, H_6, I_6},
{0, G_5, H_5, I_5},
{0, G_4, H_4, I_4},
{0, G_3, H_3, I_3},
{0, G_2, H_2, I_2},
{0, G_1, H_1, I_1},
{0, D_12, E_12, F_12},
{0, D_11, E_11, F_11},
{0, D_10, E_10, F_10},
{0, D_9, E_9, F_9},
{0, D_8, E_8, F_8},
{0, D_7, E_7, F_7},
{0, J_12, K_12, L_12},
{0, J_11, K_11, L_11},
{0, J_10, K_10, L_10},
{0, J_9, K_9, L_9},
{0, J_8, K_8, L_8},
{0, J_7, K_7, L_7},
{0, D_6, E_6, F_6},
{0, D_5, E_5, F_5},
{0, D_4, E_4, F_4},
{0, D_3, E_3, F_3},
{0, D_2, E_2, F_2},
{0, D_1, E_1, F_1},
{0, J_6, K_6, L_6},
{0, J_5, K_5, L_5},
{0, J_4, K_4, L_4},
{0, J_3, K_3, L_3},
{0, J_2, K_2, L_2},
};
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
/*{row | col << 4}
| {x=0..224, y=0..64}
| | modifier
| | | */
{{0|(0<<4)}, {20.36*0, 21.33*0}, 1},
{{0|(1<<4)}, {20.36*1, 21.33*0}, 0},
{{0|(2<<4)}, {20.36*2, 21.33*0}, 0},
{{0|(3<<4)}, {20.36*3, 21.33*0}, 0},
{{0|(4<<4)}, {20.36*4, 21.33*0}, 0},
{{0|(5<<4)}, {20.36*5, 21.33*0}, 0},
{{4|(0<<4)}, {20.36*6, 21.33*0}, 0},
{{4|(1<<4)}, {20.36*7, 21.33*0}, 0},
{{4|(2<<4)}, {20.36*8, 21.33*0}, 0},
{{4|(3<<4)}, {20.36*9, 21.33*0}, 0},
{{4|(4<<4)}, {20.36*10,21.33*0}, 0},
{{4|(5<<4)}, {20.36*11,21.33*0}, 1},
{{1|(0<<4)}, {20.36*0, 21.33*1}, 1},
{{1|(1<<4)}, {20.36*1, 21.33*1}, 0},
{{1|(2<<4)}, {20.36*2, 21.33*1}, 0},
{{1|(3<<4)}, {20.36*3, 21.33*1}, 0},
{{1|(4<<4)}, {20.36*4, 21.33*1}, 0},
{{1|(5<<4)}, {20.36*5, 21.33*1}, 0},
{{5|(0<<4)}, {20.36*6, 21.33*1}, 0},
{{5|(1<<4)}, {20.36*7, 21.33*1}, 0},
{{5|(2<<4)}, {20.36*8, 21.33*1}, 0},
{{5|(3<<4)}, {20.36*9, 21.33*1}, 0},
{{5|(4<<4)}, {20.36*10,21.33*1}, 0},
{{5|(5<<4)}, {20.36*11,21.33*1}, 1},
{{2|(0<<4)}, {20.36*0, 21.33*2}, 1},
{{2|(1<<4)}, {20.36*1, 21.33*2}, 0},
{{2|(2<<4)}, {20.36*2, 21.33*2}, 0},
{{2|(3<<4)}, {20.36*3, 21.33*2}, 0},
{{2|(4<<4)}, {20.36*4, 21.33*2}, 0},
{{2|(5<<4)}, {20.36*5, 21.33*2}, 0},
{{6|(0<<4)}, {20.36*6, 21.33*2}, 0},
{{6|(1<<4)}, {20.36*7, 21.33*2}, 0},
{{6|(2<<4)}, {20.36*8, 21.33*2}, 0},
{{6|(3<<4)}, {20.36*9, 21.33*2}, 0},
{{6|(4<<4)}, {20.36*10,21.33*2}, 0},
{{6|(5<<4)}, {20.36*11,21.33*2}, 1},
{{3|(0<<4)}, {20.36*0, 21.33*3}, 1},
{{3|(1<<4)}, {20.36*1, 21.33*3}, 1},
{{3|(2<<4)}, {20.36*2, 21.33*3}, 1},
{{7|(3<<4)}, {20.36*3, 21.33*3}, 1},
{{7|(4<<4)}, {20.36*4, 21.33*3}, 1},
{{7|(5<<4)}, {20.36*5.5,21.33*3}, 0},
{{7|(0<<4)}, {20.36*7, 21.33*3}, 1},
{{7|(1<<4)}, {20.36*8, 21.33*3}, 1},
{{7|(2<<4)}, {20.36*9, 21.33*3}, 1},
{{3|(3<<4)}, {20.36*10,21.33*3}, 1},
{{3|(4<<4)}, {20.36*11,21.33*3}, 1}
};
void matrix_init_kb(void) {
matrix_init_user();
palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL);
palClearPad(GPIOB, 8);
palClearPad(GPIOB, 9);
}
void matrix_scan_kb(void) {
matrix_scan_user();
}
uint32_t layer_state_set_kb(uint32_t state) {
palClearPad(GPIOB, 8);
palClearPad(GPIOB, 9);
state = layer_state_set_user(state);
uint8_t layer = biton32(state);
switch (layer) {
case 3:
palSetPad(GPIOB, 9);
break;
case 4:
palSetPad(GPIOB, 8);
break;
case 6:
palSetPad(GPIOB, 9);
palSetPad(GPIOB, 8);
break;
default:
break;
}
return state;
}

107
keyboards/planck/ez/ez.h Normal file
View file

@ -0,0 +1,107 @@
/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "planck.h"
#define LAYOUT_planck_1x2uC( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ k30, k31, k32, k39, k3a, k3b }, \
{ k06, k07, k08, k09, k0a, k0b }, \
{ k16, k17, k18, k19, k1a, k1b }, \
{ k26, k27, k28, k29, k2a, k2b }, \
{ k36, k37, k38, k33, k34, k35 } \
}
#define LAYOUT_planck_1x2uR( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ k30, k31, k32, k39, k3a, k3b }, \
{ k06, k07, k08, k09, k0a, k0b }, \
{ k16, k17, k18, k19, k1a, k1b }, \
{ k26, k27, k28, k29, k2a, k2b }, \
{ k36, k37, k38, k33, k34, k35 } \
}
#define LAYOUT_planck_1x2uL( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ k30, k31, k32, k39, k3a, k3b }, \
{ k06, k07, k08, k09, k0a, k0b }, \
{ k16, k17, k18, k19, k1a, k1b }, \
{ k26, k27, k28, k29, k2a, k2b }, \
{ k36, k37, k38, k33, k34, k35 } \
}
#define LAYOUT_planck_2x2u( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ k30, k31, k32, k39, k3a, k3b }, \
{ k06, k07, k08, k09, k0a, k0b }, \
{ k16, k17, k18, k19, k1a, k1b }, \
{ k26, k27, k28, k29, k2a, k2b }, \
{ k36, k37, k38, k33, k34, k35 } \
}
#define LAYOUT_planck_grid( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
k30, k31, k32, k33, k34, k35, KC_NO, k36, k37, k38, k39, k3a \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ k30, k31, k32, k39, k3a, KC_NO }, \
{ k06, k07, k08, k09, k0a, k0b }, \
{ k16, k17, k18, k19, k1a, k1b }, \
{ k26, k27, k28, k29, k2a, k2b }, \
{ k36, k37, k38, k33, k34, k35 } \
}
#define KEYMAP LAYOUT_planck_grid
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
#define KC_LAYOUT_ortho_4x12 KC_KEYMAP

View file

@ -0,0 +1,24 @@
# project specific files
LAYOUTS += ortho_4x12
# Cortex version
MCU = STM32F303
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = no
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = no
# SERIAL_LINK_ENABLE = yes
ENCODER_ENABLE = yes
RGB_MATRIX_ENABLE = IS31FL3737

View file

@ -5,6 +5,10 @@
#define encoder_update(clockwise) encoder_update_user(uint8_t index, clockwise)
#ifdef KEYBOARD_planck_ez
#include "ez.h"
#endif
#ifdef __AVR__
#define LAYOUT_planck_mit( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
@ -50,7 +54,7 @@
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
#else
#elif KEYBOARD_planck_rev6
#define LAYOUT_planck_1x2uC( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \

View file

@ -79,7 +79,7 @@ float startup_song[][2] = STARTUP_SONG;
static void gpt_cb8(GPTDriver *gptp);
#define DAC_BUFFER_SIZE 720
#define DAC_BUFFER_SIZE 100
#ifndef DAC_SAMPLE_MAX
#define DAC_SAMPLE_MAX 65535U
#endif
@ -98,8 +98,8 @@ static void gpt_cb8(GPTDriver *gptp);
RESTART_CHANNEL_1()
#define UPDATE_CHANNEL_2_FREQ(freq) gpt7cfg1.frequency = freq * DAC_BUFFER_SIZE; \
RESTART_CHANNEL_2()
#define GET_CHANNEL_1_FREQ gpt6cfg1.frequency
#define GET_CHANNEL_2_FREQ gpt7cfg1.frequency
#define GET_CHANNEL_1_FREQ (uint16_t)(gpt6cfg1.frequency * DAC_BUFFER_SIZE)
#define GET_CHANNEL_2_FREQ (uint16_t)(gpt7cfg1.frequency * DAC_BUFFER_SIZE)
/*

View file

@ -28,7 +28,9 @@
#ifdef IS31FL3731
#include "is31fl3731.h"
#elif defined (IS31FL3733)
#include "is31fl3733.h"
#include "is31fl3733.h"
#elif defined (IS31FL3737)
#include "is31fl3737.h"
#endif
#ifndef RGB_MATRIX_LED_FLUSH_LIMIT

View file

@ -23,7 +23,7 @@
* be here if shared between boards.
*/
#if defined(IS31FL3731) || defined(IS31FL3733)
#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FL3737)
#include "i2c_master.h"
@ -33,23 +33,29 @@ static void init( void )
#ifdef IS31FL3731
IS31FL3731_init( DRIVER_ADDR_1 );
IS31FL3731_init( DRIVER_ADDR_2 );
#else
#elif defined(IS31FL3733)
IS31FL3733_init( DRIVER_ADDR_1 );
#else
IS31FL3737_init( DRIVER_ADDR_1 );
#endif
for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) {
bool enabled = true;
// This only caches it for later
#ifdef IS31FL3731
IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
#else
#elif defined(IS31FL3733)
IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
#else
IS31FL3737_set_led_control_register( index, enabled, enabled, enabled );
#endif
}
// This actually updates the LED drivers
#ifdef IS31FL3731
IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
#else
#elif defined(IS31FL3733)
IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
#else
IS31FL3737_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
#endif
}
@ -65,7 +71,7 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
.set_color = IS31FL3731_set_color,
.set_color_all = IS31FL3731_set_color_all,
};
#else
#elif defined(IS31FL3733)
static void flush( void )
{
IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
@ -77,6 +83,18 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
.set_color = IS31FL3733_set_color,
.set_color_all = IS31FL3733_set_color_all,
};
#else
static void flush( void )
{
IS31FL3737_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
}
const rgb_matrix_driver_t rgb_matrix_driver = {
.init = init,
.flush = flush,
.set_color = IS31FL3737_set_color,
.set_color_all = IS31FL3737_set_color_all,
};
#endif
#endif

View file

@ -76,7 +76,7 @@
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#define HAL_USE_I2C TRUE
#endif
/**

View file

@ -154,7 +154,7 @@
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C1 TRUE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 10