Merge pull request #932 from climbalima/master

Added ponoko svg for lets split

keyboards/maxipad/config.h

@@ -24,11 +24,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Wootpatoot
+#define MANUFACTURER    wootpatoot
 #define PRODUCT         maxipad
 #define DESCRIPTION     A custom keyboard
 
-
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 6
@@ -56,98 +55,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-// #define BACKLIGHT_PIN B7
+/* define if matrix has ghost */
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/*
+/* key combination for command */
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/maxipad/keymaps/default/Makefile

@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/maxipad/keymaps/default/config.h

@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif

keyboards/maxipad/keymaps/default/keymap.c

@@ -13,42 +13,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_SPC   \
 ),
 };
  
 const uint16_t PROGMEM fn_actions[] = {
-
 };
  
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function
 {
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
     return MACRO_NONE;
 };
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/maxipad/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default keymap for maxipad

keyboards/maxipad/maxipad.c

@@ -1,28 +1 @@
 #include "maxipad.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/maxipad/maxipad.h

@@ -8,18 +8,18 @@
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
 #define KEYMAP( \
-     k00, k01, k02, k03, k04, k05, \
+    k00, k01, k02, k03, k04, k05, \
-     k10, k11, k12, k13, k14, k15, \
+    k10, k11, k12, k13, k14, k15, \
-     k20, k21, k22, k23, k24, k25, \
+    k20, k21, k22, k23, k24, k25, \
-     k30, k31, k32, k33, k34, k35, \
+    k30, k31, k32, k33, k34, k35, \
-     k40, k41, k42, k43, k44, k45 \
+    k40, k41, k42, k43, k44, k45 \
 ) \
 { \
     { k00, k01, k02, k03, k04, k05 }, \
     { k10, k11, k12, k13, k14, k15 }, \
     { k20, k21, k22, k23, k24, k25 }, \
     { k30, k31, k32, k33, k34, k35 }, \
-    { k40, k41, k42, k43, k44, k45} \
+    { k40, k41, k42, k43, k44, k45 } \
 }
 
 #endif

keyboards/maxipad/readme.md

@@ -1,10 +1,10 @@
+Maxipad keyboard firmware
+
 ## Quantum MK Firmware
 
-For the full Quantum feature list, see [the parent readme](/).
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
-
-
-## Building
 
+If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile
 Change the config.h pinout to match your mcu!!
 
 Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
@@ -17,8 +17,8 @@ To build with the default keymap, simply run `make`.
 
 
 ### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
 
 To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
 
@@ -27,4 +27,3 @@ $ make [default|jack|<name>]
 ```
 
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
-

keyboards/maxipad/rules.mk

@@ -1,3 +1,5 @@
+
+
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -49,14 +51,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 
 
 # Build Options
-#   change yes to no to disable
+#   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES 		# MIDI controls
+# UNICODE_ENABLE ?= YES 		# Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+USE_PRO_MICRO ?= yes
 SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE ?= no            # USB Nkey Rollover