Fix build instructions in the Dactyl readme

Reflects the changes in #1784
This commit is contained in:
Erin Call 2017-11-26 12:19:29 -08:00 committed by Jack Humbert
parent 833ec84921
commit b697e1bff3

View file

@ -12,8 +12,8 @@ Linux page]. Some distributions provide a binary, maybe called
To flash the firmware:
- Build the firmware with `make handwired-dactyl-keymapname`, for example `make handwired-dactyl-default`
- This will result in a hex file called `handwired_dactyl_keymapname.hex`, e.g.
- Build the firmware with `make handwired/dactyl:<keymapname>`, for example `make handwired/dactyl:default`
- This will result in a hex file called `handwired_dactyl_<keymapname>.hex`, e.g.
`handwired_dactyl_default.hex`
- Start the teensy loader.
@ -30,7 +30,9 @@ To flash with ´teensy-loader-cli´:
- Build the firmware as above
- Run `<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymap>.hex`
- Run `<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymapname>.hex`
- If you like, you can do both at once: `make handwired/dactyl:<keymapname>:teensy`
- Put the Teensy in firmware-loading mode:
* If your current layout has a RESET key, press it.