mirror of
https://github.com/openstenoproject/qmk
synced 2024-11-14 12:34:39 +00:00
HHKB support.
This commit is contained in:
tmk
parent
2c453c7269
commit
958875247c
7 changed files with 874 additions and 9 deletions
620
Makefile.hhkb
Normal file
620
Makefile.hhkb
Normal file
|
|
@ -0,0 +1,620 @@
|
|||
# Hey Emacs, this is a -*- makefile -*-
|
||||
#----------------------------------------------------------------------------
|
||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
|
||||
#
|
||||
# Released to the Public Domain
|
||||
#
|
||||
# Additional material for this makefile was written by:
|
||||
# Peter Fleury
|
||||
# Tim Henigan
|
||||
# Colin O'Flynn
|
||||
# Reiner Patommel
|
||||
# Markus Pfaff
|
||||
# Sander Pool
|
||||
# Frederik Rouleau
|
||||
# Carlos Lamas
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device, using avrdude.
|
||||
# Please customize the avrdude settings below first!
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = tmk_hhkb
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC = tmk.c \
|
||||
usb.c \
|
||||
usb_keyboard.c \
|
||||
usb_mouse.c \
|
||||
usb_debug.c \
|
||||
keymap_hhkb.c \
|
||||
matrix_hhkb.c \
|
||||
jump_bootloader.c \
|
||||
print.c
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
#MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Output format. (can be srec, ihex, binary)
|
||||
FORMAT = ihex
|
||||
|
||||
|
||||
# Object files directory
|
||||
# To put object files in current directory, use a dot (.), do NOT make
|
||||
# this an empty or blank macro!
|
||||
OBJDIR = .
|
||||
|
||||
|
||||
# List C++ source files here. (C dependencies are automatically generated.)
|
||||
CPPSRC =
|
||||
|
||||
|
||||
# List Assembler source files here.
|
||||
# Make them always end in a capital .S. Files ending in a lowercase .s
|
||||
# will not be considered source files but generated files (assembler
|
||||
# output from the compiler), and will be deleted upon "make clean"!
|
||||
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
||||
# it will preserve the spelling of the filenames, and gcc itself does
|
||||
# care about how the name is spelled on its command-line.
|
||||
ASRC =
|
||||
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# 0 = turn off optimization. s = optimize for size.
|
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||
OPT = s
|
||||
|
||||
|
||||
# Debugging format.
|
||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
||||
# AVR Studio 4.10 requires dwarf-2.
|
||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
||||
DEBUG = dwarf-2
|
||||
|
||||
|
||||
# List any extra directories to look for include files here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRAINCDIRS =
|
||||
|
||||
|
||||
# Compiler flag to set the C Standard level.
|
||||
# c89 = "ANSI" C
|
||||
# gnu89 = c89 plus GCC extensions
|
||||
# c99 = ISO C99 standard (not yet fully implemented)
|
||||
# gnu99 = c99 plus GCC extensions
|
||||
CSTANDARD = -std=gnu99
|
||||
|
||||
|
||||
# Place -D or -U options here for C sources
|
||||
CDEFS = -DF_CPU=$(F_CPU)UL
|
||||
|
||||
|
||||
# Place -D or -U options here for ASM sources
|
||||
ADEFS = -DF_CPU=$(F_CPU)
|
||||
|
||||
|
||||
# Place -D or -U options here for C++ sources
|
||||
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
||||
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
||||
|
||||
|
||||
|
||||
#---------------- Compiler Options C ----------------
|
||||
# -g*: generate debugging information
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CFLAGS = -g$(DEBUG)
|
||||
CFLAGS += $(CDEFS)
|
||||
CFLAGS += -O$(OPT)
|
||||
CFLAGS += -funsigned-char
|
||||
CFLAGS += -funsigned-bitfields
|
||||
CFLAGS += -ffunction-sections
|
||||
CFLAGS += -fpack-struct
|
||||
CFLAGS += -fshort-enums
|
||||
CFLAGS += -Wall
|
||||
CFLAGS += -Wstrict-prototypes
|
||||
#CFLAGS += -mshort-calls
|
||||
#CFLAGS += -fno-unit-at-a-time
|
||||
#CFLAGS += -Wundef
|
||||
#CFLAGS += -Wunreachable-code
|
||||
#CFLAGS += -Wsign-compare
|
||||
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
|
||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
CFLAGS += $(CSTANDARD)
|
||||
|
||||
|
||||
#---------------- Compiler Options C++ ----------------
|
||||
# -g*: generate debugging information
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CPPFLAGS = -g$(DEBUG)
|
||||
CPPFLAGS += $(CPPDEFS)
|
||||
CPPFLAGS += -O$(OPT)
|
||||
CPPFLAGS += -funsigned-char
|
||||
CPPFLAGS += -funsigned-bitfields
|
||||
CPPFLAGS += -fpack-struct
|
||||
CPPFLAGS += -fshort-enums
|
||||
CPPFLAGS += -fno-exceptions
|
||||
CPPFLAGS += -Wall
|
||||
CPPFLAGS += -Wundef
|
||||
#CPPFLAGS += -mshort-calls
|
||||
#CPPFLAGS += -fno-unit-at-a-time
|
||||
#CPPFLAGS += -Wstrict-prototypes
|
||||
#CPPFLAGS += -Wunreachable-code
|
||||
#CPPFLAGS += -Wsign-compare
|
||||
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
|
||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
#CPPFLAGS += $(CSTANDARD)
|
||||
|
||||
|
||||
#---------------- Assembler Options ----------------
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns: create listing
|
||||
# -gstabs: have the assembler create line number information; note that
|
||||
# for use in COFF files, additional information about filenames
|
||||
# and function names needs to be present in the assembler source
|
||||
# files -- see avr-libc docs [FIXME: not yet described there]
|
||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||
# dump that will be displayed for a given single line of source input.
|
||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
|
||||
|
||||
|
||||
#---------------- Library Options ----------------
|
||||
# Minimalistic printf version
|
||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
||||
|
||||
# Floating point printf version (requires MATH_LIB = -lm below)
|
||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard printf version.
|
||||
PRINTF_LIB =
|
||||
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
||||
|
||||
|
||||
# Minimalistic scanf version
|
||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
||||
|
||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard scanf version.
|
||||
SCANF_LIB =
|
||||
#SCANF_LIB = $(SCANF_LIB_MIN)
|
||||
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
||||
|
||||
|
||||
MATH_LIB = -lm
|
||||
|
||||
|
||||
# List any extra directories to look for libraries here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRALIBDIRS =
|
||||
|
||||
|
||||
|
||||
#---------------- External Memory Options ----------------
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# used for variables (.data/.bss) and heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# only used for heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
EXTMEMOPTS =
|
||||
|
||||
|
||||
|
||||
#---------------- Linker Options ----------------
|
||||
# -Wl,...: tell GCC to pass this to linker.
|
||||
# -Map: create map file
|
||||
# --cref: add cross reference to map file
|
||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
||||
LDFLAGS += -Wl,--relax
|
||||
LDFLAGS += -Wl,--gc-sections
|
||||
LDFLAGS += $(EXTMEMOPTS)
|
||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
|
||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
||||
#LDFLAGS += -T linker_script.x
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options (avrdude) ----------------
|
||||
|
||||
# Programming hardware
|
||||
# Type: avrdude -c ?
|
||||
# to get a full listing.
|
||||
#
|
||||
AVRDUDE_PROGRAMMER = stk500v2
|
||||
|
||||
# com1 = serial port. Use lpt1 to connect to parallel port.
|
||||
AVRDUDE_PORT = com1 # programmer connected to serial device
|
||||
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||
|
||||
|
||||
# Uncomment the following if you want avrdude's erase cycle counter.
|
||||
# Note that this counter needs to be initialized first using -Yn,
|
||||
# see avrdude manual.
|
||||
#AVRDUDE_ERASE_COUNTER = -y
|
||||
|
||||
# Uncomment the following if you do /not/ wish a verification to be
|
||||
# performed after programming the device.
|
||||
#AVRDUDE_NO_VERIFY = -V
|
||||
|
||||
# Increase verbosity level. Please use this when submitting bug
|
||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
||||
# to submit bug reports.
|
||||
#AVRDUDE_VERBOSE = -v -v
|
||||
|
||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
||||
|
||||
|
||||
|
||||
#---------------- Debugging Options ----------------
|
||||
|
||||
# For simulavr only - target MCU frequency.
|
||||
DEBUG_MFREQ = $(F_CPU)
|
||||
|
||||
# Set the DEBUG_UI to either gdb or insight.
|
||||
# DEBUG_UI = gdb
|
||||
DEBUG_UI = insight
|
||||
|
||||
# Set the debugging back-end to either avarice, simulavr.
|
||||
DEBUG_BACKEND = avarice
|
||||
#DEBUG_BACKEND = simulavr
|
||||
|
||||
# GDB Init Filename.
|
||||
GDBINIT_FILE = __avr_gdbinit
|
||||
|
||||
# When using avarice settings for the JTAG
|
||||
JTAG_DEV = /dev/com1
|
||||
|
||||
# Debugging port used to communicate between GDB / avarice / simulavr.
|
||||
DEBUG_PORT = 4242
|
||||
|
||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
||||
# just set to localhost unless doing some sort of crazy debugging when
|
||||
# avarice is running on a different computer.
|
||||
DEBUG_HOST = localhost
|
||||
|
||||
|
||||
|
||||
#============================================================================
|
||||
|
||||
|
||||
# Define programs and commands.
|
||||
SHELL = sh
|
||||
CC = avr-gcc
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
SIZE = avr-size
|
||||
AR = avr-ar rcs
|
||||
NM = avr-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
REMOVEDIR = rm -rf
|
||||
COPY = cp
|
||||
WINSHELL = cmd
|
||||
|
||||
|
||||
# Define Messages
|
||||
# English
|
||||
MSG_ERRORS_NONE = Errors: none
|
||||
MSG_BEGIN = -------- begin --------
|
||||
MSG_END = -------- end --------
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_AFTER = Size after:
|
||||
MSG_COFF = Converting to AVR COFF:
|
||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||
MSG_FLASH = Creating load file for Flash:
|
||||
MSG_EEPROM = Creating load file for EEPROM:
|
||||
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||
MSG_LINKING = Linking:
|
||||
MSG_COMPILING = Compiling C:
|
||||
MSG_COMPILING_CPP = Compiling C++:
|
||||
MSG_ASSEMBLING = Assembling:
|
||||
MSG_CLEANING = Cleaning project:
|
||||
MSG_CREATING_LIBRARY = Creating library:
|
||||
|
||||
|
||||
|
||||
|
||||
# Define all object files.
|
||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
||||
|
||||
# Define all listing files.
|
||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
||||
|
||||
|
||||
# Compiler flags to generate dependency files.
|
||||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
||||
|
||||
|
||||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# Default target.
|
||||
all: begin gccversion sizebefore build sizeafter end
|
||||
|
||||
# Change the build target to build a HEX file or a library.
|
||||
build: elf hex eep lss sym
|
||||
#build: lib
|
||||
|
||||
|
||||
elf: $(TARGET).elf
|
||||
hex: $(TARGET).hex
|
||||
eep: $(TARGET).eep
|
||||
lss: $(TARGET).lss
|
||||
sym: $(TARGET).sym
|
||||
LIBNAME=lib$(TARGET).a
|
||||
lib: $(LIBNAME)
|
||||
|
||||
|
||||
|
||||
# Eye candy.
|
||||
# AVR Studio 3.x does not check make's exit code but relies on
|
||||
# the following magic strings to be generated by the compile job.
|
||||
begin:
|
||||
@echo
|
||||
@echo $(MSG_BEGIN)
|
||||
|
||||
end:
|
||||
@echo $(MSG_END)
|
||||
@echo
|
||||
|
||||
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
||||
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
|
||||
ELFSIZE = $(SIZE) $(TARGET).elf
|
||||
|
||||
sizebefore:
|
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
|
||||
2>/dev/null; echo; fi
|
||||
|
||||
sizeafter:
|
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
|
||||
2>/dev/null; echo; fi
|
||||
|
||||
|
||||
|
||||
# Display compiler version information.
|
||||
gccversion :
|
||||
@$(CC) --version
|
||||
|
||||
|
||||
|
||||
# Program the device.
|
||||
program: $(TARGET).hex $(TARGET).eep
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
|
||||
|
||||
# Generate avr-gdb config/init file which does the following:
|
||||
# define the reset signal, load the target file, connect to target, and set
|
||||
# a breakpoint at main().
|
||||
gdb-config:
|
||||
@$(REMOVE) $(GDBINIT_FILE)
|
||||
@echo define reset >> $(GDBINIT_FILE)
|
||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
||||
@echo end >> $(GDBINIT_FILE)
|
||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
|
||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
||||
ifeq ($(DEBUG_BACKEND),simulavr)
|
||||
@echo load >> $(GDBINIT_FILE)
|
||||
endif
|
||||
@echo break main >> $(GDBINIT_FILE)
|
||||
|
||||
debug: gdb-config $(TARGET).elf
|
||||
ifeq ($(DEBUG_BACKEND), avarice)
|
||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
||||
@$(WINSHELL) /c pause
|
||||
|
||||
else
|
||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
||||
endif
|
||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
||||
|
||||
|
||||
|
||||
|
||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||
COFFCONVERT = $(OBJCOPY) --debugging
|
||||
COFFCONVERT += --change-section-address .data-0x800000
|
||||
COFFCONVERT += --change-section-address .bss-0x800000
|
||||
COFFCONVERT += --change-section-address .noinit-0x800000
|
||||
COFFCONVERT += --change-section-address .eeprom-0x810000
|
||||
|
||||
|
||||
|
||||
coff: $(TARGET).elf
|
||||
@echo
|
||||
@echo $(MSG_COFF) $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
|
||||
|
||||
|
||||
extcoff: $(TARGET).elf
|
||||
@echo
|
||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
|
||||
|
||||
|
||||
|
||||
# Create final output files (.hex, .eep) from ELF output file.
|
||||
%.hex: %.elf
|
||||
@echo
|
||||
@echo $(MSG_FLASH) $@
|
||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
|
||||
|
||||
%.eep: %.elf
|
||||
@echo
|
||||
@echo $(MSG_EEPROM) $@
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
%.lss: %.elf
|
||||
@echo
|
||||
@echo $(MSG_EXTENDED_LISTING) $@
|
||||
$(OBJDUMP) -h -S -z $< > $@
|
||||
|
||||
# Create a symbol table from ELF output file.
|
||||
%.sym: %.elf
|
||||
@echo
|
||||
@echo $(MSG_SYMBOL_TABLE) $@
|
||||
$(NM) -n $< > $@
|
||||
|
||||
|
||||
|
||||
# Create library from object files.
|
||||
.SECONDARY : $(TARGET).a
|
||||
.PRECIOUS : $(OBJ)
|
||||
%.a: $(OBJ)
|
||||
@echo
|
||||
@echo $(MSG_CREATING_LIBRARY) $@
|
||||
$(AR) $@ $(OBJ)
|
||||
|
||||
|
||||
# Link: create ELF output file from object files.
|
||||
.SECONDARY : $(TARGET).elf
|
||||
.PRECIOUS : $(OBJ)
|
||||
%.elf: $(OBJ)
|
||||
@echo
|
||||
@echo $(MSG_LINKING) $@
|
||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
|
||||
|
||||
|
||||
# Compile: create object files from C source files.
|
||||
$(OBJDIR)/%.o : %.c
|
||||
@echo
|
||||
@echo $(MSG_COMPILING) $<
|
||||
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create object files from C++ source files.
|
||||
$(OBJDIR)/%.o : %.cpp
|
||||
@echo
|
||||
@echo $(MSG_COMPILING_CPP) $<
|
||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C source files.
|
||||
%.s : %.c
|
||||
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C++ source files.
|
||||
%.s : %.cpp
|
||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Assemble: create object files from assembler source files.
|
||||
$(OBJDIR)/%.o : %.S
|
||||
@echo
|
||||
@echo $(MSG_ASSEMBLING) $<
|
||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Create preprocessed source for use in sending a bug report.
|
||||
%.i : %.c
|
||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Target: clean project.
|
||||
clean: begin clean_list end
|
||||
|
||||
clean_list :
|
||||
@echo
|
||||
@echo $(MSG_CLEANING)
|
||||
$(REMOVE) $(TARGET).hex
|
||||
$(REMOVE) $(TARGET).eep
|
||||
$(REMOVE) $(TARGET).cof
|
||||
$(REMOVE) $(TARGET).elf
|
||||
$(REMOVE) $(TARGET).map
|
||||
$(REMOVE) $(TARGET).sym
|
||||
$(REMOVE) $(TARGET).lss
|
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
|
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
|
||||
$(REMOVE) $(SRC:.c=.s)
|
||||
$(REMOVE) $(SRC:.c=.d)
|
||||
$(REMOVE) $(SRC:.c=.i)
|
||||
$(REMOVEDIR) .dep
|
||||
|
||||
|
||||
# Create object files directory
|
||||
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
||||
|
||||
|
||||
# Include the dependency files.
|
||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
||||
|
||||
|
||||
# Listing of phony targets.
|
||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
||||
build elf hex eep lss sym coff extcoff \
|
||||
clean clean_list program debug gdb-config
|
||||
133
keymap_hhkb.c
Normal file
133
keymap_hhkb.c
Normal file
|
|
@ -0,0 +1,133 @@
|
|||
/*
|
||||
* keymap for modified macway keyboarq
|
||||
*/
|
||||
#include <avr/pgmspace.h>
|
||||
#include "matrix.h"
|
||||
#include "keymap_hhkb.h"
|
||||
|
||||
int current_layer = 0;
|
||||
|
||||
/*
|
||||
* Layer0(Default Layer)
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| A| S| D| F| G| H| J| K| L| ;| '|Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Fn2 |Fn1|
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui|Alt |Space |Fn3 |Gui|
|
||||
* `-------------------------------------------'
|
||||
*
|
||||
* Layer1(Fn1) HHKB mode
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Pow| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | | | +| -|End|PgD|Dow|Shift | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui |Alt |Space |Alt |Gui|
|
||||
* `--------------------------------------------'
|
||||
*
|
||||
* Layer2(Fn2) HHKB mouse mode
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | | | | | | | | | | |McU| |Backs|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| | | | | | | |MwL|MwU|McL|McR|Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | | | | |MwR|MwD|McD| | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui |Alt |Space |Mb1 |Mb2|
|
||||
* `--------------------------------------------'
|
||||
*
|
||||
* Layer3(Fn3) vi mode
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | | | | | |Hom|PgD|PgUlEnd| |MwD|MwU| |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Contro| | | | | |Lef|Dow|Up |Rig| | |Return |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | | | | |Mb2|McL|McD|McU|McR|Mb1|Mb1 | |
|
||||
* `-----------------------------------------------------------'
|
||||
* |Gui|Alt |Space | |Mb2|
|
||||
* `-------------------------------------------'
|
||||
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
|
||||
*/
|
||||
static const uint8_t PROGMEM Keymap[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// 0: default
|
||||
{
|
||||
{ KB_2, KB_Q, KB_W, KB_S, KB_A, KB_Z, KB_X, KB_C },
|
||||
{ KB_3, KB_4, KB_R, KB_E, KB_D, KB_F, KB_V, KB_B },
|
||||
{ KB_5, KB_6, KB_Y, KB_T, KB_G, KB_H, KB_N, KB_NO },
|
||||
{ KB_1, KB_ESCAPE, KB_TAB, KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
|
||||
{ KB_7, KB_8, KB_U, KB_I, KB_K, KB_J, KB_M, KB_NO },
|
||||
{ KB_BSLASH, KB_GRAVE, KB_BSPACE, KB_ENTER, FN_1, FN_2, KB_RGUI, FN_3 },
|
||||
{ KB_9, KB_0, KB_O, KB_P, KB_SCOLON, KB_L, KB_COMMA, KB_NO },
|
||||
{ KB_MINUS, KB_EQUAL, KB_RBRACKET,KB_LBRACKET,KB_QUOTE, KB_SLASH, KB_DOT, KB_NO },
|
||||
},
|
||||
// 1: FN_1(HHKB Fn) HHKB mode
|
||||
{
|
||||
{ KB_F2, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, },
|
||||
{ KB_F3, KB_F4, KB_NO, KB_NO, KB_MUTE, KB_F20, KB_NO, KB_NO, },
|
||||
{ KB_F5, KB_F6, KB_NO, KB_NO, KB_NO, KP_ASTERISK,KP_PLUS, KB_NO },
|
||||
{ KB_F1, KB_POWER, KB_CAPSLOCK,KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
|
||||
{ KB_F7, KB_F8, KB_NO, KB_PSCREEN, KB_HOME, KP_SLASH, KB_MINUS, KB_NO },
|
||||
{ KB_INSERT, KB_DELETE, KB_BSPACE, KP_ENTER, KB_NO, KB_RSHIFT, KB_RGUI, KB_RALT },
|
||||
{ KB_F9, KB_F10, KB_SCKLOCK, KB_BREAK, KB_LEFT, KB_PGUP, KB_END, KB_NO },
|
||||
{ KB_F11, KB_F12, KB_NO, KB_UP, KB_RIGHT, KB_DOWN, KB_PGDOWN, KB_NO },
|
||||
},
|
||||
// 2: FN_2(Right Shift) HHKB mouse mode
|
||||
{
|
||||
{ KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, },
|
||||
{ KB_NO, KB_NO, KB_NO, KB_NO, KB_MUTE, KB_NO, KB_NO, KB_NO, },
|
||||
{ KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO },
|
||||
{ KB_NO, KB_ESCAPE, KB_TAB, KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
|
||||
{ KB_NO, KB_NO, KB_NO, KB_NO, MS_WH_LEFT, KP_SLASH, KB_MINUS, KB_NO },
|
||||
{ KB_NO, KB_NO, KB_BSPACE, KB_ENTER, KB_NO, KB_NO, MS_BTN2, MS_BTN1 },
|
||||
{ KB_NO, KB_NO, KB_NO, KB_NO, MS_LEFT, MS_WH_DOWN, MS_WH_RIGHT,KB_NO },
|
||||
{ KB_NO, KB_NO, KB_NO, MS_UP, MS_RIGHT, MS_DOWN, MS_WH_UP, KB_NO },
|
||||
},
|
||||
// 3: FN_3(Right Alt) vi mode
|
||||
{
|
||||
{ KB_F2, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, },
|
||||
{ KB_F3, KB_F4, KB_NO, KB_NO, KB_NO, KB_F20, KB_NO, KB_NO, },
|
||||
{ KB_F5, KB_F6, KB_HOME, KB_NO, KB_NO, KB_LEFT, MS_LEFT, KB_NO },
|
||||
{ KB_F1, KB_ESCAPE, KB_TAB, KB_LCTRL, KB_LSHIFT, KB_LGUI, KB_LALT, KB_SPACE },
|
||||
{ KB_F7, KB_F8, KB_PGDOWN, KB_PGUP, KB_UP, KB_DOWN, MS_DOWN, KB_NO },
|
||||
{ KB_INSERT, KB_NO, KB_BSPACE, KB_ENTER, KB_NO, MS_BTN1, MS_BTN2, KB_NO },
|
||||
{ KB_F9, KB_F10, KB_END, KB_NO, KB_NO, KB_RIGHT, MS_UP, KB_NO },
|
||||
{ KB_F11, KB_F12, MS_WH_DOWN, MS_WH_UP, KB_NO, MS_BTN1, MS_RIGHT, KB_NO },
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
uint8_t get_keycode(int layer, int row, int col)
|
||||
{
|
||||
if (row >= MATRIX_ROWS)
|
||||
return KB_NO;
|
||||
if (col >= MATRIX_COLS)
|
||||
return KB_NO;
|
||||
return pgm_read_byte(&Keymap[layer][row][col]);
|
||||
}
|
||||
|
||||
int get_layer(void) {
|
||||
int layer = 0;
|
||||
for (int row = 0; row < MATRIX_ROWS; row++) {
|
||||
for (int col = 0; col < MATRIX_ROWS; col++) {
|
||||
if (matrix[row] & 1<<col) continue;
|
||||
if (get_keycode(0, row, col) == FN_1) layer = ((layer == 0 || layer > 1) ? 1 : layer);
|
||||
if (get_keycode(0, row, col) == FN_2) layer = ((layer == 0 || layer > 2) ? 2 : layer);
|
||||
if (get_keycode(0, row, col) == FN_3) layer = ((layer == 0 || layer > 3) ? 3 : layer);
|
||||
}
|
||||
}
|
||||
current_layer = layer;
|
||||
return current_layer;
|
||||
}
|
||||
13
keymap_hhkb.h
Normal file
13
keymap_hhkb.h
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
#ifndef KEYMAP_H
|
||||
#define KEYMAP_H 1
|
||||
|
||||
#include <stdint.h>
|
||||
#include "usb_keycodes.h"
|
||||
|
||||
int get_layer(void);
|
||||
uint8_t get_keycode(int layer, int row, int col);
|
||||
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
#endif
|
||||
94
matrix_hhkb.c
Normal file
94
matrix_hhkb.c
Normal file
|
|
@ -0,0 +1,94 @@
|
|||
/*
|
||||
* scan matrix
|
||||
*/
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include "keymap.h"
|
||||
#include "matrix.h"
|
||||
#include "print.h"
|
||||
|
||||
// matrix is active low. (key on: 0/key off: 1)
|
||||
//
|
||||
// HHKB has no ghost and no bounce.
|
||||
// row: HC4051 select input channel(0-8)
|
||||
// PB0, PB1, PB2(A, B, C)
|
||||
// col: LS145 select low output line(0-8)
|
||||
// PB3, PB4, PB5, PB6(A, B, C, D)
|
||||
// use D as ENABLE: (enable: 0/unenable: 1)
|
||||
// key: KEY: (on: 0/ off:1)
|
||||
// UNKNOWN: unknown whether input or output
|
||||
// PE6,PE7(KEY, UNKNOWN)
|
||||
#define COL_ENABLE (1<<6)
|
||||
#define KEY_SELELCT(ROW, COL) (PORTB = COL_ENABLE|(((COL)&0x07)<<3)|((ROW)&0x07))
|
||||
#define KEY_ENABLE (PORTB &= ~COL_ENABLE)
|
||||
#define KEY_UNABLE (PORTB |= COL_ENABLE)
|
||||
#define KEY_ON ((PINE&(1<<6)) ? false : true)
|
||||
|
||||
// matrix state buffer
|
||||
uint8_t *matrix;
|
||||
uint8_t *matrix_prev;
|
||||
static uint8_t _matrix0[MATRIX_ROWS];
|
||||
static uint8_t _matrix1[MATRIX_ROWS];
|
||||
|
||||
|
||||
// this must be called once before matrix_scan.
|
||||
void matrix_init(void)
|
||||
{
|
||||
// row & col output(PB0-6)
|
||||
DDRB = 0xFF;
|
||||
PORTB = KEY_SELELCT(0, 0);
|
||||
// key input(KEY/VALID)
|
||||
DDRE = 0x3F;
|
||||
PORTE = 0x00;
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (int i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0xFF;
|
||||
for (int i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0xFF;
|
||||
matrix = _matrix0;
|
||||
matrix_prev = _matrix1;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
uint8_t state;
|
||||
uint8_t *tmp;
|
||||
|
||||
tmp = matrix_prev;
|
||||
matrix_prev = matrix;
|
||||
matrix = tmp;
|
||||
|
||||
for (int row = 0; row < MATRIX_ROWS; row++) {
|
||||
for (int col = 0; col < MATRIX_COLS; col++) {
|
||||
//print("scan: "); phex(row); phex(col); print("\n");
|
||||
KEY_SELELCT(row, col);
|
||||
_delay_us(50); // from logic analyzer chart
|
||||
KEY_ENABLE;
|
||||
_delay_us(10); // from logic analyzer chart
|
||||
//print("PINE: "); phex(PINE); print("\n");
|
||||
if (KEY_ON) {
|
||||
matrix[row] &= ~(1<<col);
|
||||
} else {
|
||||
matrix[row] |= (1<<col);
|
||||
}
|
||||
KEY_UNABLE;
|
||||
_delay_us(150); // from logic analyzer chart
|
||||
}
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void) {
|
||||
for (int i=0; i <MATRIX_ROWS; i++) {
|
||||
if (matrix[i] != matrix_prev[i])
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
bool matrix_has_ghost(void) {
|
||||
return false;
|
||||
}
|
||||
|
||||
bool matrix_has_ghost_in_row(uint8_t row) {
|
||||
return false;
|
||||
}
|
||||
21
tmk.c
21
tmk.c
|
|
@ -34,7 +34,7 @@
|
|||
#include "usb_mouse.h"
|
||||
#include "print.h"
|
||||
#include "matrix.h"
|
||||
#include "keymap.h"
|
||||
#include "keymap_hhkb.h"
|
||||
#include "jump_bootloader.h"
|
||||
|
||||
|
||||
|
|
@ -46,7 +46,7 @@
|
|||
|
||||
#define MOUSE_MOVE_UNIT 10
|
||||
#define MOUSE_DELAY_MS 200
|
||||
#define MOUSE_DELAY_ACC 4
|
||||
#define MOUSE_DELAY_ACC 5
|
||||
|
||||
|
||||
static void print_matrix(void);
|
||||
|
|
@ -99,7 +99,7 @@ int main(void)
|
|||
int8_t mouse_hwheel = 0;
|
||||
int mouse_repeat = 0;
|
||||
|
||||
print("\nt.m.k. keyboard 1.0\n");
|
||||
print("\nt.m.k. keyboard 1.0 for hhkb\n");
|
||||
while (1) {
|
||||
matrix_scan();
|
||||
modified = matrix_is_modified();
|
||||
|
|
@ -110,12 +110,13 @@ int main(void)
|
|||
if (modified) {
|
||||
print_matrix();
|
||||
|
||||
// LED flash for debug
|
||||
LED_CONFIG;
|
||||
LED_ON;
|
||||
}
|
||||
|
||||
keyboard_modifier_keys = 0;
|
||||
for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO;
|
||||
for (int i = 0; i < 3; i++) keyboard_keys[i] = KB_NO;
|
||||
key_index = 0;
|
||||
mouse_x = 0;
|
||||
mouse_y = 0;
|
||||
|
|
@ -136,10 +137,10 @@ int main(void)
|
|||
keyboard_modifier_keys |= 1<<(code & 0x07);
|
||||
} else if (code >= MS_UP) {
|
||||
// mouse
|
||||
if (code == MS_UP) mouse_y -= MOUSE_MOVE_UNIT;
|
||||
if (code == MS_DOWN) mouse_y += MOUSE_MOVE_UNIT;
|
||||
if (code == MS_LEFT) mouse_x -= MOUSE_MOVE_UNIT;
|
||||
if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT;
|
||||
if (code == MS_UP) mouse_y -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
|
||||
if (code == MS_DOWN) mouse_y += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
|
||||
if (code == MS_LEFT) mouse_x -= MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
|
||||
if (code == MS_RIGHT) mouse_x += MOUSE_MOVE_UNIT + (mouse_repeat < 50 ? mouse_repeat/5 : 10);
|
||||
if (code == MS_BTN1) mouse_btn |= 1<<0;
|
||||
if (code == MS_BTN2) mouse_btn |= 1<<1;
|
||||
if (code == MS_BTN3) mouse_btn |= 1<<2;
|
||||
|
|
@ -189,6 +190,10 @@ int main(void)
|
|||
//Rollover
|
||||
}
|
||||
usb_keyboard_send();
|
||||
|
||||
// LED flash for debug
|
||||
LED_CONFIG;
|
||||
LED_OFF;
|
||||
}
|
||||
}
|
||||
_delay_ms(2);
|
||||
|
|
|
|||
2
usb.c
2
usb.c
|
|
@ -47,7 +47,7 @@
|
|||
// INF file is needed to load the driver. These numbers need to
|
||||
// match the INF file.
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0xBABE
|
||||
#define PRODUCT_ID 0xCAFE
|
||||
|
||||
|
||||
// USB devices are supposed to implment a halt feature, which is
|
||||
|
|
|
|||
Loading…
Reference in a new issue