Merge remote-tracking branch 'origin/master' into develop

keyboards/keebio/bigswitchseat/bigswitchseat.c

@@ -0,0 +1,4 @@
+// Copyright 2021 Danny Nguyen (@nooges)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bigswitchseat.h"

keyboards/keebio/bigswitchseat/bigswitchseat.h

@@ -0,0 +1,12 @@
+// Copyright 2021 Danny Nguyen (@nooges)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00 \
+) { \
+    { k00 }  \
+}

keyboards/keebio/bigswitchseat/config.h

@@ -0,0 +1,86 @@
+// Copyright 2021 Danny Nguyen (@nooges)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xCB10
+#define PRODUCT_ID   0x1011
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Keebio
+#define PRODUCT      Big Switch Seat
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/*
+ * Keyboard Matrix Assignments
+ */
+
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { F0 }
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/keebio/bigswitchseat/info.json

@@ -0,0 +1,10 @@
+{
+    "keyboard_name": "Big Switch Seat",
+    "url": "https://robotcandy.company/",
+    "maintainer": "nooges",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x": 0, "y": 0, "w": 4, "h": 4}]
+        }
+    }
+}

keyboards/keebio/bigswitchseat/keymaps/default/keymap.c

@@ -0,0 +1,27 @@
+// Copyright 2021 Danny Nguyen (@nooges)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _MAIN,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_MAIN] = LAYOUT(
+        KC_A
+    ),
+    [_FN1] = LAYOUT(
+        _______
+    ),
+    [_FN2] = LAYOUT(
+        _______
+    ),
+    [_FN3] = LAYOUT(
+        _______
+    )
+};

keyboards/keebio/bigswitchseat/keymaps/default/rules.mk

@@ -0,0 +1 @@
+LTO_ENABLE = yes

keyboards/keebio/bigswitchseat/keymaps/via/keymap.c

@@ -0,0 +1,27 @@
+// Copyright 2021 Danny Nguyen (@nooges)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _MAIN,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_MAIN] = LAYOUT(
+        KC_A
+    ),
+    [_FN1] = LAYOUT(
+        _______
+    ),
+    [_FN2] = LAYOUT(
+        _______
+    ),
+    [_FN3] = LAYOUT(
+        _______
+    )
+};

keyboards/keebio/bigswitchseat/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/keebio/bigswitchseat/readme.md

@@ -0,0 +1,25 @@
+# Big Switch Seat
+
+PCB for the Big Switch.
+
+* Keyboard Maintainer: [Keebio](https://github.com/nooges)
+* Hardware Supported: Big Switch Seat PCB
+* Hardware Availability: [Robot Candy Company](https://robotcandy.company/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make keebio/bigswitchseat:default
+
+Flashing example for this keyboard:
+
+    make keebio/bigswitchseat:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/keebio/bigswitchseat/rules.mk

@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output