opensteno_qmk/users/spidey3/rules.mk

BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
CONSOLE_ENABLE = yes   # Console for debug
BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
LTO_ENABLE = yes

SRC += init.c
SRC += spidey3.c

ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
  SRC += layer_rgb.c
endif
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
  SRC += unicode.c
endif
Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta 2021-08-07 06:59:56 +00:00			`BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite`
[Keymap] Revamp spidey3 userspace and keymaps (#11768) * Don't block keys during startup animation * More refinements related to startup and debug state * restore key logging * some cleanup on scan rate reporting * trim some fat * better lighting to indicate jumped to bootloader * use eeprom for state restoration * a little reorganization * report version immediately when turn on debug * hold-to-adjust for hue, sat, val * cformat * reorg rules.mk settings, fix compile with CONSOLE_ENABLE=no * simplify spidey3 userspace * NULL in layer list caused buggy behavior * more bugfix * update numpad layout to match matt30 MT3 /dev/tty keycaps * swap emdash and endash * map shift+backspace to delete * removing NO_ACTION_ONSHOT makes the firmware SMALLER ?! * cformat * improve spi_glow * disable shift-backspace = delete by default 2021-02-06 21:04:25 +00:00			`CONSOLE_ENABLE = yes # Console for debug`
			`BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality`
Major enhancements to spidey3 keymaps and userspace (#9261) * Add Chrome OS specific keys to 75_ansi/spidey3 * Clean up duplicative settings in rules.mk * Refactor spidey3 userspace to use rgb layer blink * Blink green on wakeup * Improve _FN layer indicator * Glyph transformation modes: wide, script, fraktur, and enclosed characters * Add spider unicode glyph * Fix compile error when NO_ACTION_ONESHOT * Add a few more emoji * Further refinement of lighting layer usage * Fix reversed yes/no ack * Lighting layers override RGB off * Fix missing wide and incorrect script numbers * Add LOL and surprise emoji * Add missing break in switch statement * Trim firmware size * Use usage ID definitions in report.h * Some minor whitespace cleanup * Disable some unused features to reduce firmware size * Print version on startup * Seed rand() on first keystroke * Add a key to immediately sleep CrOS * Switch to Bootmagic Lite * Trim down firmware size a little bit more * Make RGBLIGHT_MODE_TWINKLE+4 my default * Scan rate debug / fix version printing Delay printing version on startup (console may not be ready) Better scan rate reporting * Disable locking caps, etc. to save more space * Enable LTO * Better seed for rand() * Set MAX_LAYER for some performance improvement * Another scan rate improvement * Set manufacturer * New startup animation * Add GUI lock for F-keys (for CrOS) * Add visual indication for glyph replacement and F-keys GUI lock * Some cleanup; run cformat on spidey3 userspace * Cycle between debug verbosity options * Fix disable RGB Lighting after wakeup on Mac 2020-06-05 09:01:47 +00:00			`LTO_ENABLE = yes`
[Keymap] Add spidey3 keymap for 75_ansi, and a spidey3 userspace (#8470) * First cut at Josh Diamond's KBD75 customizations. Includes: * My unique keymap with ChromeOS specific keys * Use RGB underglow to indicate Caps Lock * Some unicode bindings * Some changes to make debugging easier * Updated spidey3 to be applicable to all 75_ansi boards * Sadly, ChromeOS doesn't pay attention to most consumer codes * Add mac layer; fix flakeyness in CAPS_LOCK underglow. * Make layers.json match the keymap (to the extent possible) * Major cleanup; fix broken debug persistence * Cleanup some whitespace issues * Fix incorrect log message. * Rework layer indication to user RGBLIGHT_LAYERS * Update layouts/community/75_ansi/spidey3/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Rename users/spidey3/rgblight.c to layer_rgb.c per suggestion * Refactor to use set_single_persistant_default_layer(). * Use dprint/f to make logging more elegant. * Update users/spidey3/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update users/spidey3/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update layouts/community/75_ansi/spidey3/rules.mk Co-Authored-By: Ryan <fauxpark@gmail.com> * Update users/spidey3/spidey3.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update users/spidey3/layer_rgb.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update users/spidey3/init.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Changes from code review Co-authored-by: Joshua Diamond <jdiamond@Deep-Thought.local> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> 2020-03-23 04:11:41 +00:00
			`SRC += init.c`
			`SRC += spidey3.c`

			`ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)`
			`SRC += layer_rgb.c`
			`endif`
			`ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)`
			`SRC += unicode.c`
			`endif`