opensteno_qmk/drivers/avr/serial.h

63 lines
2.1 KiB
C
Raw Normal View History

Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 18:08:14 +00:00
#pragma once
Lets split eh (#3120) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 02:25:02 +00:00
#include <stdbool.h>
Make quantum/split_common/serial.[ch] configurable (#4419) * add temporary compile test shell script * add 'CONFIG_H += serial_backward_compatibility.h' into common_features.mk:SPLIT_KEYBOARD block * add quantum/split_common/serial_backward_compatibility.h SERIAL_PIN_PORT and other PIN define move to serial_backward_compatibility.h SERIAL_BACKLIT_START move to split_util.h * quantum/split_common/serial.c change to helix-serial.c style serial configuration * add temporary file quantum/split_common/split-keyboards-list.txt * add '#define SOFT_SERIAL_PIN D0' to keyboards/6lit/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/divergetm2/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/ergotravel/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/foobar/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/dactyl_manuform/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/qc60/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/handwired/xealous/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/iris/rev*/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/lets_split_eh/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/levinson/rev*/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/miniaxe/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/nyquist/rev?/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/quefrency/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/qwertyydox/config.h,keyboards/qwertyydox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/redox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/rorschach/rev1/config.h * remove '#define SOFT_SERIAL_PIN D0' from quantum/split_common/serial_backward_compatibility.h * remove temporary file quantum/split_common/split-keyboards-list.txt * remove temporary compile test shell script * Revert "remove temporary compile test shell script" This reverts commit 15b0021b4092127b8d8a21f572642ad3702b46d4. * update quantum/split_common/compile_split_test.sh for new keyboard test * add '#define SOFT_SERIAL_PIN D0' to keyboards/diverge3/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/40percentclub/25/config.h * remove temporary compile test shell script * update docs/config_options.md, quantum/template/avr/config.h * fix quantum/template/avr/config.h * fix typo docs/config_options.md
2018-12-14 19:00:10 +00:00
// /////////////////////////////////////////////////////////////////
// Need Soft Serial defines in config.h
// /////////////////////////////////////////////////////////////////
// ex.
// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
// // 1: about 137kbps (default)
// // 2: about 75kbps
// // 3: about 39kbps
// // 4: about 26kbps
// // 5: about 20kbps
Make quantum/split_common/serial.[ch] configurable (#4419) * add temporary compile test shell script * add 'CONFIG_H += serial_backward_compatibility.h' into common_features.mk:SPLIT_KEYBOARD block * add quantum/split_common/serial_backward_compatibility.h SERIAL_PIN_PORT and other PIN define move to serial_backward_compatibility.h SERIAL_BACKLIT_START move to split_util.h * quantum/split_common/serial.c change to helix-serial.c style serial configuration * add temporary file quantum/split_common/split-keyboards-list.txt * add '#define SOFT_SERIAL_PIN D0' to keyboards/6lit/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/divergetm2/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/ergotravel/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/foobar/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/dactyl_manuform/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/qc60/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/handwired/xealous/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/iris/rev*/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/lets_split_eh/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/levinson/rev*/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/miniaxe/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/nyquist/rev?/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/quefrency/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/qwertyydox/config.h,keyboards/qwertyydox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/redox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/rorschach/rev1/config.h * remove '#define SOFT_SERIAL_PIN D0' from quantum/split_common/serial_backward_compatibility.h * remove temporary file quantum/split_common/split-keyboards-list.txt * remove temporary compile test shell script * Revert "remove temporary compile test shell script" This reverts commit 15b0021b4092127b8d8a21f572642ad3702b46d4. * update quantum/split_common/compile_split_test.sh for new keyboard test * add '#define SOFT_SERIAL_PIN D0' to keyboards/diverge3/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/40percentclub/25/config.h * remove temporary compile test shell script * update docs/config_options.md, quantum/template/avr/config.h * fix quantum/template/avr/config.h * fix typo docs/config_options.md
2018-12-14 19:00:10 +00:00
//
// //// USE simple API (using signle-type transaction function)
// /* nothing */
// //// USE flexible API (using multi-type transaction function)
// #define SERIAL_USE_MULTI_TRANSACTION
//
// /////////////////////////////////////////////////////////////////
Split common (#3429) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN" * Fixed split_common assuming I2C for RGB and Backlight. Added serial backlight support (stole from bakingpy's Levinson code ;) ) Serial RGB not implemented yet. Also Added "USE_IC2" to the lets_split_eh/eh as that was looked over. * Fixed stupid mistake, forgot to set BACKLIT_DIRTY to false after setting slave backlit settings for serial * Updated backlight data block to be cleaner (thanks drashna ;) )
2018-07-17 18:54:07 +00:00
// Soft Serial Transaction Descriptor
2019-08-30 18:19:03 +00:00
typedef struct _SSTD_t {
uint8_t *status;
2019-08-30 18:19:03 +00:00
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
2019-08-30 18:19:03 +00:00
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
2019-08-30 18:19:03 +00:00
#define TID_LIMIT(table) (sizeof(table) / sizeof(SSTD_t))
Lets split eh (#3120) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 02:25:02 +00:00
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
Lets split eh (#3120) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 02:25:02 +00:00
// initiator resullt
#define TRANSACTION_END 0
#define TRANSACTION_NO_RESPONSE 0x1
2019-08-30 18:19:03 +00:00
#define TRANSACTION_DATA_ERROR 0x2
#define TRANSACTION_TYPE_ERROR 0x4
#ifndef SERIAL_USE_MULTI_TRANSACTION
2019-08-30 18:19:03 +00:00
int soft_serial_transaction(void);
#else
2019-08-30 18:19:03 +00:00
int soft_serial_transaction(int sstd_index);
Lets split eh (#3120) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 02:25:02 +00:00
#endif
// target status
// *SSTD_t.status has
// initiator:
// TRANSACTION_END
// or TRANSACTION_NO_RESPONSE
// or TRANSACTION_DATA_ERROR
// target:
// TRANSACTION_DATA_ERROR
// or TRANSACTION_ACCEPTED
#define TRANSACTION_ACCEPTED 0x8
#ifdef SERIAL_USE_MULTI_TRANSACTION
2019-08-30 18:19:03 +00:00
int soft_serial_get_and_clean_status(int sstd_index);
#endif