opensteno_qmk/keyboards/gmmk/pro/ansi/readme.md

# GMMK PRO (ANSI)

A tenkeyless 75% keyboard made and sold by Glorious LLC. Equipped with the STM32 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. [More info at Glorious](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation)

* Keyboard Maintainer: [GloriousThrall](https://github.com/GloriousThrall)
* Hardware Supported: GMMK Pro
* Hardware Availability: [GloriousPCGaming.com](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation)

Make example for this keyboard (after setting up your build environment):

    make gmmk/pro/ansi:default

Flashing example for this keyboard:

    make gmmk/pro/ansi:default:flash

To reset the board into bootloader mode, do one of the following:

* Hold the Reset switch mounted on the bottom side of the PCB while connecting the USB cable
* Hold the Escape key while connecting the USB cable (also erases persistent settings)
* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Case Screw Replacements

Many users report stripped case screws when disassembling the board.

The stock case screws are:
* Thread: M2
* Thread length: ~5 mm
* Head diameter: ~3.8 mm
* Head counterbore diameter: ~4.0 mm
* Head counterbore depth: ~1.9 mm

Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore.
For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).