qmk_firmware/keyboards/aleblazer/zodiark/rules.mk
Aleblazer 86e28b4db8
Adding Zodiark Split keyboard (#11837)
* Adding Files for Zodiark

* zodiark.h and keymap.c layout corrections

* Apply suggestions from code review

Applied all suggestions from zvecr.

Co-authored-by: Joel Challis <git@zvecr.com>

* Applied all suggestions from fauxpark

Co-authored-by: Ryan <fauxpark@gmail.com>

* Defined matrix driver

* Update keymap with GPL2

* Added GPL2+ to All keymap.c, cleaned up config.h, and removed the rgbmatrixwip keymap

* Apply suggestions from code review

Removed the two lines from the config.h and changed to the smaller resolution picture on the Readme.

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

* Added VIA keymap

* Corrected VIA Keymap oled.c

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-03-06 18:56:48 +00:00

27 lines
1.1 KiB
Makefile

# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
OLED_DRIVER_ENABLE = yes # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C
ENCODER_ENABLE = yes
SPLIT_KEYBOARD = yes
LTO_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812