darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/peiorisboards/ixora
History
Joel Challis e34af631c2
Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705) 
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'

* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'

* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
2020-01-10 01:31:01 +00:00
..
boards/GENERIC_STM32_F042X6 [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
keymaps [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
bootloader_defs.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
chconf.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
config.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
halconf.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
info.json [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
ixora.c [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
ixora.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
mcuconf.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
readme.md [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
rules.mk Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705) 2020-01-10 01:31:01 +00:00

readme.md

Ixora

Ixora

Ixora is an ARM-powered 6-key macropad with a USB connector, hotswap sockets, and indicator LEDs.

Keyboard Maintainer: Peioris
Hardware Supported: Ixora PCB
Hardware Availability: Peioris

Make example for this keyboard (after setting up your build environment):

make peiorisboards/ixora:default:dfu-util

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).