History

Ryan 21ed9b4575 Simplify more feature driver defines (#22090 )		2023-09-25 13:06:42 +10:00
..
keymaps	RESET -> QK_BOOT default keymaps (#17037 )	2022-05-15 20:26:27 +01:00
ktr1010	Move `RGBLED_NUM` to data driven (#21278 )	2023-06-18 14:39:07 +10:00
ws2812	Simplify more feature driver defines (#22090 )	2023-09-25 13:06:42 +10:00
chconf.h
config.h	Simplify more feature driver defines (#22090 )	2023-09-25 13:06:42 +10:00
halconf.h
info.json	Move split space/backspace layouts to data driven (#20356 )	2023-04-08 19:27:11 +10:00
mcuconf.h
meridian.c	Move split space/backspace layouts to data driven (#20356 )	2023-04-08 19:27:11 +10:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rules.mk	Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353 )	2023-06-23 20:31:25 +01:00

readme.md

ai03 x PrimeKB Meridian

Keyboard Maintainer: Holten Campbell
Hardware Supported: STM32F072CBT6

Compiling firmware and flashing

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

Bootmagic reset: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or
Physical reset button: press the button on the bottom of the PCB; or
Keycode in layout: press the key mapped to QK_BOOT if it is available (Escape key on layer 1 in the default layout).

Compile firmware

The Meridian PCB was delivered in two variants, equal in design but using different RGB LED models: one using WS2812 and another using KTR1010 LEDs. Both can be compiled using

make primekb/meridian/ws1812:default
make primekb/meridian/ktr1010:default

After compiling, enter bootloader in the PCB and flash the firmware using dfu-util or QMK Toolbox. For direct compile-and-flashing, put the PCB in DFU state and use

make primekb/meridian/ws1812:default:flash
make primekb/meridian/ktr1010:default:flash

VIA-supported firmwares are also available.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.