forked from mirrors/qmk_firmware
1f2b1dedcc
* Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation.
128 lines
6 KiB
C
128 lines
6 KiB
C
// Copyright 2021 Nick Brassel (@tzarc)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "qp_internal.h"
|
|
#include "qp_comms.h"
|
|
#include "qp_ili9341.h"
|
|
#include "qp_ili9xxx_opcodes.h"
|
|
#include "qp_tft_panel.h"
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9341_SPI_ENABLE
|
|
# include <qp_comms_spi.h>
|
|
#endif // QUANTUM_PAINTER_ILI9341_SPI_ENABLE
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Common
|
|
|
|
// Driver storage
|
|
tft_panel_dc_reset_painter_device_t ili9341_drivers[ILI9341_NUM_DEVICES] = {0};
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Initialization
|
|
|
|
bool qp_ili9341_init(painter_device_t device, painter_rotation_t rotation) {
|
|
// clang-format off
|
|
const uint8_t ili9341_init_sequence[] = {
|
|
// Command, Delay, N, Data[N]
|
|
ILI9XXX_CMD_RESET, 120, 0,
|
|
ILI9XXX_CMD_SLEEP_OFF, 5, 0,
|
|
ILI9XXX_POWER_CTL_A, 0, 5, 0x39, 0x2C, 0x00, 0x34, 0x02,
|
|
ILI9XXX_POWER_CTL_B, 0, 3, 0x00, 0xD9, 0x30,
|
|
ILI9XXX_POWER_ON_SEQ_CTL, 0, 4, 0x64, 0x03, 0x12, 0x81,
|
|
ILI9XXX_SET_PUMP_RATIO_CTL, 0, 1, 0x20,
|
|
ILI9XXX_SET_POWER_CTL_1, 0, 1, 0x26,
|
|
ILI9XXX_SET_POWER_CTL_2, 0, 1, 0x11,
|
|
ILI9XXX_SET_VCOM_CTL_1, 0, 2, 0x35, 0x3E,
|
|
ILI9XXX_SET_VCOM_CTL_2, 0, 1, 0xBE,
|
|
ILI9XXX_DRV_TIMING_CTL_A, 0, 3, 0x85, 0x10, 0x7A,
|
|
ILI9XXX_DRV_TIMING_CTL_B, 0, 2, 0x00, 0x00,
|
|
ILI9XXX_SET_BRIGHTNESS, 0, 1, 0xFF,
|
|
ILI9XXX_ENABLE_3_GAMMA, 0, 1, 0x00,
|
|
ILI9XXX_SET_GAMMA, 0, 1, 0x01,
|
|
ILI9XXX_SET_PGAMMA, 0, 15, 0x0F, 0x29, 0x24, 0x0C, 0x0E, 0x09, 0x4E, 0x78, 0x3C, 0x09, 0x13, 0x05, 0x17, 0x11, 0x00,
|
|
ILI9XXX_SET_NGAMMA, 0, 15, 0x00, 0x16, 0x1B, 0x04, 0x11, 0x07, 0x31, 0x33, 0x42, 0x05, 0x0C, 0x0A, 0x28, 0x2F, 0x0F,
|
|
ILI9XXX_SET_PIX_FMT, 0, 1, 0x05,
|
|
ILI9XXX_SET_FRAME_CTL_NORMAL, 0, 2, 0x00, 0x1B,
|
|
ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x0A, 0xA2,
|
|
ILI9XXX_CMD_PARTIAL_OFF, 0, 0,
|
|
ILI9XXX_CMD_DISPLAY_ON, 20, 0
|
|
};
|
|
// clang-format on
|
|
qp_comms_bulk_command_sequence(device, ili9341_init_sequence, sizeof(ili9341_init_sequence));
|
|
|
|
// Configure the rotation (i.e. the ordering and direction of memory writes in GRAM)
|
|
const uint8_t madctl[] = {
|
|
[QP_ROTATION_0] = ILI9XXX_MADCTL_BGR,
|
|
[QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MV,
|
|
[QP_ROTATION_180] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MY,
|
|
[QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV | ILI9XXX_MADCTL_MY,
|
|
};
|
|
qp_comms_command_databyte(device, ILI9XXX_SET_MEM_ACS_CTL, madctl[rotation]);
|
|
|
|
return true;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Driver vtable
|
|
|
|
const struct tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable = {
|
|
.base =
|
|
{
|
|
.init = qp_ili9341_init,
|
|
.power = qp_tft_panel_power,
|
|
.clear = qp_tft_panel_clear,
|
|
.flush = qp_tft_panel_flush,
|
|
.pixdata = qp_tft_panel_pixdata,
|
|
.viewport = qp_tft_panel_viewport,
|
|
.palette_convert = qp_tft_panel_palette_convert,
|
|
.append_pixels = qp_tft_panel_append_pixels,
|
|
},
|
|
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
|
|
.num_window_bytes = 2,
|
|
.swap_window_coords = false,
|
|
.opcodes =
|
|
{
|
|
.display_on = ILI9XXX_CMD_DISPLAY_ON,
|
|
.display_off = ILI9XXX_CMD_DISPLAY_OFF,
|
|
.set_column_address = ILI9XXX_SET_COL_ADDR,
|
|
.set_row_address = ILI9XXX_SET_PAGE_ADDR,
|
|
.enable_writes = ILI9XXX_SET_MEM,
|
|
},
|
|
};
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// SPI
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9341_SPI_ENABLE
|
|
|
|
// Factory function for creating a handle to the ILI9341 device
|
|
painter_device_t qp_ili9341_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
|
|
for (uint32_t i = 0; i < ILI9341_NUM_DEVICES; ++i) {
|
|
tft_panel_dc_reset_painter_device_t *driver = &ili9341_drivers[i];
|
|
if (!driver->base.driver_vtable) {
|
|
driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&ili9341_driver_vtable;
|
|
driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
|
|
driver->base.native_bits_per_pixel = 16; // RGB565
|
|
driver->base.panel_width = panel_width;
|
|
driver->base.panel_height = panel_height;
|
|
driver->base.rotation = QP_ROTATION_0;
|
|
driver->base.offset_x = 0;
|
|
driver->base.offset_y = 0;
|
|
|
|
// SPI and other pin configuration
|
|
driver->base.comms_config = &driver->spi_dc_reset_config;
|
|
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
|
|
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
|
|
driver->spi_dc_reset_config.spi_config.lsb_first = false;
|
|
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
|
|
driver->spi_dc_reset_config.dc_pin = dc_pin;
|
|
driver->spi_dc_reset_config.reset_pin = reset_pin;
|
|
return (painter_device_t)driver;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
#endif // QUANTUM_PAINTER_ILI9341_SPI_ENABLE
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|