forked from mirrors/qmk_firmware
1646c0f26c
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
646 lines
24 KiB
C
646 lines
24 KiB
C
/* Copyright 2017 Jason Williams
|
|
* Copyright 2017 Jack Humbert
|
|
* Copyright 2018 Yiancar
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "rgb_matrix.h"
|
|
#include "progmem.h"
|
|
#include "config.h"
|
|
#include "eeprom.h"
|
|
#include <string.h>
|
|
#include <math.h>
|
|
|
|
#include <lib/lib8tion/lib8tion.h>
|
|
|
|
#ifndef RGB_MATRIX_CENTER
|
|
const led_point_t k_rgb_matrix_center = {112, 32};
|
|
#else
|
|
const led_point_t k_rgb_matrix_center = RGB_MATRIX_CENTER;
|
|
#endif
|
|
|
|
__attribute__((weak)) RGB rgb_matrix_hsv_to_rgb(HSV hsv) { return hsv_to_rgb(hsv); }
|
|
|
|
// Generic effect runners
|
|
#include "rgb_matrix_runners/effect_runner_dx_dy_dist.h"
|
|
#include "rgb_matrix_runners/effect_runner_dx_dy.h"
|
|
#include "rgb_matrix_runners/effect_runner_i.h"
|
|
#include "rgb_matrix_runners/effect_runner_sin_cos_i.h"
|
|
#include "rgb_matrix_runners/effect_runner_reactive.h"
|
|
#include "rgb_matrix_runners/effect_runner_reactive_splash.h"
|
|
|
|
// ------------------------------------------
|
|
// -----Begin rgb effect includes macros-----
|
|
#define RGB_MATRIX_EFFECT(name)
|
|
#define RGB_MATRIX_CUSTOM_EFFECT_IMPLS
|
|
|
|
#include "rgb_matrix_animations/rgb_matrix_effects.inc"
|
|
#ifdef RGB_MATRIX_CUSTOM_KB
|
|
# include "rgb_matrix_kb.inc"
|
|
#endif
|
|
#ifdef RGB_MATRIX_CUSTOM_USER
|
|
# include "rgb_matrix_user.inc"
|
|
#endif
|
|
|
|
#undef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
|
|
#undef RGB_MATRIX_EFFECT
|
|
// -----End rgb effect includes macros-------
|
|
// ------------------------------------------
|
|
|
|
#if defined(RGB_DISABLE_AFTER_TIMEOUT) && !defined(RGB_DISABLE_TIMEOUT)
|
|
# define RGB_DISABLE_TIMEOUT (RGB_DISABLE_AFTER_TIMEOUT * 1200UL)
|
|
#endif
|
|
|
|
#ifndef RGB_DISABLE_TIMEOUT
|
|
# define RGB_DISABLE_TIMEOUT 0
|
|
#endif
|
|
|
|
#if RGB_DISABLE_WHEN_USB_SUSPENDED == false
|
|
# undef RGB_DISABLE_WHEN_USB_SUSPENDED
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) || RGB_MATRIX_MAXIMUM_BRIGHTNESS > UINT8_MAX
|
|
# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
|
|
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS UINT8_MAX
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_HUE_STEP)
|
|
# define RGB_MATRIX_HUE_STEP 8
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_SAT_STEP)
|
|
# define RGB_MATRIX_SAT_STEP 16
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_VAL_STEP)
|
|
# define RGB_MATRIX_VAL_STEP 16
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_SPD_STEP)
|
|
# define RGB_MATRIX_SPD_STEP 16
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_STARTUP_MODE)
|
|
# ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
|
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
|
|
# else
|
|
// fallback to solid colors if RGB_MATRIX_CYCLE_LEFT_RIGHT is disabled in userspace
|
|
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
|
|
# endif
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_STARTUP_HUE)
|
|
# define RGB_MATRIX_STARTUP_HUE 0
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_STARTUP_SAT)
|
|
# define RGB_MATRIX_STARTUP_SAT UINT8_MAX
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_STARTUP_VAL)
|
|
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
|
|
#endif
|
|
|
|
#if !defined(RGB_MATRIX_STARTUP_SPD)
|
|
# define RGB_MATRIX_STARTUP_SPD UINT8_MAX / 2
|
|
#endif
|
|
|
|
// globals
|
|
rgb_config_t rgb_matrix_config; // TODO: would like to prefix this with g_ for global consistancy, do this in another pr
|
|
uint32_t g_rgb_timer;
|
|
#ifdef RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
uint8_t g_rgb_frame_buffer[MATRIX_ROWS][MATRIX_COLS] = {{0}};
|
|
#endif // RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
last_hit_t g_last_hit_tracker;
|
|
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
|
|
// internals
|
|
static bool suspend_state = false;
|
|
static uint8_t rgb_last_enable = UINT8_MAX;
|
|
static uint8_t rgb_last_effect = UINT8_MAX;
|
|
static effect_params_t rgb_effect_params = {0, LED_FLAG_ALL, false};
|
|
static rgb_task_states rgb_task_state = SYNCING;
|
|
#if RGB_DISABLE_TIMEOUT > 0
|
|
static uint32_t rgb_anykey_timer;
|
|
#endif // RGB_DISABLE_TIMEOUT > 0
|
|
|
|
// double buffers
|
|
static uint32_t rgb_timer_buffer;
|
|
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
static last_hit_t last_hit_buffer;
|
|
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
|
|
// split rgb matrix
|
|
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
|
|
const uint8_t k_rgb_matrix_split[2] = RGB_MATRIX_SPLIT;
|
|
#endif
|
|
|
|
void eeconfig_read_rgb_matrix(void) { eeprom_read_block(&rgb_matrix_config, EECONFIG_RGB_MATRIX, sizeof(rgb_matrix_config)); }
|
|
|
|
void eeconfig_update_rgb_matrix(void) { eeprom_update_block(&rgb_matrix_config, EECONFIG_RGB_MATRIX, sizeof(rgb_matrix_config)); }
|
|
|
|
void eeconfig_update_rgb_matrix_default(void) {
|
|
dprintf("eeconfig_update_rgb_matrix_default\n");
|
|
rgb_matrix_config.enable = 1;
|
|
rgb_matrix_config.mode = RGB_MATRIX_STARTUP_MODE;
|
|
rgb_matrix_config.hsv = (HSV){RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL};
|
|
rgb_matrix_config.speed = RGB_MATRIX_STARTUP_SPD;
|
|
rgb_matrix_config.flags = LED_FLAG_ALL;
|
|
eeconfig_update_rgb_matrix();
|
|
}
|
|
|
|
void eeconfig_debug_rgb_matrix(void) {
|
|
dprintf("rgb_matrix_config EEPROM\n");
|
|
dprintf("rgb_matrix_config.enable = %d\n", rgb_matrix_config.enable);
|
|
dprintf("rgb_matrix_config.mode = %d\n", rgb_matrix_config.mode);
|
|
dprintf("rgb_matrix_config.hsv.h = %d\n", rgb_matrix_config.hsv.h);
|
|
dprintf("rgb_matrix_config.hsv.s = %d\n", rgb_matrix_config.hsv.s);
|
|
dprintf("rgb_matrix_config.hsv.v = %d\n", rgb_matrix_config.hsv.v);
|
|
dprintf("rgb_matrix_config.speed = %d\n", rgb_matrix_config.speed);
|
|
dprintf("rgb_matrix_config.flags = %d\n", rgb_matrix_config.flags);
|
|
}
|
|
|
|
__attribute__((weak)) uint8_t rgb_matrix_map_row_column_to_led_kb(uint8_t row, uint8_t column, uint8_t *led_i) { return 0; }
|
|
|
|
uint8_t rgb_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *led_i) {
|
|
uint8_t led_count = rgb_matrix_map_row_column_to_led_kb(row, column, led_i);
|
|
uint8_t led_index = g_led_config.matrix_co[row][column];
|
|
if (led_index != NO_LED) {
|
|
led_i[led_count] = led_index;
|
|
led_count++;
|
|
}
|
|
return led_count;
|
|
}
|
|
|
|
void rgb_matrix_update_pwm_buffers(void) { rgb_matrix_driver.flush(); }
|
|
|
|
void rgb_matrix_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
|
|
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
|
|
if (!is_keyboard_left() && index >= k_rgb_matrix_split[0])
|
|
rgb_matrix_driver.set_color(index - k_rgb_matrix_split[0], red, green, blue);
|
|
else if (is_keyboard_left() && index < k_rgb_matrix_split[0])
|
|
#endif
|
|
rgb_matrix_driver.set_color(index, red, green, blue);
|
|
}
|
|
|
|
void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
|
|
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
|
|
for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) rgb_matrix_set_color(i, red, green, blue);
|
|
#else
|
|
rgb_matrix_driver.set_color_all(red, green, blue);
|
|
#endif
|
|
}
|
|
|
|
void process_rgb_matrix(uint8_t row, uint8_t col, bool pressed) {
|
|
#ifndef RGB_MATRIX_SPLIT
|
|
if (!is_keyboard_master()) return;
|
|
#endif
|
|
#if RGB_DISABLE_TIMEOUT > 0
|
|
rgb_anykey_timer = 0;
|
|
#endif // RGB_DISABLE_TIMEOUT > 0
|
|
|
|
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
uint8_t led[LED_HITS_TO_REMEMBER];
|
|
uint8_t led_count = 0;
|
|
|
|
# if defined(RGB_MATRIX_KEYRELEASES)
|
|
if (!pressed)
|
|
# elif defined(RGB_MATRIX_KEYPRESSES)
|
|
if (pressed)
|
|
# endif // defined(RGB_MATRIX_KEYRELEASES)
|
|
{
|
|
led_count = rgb_matrix_map_row_column_to_led(row, col, led);
|
|
}
|
|
|
|
if (last_hit_buffer.count + led_count > LED_HITS_TO_REMEMBER) {
|
|
memcpy(&last_hit_buffer.x[0], &last_hit_buffer.x[led_count], LED_HITS_TO_REMEMBER - led_count);
|
|
memcpy(&last_hit_buffer.y[0], &last_hit_buffer.y[led_count], LED_HITS_TO_REMEMBER - led_count);
|
|
memcpy(&last_hit_buffer.tick[0], &last_hit_buffer.tick[led_count], (LED_HITS_TO_REMEMBER - led_count) * 2); // 16 bit
|
|
memcpy(&last_hit_buffer.index[0], &last_hit_buffer.index[led_count], LED_HITS_TO_REMEMBER - led_count);
|
|
last_hit_buffer.count--;
|
|
}
|
|
|
|
for (uint8_t i = 0; i < led_count; i++) {
|
|
uint8_t index = last_hit_buffer.count;
|
|
last_hit_buffer.x[index] = g_led_config.point[led[i]].x;
|
|
last_hit_buffer.y[index] = g_led_config.point[led[i]].y;
|
|
last_hit_buffer.index[index] = led[i];
|
|
last_hit_buffer.tick[index] = 0;
|
|
last_hit_buffer.count++;
|
|
}
|
|
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
|
|
#if defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_RGB_MATRIX_TYPING_HEATMAP)
|
|
if (rgb_matrix_config.mode == RGB_MATRIX_TYPING_HEATMAP) {
|
|
process_rgb_matrix_typing_heatmap(row, col);
|
|
}
|
|
#endif // defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_RGB_MATRIX_TYPING_HEATMAP)
|
|
}
|
|
|
|
void rgb_matrix_test(void) {
|
|
// Mask out bits 4 and 5
|
|
// Increase the factor to make the test animation slower (and reduce to make it faster)
|
|
uint8_t factor = 10;
|
|
switch ((g_rgb_timer & (0b11 << factor)) >> factor) {
|
|
case 0: {
|
|
rgb_matrix_set_color_all(20, 0, 0);
|
|
break;
|
|
}
|
|
case 1: {
|
|
rgb_matrix_set_color_all(0, 20, 0);
|
|
break;
|
|
}
|
|
case 2: {
|
|
rgb_matrix_set_color_all(0, 0, 20);
|
|
break;
|
|
}
|
|
case 3: {
|
|
rgb_matrix_set_color_all(20, 20, 20);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool rgb_matrix_none(effect_params_t *params) {
|
|
if (!params->init) {
|
|
return false;
|
|
}
|
|
|
|
rgb_matrix_set_color_all(0, 0, 0);
|
|
return false;
|
|
}
|
|
|
|
static void rgb_task_timers(void) {
|
|
#if defined(RGB_MATRIX_KEYREACTIVE_ENABLED) || RGB_DISABLE_TIMEOUT > 0
|
|
uint32_t deltaTime = sync_timer_elapsed32(rgb_timer_buffer);
|
|
#endif // defined(RGB_MATRIX_KEYREACTIVE_ENABLED) || RGB_DISABLE_TIMEOUT > 0
|
|
rgb_timer_buffer = sync_timer_read32();
|
|
|
|
// Update double buffer timers
|
|
#if RGB_DISABLE_TIMEOUT > 0
|
|
if (rgb_anykey_timer < UINT32_MAX) {
|
|
if (UINT32_MAX - deltaTime < rgb_anykey_timer) {
|
|
rgb_anykey_timer = UINT32_MAX;
|
|
} else {
|
|
rgb_anykey_timer += deltaTime;
|
|
}
|
|
}
|
|
#endif // RGB_DISABLE_TIMEOUT > 0
|
|
|
|
// Update double buffer last hit timers
|
|
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
uint8_t count = last_hit_buffer.count;
|
|
for (uint8_t i = 0; i < count; ++i) {
|
|
if (UINT16_MAX - deltaTime < last_hit_buffer.tick[i]) {
|
|
last_hit_buffer.count--;
|
|
continue;
|
|
}
|
|
last_hit_buffer.tick[i] += deltaTime;
|
|
}
|
|
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
}
|
|
|
|
static void rgb_task_sync(void) {
|
|
// next task
|
|
if (sync_timer_elapsed32(g_rgb_timer) >= RGB_MATRIX_LED_FLUSH_LIMIT) rgb_task_state = STARTING;
|
|
}
|
|
|
|
static void rgb_task_start(void) {
|
|
// reset iter
|
|
rgb_effect_params.iter = 0;
|
|
|
|
// update double buffers
|
|
g_rgb_timer = rgb_timer_buffer;
|
|
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
g_last_hit_tracker = last_hit_buffer;
|
|
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
|
|
// next task
|
|
rgb_task_state = RENDERING;
|
|
}
|
|
|
|
static void rgb_task_render(uint8_t effect) {
|
|
bool rendering = false;
|
|
rgb_effect_params.init = (effect != rgb_last_effect) || (rgb_matrix_config.enable != rgb_last_enable);
|
|
if (rgb_effect_params.flags != rgb_matrix_config.flags) {
|
|
rgb_effect_params.flags = rgb_matrix_config.flags;
|
|
rgb_matrix_set_color_all(0, 0, 0);
|
|
}
|
|
|
|
// each effect can opt to do calculations
|
|
// and/or request PWM buffer updates.
|
|
switch (effect) {
|
|
case RGB_MATRIX_NONE:
|
|
rendering = rgb_matrix_none(&rgb_effect_params);
|
|
break;
|
|
|
|
// ---------------------------------------------
|
|
// -----Begin rgb effect switch case macros-----
|
|
#define RGB_MATRIX_EFFECT(name, ...) \
|
|
case RGB_MATRIX_##name: \
|
|
rendering = name(&rgb_effect_params); \
|
|
break;
|
|
#include "rgb_matrix_animations/rgb_matrix_effects.inc"
|
|
#undef RGB_MATRIX_EFFECT
|
|
|
|
#if defined(RGB_MATRIX_CUSTOM_KB) || defined(RGB_MATRIX_CUSTOM_USER)
|
|
# define RGB_MATRIX_EFFECT(name, ...) \
|
|
case RGB_MATRIX_CUSTOM_##name: \
|
|
rendering = name(&rgb_effect_params); \
|
|
break;
|
|
# ifdef RGB_MATRIX_CUSTOM_KB
|
|
# include "rgb_matrix_kb.inc"
|
|
# endif
|
|
# ifdef RGB_MATRIX_CUSTOM_USER
|
|
# include "rgb_matrix_user.inc"
|
|
# endif
|
|
# undef RGB_MATRIX_EFFECT
|
|
#endif
|
|
// -----End rgb effect switch case macros-------
|
|
// ---------------------------------------------
|
|
|
|
// Factory default magic value
|
|
case UINT8_MAX: {
|
|
rgb_matrix_test();
|
|
rgb_task_state = FLUSHING;
|
|
}
|
|
return;
|
|
}
|
|
|
|
rgb_effect_params.iter++;
|
|
|
|
// next task
|
|
if (!rendering) {
|
|
rgb_task_state = FLUSHING;
|
|
if (!rgb_effect_params.init && effect == RGB_MATRIX_NONE) {
|
|
// We only need to flush once if we are RGB_MATRIX_NONE
|
|
rgb_task_state = SYNCING;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void rgb_task_flush(uint8_t effect) {
|
|
// update last trackers after the first full render so we can init over several frames
|
|
rgb_last_effect = effect;
|
|
rgb_last_enable = rgb_matrix_config.enable;
|
|
|
|
// update pwm buffers
|
|
rgb_matrix_update_pwm_buffers();
|
|
|
|
// next task
|
|
rgb_task_state = SYNCING;
|
|
}
|
|
|
|
void rgb_matrix_task(void) {
|
|
rgb_task_timers();
|
|
|
|
// Ideally we would also stop sending zeros to the LED driver PWM buffers
|
|
// while suspended and just do a software shutdown. This is a cheap hack for now.
|
|
bool suspend_backlight = suspend_state ||
|
|
#if RGB_DISABLE_TIMEOUT > 0
|
|
(rgb_anykey_timer > (uint32_t)RGB_DISABLE_TIMEOUT) ||
|
|
#endif // RGB_DISABLE_TIMEOUT > 0
|
|
false;
|
|
|
|
uint8_t effect = suspend_backlight || !rgb_matrix_config.enable ? 0 : rgb_matrix_config.mode;
|
|
|
|
switch (rgb_task_state) {
|
|
case STARTING:
|
|
rgb_task_start();
|
|
break;
|
|
case RENDERING:
|
|
rgb_task_render(effect);
|
|
if (effect) {
|
|
rgb_matrix_indicators();
|
|
rgb_matrix_indicators_advanced(&rgb_effect_params);
|
|
}
|
|
break;
|
|
case FLUSHING:
|
|
rgb_task_flush(effect);
|
|
break;
|
|
case SYNCING:
|
|
rgb_task_sync();
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rgb_matrix_indicators(void) {
|
|
rgb_matrix_indicators_kb();
|
|
rgb_matrix_indicators_user();
|
|
}
|
|
|
|
__attribute__((weak)) void rgb_matrix_indicators_kb(void) {}
|
|
|
|
__attribute__((weak)) void rgb_matrix_indicators_user(void) {}
|
|
|
|
void rgb_matrix_indicators_advanced(effect_params_t *params) {
|
|
/* special handling is needed for "params->iter", since it's already been incremented.
|
|
* Could move the invocations to rgb_task_render, but then it's missing a few checks
|
|
* and not sure which would be better. Otherwise, this should be called from
|
|
* rgb_task_render, right before the iter++ line.
|
|
*/
|
|
#if defined(RGB_MATRIX_LED_PROCESS_LIMIT) && RGB_MATRIX_LED_PROCESS_LIMIT > 0 && RGB_MATRIX_LED_PROCESS_LIMIT < DRIVER_LED_TOTAL
|
|
uint8_t min = RGB_MATRIX_LED_PROCESS_LIMIT * (params->iter - 1);
|
|
uint8_t max = min + RGB_MATRIX_LED_PROCESS_LIMIT;
|
|
if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL;
|
|
#else
|
|
uint8_t min = 0;
|
|
uint8_t max = DRIVER_LED_TOTAL;
|
|
#endif
|
|
rgb_matrix_indicators_advanced_kb(min, max);
|
|
rgb_matrix_indicators_advanced_user(min, max);
|
|
}
|
|
|
|
__attribute__((weak)) void rgb_matrix_indicators_advanced_kb(uint8_t led_min, uint8_t led_max) {}
|
|
|
|
__attribute__((weak)) void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {}
|
|
|
|
void rgb_matrix_init(void) {
|
|
rgb_matrix_driver.init();
|
|
|
|
#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
g_last_hit_tracker.count = 0;
|
|
for (uint8_t i = 0; i < LED_HITS_TO_REMEMBER; ++i) {
|
|
g_last_hit_tracker.tick[i] = UINT16_MAX;
|
|
}
|
|
|
|
last_hit_buffer.count = 0;
|
|
for (uint8_t i = 0; i < LED_HITS_TO_REMEMBER; ++i) {
|
|
last_hit_buffer.tick[i] = UINT16_MAX;
|
|
}
|
|
#endif // RGB_MATRIX_KEYREACTIVE_ENABLED
|
|
|
|
if (!eeconfig_is_enabled()) {
|
|
dprintf("rgb_matrix_init_drivers eeconfig is not enabled.\n");
|
|
eeconfig_init();
|
|
eeconfig_update_rgb_matrix_default();
|
|
}
|
|
|
|
eeconfig_read_rgb_matrix();
|
|
if (!rgb_matrix_config.mode) {
|
|
dprintf("rgb_matrix_init_drivers rgb_matrix_config.mode = 0. Write default values to EEPROM.\n");
|
|
eeconfig_update_rgb_matrix_default();
|
|
}
|
|
eeconfig_debug_rgb_matrix(); // display current eeprom values
|
|
}
|
|
|
|
void rgb_matrix_set_suspend_state(bool state) {
|
|
#ifdef RGB_DISABLE_WHEN_USB_SUSPENDED
|
|
if (state) {
|
|
rgb_matrix_set_color_all(0, 0, 0); // turn off all LEDs when suspending
|
|
}
|
|
suspend_state = state;
|
|
#endif
|
|
}
|
|
|
|
bool rgb_matrix_get_suspend_state(void) { return suspend_state; }
|
|
|
|
void rgb_matrix_toggle_eeprom_helper(bool write_to_eeprom) {
|
|
rgb_matrix_config.enable ^= 1;
|
|
rgb_task_state = STARTING;
|
|
if (write_to_eeprom) {
|
|
eeconfig_update_rgb_matrix();
|
|
}
|
|
dprintf("rgb matrix toggle [%s]: rgb_matrix_config.enable = %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.enable);
|
|
}
|
|
void rgb_matrix_toggle_noeeprom(void) { rgb_matrix_toggle_eeprom_helper(false); }
|
|
void rgb_matrix_toggle(void) { rgb_matrix_toggle_eeprom_helper(true); }
|
|
|
|
void rgb_matrix_enable(void) {
|
|
rgb_matrix_enable_noeeprom();
|
|
eeconfig_update_rgb_matrix();
|
|
}
|
|
|
|
void rgb_matrix_enable_noeeprom(void) {
|
|
if (!rgb_matrix_config.enable) rgb_task_state = STARTING;
|
|
rgb_matrix_config.enable = 1;
|
|
}
|
|
|
|
void rgb_matrix_disable(void) {
|
|
rgb_matrix_disable_noeeprom();
|
|
eeconfig_update_rgb_matrix();
|
|
}
|
|
|
|
void rgb_matrix_disable_noeeprom(void) {
|
|
if (rgb_matrix_config.enable) rgb_task_state = STARTING;
|
|
rgb_matrix_config.enable = 0;
|
|
}
|
|
|
|
uint8_t rgb_matrix_is_enabled(void) { return rgb_matrix_config.enable; }
|
|
|
|
void rgb_matrix_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) {
|
|
if (!rgb_matrix_config.enable) {
|
|
return;
|
|
}
|
|
if (mode < 1) {
|
|
rgb_matrix_config.mode = 1;
|
|
} else if (mode >= RGB_MATRIX_EFFECT_MAX) {
|
|
rgb_matrix_config.mode = RGB_MATRIX_EFFECT_MAX - 1;
|
|
} else {
|
|
rgb_matrix_config.mode = mode;
|
|
}
|
|
rgb_task_state = STARTING;
|
|
if (write_to_eeprom) {
|
|
eeconfig_update_rgb_matrix();
|
|
}
|
|
dprintf("rgb matrix mode [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.mode);
|
|
}
|
|
void rgb_matrix_mode_noeeprom(uint8_t mode) { rgb_matrix_mode_eeprom_helper(mode, false); }
|
|
void rgb_matrix_mode(uint8_t mode) { rgb_matrix_mode_eeprom_helper(mode, true); }
|
|
|
|
uint8_t rgb_matrix_get_mode(void) { return rgb_matrix_config.mode; }
|
|
|
|
void rgb_matrix_step_helper(bool write_to_eeprom) {
|
|
uint8_t mode = rgb_matrix_config.mode + 1;
|
|
rgb_matrix_mode_eeprom_helper((mode < RGB_MATRIX_EFFECT_MAX) ? mode : 1, write_to_eeprom);
|
|
}
|
|
void rgb_matrix_step_noeeprom(void) { rgb_matrix_step_helper(false); }
|
|
void rgb_matrix_step(void) { rgb_matrix_step_helper(true); }
|
|
|
|
void rgb_matrix_step_reverse_helper(bool write_to_eeprom) {
|
|
uint8_t mode = rgb_matrix_config.mode - 1;
|
|
rgb_matrix_mode_eeprom_helper((mode < 1) ? RGB_MATRIX_EFFECT_MAX - 1 : mode, write_to_eeprom);
|
|
}
|
|
void rgb_matrix_step_reverse_noeeprom(void) { rgb_matrix_step_reverse_helper(false); }
|
|
void rgb_matrix_step_reverse(void) { rgb_matrix_step_reverse_helper(true); }
|
|
|
|
void rgb_matrix_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom) {
|
|
if (!rgb_matrix_config.enable) {
|
|
return;
|
|
}
|
|
rgb_matrix_config.hsv.h = hue;
|
|
rgb_matrix_config.hsv.s = sat;
|
|
rgb_matrix_config.hsv.v = (val > RGB_MATRIX_MAXIMUM_BRIGHTNESS) ? RGB_MATRIX_MAXIMUM_BRIGHTNESS : val;
|
|
if (write_to_eeprom) {
|
|
eeconfig_update_rgb_matrix();
|
|
}
|
|
dprintf("rgb matrix set hsv [%s]: %u,%u,%u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v);
|
|
}
|
|
void rgb_matrix_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { rgb_matrix_sethsv_eeprom_helper(hue, sat, val, false); }
|
|
void rgb_matrix_sethsv(uint16_t hue, uint8_t sat, uint8_t val) { rgb_matrix_sethsv_eeprom_helper(hue, sat, val, true); }
|
|
|
|
HSV rgb_matrix_get_hsv(void) { return rgb_matrix_config.hsv; }
|
|
uint8_t rgb_matrix_get_hue(void) { return rgb_matrix_config.hsv.h; }
|
|
uint8_t rgb_matrix_get_sat(void) { return rgb_matrix_config.hsv.s; }
|
|
uint8_t rgb_matrix_get_val(void) { return rgb_matrix_config.hsv.v; }
|
|
|
|
void rgb_matrix_increase_hue_helper(bool write_to_eeprom) { rgb_matrix_sethsv_eeprom_helper(rgb_matrix_config.hsv.h + RGB_MATRIX_HUE_STEP, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v, write_to_eeprom); }
|
|
void rgb_matrix_increase_hue_noeeprom(void) { rgb_matrix_increase_hue_helper(false); }
|
|
void rgb_matrix_increase_hue(void) { rgb_matrix_increase_hue_helper(true); }
|
|
|
|
void rgb_matrix_decrease_hue_helper(bool write_to_eeprom) { rgb_matrix_sethsv_eeprom_helper(rgb_matrix_config.hsv.h - RGB_MATRIX_HUE_STEP, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v, write_to_eeprom); }
|
|
void rgb_matrix_decrease_hue_noeeprom(void) { rgb_matrix_decrease_hue_helper(false); }
|
|
void rgb_matrix_decrease_hue(void) { rgb_matrix_decrease_hue_helper(true); }
|
|
|
|
void rgb_matrix_increase_sat_helper(bool write_to_eeprom) { rgb_matrix_sethsv_eeprom_helper(rgb_matrix_config.hsv.h, qadd8(rgb_matrix_config.hsv.s, RGB_MATRIX_SAT_STEP), rgb_matrix_config.hsv.v, write_to_eeprom); }
|
|
void rgb_matrix_increase_sat_noeeprom(void) { rgb_matrix_increase_sat_helper(false); }
|
|
void rgb_matrix_increase_sat(void) { rgb_matrix_increase_sat_helper(true); }
|
|
|
|
void rgb_matrix_decrease_sat_helper(bool write_to_eeprom) { rgb_matrix_sethsv_eeprom_helper(rgb_matrix_config.hsv.h, qsub8(rgb_matrix_config.hsv.s, RGB_MATRIX_SAT_STEP), rgb_matrix_config.hsv.v, write_to_eeprom); }
|
|
void rgb_matrix_decrease_sat_noeeprom(void) { rgb_matrix_decrease_sat_helper(false); }
|
|
void rgb_matrix_decrease_sat(void) { rgb_matrix_decrease_sat_helper(true); }
|
|
|
|
void rgb_matrix_increase_val_helper(bool write_to_eeprom) { rgb_matrix_sethsv_eeprom_helper(rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, qadd8(rgb_matrix_config.hsv.v, RGB_MATRIX_VAL_STEP), write_to_eeprom); }
|
|
void rgb_matrix_increase_val_noeeprom(void) { rgb_matrix_increase_val_helper(false); }
|
|
void rgb_matrix_increase_val(void) { rgb_matrix_increase_val_helper(true); }
|
|
|
|
void rgb_matrix_decrease_val_helper(bool write_to_eeprom) { rgb_matrix_sethsv_eeprom_helper(rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, qsub8(rgb_matrix_config.hsv.v, RGB_MATRIX_VAL_STEP), write_to_eeprom); }
|
|
void rgb_matrix_decrease_val_noeeprom(void) { rgb_matrix_decrease_val_helper(false); }
|
|
void rgb_matrix_decrease_val(void) { rgb_matrix_decrease_val_helper(true); }
|
|
|
|
void rgb_matrix_set_speed_eeprom_helper(uint8_t speed, bool write_to_eeprom) {
|
|
rgb_matrix_config.speed = speed;
|
|
if (write_to_eeprom) {
|
|
eeconfig_update_rgb_matrix();
|
|
}
|
|
dprintf("rgb matrix set speed [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.speed);
|
|
}
|
|
void rgb_matrix_set_speed_noeeprom(uint8_t speed) { rgb_matrix_set_speed_eeprom_helper(speed, false); }
|
|
void rgb_matrix_set_speed(uint8_t speed) { rgb_matrix_set_speed_eeprom_helper(speed, true); }
|
|
|
|
uint8_t rgb_matrix_get_speed(void) { return rgb_matrix_config.speed; }
|
|
|
|
void rgb_matrix_increase_speed_helper(bool write_to_eeprom) { rgb_matrix_set_speed_eeprom_helper(qadd8(rgb_matrix_config.speed, RGB_MATRIX_SPD_STEP), write_to_eeprom); }
|
|
void rgb_matrix_increase_speed_noeeprom(void) { rgb_matrix_increase_speed_helper(false); }
|
|
void rgb_matrix_increase_speed(void) { rgb_matrix_increase_speed_helper(true); }
|
|
|
|
void rgb_matrix_decrease_speed_helper(bool write_to_eeprom) { rgb_matrix_set_speed_eeprom_helper(qsub8(rgb_matrix_config.speed, RGB_MATRIX_SPD_STEP), write_to_eeprom); }
|
|
void rgb_matrix_decrease_speed_noeeprom(void) { rgb_matrix_decrease_speed_helper(false); }
|
|
void rgb_matrix_decrease_speed(void) { rgb_matrix_decrease_speed_helper(true); }
|
|
|
|
led_flags_t rgb_matrix_get_flags(void) { return rgb_matrix_config.flags; }
|
|
|
|
void rgb_matrix_set_flags(led_flags_t flags) { rgb_matrix_config.flags = flags; }
|