darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/yandrstudio/nz64
History
Ryan 36ce81df59
Move WS2812_DRIVER to data driven (#20248)
2023-03-26 18:22:12 +11:00
..
keymaps Open Use standard magic keycodes in yandrstudio keymaps (#19919) 2023-02-23 14:46:15 +00:00
board.h Fixup ChibiOS header inclusion search ordering. (#19623) 2023-01-19 01:05:29 +00:00
config.h Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
halconf.h
info.json Move WS2812_DRIVER to data driven (#20248) 2023-03-26 18:22:12 +11:00
mcuconf.h
nz64.c Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
nz64.h Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Move WS2812_DRIVER to data driven (#20248) 2023-03-26 18:22:12 +11:00

readme.md

nz64

A 64 keys keyboard with rgb (keys). This keyboard use 16mhz HSE and STM32F401 as MCU.

Make example for this keyboard (after setting up your build environment):

make yandrstudio/nz64:default

See build environment setup then the make instructions for more information.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
  • Physical reset pins: Short circuit the bt0 and vcc pins on the back of the PCB and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.