qmk_firmware/keyboards/keychron/v10/config.h
2024-02-14 00:54:14 +00:00

49 lines
1.8 KiB
C

/* Copyright 2023 @ Keychron(https://www.keychron.com)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* key matrix pins */
#define MATRIX_ROW_PINS { B5, B4, B3, A15, A14, A13 }
#define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A5, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN }
/* Pin connected to DS of 74HC595 */
#define DATA_PIN_74HC595 A7
/* Pin connected to SH_CP of 74HC595 */
#define CLOCK_PIN_74HC595 B1
/* Pin connected to ST_CP of 74HC595 */
#define LATCH_PIN_74HC595 B0
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* RGB Matrix Driver Configuration */
#define SNLED27351_I2C_ADDRESS_1 SNLED27351_I2C_ADDRESS_VDDIO
#define SNLED27351_I2C_ADDRESS_2 SNLED27351_I2C_ADDRESS_GND
/* Increase I2C speed to 1000 KHz */
#define I2C1_TIMINGR_PRESC 0U
#define I2C1_TIMINGR_SCLDEL 3U
#define I2C1_TIMINGR_SDADEL 0U
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }
/* EEPROM Driver Configuration */
#define WEAR_LEVELING_LOGICAL_SIZE 2048
#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)