darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/bpiphany/frosty_flake
History
tofurky 6cc4e32e61
[Keyboard] Fix frosty_flake LED pin assignment (#16000) 
4c080be seemed to swap the LED pins for the 20130602 and 20140521
variants. 20140521 is fine now, 20130602 untested but per the
schematics at https://deskthority.net/wiki/Costar_replacement_controllers
it seems correct.
2022-01-24 15:57:50 +00:00
..
20130602 [Keyboard] Fix frosty_flake LED pin assignment (#16000) 2022-01-24 15:57:50 +00:00
20140521 [Keyboard] Fix frosty_flake LED pin assignment (#16000) 2022-01-24 15:57:50 +00:00
keymaps [Keymap] Adding Frosty Flake VIA keymap (#13211) 2022-01-07 05:27:42 -08:00
config.h [Keymap] Adding Frosty Flake VIA keymap (#13211) 2022-01-07 05:27:42 -08:00
frosty_flake.h Error log cleanup (#13349) 2021-06-26 08:38:14 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] Bathroom Epiphanies Frosty Flake rev 20130602 (#15365) 2022-01-08 13:22:14 -08:00
rules.mk [Keyboard] Bathroom Epiphanies Frosty Flake rev 20130602 (#15365) 2022-01-08 13:22:14 -08:00

readme.md

Frosty Flake Controller

This is the firmware for the Frosty Flake controller by Bathroom Epiphanies, a replacement controller for the Cooler Master Quick Fire Rapid.

The code was adapted from the BathroomEpiphanies TMK Firmware, but has been cleaned up to match the schematic and gone through some minor refactoring for QMK.

Revision support

There are two revisions of this controller. 20140521 is built by default. If you need to build for 20130602, it can be built with make bpiphany/frosty_flake/20130602

104 and 87 layout support

Support for both 104 key and 87 key layouts is provided. See the keymaps default (104) and tkl (87) for example layouts.

Keyboard Maintainer: QMK Community
Hardware Supported: Frosty Flake
Hardware Availability: 1upkeyboards

Make example for this keyboard (after setting up your build environment):

104 key default layout:

make bpiphany/frosty_flake:default

To directly flash the frosty_flake after compiling use:

make bpiphany/frosty_flake:default:dfu

87 key tkl layout:

make bpiphany/frosty_flake:tkl:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.