qmk_firmware/keyboards/4pplet/perk60_iso/rev_a
2023-03-05 22:53:52 +00:00
..
config.h Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
halconf.h
info.json Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
mcuconf.h Migrate more F4x1 board files (#18046) 2022-08-15 00:25:40 +01:00
readme.md
rev_a.c Fix Per Key LED Indicator Callbacks (#18450) 2022-10-04 15:24:22 -07:00
rev_a.h
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

Perk60 ISO Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.