27 lines
No EOL
1.2 KiB
Markdown
27 lines
No EOL
1.2 KiB
Markdown
# qwertyqop hotswap 60% PCB
|
|
|
|
|
|
|
|
A generic hotswap 60% PCB with cutouts akin to h60 and 2 positions for JST port.
|
|
|
|
* Keyboard Maintainer: [Zeix](https://github.com/itsme-zeix)
|
|
* Hardware Supported: Qwertyqop QQ60 Hotswap PCB Rev1
|
|
* Hardware Availability: https://qwertyqop.com/products/60-pcb-1
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make zeix/qwertyqop60hs:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make zeix/qwertyqop60hs:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Press the 'USB_BOOT' button and plug in keyboard or briefly short the `RESET` and `GND` pads on the SWD header twice
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |