974 lines
27 KiB
C
974 lines
27 KiB
C
/*
|
|
* Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
* This file is based on:
|
|
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
|
|
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
|
|
*/
|
|
|
|
/*
|
|
LUFA Library
|
|
Copyright (C) Dean Camera, 2012.
|
|
|
|
dean [at] fourwalledcubicle [dot] com
|
|
www.lufa-lib.org
|
|
*/
|
|
|
|
/*
|
|
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
|
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
|
|
|
|
Permission to use, copy, modify, distribute, and sell this
|
|
software and its documentation for any purpose is hereby granted
|
|
without fee, provided that the above copyright notice appear in
|
|
all copies and that both that the copyright notice and this
|
|
permission notice and warranty disclaimer appear in supporting
|
|
documentation, and that the name of the author not be used in
|
|
advertising or publicity pertaining to distribution of the
|
|
software without specific, written prior permission.
|
|
|
|
The author disclaim all warranties with regard to this
|
|
software, including all implied warranties of merchantability
|
|
and fitness. In no event shall the author be liable for any
|
|
special, indirect or consequential damages or any damages
|
|
whatsoever resulting from loss of use, data or profits, whether
|
|
in an action of contract, negligence or other tortious action,
|
|
arising out of or in connection with the use or performance of
|
|
this software.
|
|
*/
|
|
|
|
#include "report.h"
|
|
#include "host.h"
|
|
#include "host_driver.h"
|
|
#include "keyboard.h"
|
|
#include "action.h"
|
|
#include "led.h"
|
|
#include "sendchar.h"
|
|
#include "debug.h"
|
|
#ifdef SLEEP_LED_ENABLE
|
|
#include "sleep_led.h"
|
|
#endif
|
|
#include "suspend.h"
|
|
|
|
#include "descriptor.h"
|
|
#include "lufa.h"
|
|
|
|
#ifdef AUDIO_ENABLE
|
|
#include <audio.h>
|
|
#endif
|
|
|
|
#ifdef BLUETOOTH_ENABLE
|
|
#include "bluetooth.h"
|
|
#endif
|
|
|
|
uint8_t keyboard_idle = 0;
|
|
/* 0: Boot Protocol, 1: Report Protocol(default) */
|
|
uint8_t keyboard_protocol = 1;
|
|
static uint8_t keyboard_led_stats = 0;
|
|
|
|
static report_keyboard_t keyboard_report_sent;
|
|
|
|
#ifdef MIDI_ENABLE
|
|
void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
|
|
void usb_get_midi(MidiDevice * device);
|
|
void midi_usb_init(MidiDevice * device);
|
|
#endif
|
|
|
|
/* Host driver */
|
|
static uint8_t keyboard_leds(void);
|
|
static void send_keyboard(report_keyboard_t *report);
|
|
static void send_mouse(report_mouse_t *report);
|
|
static void send_system(uint16_t data);
|
|
static void send_consumer(uint16_t data);
|
|
host_driver_t lufa_driver = {
|
|
keyboard_leds,
|
|
send_keyboard,
|
|
send_mouse,
|
|
send_system,
|
|
send_consumer,
|
|
#ifdef MIDI_ENABLE
|
|
usb_send_func,
|
|
usb_get_midi,
|
|
midi_usb_init
|
|
#endif
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* MIDI
|
|
******************************************************************************/
|
|
|
|
#ifdef MIDI_ENABLE
|
|
USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
|
|
{
|
|
.Config =
|
|
{
|
|
.StreamingInterfaceNumber = AS_INTERFACE,
|
|
.DataINEndpoint =
|
|
{
|
|
.Address = MIDI_STREAM_IN_EPADDR,
|
|
.Size = MIDI_STREAM_EPSIZE,
|
|
.Banks = 1,
|
|
},
|
|
.DataOUTEndpoint =
|
|
{
|
|
.Address = MIDI_STREAM_OUT_EPADDR,
|
|
.Size = MIDI_STREAM_EPSIZE,
|
|
.Banks = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
#define SYSEX_START_OR_CONT 0x40
|
|
#define SYSEX_ENDS_IN_1 0x50
|
|
#define SYSEX_ENDS_IN_2 0x60
|
|
#define SYSEX_ENDS_IN_3 0x70
|
|
|
|
#define SYS_COMMON_1 0x50
|
|
#define SYS_COMMON_2 0x20
|
|
#define SYS_COMMON_3 0x30
|
|
#endif
|
|
|
|
|
|
/*******************************************************************************
|
|
* Console
|
|
******************************************************************************/
|
|
#ifdef CONSOLE_ENABLE
|
|
static void Console_Task(void)
|
|
{
|
|
/* Device must be connected and configured for the task to run */
|
|
if (USB_DeviceState != DEVICE_STATE_Configured)
|
|
return;
|
|
|
|
uint8_t ep = Endpoint_GetCurrentEndpoint();
|
|
|
|
#if 0
|
|
// TODO: impl receivechar()/recvchar()
|
|
Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
|
|
|
|
/* Check to see if a packet has been sent from the host */
|
|
if (Endpoint_IsOUTReceived())
|
|
{
|
|
/* Check to see if the packet contains data */
|
|
if (Endpoint_IsReadWriteAllowed())
|
|
{
|
|
/* Create a temporary buffer to hold the read in report from the host */
|
|
uint8_t ConsoleData[CONSOLE_EPSIZE];
|
|
|
|
/* Read Console Report Data */
|
|
Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
|
|
|
|
/* Process Console Report Data */
|
|
//ProcessConsoleHIDReport(ConsoleData);
|
|
}
|
|
|
|
/* Finalize the stream transfer to send the last packet */
|
|
Endpoint_ClearOUT();
|
|
}
|
|
#endif
|
|
|
|
/* IN packet */
|
|
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
|
|
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
|
|
Endpoint_SelectEndpoint(ep);
|
|
return;
|
|
}
|
|
|
|
// fill empty bank
|
|
while (Endpoint_IsReadWriteAllowed())
|
|
Endpoint_Write_8(0);
|
|
|
|
// flash senchar packet
|
|
if (Endpoint_IsINReady()) {
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
Endpoint_SelectEndpoint(ep);
|
|
}
|
|
#endif
|
|
|
|
|
|
/*******************************************************************************
|
|
* USB Events
|
|
******************************************************************************/
|
|
/*
|
|
* Event Order of Plug in:
|
|
* 0) EVENT_USB_Device_Connect
|
|
* 1) EVENT_USB_Device_Suspend
|
|
* 2) EVENT_USB_Device_Reset
|
|
* 3) EVENT_USB_Device_Wake
|
|
*/
|
|
void EVENT_USB_Device_Connect(void)
|
|
{
|
|
print("[C]");
|
|
/* For battery powered device */
|
|
if (!USB_IsInitialized) {
|
|
USB_Disable();
|
|
USB_Init();
|
|
USB_Device_EnableSOFEvents();
|
|
}
|
|
}
|
|
|
|
void EVENT_USB_Device_Disconnect(void)
|
|
{
|
|
print("[D]");
|
|
/* For battery powered device */
|
|
USB_IsInitialized = false;
|
|
/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
|
|
if (USB_IsInitialized) {
|
|
USB_Disable(); // Disable all interrupts
|
|
USB_Controller_Enable();
|
|
USB_INT_Enable(USB_INT_VBUSTI);
|
|
}
|
|
*/
|
|
}
|
|
|
|
void EVENT_USB_Device_Reset(void)
|
|
{
|
|
print("[R]");
|
|
}
|
|
|
|
void EVENT_USB_Device_Suspend()
|
|
{
|
|
print("[S]");
|
|
#ifdef SLEEP_LED_ENABLE
|
|
sleep_led_enable();
|
|
#endif
|
|
}
|
|
|
|
void EVENT_USB_Device_WakeUp()
|
|
{
|
|
print("[W]");
|
|
suspend_wakeup_init();
|
|
|
|
#ifdef SLEEP_LED_ENABLE
|
|
sleep_led_disable();
|
|
// NOTE: converters may not accept this
|
|
led_set(host_keyboard_leds());
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONSOLE_ENABLE
|
|
static bool console_flush = false;
|
|
#define CONSOLE_FLUSH_SET(b) do { \
|
|
uint8_t sreg = SREG; cli(); console_flush = b; SREG = sreg; \
|
|
} while (0)
|
|
|
|
// called every 1ms
|
|
void EVENT_USB_Device_StartOfFrame(void)
|
|
{
|
|
static uint8_t count;
|
|
if (++count % 50) return;
|
|
count = 0;
|
|
|
|
if (!console_flush) return;
|
|
Console_Task();
|
|
console_flush = false;
|
|
}
|
|
#endif
|
|
|
|
/** Event handler for the USB_ConfigurationChanged event.
|
|
* This is fired when the host sets the current configuration of the USB device after enumeration.
|
|
*
|
|
* ATMega32u2 supports dual bank(ping-pong mode) only on endpoint 3 and 4,
|
|
* it is safe to use singl bank for all endpoints.
|
|
*/
|
|
void EVENT_USB_Device_ConfigurationChanged(void)
|
|
{
|
|
bool ConfigSuccess = true;
|
|
|
|
/* Setup Keyboard HID Report Endpoints */
|
|
ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
|
KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
|
|
#ifdef MOUSE_ENABLE
|
|
/* Setup Mouse HID Report Endpoint */
|
|
ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
|
MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
#endif
|
|
|
|
#ifdef EXTRAKEY_ENABLE
|
|
/* Setup Extra HID Report Endpoint */
|
|
ConfigSuccess &= ENDPOINT_CONFIG(EXTRAKEY_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
|
EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
#endif
|
|
|
|
#ifdef CONSOLE_ENABLE
|
|
/* Setup Console HID Report Endpoints */
|
|
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
|
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
#if 0
|
|
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
|
|
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef NKRO_ENABLE
|
|
/* Setup NKRO HID Report Endpoints */
|
|
ConfigSuccess &= ENDPOINT_CONFIG(NKRO_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
|
|
NKRO_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
#endif
|
|
|
|
#ifdef MIDI_ENABLE
|
|
ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
Appendix G: HID Request Support Requirements
|
|
|
|
The following table enumerates the requests that need to be supported by various types of HID class devices.
|
|
|
|
Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol
|
|
------------------------------------------------------------------------------------------
|
|
Boot Mouse Required Optional Optional Optional Required Required
|
|
Non-Boot Mouse Required Optional Optional Optional Optional Optional
|
|
Boot Keyboard Required Optional Required Required Required Required
|
|
Non-Boot Keybrd Required Optional Required Required Optional Optional
|
|
Other Device Required Optional Optional Optional Optional Optional
|
|
*/
|
|
/** Event handler for the USB_ControlRequest event.
|
|
* This is fired before passing along unhandled control requests to the library for processing internally.
|
|
*/
|
|
void EVENT_USB_Device_ControlRequest(void)
|
|
{
|
|
uint8_t* ReportData = NULL;
|
|
uint8_t ReportSize = 0;
|
|
|
|
/* Handle HID Class specific requests */
|
|
switch (USB_ControlRequest.bRequest)
|
|
{
|
|
case HID_REQ_GetReport:
|
|
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
|
|
{
|
|
Endpoint_ClearSETUP();
|
|
|
|
// Interface
|
|
switch (USB_ControlRequest.wIndex) {
|
|
case KEYBOARD_INTERFACE:
|
|
// TODO: test/check
|
|
ReportData = (uint8_t*)&keyboard_report_sent;
|
|
ReportSize = sizeof(keyboard_report_sent);
|
|
break;
|
|
}
|
|
|
|
/* Write the report data to the control endpoint */
|
|
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
|
|
Endpoint_ClearOUT();
|
|
}
|
|
|
|
break;
|
|
case HID_REQ_SetReport:
|
|
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
|
|
{
|
|
|
|
// Interface
|
|
switch (USB_ControlRequest.wIndex) {
|
|
case KEYBOARD_INTERFACE:
|
|
#ifdef NKRO_ENABLE
|
|
case NKRO_INTERFACE:
|
|
#endif
|
|
Endpoint_ClearSETUP();
|
|
|
|
while (!(Endpoint_IsOUTReceived())) {
|
|
if (USB_DeviceState == DEVICE_STATE_Unattached)
|
|
return;
|
|
}
|
|
keyboard_led_stats = Endpoint_Read_8();
|
|
|
|
Endpoint_ClearOUT();
|
|
Endpoint_ClearStatusStage();
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case HID_REQ_GetProtocol:
|
|
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
|
|
{
|
|
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
|
|
Endpoint_ClearSETUP();
|
|
while (!(Endpoint_IsINReady()));
|
|
Endpoint_Write_8(keyboard_protocol);
|
|
Endpoint_ClearIN();
|
|
Endpoint_ClearStatusStage();
|
|
}
|
|
}
|
|
|
|
break;
|
|
case HID_REQ_SetProtocol:
|
|
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
|
|
{
|
|
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
|
|
Endpoint_ClearSETUP();
|
|
Endpoint_ClearStatusStage();
|
|
|
|
keyboard_protocol = (USB_ControlRequest.wValue & 0xFF);
|
|
clear_keyboard();
|
|
}
|
|
}
|
|
|
|
break;
|
|
case HID_REQ_SetIdle:
|
|
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
|
|
{
|
|
Endpoint_ClearSETUP();
|
|
Endpoint_ClearStatusStage();
|
|
|
|
keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
|
|
}
|
|
|
|
break;
|
|
case HID_REQ_GetIdle:
|
|
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
|
|
{
|
|
Endpoint_ClearSETUP();
|
|
while (!(Endpoint_IsINReady()));
|
|
Endpoint_Write_8(keyboard_idle);
|
|
Endpoint_ClearIN();
|
|
Endpoint_ClearStatusStage();
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* Host driver
|
|
******************************************************************************/
|
|
static uint8_t keyboard_leds(void)
|
|
{
|
|
return keyboard_led_stats;
|
|
}
|
|
|
|
static void send_keyboard(report_keyboard_t *report)
|
|
{
|
|
|
|
#ifdef BLUETOOTH_ENABLE
|
|
bluefruit_serial_send(0xFD);
|
|
for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
|
|
bluefruit_serial_send(report->raw[i]);
|
|
}
|
|
#endif
|
|
|
|
uint8_t timeout = 255;
|
|
|
|
if (USB_DeviceState != DEVICE_STATE_Configured)
|
|
return;
|
|
|
|
/* Select the Keyboard Report Endpoint */
|
|
#ifdef NKRO_ENABLE
|
|
if (keyboard_protocol && keyboard_nkro) {
|
|
/* Report protocol - NKRO */
|
|
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
|
|
|
|
/* Check if write ready for a polling interval around 1ms */
|
|
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4);
|
|
if (!Endpoint_IsReadWriteAllowed()) return;
|
|
|
|
/* Write Keyboard Report Data */
|
|
Endpoint_Write_Stream_LE(report, NKRO_EPSIZE, NULL);
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
/* Boot protocol */
|
|
Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
|
|
|
|
/* Check if write ready for a polling interval around 10ms */
|
|
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
|
|
if (!Endpoint_IsReadWriteAllowed()) return;
|
|
|
|
/* Write Keyboard Report Data */
|
|
Endpoint_Write_Stream_LE(report, KEYBOARD_EPSIZE, NULL);
|
|
}
|
|
|
|
/* Finalize the stream transfer to send the last packet */
|
|
Endpoint_ClearIN();
|
|
|
|
keyboard_report_sent = *report;
|
|
}
|
|
|
|
static void send_mouse(report_mouse_t *report)
|
|
{
|
|
#ifdef MOUSE_ENABLE
|
|
|
|
#ifdef BLUETOOTH_ENABLE
|
|
bluefruit_serial_send(0xFD);
|
|
bluefruit_serial_send(0x00);
|
|
bluefruit_serial_send(0x03);
|
|
bluefruit_serial_send(report->buttons);
|
|
bluefruit_serial_send(report->x);
|
|
bluefruit_serial_send(report->y);
|
|
bluefruit_serial_send(report->v); // should try sending the wheel v here
|
|
bluefruit_serial_send(report->h); // should try sending the wheel h here
|
|
bluefruit_serial_send(0x00);
|
|
#endif
|
|
|
|
uint8_t timeout = 255;
|
|
|
|
if (USB_DeviceState != DEVICE_STATE_Configured)
|
|
return;
|
|
|
|
/* Select the Mouse Report Endpoint */
|
|
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
|
|
|
|
/* Check if write ready for a polling interval around 10ms */
|
|
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
|
|
if (!Endpoint_IsReadWriteAllowed()) return;
|
|
|
|
/* Write Mouse Report Data */
|
|
Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
|
|
|
|
/* Finalize the stream transfer to send the last packet */
|
|
Endpoint_ClearIN();
|
|
#endif
|
|
}
|
|
|
|
static void send_system(uint16_t data)
|
|
{
|
|
uint8_t timeout = 255;
|
|
|
|
if (USB_DeviceState != DEVICE_STATE_Configured)
|
|
return;
|
|
|
|
report_extra_t r = {
|
|
.report_id = REPORT_ID_SYSTEM,
|
|
.usage = data
|
|
};
|
|
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
|
|
|
|
/* Check if write ready for a polling interval around 10ms */
|
|
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
|
|
if (!Endpoint_IsReadWriteAllowed()) return;
|
|
|
|
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
static void send_consumer(uint16_t data)
|
|
{
|
|
|
|
#ifdef BLUETOOTH_ENABLE
|
|
static uint16_t last_data = 0;
|
|
if (data == last_data) return;
|
|
last_data = data;
|
|
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
|
|
bluefruit_serial_send(0xFD);
|
|
bluefruit_serial_send(0x00);
|
|
bluefruit_serial_send(0x02);
|
|
bluefruit_serial_send((bitmap>>8)&0xFF);
|
|
bluefruit_serial_send(bitmap&0xFF);
|
|
bluefruit_serial_send(0x00);
|
|
bluefruit_serial_send(0x00);
|
|
bluefruit_serial_send(0x00);
|
|
bluefruit_serial_send(0x00);
|
|
#endif
|
|
|
|
uint8_t timeout = 255;
|
|
|
|
if (USB_DeviceState != DEVICE_STATE_Configured)
|
|
return;
|
|
|
|
report_extra_t r = {
|
|
.report_id = REPORT_ID_CONSUMER,
|
|
.usage = data
|
|
};
|
|
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
|
|
|
|
/* Check if write ready for a polling interval around 10ms */
|
|
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
|
|
if (!Endpoint_IsReadWriteAllowed()) return;
|
|
|
|
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
|
|
Endpoint_ClearIN();
|
|
}
|
|
|
|
|
|
/*******************************************************************************
|
|
* sendchar
|
|
******************************************************************************/
|
|
#ifdef CONSOLE_ENABLE
|
|
#define SEND_TIMEOUT 5
|
|
int8_t sendchar(uint8_t c)
|
|
{
|
|
// Not wait once timeouted.
|
|
// Because sendchar() is called so many times, waiting each call causes big lag.
|
|
static bool timeouted = false;
|
|
|
|
// prevents Console_Task() from running during sendchar() runs.
|
|
// or char will be lost. These two function is mutually exclusive.
|
|
CONSOLE_FLUSH_SET(false);
|
|
|
|
if (USB_DeviceState != DEVICE_STATE_Configured)
|
|
return -1;
|
|
|
|
uint8_t ep = Endpoint_GetCurrentEndpoint();
|
|
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
|
|
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
|
|
goto ERROR_EXIT;
|
|
}
|
|
|
|
if (timeouted && !Endpoint_IsReadWriteAllowed()) {
|
|
goto ERROR_EXIT;
|
|
}
|
|
|
|
timeouted = false;
|
|
|
|
uint8_t timeout = SEND_TIMEOUT;
|
|
while (!Endpoint_IsReadWriteAllowed()) {
|
|
if (USB_DeviceState != DEVICE_STATE_Configured) {
|
|
goto ERROR_EXIT;
|
|
}
|
|
if (Endpoint_IsStalled()) {
|
|
goto ERROR_EXIT;
|
|
}
|
|
if (!(timeout--)) {
|
|
timeouted = true;
|
|
goto ERROR_EXIT;
|
|
}
|
|
_delay_ms(1);
|
|
}
|
|
|
|
Endpoint_Write_8(c);
|
|
|
|
// send when bank is full
|
|
if (!Endpoint_IsReadWriteAllowed()) {
|
|
while (!(Endpoint_IsINReady()));
|
|
Endpoint_ClearIN();
|
|
} else {
|
|
CONSOLE_FLUSH_SET(true);
|
|
}
|
|
|
|
Endpoint_SelectEndpoint(ep);
|
|
return 0;
|
|
ERROR_EXIT:
|
|
Endpoint_SelectEndpoint(ep);
|
|
return -1;
|
|
}
|
|
#else
|
|
int8_t sendchar(uint8_t c)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* MIDI
|
|
******************************************************************************/
|
|
|
|
#ifdef MIDI_ENABLE
|
|
void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) {
|
|
MIDI_EventPacket_t event;
|
|
event.Data1 = byte0;
|
|
event.Data2 = byte1;
|
|
event.Data3 = byte2;
|
|
|
|
uint8_t cable = 0;
|
|
|
|
// Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);
|
|
|
|
//if the length is undefined we assume it is a SYSEX message
|
|
if (midi_packet_length(byte0) == UNDEFINED) {
|
|
switch(cnt) {
|
|
case 3:
|
|
if (byte2 == SYSEX_END)
|
|
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_3);
|
|
else
|
|
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
|
|
break;
|
|
case 2:
|
|
if (byte1 == SYSEX_END)
|
|
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_2);
|
|
else
|
|
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
|
|
break;
|
|
case 1:
|
|
if (byte0 == SYSEX_END)
|
|
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_1);
|
|
else
|
|
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
|
|
break;
|
|
default:
|
|
return; //invalid cnt
|
|
}
|
|
} else {
|
|
//deal with 'system common' messages
|
|
//TODO are there any more?
|
|
switch(byte0 & 0xF0){
|
|
case MIDI_SONGPOSITION:
|
|
event.Event = MIDI_EVENT(cable, SYS_COMMON_3);
|
|
break;
|
|
case MIDI_SONGSELECT:
|
|
case MIDI_TC_QUARTERFRAME:
|
|
event.Event = MIDI_EVENT(cable, SYS_COMMON_2);
|
|
break;
|
|
default:
|
|
event.Event = MIDI_EVENT(cable, byte0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
// Endpoint_Write_Stream_LE(&event, sizeof(event), NULL);
|
|
// Endpoint_ClearIN();
|
|
|
|
MIDI_Device_SendEventPacket(&USB_MIDI_Interface, &event);
|
|
MIDI_Device_Flush(&USB_MIDI_Interface);
|
|
MIDI_Device_USBTask(&USB_MIDI_Interface);
|
|
USB_USBTask();
|
|
}
|
|
|
|
void usb_get_midi(MidiDevice * device) {
|
|
MIDI_EventPacket_t event;
|
|
while (MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, &event)) {
|
|
|
|
midi_packet_length_t length = midi_packet_length(event.Data1);
|
|
uint8_t input[3];
|
|
input[0] = event.Data1;
|
|
input[1] = event.Data2;
|
|
input[2] = event.Data3;
|
|
if (length == UNDEFINED) {
|
|
//sysex
|
|
if (event.Event == MIDI_EVENT(0, SYSEX_START_OR_CONT) || event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_3)) {
|
|
length = 3;
|
|
} else if (event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_2)) {
|
|
length = 2;
|
|
} else if(event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_1)) {
|
|
length = 1;
|
|
} else {
|
|
//XXX what to do?
|
|
}
|
|
}
|
|
|
|
//pass the data to the device input function
|
|
if (length != UNDEFINED)
|
|
midi_device_input(device, length, input);
|
|
}
|
|
MIDI_Device_USBTask(&USB_MIDI_Interface);
|
|
USB_USBTask();
|
|
}
|
|
|
|
void midi_usb_init(MidiDevice * device){
|
|
midi_device_init(device);
|
|
midi_device_set_send_func(device, usb_send_func);
|
|
midi_device_set_pre_input_process_func(device, usb_get_midi);
|
|
|
|
SetupHardware();
|
|
sei();
|
|
}
|
|
|
|
void MIDI_Task(void)
|
|
{
|
|
|
|
/* Device must be connected and configured for the task to run */
|
|
dprint("in MIDI_TASK\n");
|
|
if (USB_DeviceState != DEVICE_STATE_Configured)
|
|
return;
|
|
dprint("continuing in MIDI_TASK\n");
|
|
|
|
Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR);
|
|
|
|
if (Endpoint_IsINReady())
|
|
{
|
|
|
|
dprint("Endpoint is ready\n");
|
|
|
|
uint8_t MIDICommand = 0;
|
|
uint8_t MIDIPitch;
|
|
|
|
/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
|
|
uint8_t Channel = MIDI_CHANNEL(1);
|
|
|
|
MIDICommand = MIDI_COMMAND_NOTE_ON;
|
|
MIDIPitch = 0x3E;
|
|
|
|
/* Check if a MIDI command is to be sent */
|
|
if (MIDICommand)
|
|
{
|
|
dprint("Command exists\n");
|
|
MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
|
|
{
|
|
.Event = MIDI_EVENT(0, MIDICommand),
|
|
|
|
.Data1 = MIDICommand | Channel,
|
|
.Data2 = MIDIPitch,
|
|
.Data3 = MIDI_STANDARD_VELOCITY,
|
|
};
|
|
|
|
/* Write the MIDI event packet to the endpoint */
|
|
Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
|
|
|
|
/* Send the data in the endpoint to the host */
|
|
Endpoint_ClearIN();
|
|
}
|
|
}
|
|
|
|
|
|
/* Select the MIDI OUT stream */
|
|
Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR);
|
|
|
|
/* Check if a MIDI command has been received */
|
|
if (Endpoint_IsOUTReceived())
|
|
{
|
|
MIDI_EventPacket_t MIDIEvent;
|
|
|
|
/* Read the MIDI event packet from the endpoint */
|
|
Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
|
|
|
|
/* If the endpoint is now empty, clear the bank */
|
|
if (!(Endpoint_BytesInEndpoint()))
|
|
{
|
|
/* Clear the endpoint ready for new packet */
|
|
Endpoint_ClearOUT();
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
/*******************************************************************************
|
|
* main
|
|
******************************************************************************/
|
|
static void setup_mcu(void)
|
|
{
|
|
/* Disable watchdog if enabled by bootloader/fuses */
|
|
MCUSR &= ~(1 << WDRF);
|
|
wdt_disable();
|
|
|
|
/* Disable clock division */
|
|
clock_prescale_set(clock_div_1);
|
|
}
|
|
|
|
static void setup_usb(void)
|
|
{
|
|
// Leonardo needs. Without this USB device is not recognized.
|
|
USB_Disable();
|
|
|
|
USB_Init();
|
|
|
|
// for Console_Task
|
|
USB_Device_EnableSOFEvents();
|
|
print_set_sendchar(sendchar);
|
|
}
|
|
|
|
|
|
#ifdef MIDI_ENABLE
|
|
void fallthrough_callback(MidiDevice * device,
|
|
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
|
|
void cc_callback(MidiDevice * device,
|
|
uint8_t chan, uint8_t num, uint8_t val);
|
|
void sysex_callback(MidiDevice * device,
|
|
uint16_t start, uint8_t length, uint8_t * data);
|
|
#endif
|
|
|
|
int main(void) __attribute__ ((weak));
|
|
int main(void)
|
|
{
|
|
|
|
#ifdef MIDI_ENABLE
|
|
midi_device_init(&midi_device);
|
|
midi_device_set_send_func(&midi_device, usb_send_func);
|
|
midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
|
|
#endif
|
|
|
|
setup_mcu();
|
|
keyboard_setup();
|
|
setup_usb();
|
|
sei();
|
|
|
|
#ifdef MIDI_ENABLE
|
|
midi_register_fallthrough_callback(&midi_device, fallthrough_callback);
|
|
midi_register_cc_callback(&midi_device, cc_callback);
|
|
midi_register_sysex_callback(&midi_device, sysex_callback);
|
|
|
|
init_notes();
|
|
// midi_send_cc(&midi_device, 0, 1, 2);
|
|
// midi_send_cc(&midi_device, 15, 1, 0);
|
|
// midi_send_noteon(&midi_device, 0, 64, 127);
|
|
// midi_send_noteoff(&midi_device, 0, 64, 127);
|
|
#endif
|
|
|
|
#ifdef BLUETOOTH_ENABLE
|
|
serial_init();
|
|
#endif
|
|
|
|
/* wait for USB startup & debug output */
|
|
|
|
#ifdef WAIT_FOR_USB
|
|
while (USB_DeviceState != DEVICE_STATE_Configured) {
|
|
#if defined(INTERRUPT_CONTROL_ENDPOINT)
|
|
;
|
|
#else
|
|
USB_USBTask();
|
|
#endif
|
|
}
|
|
print("USB configured.\n");
|
|
#else
|
|
USB_USBTask();
|
|
#endif
|
|
/* init modules */
|
|
keyboard_init();
|
|
host_set_driver(&lufa_driver);
|
|
#ifdef SLEEP_LED_ENABLE
|
|
sleep_led_init();
|
|
#endif
|
|
|
|
print("Keyboard start.\n");
|
|
while (1) {
|
|
#ifndef BLUETOOTH_ENABLE
|
|
while (USB_DeviceState == DEVICE_STATE_Suspended) {
|
|
print("[s]");
|
|
suspend_power_down();
|
|
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
|
|
USB_Device_SendRemoteWakeup();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef MIDI_ENABLE
|
|
midi_device_process(&midi_device);
|
|
// MIDI_Task();
|
|
#endif
|
|
keyboard_task();
|
|
|
|
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
|
|
USB_USBTask();
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#ifdef MIDI_ENABLE
|
|
void fallthrough_callback(MidiDevice * device,
|
|
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2){
|
|
|
|
#ifdef AUDIO_ENABLE
|
|
if (cnt == 3) {
|
|
switch (byte0 & 0xF0) {
|
|
case MIDI_NOTEON:
|
|
play_note(((double)261.6)*pow(2.0, -1.0)*pow(2.0,(byte1 & 0x7F)/12.0), (byte2 & 0x7F) / 8);
|
|
break;
|
|
case MIDI_NOTEOFF:
|
|
stop_note(((double)261.6)*pow(2.0, -1.0)*pow(2.0,(byte1 & 0x7F)/12.0));
|
|
break;
|
|
}
|
|
}
|
|
if (byte0 == MIDI_STOP) {
|
|
stop_all_notes();
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void cc_callback(MidiDevice * device,
|
|
uint8_t chan, uint8_t num, uint8_t val) {
|
|
//sending it back on the next channel
|
|
midi_send_cc(device, (chan + 1) % 16, num, val);
|
|
}
|
|
|
|
void sysex_callback(MidiDevice * device,
|
|
uint16_t start, uint8_t length, uint8_t * data) {
|
|
for (int i = 0; i < length; i++)
|
|
midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i));
|
|
}
|
|
#endif
|