forked from mirrors/qmk_firmware
4b453dca92
* remove keyboard-level instances of `MIDI_ENABLE = no` Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} + ``` Co-Authored-By: Nick Brassel <nick@tzarc.org> * fix case-sensitivity issues on MIDI_ENABLE Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} + ``` * replace `# MIDI controls` with `# MIDI support` Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} + ``` * align inline comments Aligns the inline comments to the length used by the QMK AVR rules.mk template. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes # MIDI support;g' {} + ``` * remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} + ``` * remove MIDI configuration boilerplate from keyboard config.h files Co-authored-by: Nick Brassel <nick@tzarc.org> |
||
---|---|---|
.. | ||
keymaps | ||
rev1 | ||
.noci | ||
config.h | ||
halconf.h | ||
matrix.c | ||
mcuconf.h | ||
mun.c | ||
mun.h | ||
readme.md | ||
rules.mk |
Mün
Mün is powered by STM32 with full QMK support. Each key has super-bright RGB backlighting and MX Kailh hotswap sockets. No soldering is required to get a fully functioning keyboard. There are an additional 14 rear-facing RGB LEDs on each side. Each half can be configured to run as master or slave with the two USB-C ports. They also support up to two rotary encoders and one OLED panel per half.
Keyboard Maintainer: Legonut
Hardware Supported: Mün PCB R1.0, R1.1, R1.2
Hardware Availability: RGBKB
Make example for this keyboard (after setting up your build environment):
make rgbkb/mun:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.