forked from mirrors/qmk_firmware
255 lines
9.4 KiB
C
255 lines
9.4 KiB
C
/*
|
|
Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
|
|
2020 Pierre Chevalier <pierrechevalier83@gmail.com>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* This code was heavily inspired by the ergodox_ez keymap, and modernized
|
|
* to take advantage of the quantum.h microcontroller agnostics gpio control
|
|
* abstractions and use the macros defined in config.h for the wiring as opposed
|
|
* to repeating that information all over the place.
|
|
*/
|
|
|
|
#include "matrix.h"
|
|
#include "debug.h"
|
|
#include "wait.h"
|
|
#include "i2c_master.h"
|
|
|
|
extern i2c_status_t mcp23017_status;
|
|
#define I2C_TIMEOUT 1000
|
|
|
|
// For a better understanding of the i2c protocol, this is a good read:
|
|
// https://www.robot-electronics.co.uk/i2c-tutorial
|
|
|
|
// I2C address:
|
|
// See the datasheet, section 3.3.1 on addressing I2C devices and figure 3-6 for an
|
|
// illustration
|
|
// http://ww1.microchip.com/downloads/en/devicedoc/20001952c.pdf
|
|
// All address pins of the mcp23017 are connected to the ground on the ferris
|
|
// | 0 | 1 | 0 | 0 | A2 | A1 | A0 |
|
|
// | 0 | 1 | 0 | 0 | 0 | 0 | 0 |
|
|
#define I2C_ADDR 0b0100000
|
|
#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
|
|
#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
|
|
|
|
// Register addresses
|
|
// See https://github.com/adafruit/Adafruit-MCP23017-Arduino-Library/blob/master/Adafruit_MCP23017.h
|
|
#define IODIRA 0x00 // i/o direction register
|
|
#define IODIRB 0x01
|
|
#define GPPUA 0x0C // GPIO pull-up resistor register
|
|
#define GPPUB 0x0D
|
|
#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT)
|
|
#define GPIOB 0x13
|
|
#define OLATA 0x14 // output latch register
|
|
#define OLATB 0x15
|
|
|
|
bool i2c_initialized = 0;
|
|
i2c_status_t mcp23017_status = I2C_ADDR;
|
|
|
|
uint8_t init_mcp23017(void) {
|
|
print("starting init");
|
|
mcp23017_status = I2C_ADDR;
|
|
|
|
// I2C subsystem
|
|
if (i2c_initialized == 0) {
|
|
i2c_init(); // on pins D(1,0)
|
|
i2c_initialized = true;
|
|
wait_ms(I2C_TIMEOUT);
|
|
}
|
|
|
|
// set pin direction
|
|
// - unused : input : 1
|
|
// - input : input : 1
|
|
// - driving : output : 0
|
|
// This means: we will read all the bits on GPIOA
|
|
// This means: we will write to the pins 0-4 on GPIOB (in select_rows)
|
|
uint8_t buf[] = {IODIRA, 0b11111111, 0b11110000};
|
|
mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
|
|
if (!mcp23017_status) {
|
|
// set pull-up
|
|
// - unused : on : 1
|
|
// - input : on : 1
|
|
// - driving : off : 0
|
|
// This means: we will read all the bits on GPIOA
|
|
// This means: we will write to the pins 0-4 on GPIOB (in select_rows)
|
|
uint8_t pullup_buf[] = {GPPUA, 0b11111111, 0b11110000};
|
|
mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, pullup_buf, sizeof(pullup_buf), I2C_TIMEOUT);
|
|
}
|
|
return mcp23017_status;
|
|
}
|
|
|
|
/* matrix state(1:on, 0:off) */
|
|
static matrix_row_t matrix[MATRIX_ROWS]; // debounced values
|
|
|
|
static matrix_row_t read_cols(uint8_t row);
|
|
static void init_cols(void);
|
|
static void unselect_rows(void);
|
|
static void select_row(uint8_t row);
|
|
|
|
static uint8_t mcp23017_reset_loop;
|
|
|
|
void matrix_init_custom(void) {
|
|
// initialize row and col
|
|
|
|
mcp23017_status = init_mcp23017();
|
|
|
|
unselect_rows();
|
|
init_cols();
|
|
|
|
// initialize matrix state: all keys off
|
|
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
matrix[i] = 0;
|
|
}
|
|
}
|
|
|
|
void matrix_power_up(void) {
|
|
mcp23017_status = init_mcp23017();
|
|
|
|
unselect_rows();
|
|
init_cols();
|
|
|
|
// initialize matrix state: all keys off
|
|
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
matrix[i] = 0;
|
|
}
|
|
}
|
|
|
|
// Reads and stores a row, returning
|
|
// whether a change occurred.
|
|
static inline bool store_matrix_row(matrix_row_t current_matrix[], uint8_t index) {
|
|
matrix_row_t temp = read_cols(index);
|
|
if (current_matrix[index] != temp) {
|
|
current_matrix[index] = temp;
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
|
|
if (mcp23017_status) { // if there was an error
|
|
if (++mcp23017_reset_loop == 0) {
|
|
// if (++mcp23017_reset_loop >= 1300) {
|
|
// since mcp23017_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
|
|
// this will be approx bit more frequent than once per second
|
|
dprint("trying to reset mcp23017\n");
|
|
mcp23017_status = init_mcp23017();
|
|
if (mcp23017_status) {
|
|
dprint("right side not responding\n");
|
|
} else {
|
|
dprint("right side attached\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
bool changed = false;
|
|
for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
|
|
// select rows from left and right hands
|
|
uint8_t left_index = i;
|
|
uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
|
|
select_row(left_index);
|
|
select_row(right_index);
|
|
|
|
// we don't need a 30us delay anymore, because selecting a
|
|
// left-hand row requires more than 30us for i2c.
|
|
|
|
changed |= store_matrix_row(current_matrix, left_index);
|
|
changed |= store_matrix_row(current_matrix, right_index);
|
|
|
|
unselect_rows();
|
|
}
|
|
|
|
return changed;
|
|
}
|
|
|
|
static void init_cols(void) {
|
|
// init on mcp23017
|
|
// not needed, already done as part of init_mcp23017()
|
|
|
|
// init on mcu
|
|
pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU;
|
|
for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) {
|
|
pin_t pin = matrix_col_pins_mcu[pin_index];
|
|
setPinInput(pin);
|
|
writePinHigh(pin);
|
|
}
|
|
}
|
|
|
|
static matrix_row_t read_cols(uint8_t row) {
|
|
if (row < MATRIX_ROWS_PER_SIDE) {
|
|
pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU;
|
|
matrix_row_t current_row_value = 0;
|
|
// For each col...
|
|
for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) {
|
|
// Select the col pin to read (active low)
|
|
uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]);
|
|
|
|
// Populate the matrix row with the state of the col pin
|
|
current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
|
|
}
|
|
return current_row_value;
|
|
} else {
|
|
if (mcp23017_status) { // if there was an error
|
|
return 0;
|
|
} else {
|
|
uint8_t buf[] = {GPIOA};
|
|
mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
|
|
// We read all the pins on GPIOA.
|
|
// The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
|
|
// The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
|
|
// Since the pins connected to eact columns are sequential, and counting from zero up (col 5 -> GPIOA0, col 6 -> GPIOA1 and so on), the only transformation needed is a bitwise not to swap all zeroes and ones.
|
|
uint8_t data[] = {0};
|
|
if (!mcp23017_status) {
|
|
mcp23017_status = i2c_receive(I2C_ADDR_READ, data, sizeof(data), I2C_TIMEOUT);
|
|
data[0] = ~(data[0]);
|
|
}
|
|
return data[0];
|
|
}
|
|
}
|
|
}
|
|
|
|
static void unselect_rows(void) {
|
|
// no need to unselect on mcp23017, because the select step sets all
|
|
// the other row bits high, and it's not changing to a different
|
|
// direction
|
|
|
|
// unselect rows on microcontroller
|
|
pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
|
|
for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) {
|
|
pin_t pin = matrix_row_pins_mcu[pin_index];
|
|
setPinInput(pin);
|
|
writePinLow(pin);
|
|
}
|
|
}
|
|
|
|
static void select_row(uint8_t row) {
|
|
if (row < MATRIX_ROWS_PER_SIDE) {
|
|
// select on atmega32u4
|
|
pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
|
|
pin_t pin = matrix_row_pins_mcu[row];
|
|
setPinOutput(pin);
|
|
writePinLow(pin);
|
|
} else {
|
|
// select on mcp23017
|
|
if (mcp23017_status) { // if there was an error
|
|
// do nothing
|
|
} else {
|
|
// Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
|
|
// Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
|
|
uint8_t buf[] = {GPIOB, 0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE))};
|
|
mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
|
|
}
|
|
}
|
|
}
|