darkkirb/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/sixkeyboard
History
Ryan 56555c61e1
Migrate LAYOUTS to data driven (#19541) 
* Migrate `LAYOUTS` to data driven, 0-9

* Migrate `LAYOUTS` to data driven, A

* Migrate `LAYOUTS` to data driven, B

* Migrate `LAYOUTS` to data driven, C

* Migrate `LAYOUTS` to data driven, D

* Migrate `LAYOUTS` to data driven, E

* Migrate `LAYOUTS` to data driven, F

* Migrate `LAYOUTS` to data driven, G

* Migrate `LAYOUTS` to data driven, H

* Migrate `LAYOUTS` to data driven, handwired

* Migrate `LAYOUTS` to data driven, I

* Migrate `LAYOUTS` to data driven, J

* Migrate `LAYOUTS` to data driven, K

* Migrate `LAYOUTS` to data driven, L

* Migrate `LAYOUTS` to data driven, M

* Migrate `LAYOUTS` to data driven, N

* Migrate `LAYOUTS` to data driven, O

* Migrate `LAYOUTS` to data driven, P

* Migrate `LAYOUTS` to data driven, Q

* Migrate `LAYOUTS` to data driven, R

* Migrate `LAYOUTS` to data driven, S

* Migrate `LAYOUTS` to data driven, T

* Migrate `LAYOUTS` to data driven, U

* Migrate `LAYOUTS` to data driven, V

* Migrate `LAYOUTS` to data driven, W

* Migrate `LAYOUTS` to data driven, X

* Migrate `LAYOUTS` to data driven, Y

* Migrate `LAYOUTS` to data driven, Z
2023-01-10 02:48:20 +00:00
..
keymaps Remove unnecessary backslash-escapes in default keymaps (#15472) 2021-12-14 12:41:16 +00:00
config.h Remove all BACKLIGHT_LEVELS 0 (#18630) 2022-10-07 09:07:56 +01:00
info.json Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
matrix.c Remove matrix_key_count() (#16603) 2022-03-10 12:18:07 +00:00
readme.md
rules.mk Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
sixkeyboard.c
sixkeyboard.h

readme.md

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community
Hardware Supported: Techkeys SixKeyBoard PCB
Hardware Availability: Techkeys

Make example for this keyboard (after setting up your build environment):

make sixkeyboard:default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.