qmk_firmware/drivers/led/issi/is31fl3729-mono.c
HorrorTroll f6709e65eb
Add RGB matrix & LED Matrix support for IS31FL3729 (#21944)
Co-authored-by: Xelus22 <preyas22@gmail.com>
Co-authored-by: dexter93 <d3xter93@gmail.com>
2024-02-17 01:41:35 +11:00

220 lines
7.6 KiB
C

/* Copyright 2024 HorrorTroll <https://github.com/HorrorTroll>
* Copyright 2024 Harrison Chan (Xelus)
* Copyright 2024 Dimitris Mantzouranis <d3xter93@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "is31fl3729-mono.h"
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3729_PWM_REGISTER_COUNT 143
#define IS31FL3729_SCALING_REGISTER_COUNT 16
#ifndef IS31FL3729_I2C_TIMEOUT
# define IS31FL3729_I2C_TIMEOUT 100
#endif
#ifndef IS31FL3729_I2C_PERSISTENCE
# define IS31FL3729_I2C_PERSISTENCE 0
#endif
#ifndef IS31FL3729_CONFIGURATION
# define IS31FL3729_CONFIGURATION IS31FL3729_CONFIG_SWS_15_9
#endif
#ifndef IS31FL3729_GLOBAL_CURRENT
# define IS31FL3729_GLOBAL_CURRENT 0x40
#endif
#ifndef IS31FL3729_PULLDOWNUP
# define IS31FL3729_PULLDOWNUP 0x33
#endif
#ifndef IS31FL3729_SPREAD_SPECTRUM
# define IS31FL3729_SPREAD_SPECTRUM IS31FL3729_SSP_DISABLE
#endif
#ifndef IS31FL3729_SPREAD_SPECTRUM_RANGE
# define IS31FL3729_SPREAD_SPECTRUM_RANGE IS31FL3729_RNG_5_PERCENT
#endif
#ifndef IS31FL3729_SPREAD_SPECTRUM_CYCLE_TIME
# define IS31FL3729_SPREAD_SPECTRUM_CYCLE_TIME IS31FL3729_CLT_1980_US
#endif
#ifndef IS31FL3729_PWM_FREQUENCY
# define IS31FL3729_PWM_FREQUENCY IS31FL3729_PWM_FREQUENCY_32K_HZ
#endif
// These buffers match the PWM & scaling registers.
// Storing them like this is optimal for I2C transfers to the registers.
typedef struct is31fl3729_driver_t {
uint8_t pwm_buffer[IS31FL3729_PWM_REGISTER_COUNT];
bool pwm_buffer_dirty;
uint8_t scaling_buffer[IS31FL3729_SCALING_REGISTER_COUNT];
bool scaling_buffer_dirty;
} PACKED is31fl3729_driver_t;
is31fl3729_driver_t driver_buffers[IS31FL3729_DRIVER_COUNT] = {{
.pwm_buffer = {0},
.pwm_buffer_dirty = false,
.scaling_buffer = {0},
.scaling_buffer_dirty = false,
}};
void is31fl3729_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
#if IS31FL3729_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3729_I2C_PERSISTENCE; i++) {
if (i2c_write_register(addr << 1, reg, &data, 1, IS31FL3729_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
}
#else
i2c_write_register(addr << 1, reg, &data, 1, IS31FL3729_I2C_TIMEOUT);
#endif
}
void is31fl3729_write_pwm_buffer(uint8_t addr, uint8_t index) {
// Transmit PWM registers in 9 transfers of 16 bytes.
// Iterate over the pwm_buffer contents at 16 byte intervals.
for (uint8_t i = 0; i <= IS31FL3729_PWM_REGISTER_COUNT; i += 16) {
#if IS31FL3729_I2C_PERSISTENCE > 0
for (uint8_t j = 0; j < IS31FL3729_I2C_PERSISTENCE; j++) {
if (i2c_write_register(addr << 1, i, driver_buffers[index].pwm_buffer + i, 16, IS31FL3729_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
}
#else
i2c_write_register(addr << 1, i, driver_buffers[index].pwm_buffer + i, 16, IS31FL3729_I2C_TIMEOUT);
#endif
}
}
void is31fl3729_init_drivers(void) {
i2c_init();
is31fl3729_init(IS31FL3729_I2C_ADDRESS_1);
#if defined(IS31FL3729_I2C_ADDRESS_2)
is31fl3729_init(IS31FL3729_I2C_ADDRESS_2);
# if defined(IS31FL3729_I2C_ADDRESS_3)
is31fl3729_init(IS31FL3729_I2C_ADDRESS_3);
# if defined(IS31FL3729_I2C_ADDRESS_4)
is31fl3729_init(IS31FL3729_I2C_ADDRESS_4);
# endif
# endif
#endif
for (int i = 0; i < IS31FL3729_LED_COUNT; i++) {
is31fl3729_set_scaling_register(i, 0xFF);
}
is31fl3729_update_scaling_registers(IS31FL3729_I2C_ADDRESS_1, 0);
#if defined(IS31FL3729_I2C_ADDRESS_2)
is31fl3729_update_scaling_registers(IS31FL3729_I2C_ADDRESS_2, 1);
# if defined(IS31FL3729_I2C_ADDRESS_3)
is31fl3729_update_scaling_registers(IS31FL3729_I2C_ADDRESS_3, 2);
# if defined(IS31FL3729_I2C_ADDRESS_4)
is31fl3729_update_scaling_registers(IS31FL3729_I2C_ADDRESS_4, 3);
# endif
# endif
#endif
}
void is31fl3729_init(uint8_t addr) {
// In order to avoid the LEDs being driven with garbage data
// in the LED driver's PWM registers, shutdown is enabled last.
// Set up the mode and other settings, clear the PWM registers,
// then disable software shutdown.
// Set Pull up & Down for SWx CSy
is31fl3729_write_register(addr, IS31FL3729_REG_PULLDOWNUP, IS31FL3729_PULLDOWNUP);
// Set Spread Spectrum Register if applicable
is31fl3729_write_register(addr, IS31FL3729_REG_SPREAD_SPECTRUM, ((IS31FL3729_SPREAD_SPECTRUM & 0b1) << 4) | ((IS31FL3729_SPREAD_SPECTRUM_RANGE & 0b11) << 2) | (IS31FL3729_SPREAD_SPECTRUM_CYCLE_TIME & 0b11));
// Set PWM Frequency Register if applicable
is31fl3729_write_register(addr, IS31FL3729_REG_PWM_FREQUENCY, IS31FL3729_PWM_FREQUENCY);
// Set Golbal Current Control Register
is31fl3729_write_register(addr, IS31FL3729_REG_GLOBAL_CURRENT, IS31FL3729_GLOBAL_CURRENT);
// Set to Normal operation
is31fl3729_write_register(addr, IS31FL3729_REG_CONFIGURATION, IS31FL3729_CONFIGURATION);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
}
void is31fl3729_set_value(int index, uint8_t value) {
is31fl3729_led_t led;
if (index >= 0 && index < IS31FL3729_LED_COUNT) {
memcpy_P(&led, (&g_is31fl3729_leds[index]), sizeof(led));
if (driver_buffers[led.driver].pwm_buffer[led.v] == value) {
return;
}
driver_buffers[led.driver].pwm_buffer[led.v] = value;
driver_buffers[led.driver].pwm_buffer_dirty = true;
}
}
void is31fl3729_set_value_all(uint8_t value) {
for (int i = 0; i < IS31FL3729_LED_COUNT; i++) {
is31fl3729_set_value(i, value);
}
}
void is31fl3729_set_scaling_register(uint8_t index, uint8_t value) {
is31fl3729_led_t led;
memcpy_P(&led, (&g_is31fl3729_leds[index]), sizeof(led));
// need to do a bit of checking here since 3729 scaling is per CS pin.
// not the usual per single LED key as per other ISSI drivers
// only enable them, since they should be default disabled
int cs_value = (led.v & 0x0F) - 1;
driver_buffers[led.driver].scaling_buffer[cs_value] = value;
driver_buffers[led.driver].scaling_buffer_dirty = true;
}
void is31fl3729_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (driver_buffers[index].pwm_buffer_dirty) {
is31fl3729_write_pwm_buffer(addr, index);
driver_buffers[index].pwm_buffer_dirty = false;
}
}
void is31fl3729_update_scaling_registers(uint8_t addr, uint8_t index) {
if (driver_buffers[index].scaling_buffer_dirty) {
for (uint8_t i = 0; i < IS31FL3729_SCALING_REGISTER_COUNT; i++) {
is31fl3729_write_register(addr, IS31FL3729_REG_SCALING + i, driver_buffers[index].scaling_buffer[i]);
}
driver_buffers[index].scaling_buffer_dirty = false;
}
}
void is31fl3729_flush(void) {
is31fl3729_update_pwm_buffers(IS31FL3729_I2C_ADDRESS_1, 0);
#if defined(IS31FL3729_I2C_ADDRESS_2)
is31fl3729_update_pwm_buffers(IS31FL3729_I2C_ADDRESS_2, 1);
# if defined(IS31FL3729_I2C_ADDRESS_3)
is31fl3729_update_pwm_buffers(IS31FL3729_I2C_ADDRESS_3, 2);
# if defined(IS31FL3729_I2C_ADDRESS_4)
is31fl3729_update_pwm_buffers(IS31FL3729_I2C_ADDRESS_4, 3);
# endif
# endif
#endif
}