qmk_firmware/platforms/chibios/eeprom_teensy.c
2021-11-19 10:41:02 -08:00

795 lines
27 KiB
C

#include <ch.h>
#include <hal.h>
#include "eeconfig.h"
/*************************************/
/* Hardware backend */
/* */
/* Code from PJRC/Teensyduino */
/*************************************/
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* 1. The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* 2. If the Software is incorporated into a build system that allows
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#define SMC_PMSTAT_RUN ((uint8_t)0x01)
#define SMC_PMSTAT_HSRUN ((uint8_t)0x80)
#define F_CPU KINETIS_SYSCLK_FREQUENCY
static inline int kinetis_hsrun_disable(void) {
#if defined(MK66F18)
if (SMC->PMSTAT == SMC_PMSTAT_HSRUN) {
// First, reduce the CPU clock speed, but do not change
// the peripheral speed (F_BUS). Serial1 & Serial2 baud
// rates will be impacted, but most other peripherals
// will continue functioning at the same speed.
# if F_CPU == 256000000 && F_BUS == 64000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // TODO: TEST
# elif F_CPU == 256000000 && F_BUS == 128000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // TODO: TEST
# elif F_CPU == 240000000 && F_BUS == 60000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // ok
# elif F_CPU == 240000000 && F_BUS == 80000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok
# elif F_CPU == 240000000 && F_BUS == 120000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok
# elif F_CPU == 216000000 && F_BUS == 54000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // ok
# elif F_CPU == 216000000 && F_BUS == 72000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok
# elif F_CPU == 216000000 && F_BUS == 108000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok
# elif F_CPU == 192000000 && F_BUS == 48000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // ok
# elif F_CPU == 192000000 && F_BUS == 64000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok
# elif F_CPU == 192000000 && F_BUS == 96000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok
# elif F_CPU == 180000000 && F_BUS == 60000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok
# elif F_CPU == 180000000 && F_BUS == 90000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok
# elif F_CPU == 168000000 && F_BUS == 56000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 5); // ok
# elif F_CPU == 144000000 && F_BUS == 48000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 5); // ok
# elif F_CPU == 144000000 && F_BUS == 72000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 5); // ok
# elif F_CPU == 120000000 && F_BUS == 60000000
SIM->CLKDIV1 = SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1 - 1) | SIM_CLKDIV1_OUTDIV2(KINETIS_CLKDIV1_OUTDIV2 - 1) |
# if defined(MK66F18)
SIM_CLKDIV1_OUTDIV3(KINETIS_CLKDIV1_OUTDIV3 - 1) |
# endif
SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4 - 1);
# else
return 0;
# endif
// Then turn off HSRUN mode
SMC->PMCTRL = SMC_PMCTRL_RUNM_SET(0);
while (SMC->PMSTAT == SMC_PMSTAT_HSRUN)
; // wait
return 1;
}
#endif
return 0;
}
static inline int kinetis_hsrun_enable(void) {
#if defined(MK66F18)
if (SMC->PMSTAT == SMC_PMSTAT_RUN) {
// Turn HSRUN mode on
SMC->PMCTRL = SMC_PMCTRL_RUNM_SET(3);
while (SMC->PMSTAT != SMC_PMSTAT_HSRUN) {
;
} // wait
// Then configure clock for full speed
# if F_CPU == 256000000 && F_BUS == 64000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 7);
# elif F_CPU == 256000000 && F_BUS == 128000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 7);
# elif F_CPU == 240000000 && F_BUS == 60000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 7);
# elif F_CPU == 240000000 && F_BUS == 80000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 7);
# elif F_CPU == 240000000 && F_BUS == 120000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 7);
# elif F_CPU == 216000000 && F_BUS == 54000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 7);
# elif F_CPU == 216000000 && F_BUS == 72000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 7);
# elif F_CPU == 216000000 && F_BUS == 108000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 7);
# elif F_CPU == 192000000 && F_BUS == 48000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 6);
# elif F_CPU == 192000000 && F_BUS == 64000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 6);
# elif F_CPU == 192000000 && F_BUS == 96000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 6);
# elif F_CPU == 180000000 && F_BUS == 60000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 6);
# elif F_CPU == 180000000 && F_BUS == 90000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 6);
# elif F_CPU == 168000000 && F_BUS == 56000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 5);
# elif F_CPU == 144000000 && F_BUS == 48000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 4);
# elif F_CPU == 144000000 && F_BUS == 72000000
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 4);
# elif F_CPU == 120000000 && F_BUS == 60000000
SIM->CLKDIV1 = SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1 - 1) | SIM_CLKDIV1_OUTDIV2(KINETIS_CLKDIV1_OUTDIV2 - 1) |
# if defined(MK66F18)
SIM_CLKDIV1_OUTDIV3(KINETIS_CLKDIV1_OUTDIV3 - 1) |
# endif
SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4 - 1);
# else
return 0;
# endif
return 1;
}
#endif
return 0;
}
#if defined(K20x) || defined(MK66F18) /* chip selection */
/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */
// The EEPROM is really RAM with a hardware-based backup system to
// flash memory. Selecting a smaller size EEPROM allows more wear
// leveling, for higher write endurance. If you edit this file,
// set this to the smallest size your application can use. Also,
// due to Freescale's implementation, writing 16 or 32 bit words
// (aligned to 2 or 4 byte boundaries) has twice the endurance
// compared to writing 8 bit bytes.
//
# ifndef EEPROM_SIZE
# define EEPROM_SIZE 32
# endif
/*
^^^ Here be dragons:
NXP AppNote AN4282 section 3.1 states that partitioning must only be done once.
Once EEPROM partitioning is done, the size is locked to this initial configuration.
Attempts to modify the EEPROM_SIZE setting may brick your board.
*/
// Writing unaligned 16 or 32 bit data is handled automatically when
// this is defined, but at a cost of extra code size. Without this,
// any unaligned write will cause a hard fault exception! If you're
// absolutely sure all 16 and 32 bit writes will be aligned, you can
// remove the extra unnecessary code.
//
# define HANDLE_UNALIGNED_WRITES
# if defined(K20x)
# define EEPROM_MAX 2048
# define EEPARTITION 0x03 // all 32K dataflash for EEPROM, none for Data
# define EEESPLIT 0x30 // must be 0x30 on these chips
# elif defined(MK66F18)
# define EEPROM_MAX 4096
# define EEPARTITION 0x05 // 128K dataflash for EEPROM, 128K for Data
# define EEESPLIT 0x10 // best endurance: 0x00 = first 12%, 0x10 = first 25%, 0x30 = all equal
# endif
// Minimum EEPROM Endurance
// ------------------------
# if (EEPROM_SIZE == 4096)
# define EEESIZE 0x02
# elif (EEPROM_SIZE == 2048) // 35000 writes/byte or 70000 writes/word
# define EEESIZE 0x03
# elif (EEPROM_SIZE == 1024) // 75000 writes/byte or 150000 writes/word
# define EEESIZE 0x04
# elif (EEPROM_SIZE == 512) // 155000 writes/byte or 310000 writes/word
# define EEESIZE 0x05
# elif (EEPROM_SIZE == 256) // 315000 writes/byte or 630000 writes/word
# define EEESIZE 0x06
# elif (EEPROM_SIZE == 128) // 635000 writes/byte or 1270000 writes/word
# define EEESIZE 0x07
# elif (EEPROM_SIZE == 64) // 1275000 writes/byte or 2550000 writes/word
# define EEESIZE 0x08
# elif (EEPROM_SIZE == 32) // 2555000 writes/byte or 5110000 writes/word
# define EEESIZE 0x09
# endif
/** \brief eeprom initialization
*
* FIXME: needs doc
*/
void eeprom_initialize(void) {
uint32_t count = 0;
uint16_t do_flash_cmd[] = {0xf06f, 0x037f, 0x7003, 0x7803, 0xf013, 0x0f80, 0xd0fb, 0x4770};
uint8_t status;
if (FTFL->FCNFG & FTFL_FCNFG_RAMRDY) {
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
// FlexRAM is configured as traditional RAM
// We need to reconfigure for EEPROM usage
kinetis_hsrun_disable();
FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command
FTFL->FCCOB3 = 0;
FTFL->FCCOB4 = EEESPLIT | EEESIZE;
FTFL->FCCOB5 = EEPARTITION;
__disable_irq();
// do_flash_cmd() must execute from RAM. Luckily the C syntax is simple...
(*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFL->FSTAT));
__enable_irq();
kinetis_hsrun_enable();
status = FTFL->FSTAT;
if (status & (FTFL_FSTAT_RDCOLERR | FTFL_FSTAT_ACCERR | FTFL_FSTAT_FPVIOL)) {
FTFL->FSTAT = (status & (FTFL_FSTAT_RDCOLERR | FTFL_FSTAT_ACCERR | FTFL_FSTAT_FPVIOL));
return; // error
}
}
// wait for eeprom to become ready (is this really necessary?)
while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) {
if (++count > 200000) break;
}
}
# define FlexRAM ((volatile uint8_t *)0x14000000)
/** \brief eeprom read byte
*
* FIXME: needs doc
*/
uint8_t eeprom_read_byte(const uint8_t *addr) {
uint32_t offset = (uint32_t)addr;
if (offset >= EEPROM_SIZE) return 0;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
return FlexRAM[offset];
}
/** \brief eeprom read word
*
* FIXME: needs doc
*/
uint16_t eeprom_read_word(const uint16_t *addr) {
uint32_t offset = (uint32_t)addr;
if (offset >= EEPROM_SIZE - 1) return 0;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
return *(uint16_t *)(&FlexRAM[offset]);
}
/** \brief eeprom read dword
*
* FIXME: needs doc
*/
uint32_t eeprom_read_dword(const uint32_t *addr) {
uint32_t offset = (uint32_t)addr;
if (offset >= EEPROM_SIZE - 3) return 0;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
return *(uint32_t *)(&FlexRAM[offset]);
}
/** \brief eeprom read block
*
* FIXME: needs doc
*/
void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
uint32_t offset = (uint32_t)addr;
uint8_t *dest = (uint8_t *)buf;
uint32_t end = offset + len;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
if (end > EEPROM_SIZE) end = EEPROM_SIZE;
while (offset < end) {
*dest++ = FlexRAM[offset++];
}
}
/** \brief eeprom is ready
*
* FIXME: needs doc
*/
int eeprom_is_ready(void) { return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0; }
/** \brief flexram wait
*
* FIXME: needs doc
*/
static void flexram_wait(void) {
while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) {
// TODO: timeout
}
}
/** \brief eeprom_write_byte
*
* FIXME: needs doc
*/
void eeprom_write_byte(uint8_t *addr, uint8_t value) {
uint32_t offset = (uint32_t)addr;
if (offset >= EEPROM_SIZE) return;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
if (FlexRAM[offset] != value) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
FlexRAM[offset] = value;
flexram_wait();
kinetis_hsrun_enable();
}
}
/** \brief eeprom write word
*
* FIXME: needs doc
*/
void eeprom_write_word(uint16_t *addr, uint16_t value) {
uint32_t offset = (uint32_t)addr;
if (offset >= EEPROM_SIZE - 1) return;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
# ifdef HANDLE_UNALIGNED_WRITES
if ((offset & 1) == 0) {
# endif
if (*(uint16_t *)(&FlexRAM[offset]) != value) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
*(uint16_t *)(&FlexRAM[offset]) = value;
flexram_wait();
kinetis_hsrun_enable();
}
# ifdef HANDLE_UNALIGNED_WRITES
} else {
if (FlexRAM[offset] != value) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
FlexRAM[offset] = value;
flexram_wait();
kinetis_hsrun_enable();
}
if (FlexRAM[offset + 1] != (value >> 8)) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
FlexRAM[offset + 1] = value >> 8;
flexram_wait();
kinetis_hsrun_enable();
}
}
# endif
}
/** \brief eeprom write dword
*
* FIXME: needs doc
*/
void eeprom_write_dword(uint32_t *addr, uint32_t value) {
uint32_t offset = (uint32_t)addr;
if (offset >= EEPROM_SIZE - 3) return;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
# ifdef HANDLE_UNALIGNED_WRITES
switch (offset & 3) {
case 0:
# endif
if (*(uint32_t *)(&FlexRAM[offset]) != value) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
*(uint32_t *)(&FlexRAM[offset]) = value;
flexram_wait();
kinetis_hsrun_enable();
}
return;
# ifdef HANDLE_UNALIGNED_WRITES
case 2:
if (*(uint16_t *)(&FlexRAM[offset]) != value) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
*(uint16_t *)(&FlexRAM[offset]) = value;
flexram_wait();
kinetis_hsrun_enable();
}
if (*(uint16_t *)(&FlexRAM[offset + 2]) != (value >> 16)) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
*(uint16_t *)(&FlexRAM[offset + 2]) = value >> 16;
flexram_wait();
kinetis_hsrun_enable();
}
return;
default:
if (FlexRAM[offset] != value) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
FlexRAM[offset] = value;
flexram_wait();
kinetis_hsrun_enable();
}
if (*(uint16_t *)(&FlexRAM[offset + 1]) != (value >> 8)) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
*(uint16_t *)(&FlexRAM[offset + 1]) = value >> 8;
flexram_wait();
kinetis_hsrun_enable();
}
if (FlexRAM[offset + 3] != (value >> 24)) {
kinetis_hsrun_disable();
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
FlexRAM[offset + 3] = value >> 24;
flexram_wait();
kinetis_hsrun_enable();
}
}
# endif
}
/** \brief eeprom write block
*
* FIXME: needs doc
*/
void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
uint32_t offset = (uint32_t)addr;
const uint8_t *src = (const uint8_t *)buf;
if (offset >= EEPROM_SIZE) return;
if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
if (len >= EEPROM_SIZE) len = EEPROM_SIZE;
if (offset + len >= EEPROM_SIZE) len = EEPROM_SIZE - offset;
kinetis_hsrun_disable();
while (len > 0) {
uint32_t lsb = offset & 3;
if (lsb == 0 && len >= 4) {
// write aligned 32 bits
uint32_t val32;
val32 = *src++;
val32 |= (*src++ << 8);
val32 |= (*src++ << 16);
val32 |= (*src++ << 24);
if (*(uint32_t *)(&FlexRAM[offset]) != val32) {
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
*(uint32_t *)(&FlexRAM[offset]) = val32;
flexram_wait();
}
offset += 4;
len -= 4;
} else if ((lsb == 0 || lsb == 2) && len >= 2) {
// write aligned 16 bits
uint16_t val16;
val16 = *src++;
val16 |= (*src++ << 8);
if (*(uint16_t *)(&FlexRAM[offset]) != val16) {
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
*(uint16_t *)(&FlexRAM[offset]) = val16;
flexram_wait();
}
offset += 2;
len -= 2;
} else {
// write 8 bits
uint8_t val8 = *src++;
if (FlexRAM[offset] != val8) {
uint8_t stat = FTFL->FSTAT & 0x70;
if (stat) FTFL->FSTAT = stat;
FlexRAM[offset] = val8;
flexram_wait();
}
offset++;
len--;
}
}
kinetis_hsrun_enable();
}
/*
void do_flash_cmd(volatile uint8_t *fstat)
{
*fstat = 0x80;
while ((*fstat & 0x80) == 0) ; // wait
}
00000000 <do_flash_cmd>:
0: f06f 037f mvn.w r3, #127 ; 0x7f
4: 7003 strb r3, [r0, #0]
6: 7803 ldrb r3, [r0, #0]
8: f013 0f80 tst.w r3, #128 ; 0x80
c: d0fb beq.n 6 <do_flash_cmd+0x6>
e: 4770 bx lr
*/
#elif defined(KL2x) /* chip selection */
/* Teensy LC (emulated) */
# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
extern uint32_t __eeprom_workarea_start__;
extern uint32_t __eeprom_workarea_end__;
# define EEPROM_SIZE 128
static uint32_t flashend = 0;
void eeprom_initialize(void) {
const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__);
do {
if (*p++ == 0xFFFF) {
flashend = (uint32_t)(p - 2);
return;
}
} while (p < (uint16_t *)SYMVAL(__eeprom_workarea_end__));
flashend = (uint32_t)(p - 1);
}
uint8_t eeprom_read_byte(const uint8_t *addr) {
uint32_t offset = (uint32_t)addr;
const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__);
const uint16_t *end = (const uint16_t *)((uint32_t)flashend);
uint16_t val;
uint8_t data = 0xFF;
if (!end) {
eeprom_initialize();
end = (const uint16_t *)((uint32_t)flashend);
}
if (offset < EEPROM_SIZE) {
while (p <= end) {
val = *p++;
if ((val & 255) == offset) data = val >> 8;
}
}
return data;
}
static void flash_write(const uint16_t *code, uint32_t addr, uint32_t data) {
// with great power comes great responsibility....
uint32_t stat;
*(uint32_t *)&(FTFA->FCCOB3) = 0x06000000 | (addr & 0x00FFFFFC);
*(uint32_t *)&(FTFA->FCCOB7) = data;
__disable_irq();
(*((void (*)(volatile uint8_t *))((uint32_t)code | 1)))(&(FTFA->FSTAT));
__enable_irq();
stat = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR | FTFA_FSTAT_ACCERR | FTFA_FSTAT_FPVIOL);
if (stat) {
FTFA->FSTAT = stat;
}
MCM->PLACR |= MCM_PLACR_CFCC;
}
void eeprom_write_byte(uint8_t *addr, uint8_t data) {
uint32_t offset = (uint32_t)addr;
const uint16_t *p, *end = (const uint16_t *)((uint32_t)flashend);
uint32_t i, val, flashaddr;
uint16_t do_flash_cmd[] = {0x2380, 0x7003, 0x7803, 0xb25b, 0x2b00, 0xdafb, 0x4770};
uint8_t buf[EEPROM_SIZE];
if (offset >= EEPROM_SIZE) return;
if (!end) {
eeprom_initialize();
end = (const uint16_t *)((uint32_t)flashend);
}
if (++end < (uint16_t *)SYMVAL(__eeprom_workarea_end__)) {
val = (data << 8) | offset;
flashaddr = (uint32_t)end;
flashend = flashaddr;
if ((flashaddr & 2) == 0) {
val |= 0xFFFF0000;
} else {
val <<= 16;
val |= 0x0000FFFF;
}
flash_write(do_flash_cmd, flashaddr, val);
} else {
for (i = 0; i < EEPROM_SIZE; i++) {
buf[i] = 0xFF;
}
val = 0;
for (p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); p < (uint16_t *)SYMVAL(__eeprom_workarea_end__); p++) {
val = *p;
if ((val & 255) < EEPROM_SIZE) {
buf[val & 255] = val >> 8;
}
}
buf[offset] = data;
for (flashaddr = (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); flashaddr < (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_end__); flashaddr += 1024) {
*(uint32_t *)&(FTFA->FCCOB3) = 0x09000000 | flashaddr;
__disable_irq();
(*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFA->FSTAT));
__enable_irq();
val = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR | FTFA_FSTAT_ACCERR | FTFA_FSTAT_FPVIOL);
;
if (val) FTFA->FSTAT = val;
MCM->PLACR |= MCM_PLACR_CFCC;
}
flashaddr = (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__);
for (i = 0; i < EEPROM_SIZE; i++) {
if (buf[i] == 0xFF) continue;
if ((flashaddr & 2) == 0) {
val = (buf[i] << 8) | i;
} else {
val = val | (buf[i] << 24) | (i << 16);
flash_write(do_flash_cmd, flashaddr, val);
}
flashaddr += 2;
}
flashend = flashaddr;
if ((flashaddr & 2)) {
val |= 0xFFFF0000;
flash_write(do_flash_cmd, flashaddr, val);
}
}
}
/*
void do_flash_cmd(volatile uint8_t *fstat)
{
*fstat = 0x80;
while ((*fstat & 0x80) == 0) ; // wait
}
00000000 <do_flash_cmd>:
0: 2380 movs r3, #128 ; 0x80
2: 7003 strb r3, [r0, #0]
4: 7803 ldrb r3, [r0, #0]
6: b25b sxtb r3, r3
8: 2b00 cmp r3, #0
a: dafb bge.n 4 <do_flash_cmd+0x4>
c: 4770 bx lr
*/
uint16_t eeprom_read_word(const uint16_t *addr) {
const uint8_t *p = (const uint8_t *)addr;
return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8);
}
uint32_t eeprom_read_dword(const uint32_t *addr) {
const uint8_t *p = (const uint8_t *)addr;
return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24);
}
void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
const uint8_t *p = (const uint8_t *)addr;
uint8_t * dest = (uint8_t *)buf;
while (len--) {
*dest++ = eeprom_read_byte(p++);
}
}
int eeprom_is_ready(void) { return 1; }
void eeprom_write_word(uint16_t *addr, uint16_t value) {
uint8_t *p = (uint8_t *)addr;
eeprom_write_byte(p++, value);
eeprom_write_byte(p, value >> 8);
}
void eeprom_write_dword(uint32_t *addr, uint32_t value) {
uint8_t *p = (uint8_t *)addr;
eeprom_write_byte(p++, value);
eeprom_write_byte(p++, value >> 8);
eeprom_write_byte(p++, value >> 16);
eeprom_write_byte(p, value >> 24);
}
void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {
eeprom_write_byte(p++, *src++);
}
}
#else
// No EEPROM supported, so emulate it
# ifndef EEPROM_SIZE
# include "eeconfig.h"
# define EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
# endif
__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE];
uint8_t eeprom_read_byte(const uint8_t *addr) {
uint32_t offset = (uint32_t)addr;
return buffer[offset];
}
void eeprom_write_byte(uint8_t *addr, uint8_t value) {
uint32_t offset = (uint32_t)addr;
buffer[offset] = value;
}
uint16_t eeprom_read_word(const uint16_t *addr) {
const uint8_t *p = (const uint8_t *)addr;
return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8);
}
uint32_t eeprom_read_dword(const uint32_t *addr) {
const uint8_t *p = (const uint8_t *)addr;
return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24);
}
void eeprom_read_block(void *buf, const void *addr, size_t len) {
const uint8_t *p = (const uint8_t *)addr;
uint8_t * dest = (uint8_t *)buf;
while (len--) {
*dest++ = eeprom_read_byte(p++);
}
}
void eeprom_write_word(uint16_t *addr, uint16_t value) {
uint8_t *p = (uint8_t *)addr;
eeprom_write_byte(p++, value);
eeprom_write_byte(p, value >> 8);
}
void eeprom_write_dword(uint32_t *addr, uint32_t value) {
uint8_t *p = (uint8_t *)addr;
eeprom_write_byte(p++, value);
eeprom_write_byte(p++, value >> 8);
eeprom_write_byte(p++, value >> 16);
eeprom_write_byte(p, value >> 24);
}
void eeprom_write_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {
eeprom_write_byte(p++, *src++);
}
}
#endif /* chip selection */
// The update functions just calls write for now, but could probably be optimized
void eeprom_update_byte(uint8_t *addr, uint8_t value) { eeprom_write_byte(addr, value); }
void eeprom_update_word(uint16_t *addr, uint16_t value) {
uint8_t *p = (uint8_t *)addr;
eeprom_write_byte(p++, value);
eeprom_write_byte(p, value >> 8);
}
void eeprom_update_dword(uint32_t *addr, uint32_t value) {
uint8_t *p = (uint8_t *)addr;
eeprom_write_byte(p++, value);
eeprom_write_byte(p++, value >> 8);
eeprom_write_byte(p++, value >> 16);
eeprom_write_byte(p, value >> 24);
}
void eeprom_update_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {
eeprom_write_byte(p++, *src++);
}
}