qmk_firmware/drivers/painter/ili9xxx/qp_ili9341.c
Nick Brassel 1f2b1dedcc
Quantum Painter (#10174)
* Install dependencies before executing unit tests.

* Split out UTF-8 decoder.

* Fixup python formatting rules.

* Add documentation for QGF/QFF and the RLE format used.

* Add CLI commands for converting images and fonts.

* Add stub rules.mk for QP.

* Add stream type.

* Add base driver and comms interfaces.

* Add support for SPI, SPI+D/C comms drivers.

* Include <qp.h> when enabled.

* Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789.

* Add support for GC9A01.

* Add support for ILI9341.

* Add support for ILI9163.

* Add support for SSD1351.

* Implement qp_setpixel, including pixdata buffer management.

* Implement qp_line.

* Implement qp_rect.

* Implement qp_circle.

* Implement qp_ellipse.

* Implement palette interpolation.

* Allow for streams to work with either flash or RAM.

* Image loading.

* Font loading.

* QGF palette loading.

* Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images.

* Image drawing.

* Animations.

* Font rendering.

* Check against 256 colours, dump out the loaded palette if debugging enabled.

* Fix build.

* AVR is not the intended audience.

* `qmk format-c`

* Generation fix.

* First batch of docs.

* More docs and examples.

* Review comments.

* Public API documentation.
2022-04-13 18:00:18 +10:00

128 lines
6 KiB
C

// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qp_internal.h"
#include "qp_comms.h"
#include "qp_ili9341.h"
#include "qp_ili9xxx_opcodes.h"
#include "qp_tft_panel.h"
#ifdef QUANTUM_PAINTER_ILI9341_SPI_ENABLE
# include <qp_comms_spi.h>
#endif // QUANTUM_PAINTER_ILI9341_SPI_ENABLE
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Common
// Driver storage
tft_panel_dc_reset_painter_device_t ili9341_drivers[ILI9341_NUM_DEVICES] = {0};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Initialization
bool qp_ili9341_init(painter_device_t device, painter_rotation_t rotation) {
// clang-format off
const uint8_t ili9341_init_sequence[] = {
// Command, Delay, N, Data[N]
ILI9XXX_CMD_RESET, 120, 0,
ILI9XXX_CMD_SLEEP_OFF, 5, 0,
ILI9XXX_POWER_CTL_A, 0, 5, 0x39, 0x2C, 0x00, 0x34, 0x02,
ILI9XXX_POWER_CTL_B, 0, 3, 0x00, 0xD9, 0x30,
ILI9XXX_POWER_ON_SEQ_CTL, 0, 4, 0x64, 0x03, 0x12, 0x81,
ILI9XXX_SET_PUMP_RATIO_CTL, 0, 1, 0x20,
ILI9XXX_SET_POWER_CTL_1, 0, 1, 0x26,
ILI9XXX_SET_POWER_CTL_2, 0, 1, 0x11,
ILI9XXX_SET_VCOM_CTL_1, 0, 2, 0x35, 0x3E,
ILI9XXX_SET_VCOM_CTL_2, 0, 1, 0xBE,
ILI9XXX_DRV_TIMING_CTL_A, 0, 3, 0x85, 0x10, 0x7A,
ILI9XXX_DRV_TIMING_CTL_B, 0, 2, 0x00, 0x00,
ILI9XXX_SET_BRIGHTNESS, 0, 1, 0xFF,
ILI9XXX_ENABLE_3_GAMMA, 0, 1, 0x00,
ILI9XXX_SET_GAMMA, 0, 1, 0x01,
ILI9XXX_SET_PGAMMA, 0, 15, 0x0F, 0x29, 0x24, 0x0C, 0x0E, 0x09, 0x4E, 0x78, 0x3C, 0x09, 0x13, 0x05, 0x17, 0x11, 0x00,
ILI9XXX_SET_NGAMMA, 0, 15, 0x00, 0x16, 0x1B, 0x04, 0x11, 0x07, 0x31, 0x33, 0x42, 0x05, 0x0C, 0x0A, 0x28, 0x2F, 0x0F,
ILI9XXX_SET_PIX_FMT, 0, 1, 0x05,
ILI9XXX_SET_FRAME_CTL_NORMAL, 0, 2, 0x00, 0x1B,
ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x0A, 0xA2,
ILI9XXX_CMD_PARTIAL_OFF, 0, 0,
ILI9XXX_CMD_DISPLAY_ON, 20, 0
};
// clang-format on
qp_comms_bulk_command_sequence(device, ili9341_init_sequence, sizeof(ili9341_init_sequence));
// Configure the rotation (i.e. the ordering and direction of memory writes in GRAM)
const uint8_t madctl[] = {
[QP_ROTATION_0] = ILI9XXX_MADCTL_BGR,
[QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MV,
[QP_ROTATION_180] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MY,
[QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV | ILI9XXX_MADCTL_MY,
};
qp_comms_command_databyte(device, ILI9XXX_SET_MEM_ACS_CTL, madctl[rotation]);
return true;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver vtable
const struct tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable = {
.base =
{
.init = qp_ili9341_init,
.power = qp_tft_panel_power,
.clear = qp_tft_panel_clear,
.flush = qp_tft_panel_flush,
.pixdata = qp_tft_panel_pixdata,
.viewport = qp_tft_panel_viewport,
.palette_convert = qp_tft_panel_palette_convert,
.append_pixels = qp_tft_panel_append_pixels,
},
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
.num_window_bytes = 2,
.swap_window_coords = false,
.opcodes =
{
.display_on = ILI9XXX_CMD_DISPLAY_ON,
.display_off = ILI9XXX_CMD_DISPLAY_OFF,
.set_column_address = ILI9XXX_SET_COL_ADDR,
.set_row_address = ILI9XXX_SET_PAGE_ADDR,
.enable_writes = ILI9XXX_SET_MEM,
},
};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// SPI
#ifdef QUANTUM_PAINTER_ILI9341_SPI_ENABLE
// Factory function for creating a handle to the ILI9341 device
painter_device_t qp_ili9341_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
for (uint32_t i = 0; i < ILI9341_NUM_DEVICES; ++i) {
tft_panel_dc_reset_painter_device_t *driver = &ili9341_drivers[i];
if (!driver->base.driver_vtable) {
driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&ili9341_driver_vtable;
driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
driver->base.native_bits_per_pixel = 16; // RGB565
driver->base.panel_width = panel_width;
driver->base.panel_height = panel_height;
driver->base.rotation = QP_ROTATION_0;
driver->base.offset_x = 0;
driver->base.offset_y = 0;
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
return (painter_device_t)driver;
}
}
return NULL;
}
#endif // QUANTUM_PAINTER_ILI9341_SPI_ENABLE
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////