forked from mirrors/qmk_firmware
d4be07dad3
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read
* Incorporates patches and changes to HID reporting
There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.
The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:
```
bits |0|1|2|3|4|5|6|7|
|*|*|*|*|*|*|*|*| axis 0 (report size 8)
|*|*|*|*|*|*|*|*| ...
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*| axis 6
|*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
|*| | | | | | | | last of 9 buttons, not aligned
```
So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.
Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)
* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.
Fix joystick report id
Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)
Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.
Documentation fixes
* Fix port addressing for joystick analog read
* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat
* avoid float functions to compute range mapping for axis adc reading
* Remove V-USB support for now. Updated docs accordingly.
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios
* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.
* Update tmk_core/protocol/chibios/usb_main.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.
* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add PR corrections
* Remove halconf.h and mcuconf.h from onekey keymaps
* Change ADC_PIN to A0
Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
538 lines
16 KiB
Makefile
538 lines
16 KiB
Makefile
# Copyright 2017 Fred Sundvik
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
SERIAL_PATH := $(QUANTUM_PATH)/serial_link
|
|
|
|
QUANTUM_SRC += \
|
|
$(QUANTUM_DIR)/quantum.c \
|
|
$(QUANTUM_DIR)/keymap_common.c \
|
|
$(QUANTUM_DIR)/keycode_config.c
|
|
|
|
ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
|
|
OPT_DEFS += -DAPI_SYSEX_ENABLE
|
|
OPT_DEFS += -DAPI_ENABLE
|
|
MIDI_ENABLE=yes
|
|
SRC += $(QUANTUM_DIR)/api/api_sysex.c
|
|
SRC += $(QUANTUM_DIR)/api.c
|
|
endif
|
|
|
|
ifeq ($(strip $(AUDIO_ENABLE)), yes)
|
|
OPT_DEFS += -DAUDIO_ENABLE
|
|
MUSIC_ENABLE = yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
|
|
SRC += $(QUANTUM_DIR)/audio/audio_$(PLATFORM_KEY).c
|
|
SRC += $(QUANTUM_DIR)/audio/voices.c
|
|
SRC += $(QUANTUM_DIR)/audio/luts.c
|
|
endif
|
|
|
|
ifeq ($(strip $(MIDI_ENABLE)), yes)
|
|
OPT_DEFS += -DMIDI_ENABLE
|
|
MUSIC_ENABLE = yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
|
|
endif
|
|
|
|
MUSIC_ENABLE ?= no
|
|
ifeq ($(MUSIC_ENABLE), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
|
|
endif
|
|
|
|
ifeq ($(strip $(STENO_ENABLE)), yes)
|
|
OPT_DEFS += -DSTENO_ENABLE
|
|
VIRTSER_ENABLE ?= yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
|
|
endif
|
|
|
|
ifeq ($(strip $(VIRTSER_ENABLE)), yes)
|
|
OPT_DEFS += -DVIRTSER_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
|
|
OPT_DEFS += -DFAUXCLICKY_ENABLE
|
|
SRC += $(QUANTUM_DIR)/fauxclicky.c
|
|
endif
|
|
|
|
ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
|
|
OPT_DEFS += -DPOINTING_DEVICE_ENABLE
|
|
OPT_DEFS += -DMOUSE_ENABLE
|
|
SRC += $(QUANTUM_DIR)/pointing_device.c
|
|
endif
|
|
|
|
VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi
|
|
EEPROM_DRIVER ?= vendor
|
|
ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
|
|
$(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
|
|
else
|
|
OPT_DEFS += -DEEPROM_ENABLE
|
|
ifeq ($(strip $(EEPROM_DRIVER)), custom)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
SRC += eeprom_driver.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
SRC += eeprom_driver.c eeprom_i2c.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), spi)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
QUANTUM_LIB_SRC += spi_master.c
|
|
SRC += eeprom_driver.c eeprom_spi.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), transient)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
SRC += eeprom_driver.c eeprom_transient.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
|
|
OPT_DEFS += -DEEPROM_VENDOR
|
|
ifeq ($(PLATFORM),AVR)
|
|
# Automatically provided by avr-libc, nothing required
|
|
else ifeq ($(PLATFORM),CHIBIOS)
|
|
ifeq ($(MCU_SERIES), STM32F3xx)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
|
|
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
|
|
OPT_DEFS += -DEEPROM_EMU_STM32F303xC
|
|
OPT_DEFS += -DSTM32_EEPROM_ENABLE
|
|
else ifeq ($(MCU_SERIES), STM32F1xx)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
|
|
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
|
|
OPT_DEFS += -DEEPROM_EMU_STM32F103xB
|
|
OPT_DEFS += -DSTM32_EEPROM_ENABLE
|
|
else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
|
|
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
|
|
OPT_DEFS += -DEEPROM_EMU_STM32F072xB
|
|
OPT_DEFS += -DSTM32_EEPROM_ENABLE
|
|
else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
|
|
OPT_DEFS += -DEEPROM_DRIVER
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
|
|
else
|
|
# This will effectively work the same as "transient" if not supported by the chip
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
|
|
endif
|
|
else ifeq ($(PLATFORM),ARM_ATSAM)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
|
|
else ifeq ($(PLATFORM),TEST)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
|
|
POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h
|
|
OPT_DEFS += -DRGBLIGHT_ENABLE
|
|
SRC += $(QUANTUM_DIR)/color.c
|
|
SRC += $(QUANTUM_DIR)/rgblight.c
|
|
CIE1931_CURVE := yes
|
|
RGB_KEYCODES_ENABLE := yes
|
|
ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
|
|
OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
|
|
else
|
|
WS2812_DRIVER_REQUIRED := yes
|
|
endif
|
|
endif
|
|
|
|
VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 WS2812 custom
|
|
|
|
LED_MATRIX_ENABLE ?= no
|
|
ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
|
|
ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
|
|
$(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
|
|
else
|
|
BACKLIGHT_ENABLE = yes
|
|
BACKLIGHT_DRIVER = custom
|
|
OPT_DEFS += -DLED_MATRIX_ENABLE
|
|
SRC += $(QUANTUM_DIR)/led_matrix.c
|
|
SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
|
|
OPT_DEFS += -DIS31FL3731
|
|
COMMON_VPATH += $(DRIVER_PATH)/issi
|
|
SRC += is31fl3731-simple.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
RGB_MATRIX_ENABLE ?= no
|
|
|
|
ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
|
|
ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
|
|
$(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
|
|
endif
|
|
OPT_DEFS += -DRGB_MATRIX_ENABLE
|
|
SRC += $(QUANTUM_DIR)/color.c
|
|
SRC += $(QUANTUM_DIR)/rgb_matrix.c
|
|
SRC += $(QUANTUM_DIR)/rgb_matrix_drivers.c
|
|
CIE1931_CURVE := yes
|
|
RGB_KEYCODES_ENABLE := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
|
|
RGB_MATRIX_ENABLE := IS31FL3731
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
|
|
OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/issi
|
|
SRC += is31fl3731.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
|
|
OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/issi
|
|
SRC += is31fl3733.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
|
|
OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/issi
|
|
SRC += is31fl3737.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3741)
|
|
OPT_DEFS += -DIS31FL3741 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/issi
|
|
SRC += is31fl3741.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
|
|
OPT_DEFS += -DWS2812
|
|
WS2812_DRIVER_REQUIRED := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
|
|
OPT_DEFS += -DRGB_MATRIX_CUSTOM_KB
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_CUSTOM_USER)), yes)
|
|
OPT_DEFS += -DRGB_MATRIX_CUSTOM_USER
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_KEYCODES_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_rgb.c
|
|
endif
|
|
|
|
ifeq ($(strip $(PRINTING_ENABLE)), yes)
|
|
OPT_DEFS += -DPRINTING_ENABLE
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
|
|
SRC += $(TMK_DIR)/protocol/serial_uart.c
|
|
endif
|
|
|
|
ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
|
|
SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c)
|
|
SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
|
|
SERIAL_DEFS += -DSERIAL_LINK_ENABLE
|
|
COMMON_VPATH += $(SERIAL_PATH)
|
|
|
|
SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC))
|
|
OPT_DEFS += $(SERIAL_DEFS)
|
|
VAPTH += $(SERIAL_PATH)
|
|
endif
|
|
|
|
VARIABLE_TRACE ?= no
|
|
ifneq ($(strip $(VARIABLE_TRACE)),no)
|
|
SRC += $(QUANTUM_DIR)/variable_trace.c
|
|
OPT_DEFS += -DNUM_TRACED_VARIABLES=$(strip $(VARIABLE_TRACE))
|
|
ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
|
|
OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(LCD_ENABLE)), yes)
|
|
CIE1931_CURVE := yes
|
|
endif
|
|
|
|
# backward compat
|
|
ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
|
|
BACKLIGHT_DRIVER := custom
|
|
endif
|
|
|
|
VALID_BACKLIGHT_TYPES := pwm software custom
|
|
|
|
BACKLIGHT_ENABLE ?= no
|
|
BACKLIGHT_DRIVER ?= pwm
|
|
ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
|
|
ifeq ($(filter $(BACKLIGHT_DRIVER),$(VALID_BACKLIGHT_TYPES)),)
|
|
$(error BACKLIGHT_DRIVER="$(BACKLIGHT_DRIVER)" is not a valid backlight type)
|
|
endif
|
|
|
|
COMMON_VPATH += $(QUANTUM_DIR)/backlight
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight.c
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
|
|
OPT_DEFS += -DBACKLIGHT_ENABLE
|
|
|
|
ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
|
|
OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
|
|
else
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight_driver_common.c
|
|
ifeq ($(strip $(BACKLIGHT_DRIVER)), pwm)
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight_$(PLATFORM_KEY).c
|
|
else
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight_$(strip $(BACKLIGHT_DRIVER)).c
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c
|
|
|
|
WS2812_DRIVER ?= bitbang
|
|
ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
|
|
ifeq ($(filter $(WS2812_DRIVER),$(VALID_WS2812_DRIVER_TYPES)),)
|
|
$(error WS2812_DRIVER="$(WS2812_DRIVER)" is not a valid WS2812 driver)
|
|
endif
|
|
|
|
OPT_DEFS += -DWS2812_DRIVER_$(strip $(shell echo $(WS2812_DRIVER) | tr '[:lower:]' '[:upper:]'))
|
|
|
|
ifeq ($(strip $(WS2812_DRIVER)), bitbang)
|
|
SRC += ws2812.c
|
|
else
|
|
SRC += ws2812_$(strip $(WS2812_DRIVER)).c
|
|
endif
|
|
|
|
# add extra deps
|
|
ifeq ($(strip $(WS2812_DRIVER)), i2c)
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
|
|
CIE1931_CURVE := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(CIE1931_CURVE)), yes)
|
|
OPT_DEFS += -DUSE_CIE1931_CURVE
|
|
LED_TABLES := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(LED_TABLES)), yes)
|
|
SRC += $(QUANTUM_DIR)/led_tables.c
|
|
endif
|
|
|
|
ifeq ($(strip $(TERMINAL_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
|
|
OPT_DEFS += -DTERMINAL_ENABLE
|
|
OPT_DEFS += -DUSER_PRINT
|
|
endif
|
|
|
|
ifeq ($(strip $(USB_HID_ENABLE)), yes)
|
|
include $(TMK_DIR)/protocol/usb_hid.mk
|
|
endif
|
|
|
|
ifeq ($(strip $(WPM_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/wpm.c
|
|
OPT_DEFS += -DWPM_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(ENCODER_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/encoder.c
|
|
OPT_DEFS += -DENCODER_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(VELOCIKEY_ENABLE)), yes)
|
|
OPT_DEFS += -DVELOCIKEY_ENABLE
|
|
SRC += $(QUANTUM_DIR)/velocikey.c
|
|
endif
|
|
|
|
ifeq ($(strip $(VIA_ENABLE)), yes)
|
|
DYNAMIC_KEYMAP_ENABLE := yes
|
|
RAW_ENABLE := yes
|
|
BOOTMAGIC_ENABLE := lite
|
|
SRC += $(QUANTUM_DIR)/via.c
|
|
OPT_DEFS += -DVIA_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
|
|
OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE
|
|
SRC += $(QUANTUM_DIR)/dynamic_keymap.c
|
|
endif
|
|
|
|
ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes)
|
|
OPT_DEFS += -DDIP_SWITCH_ENABLE
|
|
SRC += $(QUANTUM_DIR)/dip_switch.c
|
|
endif
|
|
|
|
VALID_CUSTOM_MATRIX_TYPES:= yes lite no
|
|
|
|
CUSTOM_MATRIX ?= no
|
|
|
|
ifneq ($(strip $(CUSTOM_MATRIX)), yes)
|
|
ifeq ($(filter $(CUSTOM_MATRIX),$(VALID_CUSTOM_MATRIX_TYPES)),)
|
|
$(error CUSTOM_MATRIX="$(CUSTOM_MATRIX)" is not a valid custom matrix type)
|
|
endif
|
|
|
|
# Include common stuff for all non custom matrix users
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/matrix_common.c
|
|
|
|
# if 'lite' then skip the actual matrix implementation
|
|
ifneq ($(strip $(CUSTOM_MATRIX)), lite)
|
|
# Include the standard or split matrix code if needed
|
|
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
|
|
else
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
|
|
# Debounce Modules. Set DEBOUNCE_TYPE=custom if including one manually.
|
|
DEBOUNCE_TYPE?= sym_g
|
|
ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
|
|
QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
|
|
endif
|
|
|
|
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
|
|
POST_CONFIG_H += $(QUANTUM_DIR)/split_common/post_config.h
|
|
OPT_DEFS += -DSPLIT_KEYBOARD
|
|
|
|
# Include files used by all split keyboards
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_util.c
|
|
|
|
# Determine which (if any) transport files are required
|
|
ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
|
|
# Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
|
|
# Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
|
|
ifeq ($(PLATFORM),AVR)
|
|
QUANTUM_LIB_SRC += i2c_master.c \
|
|
i2c_slave.c
|
|
endif
|
|
|
|
SERIAL_DRIVER ?= bitbang
|
|
ifeq ($(strip $(SERIAL_DRIVER)), bitbang)
|
|
QUANTUM_LIB_SRC += serial.c
|
|
else
|
|
QUANTUM_LIB_SRC += serial_$(strip $(SERIAL_DRIVER)).c
|
|
endif
|
|
endif
|
|
COMMON_VPATH += $(QUANTUM_PATH)/split_common
|
|
endif
|
|
|
|
HAPTIC_ENABLE ?= no
|
|
ifneq ($(strip $(HAPTIC_ENABLE)),no)
|
|
COMMON_VPATH += $(DRIVER_PATH)/haptic
|
|
SRC += haptic.c
|
|
OPT_DEFS += -DHAPTIC_ENABLE
|
|
endif
|
|
|
|
ifneq ($(filter DRV2605L, $(HAPTIC_ENABLE)), )
|
|
SRC += DRV2605L.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
OPT_DEFS += -DDRV2605L
|
|
endif
|
|
|
|
ifneq ($(filter SOLENOID, $(HAPTIC_ENABLE)), )
|
|
SRC += solenoid.c
|
|
OPT_DEFS += -DSOLENOID_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(HD44780_ENABLE)), yes)
|
|
SRC += drivers/avr/hd44780.c
|
|
OPT_DEFS += -DHD44780_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
|
|
OPT_DEFS += -DOLED_DRIVER_ENABLE
|
|
COMMON_VPATH += $(DRIVER_PATH)/oled
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
SRC += oled_driver.c
|
|
endif
|
|
|
|
include $(DRIVER_PATH)/qwiic/qwiic.mk
|
|
|
|
ifeq ($(strip $(UCIS_ENABLE)), yes)
|
|
OPT_DEFS += -DUCIS_ENABLE
|
|
UNICODE_COMMON := yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c
|
|
endif
|
|
|
|
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
|
|
OPT_DEFS += -DUNICODEMAP_ENABLE
|
|
UNICODE_COMMON := yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c
|
|
endif
|
|
|
|
ifeq ($(strip $(UNICODE_ENABLE)), yes)
|
|
OPT_DEFS += -DUNICODE_ENABLE
|
|
UNICODE_COMMON := yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
|
|
endif
|
|
|
|
ifeq ($(strip $(UNICODE_COMMON)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
|
|
endif
|
|
|
|
SPACE_CADET_ENABLE ?= yes
|
|
ifeq ($(strip $(SPACE_CADET_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_space_cadet.c
|
|
OPT_DEFS += -DSPACE_CADET_ENABLE
|
|
endif
|
|
|
|
MAGIC_ENABLE ?= yes
|
|
ifeq ($(strip $(MAGIC_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_magic.c
|
|
OPT_DEFS += -DMAGIC_KEYCODE_ENABLE
|
|
endif
|
|
|
|
GRAVE_ESC_ENABLE ?= yes
|
|
ifeq ($(strip $(GRAVE_ESC_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_grave_esc.c
|
|
OPT_DEFS += -DGRAVE_ESC_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(DYNAMIC_MACRO_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_dynamic_macro.c
|
|
OPT_DEFS += -DDYNAMIC_MACRO_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(COMBO_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_combo.c
|
|
OPT_DEFS += -DCOMBO_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
|
|
OPT_DEFS += -DTAP_DANCE_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(KEY_LOCK_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_key_lock.c
|
|
OPT_DEFS += -DKEY_LOCK_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(LEADER_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_leader.c
|
|
OPT_DEFS += -DLEADER_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_auto_shift.c
|
|
OPT_DEFS += -DAUTO_SHIFT_ENABLE
|
|
ifeq ($(strip $(AUTO_SHIFT_MODIFIERS)), yes)
|
|
OPT_DEFS += -DAUTO_SHIFT_MODIFIERS
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(JOYSTICK_ENABLE)), yes)
|
|
OPT_DEFS += -DJOYSTICK_ENABLE
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_joystick.c
|
|
SRC += $(QUANTUM_DIR)/joystick.c
|
|
SRC += analog.c
|
|
endif
|