qmk_firmware/keyboards/bastardkb/skeletyl/blackpill/mcuconf.h
Charly Delay 50a12c06b9
[keyboard] bastardkb: restructure folder hierarchy (#16778)
* bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus

Upcoming support for the following (adapter, mcu) pairs will be
submitted in follow-up PRs:

- `v2/elitec`
- `v2/stemcell`
- `blackpill`

This PR contains the following changes:

- Move previous implementation to an inner `v1/elitec` folder
- Move keyboard USB IDs and strings to data driven
- Update headers to update maintainers list
- Run `qmk format-c`

* bastardkb/charybdis: remove broken acceleration implementation

* bastardkb/charybdis: fix debug output

* bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair

* bastardkb: add Blackpill support

* bastardkb/charybdis/3x5: add `bstiq` keymap

* bastardkb/charybdis: add fake LEDs to the configuration

For the Charybdis 3x5 (respectively 4x6), the LED config now simulates
36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to
prevent confusion when testing LEDs during assembly when handedness is
not set correctly.  Those fake LEDs are bound to the physical
bottom-left corner.

* bastardkbk/charybdis/readme.md: update build commands

Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield.

* bastardkb/charybdis: fix Via keymap with blackpill

* bastardkb/charybdis: add 3x6 configuration

* bastardkb/charybdis: remove unnecessary files

* bastardkb/charybdis: remove obsolete code

* bastardkb/charybdis/3x6: add Via keymap

* bastardkb: add support for Splinky (RP2040) board

* bastardkb: initial configuration for the Splinky (SPI not working yet)

* bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball

* bastardkb/charybdis/3x6: add splinky config

* bastardkb/*/v2/splinky: update drivers to `vendor`

* bastardkb/dilemma: add new board

* bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps

* bastardkb/dilemma: add `bstiq` keymap

* bastardkb: specify blackpill boards

* bastardkb/charybdis: fix blackpill-specific define syntax

* bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options

* bastardkb: fix `QK_BOOT` keycodes

* bastardkb/dilemma: fix mouse direction on X axis

* bastardkb/charybdis/3x6: adjust CS

* bastardkb/dilemma: adjust trackpad configuration

* charybdis: fix `PWM33XX_CS_PIN` defines

This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613.

* bastardkb: remove Vial mentions from `bstiq` keymaps

* Cleanup unnecessary comments

Co-authored-by: Nathan <nathan.cooke@compass.com>
Co-authored-by: Charly Delay <0xcharly@codesink.dev>
2022-07-25 10:11:28 +01:00

61 lines
1.9 KiB
C

/*
* Copyright 2020 Nick Brassel (tzarc)
* Copyright 2021 Stefan Kerkmann (@KarlK90)
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next <mcuconf.h>
#undef STM32_I2C_USE_I2C1
#define STM32_I2C_USE_I2C1 FALSE
//#undef STM32_I2C_I2C1_RX_DMA_STREAM
//#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
//#undef STM32_I2C_I2C1_TX_DMA_STREAM
//#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#undef STM32_PWM_USE_TIM2
#define STM32_PWM_USE_TIM2 TRUE
//#undef STM32_PWM_USE_TIM3
//#define STM32_PWM_USE_TIM3 TRUE
#undef STM32_SPI_USE_SPI1
#define STM32_SPI_USE_SPI1 TRUE
//#undef STM32_SPI_SPI1_RX_DMA_STREAM
//#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
//#undef STM32_SPI_SPI1_TX_DMA_STREAM
//#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#undef STM32_SERIAL_USE_USART1
#define STM32_SERIAL_USE_USART1 TRUE
//#undef STM32_SERIAL_USE_USART2
//#define STM32_SERIAL_USE_USART2 TRUE
//#undef STM32_UART_USART2_RX_DMA_STREAM
//#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
//#undef STM32_UART_USART2_TX_DMA_STREAM
//#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#undef STM32_GPT_USE_TIM3
#define STM32_GPT_USE_TIM3 TRUE
#undef STM32_ST_USE_TIMER
#define STM32_ST_USE_TIMER 5