qmk_firmware/quantum/sequencer/sequencer.c
James Young c66df16644
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00

275 lines
9.3 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Copyright 2020 Rodolphe Belouin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "sequencer.h"
#ifdef MIDI_ENABLE
# include "process_midi.h"
#endif
#ifdef MIDI_MOCKED
# include "tests/midi_mock.h"
#endif
sequencer_config_t sequencer_config = {
false, // enabled
{false}, // steps
{0}, // track notes
60, // tempo
SQ_RES_4, // resolution
};
sequencer_state_t sequencer_internal_state = {0, 0, 0, 0, SEQUENCER_PHASE_ATTACK};
bool is_sequencer_on(void) { return sequencer_config.enabled; }
void sequencer_on(void) {
dprintln("sequencer on");
sequencer_config.enabled = true;
sequencer_internal_state.current_track = 0;
sequencer_internal_state.current_step = 0;
sequencer_internal_state.timer = timer_read();
sequencer_internal_state.phase = SEQUENCER_PHASE_ATTACK;
}
void sequencer_off(void) {
dprintln("sequencer off");
sequencer_config.enabled = false;
sequencer_internal_state.current_step = 0;
}
void sequencer_toggle(void) {
if (is_sequencer_on()) {
sequencer_off();
} else {
sequencer_on();
}
}
void sequencer_set_track_notes(const uint16_t track_notes[SEQUENCER_TRACKS]) {
for (uint8_t i = 0; i < SEQUENCER_TRACKS; i++) {
sequencer_config.track_notes[i] = track_notes[i];
}
}
bool is_sequencer_track_active(uint8_t track) { return (sequencer_internal_state.active_tracks >> track) & true; }
void sequencer_set_track_activation(uint8_t track, bool value) {
if (value) {
sequencer_internal_state.active_tracks |= (1 << track);
} else {
sequencer_internal_state.active_tracks &= ~(1 << track);
}
dprintf("sequencer: track %d is %s\n", track, value ? "active" : "inactive");
}
void sequencer_toggle_track_activation(uint8_t track) { sequencer_set_track_activation(track, !is_sequencer_track_active(track)); }
void sequencer_toggle_single_active_track(uint8_t track) {
if (is_sequencer_track_active(track)) {
sequencer_internal_state.active_tracks = 0;
} else {
sequencer_internal_state.active_tracks = 1 << track;
}
}
bool is_sequencer_step_on(uint8_t step) { return step < SEQUENCER_STEPS && (sequencer_config.steps[step] & sequencer_internal_state.active_tracks) > 0; }
bool is_sequencer_step_on_for_track(uint8_t step, uint8_t track) { return step < SEQUENCER_STEPS && (sequencer_config.steps[step] >> track) & true; }
void sequencer_set_step(uint8_t step, bool value) {
if (step < SEQUENCER_STEPS) {
if (value) {
sequencer_config.steps[step] |= sequencer_internal_state.active_tracks;
} else {
sequencer_config.steps[step] &= ~sequencer_internal_state.active_tracks;
}
dprintf("sequencer: step %d is %s\n", step, value ? "on" : "off");
} else {
dprintf("sequencer: step %d is out of range\n", step);
}
}
void sequencer_toggle_step(uint8_t step) {
if (is_sequencer_step_on(step)) {
sequencer_set_step_off(step);
} else {
sequencer_set_step_on(step);
}
}
void sequencer_set_all_steps(bool value) {
for (uint8_t step = 0; step < SEQUENCER_STEPS; step++) {
if (value) {
sequencer_config.steps[step] |= sequencer_internal_state.active_tracks;
} else {
sequencer_config.steps[step] &= ~sequencer_internal_state.active_tracks;
}
}
dprintf("sequencer: all steps are %s\n", value ? "on" : "off");
}
uint8_t sequencer_get_tempo(void) { return sequencer_config.tempo; }
void sequencer_set_tempo(uint8_t tempo) {
if (tempo > 0) {
sequencer_config.tempo = tempo;
dprintf("sequencer: tempo set to %d bpm\n", tempo);
} else {
dprintln("sequencer: cannot set tempo to 0");
}
}
void sequencer_increase_tempo(void) {
// Handling potential uint8_t overflow
if (sequencer_config.tempo < UINT8_MAX) {
sequencer_set_tempo(sequencer_config.tempo + 1);
} else {
dprintf("sequencer: cannot set tempo above %d\n", UINT8_MAX);
}
}
void sequencer_decrease_tempo(void) { sequencer_set_tempo(sequencer_config.tempo - 1); }
sequencer_resolution_t sequencer_get_resolution(void) { return sequencer_config.resolution; }
void sequencer_set_resolution(sequencer_resolution_t resolution) {
if (resolution >= 0 && resolution < SEQUENCER_RESOLUTIONS) {
sequencer_config.resolution = resolution;
dprintf("sequencer: resolution set to %d\n", resolution);
} else {
dprintf("sequencer: resolution %d is out of range\n", resolution);
}
}
void sequencer_increase_resolution(void) { sequencer_set_resolution(sequencer_config.resolution + 1); }
void sequencer_decrease_resolution(void) { sequencer_set_resolution(sequencer_config.resolution - 1); }
uint8_t sequencer_get_current_step(void) { return sequencer_internal_state.current_step; }
void sequencer_phase_attack(void) {
dprintf("sequencer: step %d\n", sequencer_internal_state.current_step);
dprintf("sequencer: time %d\n", timer_read());
if (sequencer_internal_state.current_track == 0) {
sequencer_internal_state.timer = timer_read();
}
if (timer_elapsed(sequencer_internal_state.timer) < sequencer_internal_state.current_track * SEQUENCER_TRACK_THROTTLE) {
return;
}
#if defined(MIDI_ENABLE) || defined(MIDI_MOCKED)
if (is_sequencer_step_on_for_track(sequencer_internal_state.current_step, sequencer_internal_state.current_track)) {
process_midi_basic_noteon(midi_compute_note(sequencer_config.track_notes[sequencer_internal_state.current_track]));
}
#endif
if (sequencer_internal_state.current_track < SEQUENCER_TRACKS - 1) {
sequencer_internal_state.current_track++;
} else {
sequencer_internal_state.phase = SEQUENCER_PHASE_RELEASE;
}
}
void sequencer_phase_release(void) {
if (timer_elapsed(sequencer_internal_state.timer) < SEQUENCER_PHASE_RELEASE_TIMEOUT + sequencer_internal_state.current_track * SEQUENCER_TRACK_THROTTLE) {
return;
}
#if defined(MIDI_ENABLE) || defined(MIDI_MOCKED)
if (is_sequencer_step_on_for_track(sequencer_internal_state.current_step, sequencer_internal_state.current_track)) {
process_midi_basic_noteoff(midi_compute_note(sequencer_config.track_notes[sequencer_internal_state.current_track]));
}
#endif
if (sequencer_internal_state.current_track > 0) {
sequencer_internal_state.current_track--;
} else {
sequencer_internal_state.phase = SEQUENCER_PHASE_PAUSE;
}
}
void sequencer_phase_pause(void) {
if (timer_elapsed(sequencer_internal_state.timer) < sequencer_get_step_duration()) {
return;
}
sequencer_internal_state.current_step = (sequencer_internal_state.current_step + 1) % SEQUENCER_STEPS;
sequencer_internal_state.phase = SEQUENCER_PHASE_ATTACK;
}
void matrix_scan_sequencer(void) {
if (!sequencer_config.enabled) {
return;
}
if (sequencer_internal_state.phase == SEQUENCER_PHASE_PAUSE) {
sequencer_phase_pause();
}
if (sequencer_internal_state.phase == SEQUENCER_PHASE_RELEASE) {
sequencer_phase_release();
}
if (sequencer_internal_state.phase == SEQUENCER_PHASE_ATTACK) {
sequencer_phase_attack();
}
}
uint16_t sequencer_get_beat_duration(void) { return get_beat_duration(sequencer_config.tempo); }
uint16_t sequencer_get_step_duration(void) { return get_step_duration(sequencer_config.tempo, sequencer_config.resolution); }
uint16_t get_beat_duration(uint8_t tempo) {
// Dont crash in the unlikely case where the given tempo is 0
if (tempo == 0) {
return get_beat_duration(60);
}
/**
* Given
* t = tempo and d = duration, both strictly greater than 0
* When
* t beats / minute = 1 beat / d ms
* Then
* t beats / 60000ms = 1 beat / d ms
* d ms = 60000ms / t
*/
return 60000 / tempo;
}
uint16_t get_step_duration(uint8_t tempo, sequencer_resolution_t resolution) {
/**
* Resolution cheatsheet:
* 1/2 => 2 steps per 4 beats
* 1/2T => 3 steps per 4 beats
* 1/4 => 4 steps per 4 beats
* 1/4T => 6 steps per 4 beats
* 1/8 => 8 steps per 4 beats
* 1/8T => 12 steps per 4 beats
* 1/16 => 16 steps per 4 beats
* 1/16T => 24 steps per 4 beats
* 1/32 => 32 steps per 4 beats
*
* The number of steps for binary resolutions follows the powers of 2.
* The ternary variants are simply 1.5x faster.
*/
bool is_binary = resolution % 2 == 0;
uint8_t binary_steps = 2 << (resolution / 2);
uint16_t binary_step_duration = get_beat_duration(tempo) * 4 / binary_steps;
return is_binary ? binary_step_duration : 2 * binary_step_duration / 3;
}