darkkirb/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/zykrah/slime88
History
Joel Challis 9a4c307740
Migrate dynamic_keymap.layer_count >= 4 (#22087)
2023-09-20 14:11:33 +01:00
..
keymaps
config.h Migrate dynamic_keymap.layer_count >= 4 (#22087) 2023-09-20 14:11:33 +01:00
info.json Migrate dynamic_keymap.layer_count >= 4 (#22087) 2023-09-20 14:11:33 +01:00
readme.md [Keyboard] Add Slime88 (#19054) 2022-12-14 12:51:02 -08:00
rules.mk Format code according to conventions (#19330) 2022-12-14 20:56:19 +00:00

readme.md

Slime88

Slime88

A Hotswap Multi-layout F13 TKL PCB (h88c compatible) powered by RP2040.

  • Keyboard Maintainer: Zykrah
  • Hardware Supported: Slime88 rev1 PCB
  • Hardware Availability: SLIME88

Make example for this keyboard (after setting up your build environment):

make zykrah/slime88:default

Flashing example for this keyboard:

make zykrah/slime88:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly short the RST and GND pads on the SWD header twice, or short the BOOT header and plug in keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available