History

Joel Challis ccec4867c8 Align `SPLIT_HAND_MATRIX_GRID` left/right logic with `SPLIT_HAND_PIN` (#22775 )		2024-01-09 22:24:53 +11:00
..
keymaps	Make IGNORE_MOD_TAP_INTERRUPT the default behaviour for mod-taps (#20211 )	2023-04-03 15:32:47 +10:00
config.h	Align `SPLIT_HAND_MATRIX_GRID` left/right logic with `SPLIT_HAND_PIN` (#22775 )	2024-01-09 22:24:53 +11:00
info.json	Move split layouts to data driven (#20290 )	2023-04-01 13:09:53 +11:00
pisces.c	Move split layouts to data driven (#20290 )	2023-04-01 13:09:53 +11:00
readme.md
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

pisces

(Less than) 40% Ortholinear split keyboard

Keyboard Maintainer: knaruo
Hardware Supported: pisces PCB, ATmega32U2
Hardware Availability: PCB and Plate

Getting the board into bootloader mode:

To be able to flash firmware onto this board, you'll need to bring the micro controller into bootloader mode. Press the reset button (RSTSW1) on the top side of the PCB to enable the bootloader mode.

Make example for this keyboard (after setting up your build environment):

make pisces:default

Flashing example for this keyboard:

make pisces:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.