qmk_firmware/keyboards/fjlabs/avalon
2024-02-01 18:10:14 +00:00
..
keymaps FJLabs Avalon Layout Additions and Touch-Up (#20620) 2023-04-29 22:52:30 -07:00
config.h Migrate lighting defaults to info.json (#22920) 2024-02-01 18:10:14 +00:00
info.json Migrate lighting defaults to info.json (#22920) 2024-02-01 18:10:14 +00:00
matrix_diagram.md FJLabs Avalon Layout Additions and Touch-Up (#20620) 2023-04-29 22:52:30 -07:00
readme.md FJLabs Avalon Layout Additions and Touch-Up (#20620) 2023-04-29 22:52:30 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

Avalon PCB by FJLaboratories

The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.

Make example for this keyboard (after setting up your build environment):

make fjlabs/avalon:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available