darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/4pplet/perk60_iso
History
Ryan 65a04ead32
LED drivers: update keyboard LED configs (#23073) 
* IS31FL3733: update keyboard LED config

* IS31FL3736: update keyboard LED config

* IS31FL3737: update keyboard LED config

* IS31FL3741: update keyboard LED config

* IS31FL3743A: update keyboard LED config

* AW20216S: update keyboard LED config

* SNLED27351: update keyboard LED config
2024-02-25 21:29:37 +00:00
..
keymaps RESET -> QK_BOOT default keymaps (#17939) 2022-08-07 02:23:58 +01:00
rev_a LED drivers: update keyboard LED configs (#23073) 2024-02-25 21:29:37 +00:00
readme.md [Keyboard] 4pplet Perk60 (#16853) 2022-07-23 13:23:14 -07:00

readme.md

Perk60 ISO Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.