Fix omnikeyish

keyboards/1upkeyboards/1up60hse/1up60hse.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "1up60hse.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/1upkeyboards/super16/super16.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "super16.h"
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}

keyboards/40percentclub/25/25.c

@@ -15,33 +15,6 @@
  */
 #include "25.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/4pack/4pack.c

@@ -15,40 +15,10 @@
  */
 #include "4pack.h"
 
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
 void matrix_init_kb(void) {
   // put your keyboard start-up code here
   // runs once when the firmware starts up
 
   setPinOutput(F4); // cathodes
   setPinOutput(F5); // cathodes
-
-  // Do the rest
-  matrix_init_user();
 }
-
-/*
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/40percentclub/4x4/4x4.c

@@ -1,29 +1,2 @@
 
 #include "4x4.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/5x5/5x5.c

@@ -1,29 +1,2 @@
 
 #include "5x5.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/6lit/6lit.c

@@ -15,33 +15,6 @@
  */
 #include "6lit.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/foobar/foobar.c

@@ -15,33 +15,6 @@
  */
 #include "foobar.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/half_n_half/half_n_half.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "half_n_half.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/i75/i75.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "i75.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/mf68/mf68.c

@@ -1,8 +1 @@
 #include "mf68.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}

keyboards/40percentclub/nano/nano.c

@@ -1,5 +1 @@
 #include "nano.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/40percentclub/nori/nori.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "nori.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/40percentclub/ut47/ut47.c

@@ -15,36 +15,16 @@
  */
 #include "ut47.h"
 #ifdef LED_ENABLE
-  #include "protocol/serial.h"
+    #include "protocol/serial.h"
 #endif
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-  if (record->event.pressed) {
-    #ifdef LED_ENABLE
-      serial_send((record->event.key.row*16)+record->event.key.col);
-    #endif
-  }
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+    if (record->event.pressed) {
+#ifdef LED_ENABLE
+        serial_send((record->event.key.row*16)+record->event.key.col);
+#endif
+    }
+    return true;  
 }

keyboards/6ball/6ball.c

@@ -1,5 +1 @@
 #include "6ball.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/9key/9key.c

@@ -1,5 +1 @@
 #include "9key.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/abstract/ellipse/rev1/rev1.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-/*void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}*/

keyboards/acheron/shark/shark.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "shark.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/acr60/acr60.c

@@ -4,25 +4,12 @@
 void matrix_init_kb(void) {
   // Keyboard start-up code goes here
   // Runs once when the firmware starts up
-  matrix_init_user();
   led_init_ports();
 };
 
-void matrix_scan_kb(void) {
-  // Looping keyboard code goes here
-  // This runs every cycle (a lot)
-  matrix_scan_user();
-};
-
 void led_init_ports(void) {
   // Set caps lock LED pin as output
   DDRB |= (1 << 2);
   // Default to off
   PORTB |= (1 << 2);
 }
-
-void led_set_kb(uint8_t usb_led) {
-  // Code for caps lock LED as reported by the OS
-  // Set this per keymap, instead of globally
-  led_set_user(usb_led);
-}

keyboards/adkb96/rev1/rev1.c

@@ -9,7 +9,5 @@ void matrix_init_kb(void) {
     // // orange led on
     // DDRB |= (1<<0);
     // PORTB &= ~(1<<0);
-
-	matrix_init_user();
 };
 

keyboards/ai03/orbit/matrix.c

@@ -66,15 +66,6 @@ static matrix_row_t raw_matrix[ROWS_PER_HAND];
 uint8_t thisHand, thatHand;
 
 // user-defined overridable functions
-
-__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
-
-__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
-
-__attribute__((weak)) void matrix_init_user(void) {}
-
-__attribute__((weak)) void matrix_scan_user(void) {}
-
 __attribute__((weak)) void matrix_slave_scan_user(void) {}
 
 // helper functions

keyboards/ai03/orbit/orbit.c

@@ -168,22 +168,6 @@ void matrix_init_kb(void) {
 	}
 
 	set_layer_indicators(0);
-	
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
 }
 
 void led_set_kb(uint8_t usb_led) {
@@ -201,7 +185,6 @@ void led_set_kb(uint8_t usb_led) {
 		
 	}
 
-	led_set_user(usb_led);
 }
 
 uint32_t layer_state_set_kb(uint32_t state) {

keyboards/ai03/quasar/quasar.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "quasar.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/ai03/soyuz/soyuz.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "soyuz.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/akb/eb46/eb46.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "eb46.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/al1/al1.c

@@ -15,10 +15,6 @@
  */
 #include "al1.h"
 
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
     CONFIG_LED_IO;
     print_dec(usb_led);

keyboards/alf/dc60/dc60.c

@@ -15,27 +15,6 @@
  */
 #include "dc60.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
 		DDRB |= (1 << 7);
@@ -44,6 +23,4 @@ void led_set_kb(uint8_t usb_led) {
 		DDRB &= ~(1 << 7);
 		PORTB &= ~(1 << 7);
 	}
-
-	led_set_user(usb_led);
 }

keyboards/alf/x11/x11.c

@@ -22,21 +22,6 @@ void matrix_init_kb(void) {
     setPinOutput(C6);
     setPinOutput(E6);
     setPinOutput(C7);
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
 }
 
 void led_set_kb(uint8_t usb_led) {
@@ -59,6 +44,4 @@ void led_set_kb(uint8_t usb_led) {
     } else {
         writePinHigh(C7);
     }
-
-    led_set_user(usb_led);
 }

keyboards/alu84/alu84.c

@@ -29,13 +29,6 @@ void matrix_scan_kb(void) {
 	matrix_scan_user();
 }
 
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 

keyboards/amj40/amj40.c

@@ -4,16 +4,9 @@
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	led_init_ports();
 };
 
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
 void led_init_ports(void) {
     // * Set our LED pins as output
     DDRB |= (1<<2);

keyboards/amj60/amj60.c

@@ -4,16 +4,9 @@
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	led_init_ports();
 };
 
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
 void led_init_ports(void) {
     // * Set our LED pins as output
     DDRB |= (1<<2);

keyboards/amj96/amj96.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "amj96.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/amjkeyboard/amj66/amj66.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "amj66.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/amjpad/amjpad.c

@@ -4,16 +4,9 @@
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	led_init_ports();
 };
 
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
 void led_init_ports(void) {
     // * Set our LED pins as output
     DDRD |= (1<<6);

keyboards/angel17/alpha/alpha.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "alpha.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/angel17/rev1/rev1.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/angel64/alpha/alpha.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "alpha.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/angel64/alpha/matrix.c

@@ -54,22 +54,18 @@ static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
 
 __attribute__ ((weak))
 void matrix_init_quantum(void) {
-    matrix_init_kb();
 }
 
 __attribute__ ((weak))
 void matrix_scan_quantum(void) {
-    matrix_scan_kb();
 }
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/angel64/rev1/matrix.c

@@ -64,12 +64,10 @@ void matrix_scan_quantum(void) {
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/angel64/rev1/rev1.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/atomic/atomic.c

@@ -7,6 +7,4 @@ void matrix_init_kb(void) {
     // Turn status LED on
     DDRE |= (1<<6);
     PORTE |= (1<<6);
-
-    matrix_init_user();
 }

keyboards/baguette/baguette.c

@@ -46,26 +46,4 @@ void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 	bootmagic_lite();
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
 }

keyboards/bm16a/bm16a.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "bm16a.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/bm43a/bm43a.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "bm43a.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/bm60rgb/bm60rgb.c

@@ -15,33 +15,6 @@
  */
 #include "bm60rgb.h"
 
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    led_set_user(usb_led);
-}
-
 led_config_t g_led_config = { {
   {   0,   1,   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13 },
   {  14,  15,  16,  17,  18,  19,  20,  21,  22,  23,  24,  25,  26,  27 },

keyboards/boston_meetup/2019/2019.c

@@ -152,7 +152,7 @@ void draw_ui(void) {
   send_buffer();
 }
 
-void led_set_user(uint8_t usb_led) {
+void led_set_kb(uint8_t usb_led) {
     if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
       if (led_numlock == false){led_numlock = true;}
     } else {
@@ -177,11 +177,6 @@ uint32_t layer_state_set_kb(uint32_t state) {
   return state;
 }
 
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  queue_for_send = true;
-  return process_record_user(keycode, record);
-}
-
 void encoder_update_kb(uint8_t index, bool clockwise) {
   encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64;
   queue_for_send = true;
@@ -191,7 +186,6 @@ void encoder_update_kb(uint8_t index, bool clockwise) {
 
 void matrix_init_kb(void) {
   queue_for_send = true;
-	matrix_init_user();
 }
 
 void matrix_scan_kb(void) {
@@ -211,5 +205,4 @@ if (queue_for_send) {
   }
   counterst = (counterst + 1) % 1024;
   //rgblight_task();
-	matrix_scan_user();
 }

keyboards/bpiphany/frosty_flake/frosty_flake.c

@@ -1,26 +1,5 @@
 #include "frosty_flake.h"
 
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
     DDRB |= (1<<7);
     DDRC |= (1<<5) | (1<<6);
@@ -41,23 +20,4 @@ void led_set_kb(uint8_t usb_led) {
         PORTC &= ~(1<<6);
     else
         PORTC |=  (1<<6);
-
-    led_set_user(usb_led);
 }
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}

keyboards/bpiphany/frosty_flake/matrix.c

@@ -34,12 +34,10 @@ static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/bpiphany/kitten_paw/kitten_paw.c

@@ -1,34 +1,5 @@
 #include "kitten_paw.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
     CONFIG_LED_IO;
@@ -47,5 +18,4 @@ void led_set_kb(uint8_t usb_led) {
         USB_LED_SCROLL_LOCK_ON;
     else
         USB_LED_SCROLL_LOCK_OFF;
-	led_set_user(usb_led);
 }

keyboards/bpiphany/kitten_paw/matrix.c

@@ -37,12 +37,10 @@ static void select_col(uint8_t col);
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/bpiphany/pegasushoof/2013/2013.c

@@ -23,37 +23,3 @@ extern inline void ph_caps_led_off(void);
 
 extern inline void ph_sclk_led_on(void);
 extern inline void ph_sclk_led_off(void);
-
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_action_user(keyrecord_t *record) {
-    return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	matrix_scan_user();
-}
-
-bool process_action_kb(keyrecord_t *record) {
-	return process_action_user(record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	led_set_user(usb_led);
-}

keyboards/bpiphany/pegasushoof/2013/matrix.c

@@ -35,12 +35,10 @@ static void select_row(uint8_t col);
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/bpiphany/pegasushoof/2015/2015.c

@@ -42,17 +42,7 @@ void led_set_user(uint8_t usb_led) {
 }
 
 void matrix_init_kb(void) {
-	matrix_init_user();
 }
 
 void matrix_scan_kb(void) {
-	matrix_scan_user();
-}
-
-bool process_action_kb(keyrecord_t *record) {
-	return process_action_user(record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	led_set_user(usb_led);
 }

keyboards/bpiphany/sixshooter/sixshooter.c

@@ -16,23 +16,3 @@ extern inline void sixshooter_led_5_off(void);
 
 extern inline void sixshooter_led_all_on(void);
 extern inline void sixshooter_led_all_off(void);
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/bpiphany/tiger_lily/matrix.c

@@ -34,12 +34,10 @@ static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/bpiphany/tiger_lily/tiger_lily.c

@@ -1,26 +1,5 @@
 #include "tiger_lily.h"
 
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
     DDRB |= (1<<7);
     DDRC |= (1<<5) | (1<<6);
@@ -41,23 +20,4 @@ void led_set_kb(uint8_t usb_led) {
         PORTC &= ~(1<<6);
     else
         PORTC |=  (1<<6);
-
-    led_set_user(usb_led);
 }
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}

keyboards/bpiphany/unloved_bastard/matrix.c

@@ -27,12 +27,10 @@
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/bpiphany/unloved_bastard/unloved_bastard.c

@@ -19,20 +19,6 @@ void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 	led_init_ports();
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-    return process_record_user(keycode, record);
 }
 
 // C5 left
@@ -65,6 +51,4 @@ void led_set_kb(uint8_t usb_led) {
         PORTC &= ~(1<<6);
     else
         PORTC |=  (1<<6);
-
-    led_set_user(usb_led);
 }

keyboards/bthlabs/geekpad/geekpad.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "geekpad.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    led_set_user(usb_led);
-}

keyboards/business_card/alpha/alpha.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "alpha.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/business_card/beta/beta.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "beta.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/business_card/business_card.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "business_card.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/butterstick/butterstick.c

@@ -14,43 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "butterstick.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-*/
-
-void matrix_scan_kb(void) {
-#ifdef DEBUG_MATRIX
-    for (uint8_t c = 0; c < MATRIX_COLS; c++)
-		for (uint8_t r = 0; r < MATRIX_ROWS; r++)
-		  if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c);
-#endif
-
-  matrix_scan_user();
-}
-
-/*
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/candybar/candybar.c

@@ -15,7 +15,3 @@
  */
 
 #include "candybar.h"
-
-void matrix_init_kb(void) {
-  matrix_init_user();
-}

keyboards/cannonkeys/satisfaction75/satisfaction75.c

@@ -291,7 +291,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
       break;
   }
 
-  return process_record_user(keycode, record);
+  return true;
 }
 
 
@@ -371,7 +371,6 @@ void matrix_init_kb(void)
   rtcGetTime(&RTCD1, &last_timespec);
   queue_for_send = true;
   backlight_init_ports();
-  matrix_init_user();
 }
 
 
@@ -446,4 +445,4 @@ void via_eeprom_reset(void)
     eeconfig_disable();
 }
 
-#endif // VIA_ENABLE
+#endif // VIA_ENABLE

keyboards/cannonkeys/stm32f072/keyboard.c

@@ -74,7 +74,6 @@ void matrix_scan_kb(void)
   #ifdef RGBLIGHT_ENABLE
     rgblight_task();
   #endif
-    matrix_scan_user();
 }
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
@@ -123,7 +122,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
         break;
   }
 
-  return process_record_user(keycode, record);;
+  return true;
 }
 
 #ifdef VIA_ENABLE

keyboards/centromere/centromere.c

@@ -31,7 +31,6 @@ void led_init(void) {
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	uart_init();
 	led_init();
 }

keyboards/centromere/matrix.c

@@ -50,12 +50,10 @@ static matrix_row_t matrix[MATRIX_ROWS];
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/chimera_ergo/chimera_ergo.c

@@ -15,17 +15,6 @@ void led_init(void) {
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	uart_init();
 	led_init();
 }
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-
-}

keyboards/chimera_ergo/matrix.c

@@ -59,12 +59,10 @@ void matrix_scan_quantum(void) {
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/chimera_ls/chimera_ls.c

@@ -15,17 +15,6 @@ void led_init(void) {
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	uart_init();
 	led_init();
 }
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-
-}

keyboards/chimera_ls/matrix.c

@@ -64,12 +64,10 @@ void matrix_scan_quantum(void) {
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/chimera_ortho/chimera_ortho.c

@@ -15,17 +15,6 @@ void led_init(void) {
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	uart_init();
 	led_init();
 }
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-
-}

keyboards/chimera_ortho/matrix.c

@@ -49,12 +49,10 @@ static matrix_row_t matrix[MATRIX_ROWS];
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/choco60/choco60.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "choco60.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/christmas_tree/christmas_tree.c

@@ -1,5 +1 @@
 #include "christmas_tree.h"
-
-void matrix_init_kb(void) {
-	matrix_init_user();
-}

keyboards/ckeys/handwire_101/handwire_101.c

@@ -1,28 +1 @@
 #include "handwire_101.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	// Turn status LED on
-	//DDRD |= (1<<6);
-	//PORTD |= (1<<6);
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-	led_set_user(usb_led);
-}

keyboards/ckeys/nakey/nakey.c

@@ -13,30 +13,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "nakey.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/ckeys/obelus/obelus.c

@@ -6,23 +6,4 @@ void matrix_init_kb(void) {
 	// Turn status LED on
 	DDRD |= (1<<6);
 	PORTD |= (1<<6);
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-	led_set_user(usb_led);
 }

keyboards/ckeys/thedora/thedora.c

@@ -1,28 +1 @@
 #include "thedora.h"
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-  // Turn status LED on
-  //DDRD |= (1<<6);
-  //PORTD |= (1<<6);
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  led_set_user(usb_led);
-}

keyboards/claw44/claw44.c

@@ -2,9 +2,14 @@
 #include "ssd1306.h"
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    /* FIXME(skullydazed):
+     *     Originally this code always ran no matter what process_record_user() did.
+     *     With this PR it will only run if process_record_user() returns true. We
+     *     should think through the implications here.
+     */
 #ifdef SSD1306OLED
-  return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+  return process_record_gfx(keycode,record);
 #else
-  return process_record_user(keycode, record);
+  return true;
 #endif
 }

keyboards/claw44/rev1/matrix.c

@@ -65,12 +65,10 @@ static uint8_t matrix_master_scan(void);
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/clueboard/17/17.c

@@ -2,16 +2,6 @@
 
 int pwm_level;
 
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-    matrix_init_user();
-};
-
-void led_set_kb(uint8_t usb_led) {
-    print("led_set\n");
-}
-
 void backlight_init_ports(void) {
     // Set C7 to output
     DDRC |= (1<<7);

keyboards/clueboard/2x1800/2x1800.c

@@ -20,17 +20,6 @@ void matrix_init_kb(void) {
 	DDRB |= (1<<4);  // Numlock
 	DDRB |= (1<<5);  // Capslock
 	DDRB |= (1<<6);  // Scroll Lock
-
-	// Run the keymap level init
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	return process_record_user(keycode, record);
 }
 
 void led_set_kb(uint8_t usb_led) {

keyboards/clueboard/60/60.c

@@ -14,11 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "60.h"
-
-void matrix_init_kb(void) {
-
-}
-
-void matrix_scan_kb(void) {
-
-}

keyboards/clueboard/66/rev2/rev2.c

@@ -6,15 +6,9 @@
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	led_init_ports();
 }
 
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output

keyboards/clueboard/66/rev3/rev3.c

@@ -6,15 +6,9 @@
 void matrix_init_kb(void) {
     // put your keyboard start-up code here
     // runs once when the firmware starts up
-    matrix_init_user();
     led_init_ports();
 }
 
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output

keyboards/clueboard/66/rev4/rev4.c

@@ -4,14 +4,9 @@
 void matrix_init_kb(void) {
     // put your keyboard start-up code here
     // runs once when the firmware starts up
-    matrix_init_user();
     led_init_ports();
 }
 
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output

keyboards/clueboard/66_hotswap/gen1/matrix.c

@@ -28,12 +28,10 @@ void matrix_scan_user(void) {}
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-  matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-  matrix_scan_user();
 }
 
 void matrix_init(void) {

keyboards/clueboard/66_hotswap/prototype/prototype.c

@@ -6,15 +6,9 @@
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
-	matrix_init_user();
 	led_init_ports();
 }
 
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
 void backlight_init_ports(void) {
     print("init_backlight_pin()\n");
     // Set our LED pins as output

keyboards/clueboard/card/card.c

@@ -3,33 +3,6 @@
 #define BL_GREEN OCR1A
 #define BL_BLUE OCR1C
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
 void backlight_init_ports(void)
 {
 	// Set B5, B6, and B7 as output

keyboards/cocoa40/cocoa40.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "cocoa40.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/comet46/comet46.c

@@ -5,18 +5,5 @@ void uart_init(void) {
 }
 
 void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
 	uart_init();
 }
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-
-}

keyboards/comet46/matrix.c

@@ -49,12 +49,10 @@ static matrix_row_t matrix[MATRIX_ROWS];
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/converter/adb_usb/matrix.c

@@ -40,12 +40,10 @@ static void register_key(uint8_t key);
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/converter/hp_46010a/matrix.c

@@ -62,12 +62,10 @@ void matrix_scan_quantum(void) {
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {    
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))
@@ -241,4 +239,4 @@ uint8_t matrix_cols(void) {
 // the online ducmentation starting from : 
 // https://docs.qmk.fm/#/config_options
 // https://docs.qmk.fm/#/understanding_qmk
-// and probably a few i forgot....
+// and probably a few i forgot....

keyboards/converter/ibm_5291/matrix.c

@@ -196,12 +196,10 @@ void matrix_scan_quantum(void) {
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {    
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))

keyboards/converter/m0110_usb/matrix.c

@@ -49,12 +49,10 @@ static void register_key(uint8_t key);
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
-    matrix_init_user();
 }
 
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
-    matrix_scan_user();
 }
 
 __attribute__ ((weak))
@@ -118,4 +116,4 @@ static void register_key(uint8_t key)
     } else {
         matrix[ROW(key)] |=  (1<<COL(key));
     }
-}
+}

keyboards/converter/modelm101/modelm101.c

@@ -25,27 +25,6 @@ void keyboard_pre_init_kb(void) {
   writePinHigh(B6);
 }
 
-void matrix_init_kb(void) {
-  /* put your keyboard start-up code here
-   * runs once when the firmware starts up */
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  /* put your looping keyboard code here
-   * runs every cycle (a lot) */
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  /* put your per-action keyboard code here
-   * runs for every action, just before processing by the firmware */
-
-  return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
   if (usb_led & (1<<USB_LED_NUM_LOCK)) {
     writePinLow(B4);
@@ -62,6 +41,4 @@ void led_set_kb(uint8_t usb_led) {
   } else {
     writePinHigh(B5);
   }
-
-  led_set_user(usb_led);
 }

keyboards/converter/numeric_keypad_IIe/numeric_keypad_IIe.c

@@ -14,30 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "numeric_keypad_IIe.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}