This commit is contained in:
milestogo 2017-03-08 15:50:46 -08:00
commit ffb04bad66
140 changed files with 5133 additions and 1997 deletions

View file

@ -161,18 +161,26 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/audio/luts.c SRC += $(QUANTUM_DIR)/audio/luts.c
endif endif
ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
OPT_DEFS += -DFAUXCLICKY_ENABLE
SRC += $(QUANTUM_DIR)/fauxclicky.c
endif
ifeq ($(strip $(UCIS_ENABLE)), yes) ifeq ($(strip $(UCIS_ENABLE)), yes)
OPT_DEFS += -DUCIS_ENABLE OPT_DEFS += -DUCIS_ENABLE
UNICODE_ENABLE = yes SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c
endif endif
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes) ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
OPT_DEFS += -DUNICODEMAP_ENABLE OPT_DEFS += -DUNICODEMAP_ENABLE
UNICODE_ENABLE = yes SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c
endif endif
ifeq ($(strip $(UNICODE_ENABLE)), yes) ifeq ($(strip $(UNICODE_ENABLE)), yes)
OPT_DEFS += -DUNICODE_ENABLE OPT_DEFS += -DUNICODE_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
endif endif

View file

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 110 KiB

View file

@ -0,0 +1,15 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Caps Fn Layout
This is the default layout except that Caps Lock acts like Caps Lock when
tapped but Fn when held.

View file

@ -1,7 +1,8 @@
#include "clueboard.h" #include "clueboard.h"
// Used for SHIFT_ESC // Helpful defines
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) #define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below. // Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name. // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@ -9,21 +10,10 @@
// entirely and just use numbers. // entirely and just use numbers.
#define _BL 0 #define _BL 0
#define _FL 1 #define _FL 1
#define _RS 2 #define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer /* Keymap _BL: Base Layer (Default Layer)
* ,--------------------------------------------------------------------------. ,----.
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
* |--------------------------------------------------------------------------| |----|
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
* |--------------------------------------------------------------------------| `----'
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
* |-----------------------------------------------------------------------------.
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
* |------------------------------------------------------------------------|----|----.
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
* `----------------------------------------------------------------------------------'
*/ */
[_BL] = KEYMAP( [_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
@ -33,61 +23,44 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer /* Keymap _FL: Function Layer
* ,--------------------------------------------------------------------------. ,----.
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
* |--------------------------------------------------------------------------| |----|
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | |PGUP|
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL|HOME|PGDN| END|
* `----------------------------------------------------------------------------------'
*/ */
[_FL] = KEYMAP( [_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _RS: Reset layer /* Keymap _CL: Control layer
* ,--------------------------------------------------------------------------. ,----.
* | | | | | | | | | | | | | | | | | |
* |--------------------------------------------------------------------------| |----|
* | | | | |RESET| | | | | | | | | | | |
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL| | | |
* `----------------------------------------------------------------------------------'
*/ */
[_RS] = KEYMAP( [_CL] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
enum function_id {
SHIFT_ESC,
}; };
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = { const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC), [0] = ACTION_FUNCTION(0), // Calls action_function()
}; };
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask; static uint8_t mods_pressed;
switch (id) { switch (id) {
case SHIFT_ESC: case 0:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; /* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) { if (record->event.pressed) {
if (shift_esc_shift_mask) { /* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV); add_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {
@ -95,7 +68,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
send_keyboard_report(); send_keyboard_report();
} }
} else { } else {
if (shift_esc_shift_mask) { /* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV); del_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {

Binary file not shown.

After

Width:  |  Height:  |  Size: 110 KiB

View file

@ -0,0 +1,17 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout
This is the default layout that comes flashed on every Clueboard. For the most
part it's a straightforward and easy to follow layout. The only unusual key is
the key in the upper left, which sends Escape normally, but Grave when any of
the Ctrl, Alt, or GUI modifiers are held down.

View file

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 105 KiB

View file

@ -0,0 +1,15 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout for Mac
This is the default Clueboard layout with Alt and GUI switched to match Mac
conventions.

View file

@ -1,49 +0,0 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Build Options
# change to "no" to disable the options, or define them in the makefile.mk in
# the appropriate keymap folder that will get included automatically
#
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -1,85 +0,0 @@
#include "clueboard.h"
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _RS 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer
* ,--------------------------------------------------------------------------. ,----.
* | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp|
* |--------------------------------------------------------------------------| |----|
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn|
* |--------------------------------------------------------------------------| `----'
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
* |-----------------------------------------------------------------------------.
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up|
* |------------------------------------------------------------------------|----|----.
* | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght|
* `----------------------------------------------------------------------------------'
*/
[_BL] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
* ,--------------------------------------------------------------------------. ,----.
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
* |--------------------------------------------------------------------------| |----|
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | |PGUP|
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL|HOME|PGDN| END|
* `----------------------------------------------------------------------------------'
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END),
/* Keymap _RS: Reset/Underlight layer
* ,--------------------------------------------------------------------------. ,----.
* | | | | | | | | | | | | | | | | | |
* |--------------------------------------------------------------------------| |----|
* | | | | |RESET| | | | | | | | | | | |
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL| | | |
* `----------------------------------------------------------------------------------'
*/
[_RS] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI),
};
/*enum function_id {
};*/
const uint16_t PROGMEM fn_actions[] = {
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
}
}

View file

@ -0,0 +1,47 @@
#include "clueboard.h"
// Helpful defines
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, \
_______, _______, _______,_______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Reset/Underlight layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
const uint16_t PROGMEM fn_actions[] = {
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
};

Binary file not shown.

After

Width:  |  Height:  |  Size: 109 KiB

View file

@ -0,0 +1,14 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Maximised Clueboard Layout
This layout is intended for a board with one or both shifts split. The outside key on the split shift is an Fn, while the inside is shift. The bottom row has all the mods on both sides, optimised for a Mac.

View file

@ -0,0 +1 @@
MOUSEKEY_ENABLE = yes

View file

@ -0,0 +1,93 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
#define _ML 3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
/* Keymap _ML: Mouse layer
*/
[_ML] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \
_______, _______, KC_BTN3,KC_BTN2,KC_BTN1,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MS_U, \
_______, _______, _______,_______, LT(_ML, KC_SPC),LT(_ML, KC_SPC), _______, KC_BTN1, KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 140 KiB

View file

@ -0,0 +1,16 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# MouseKeys Layout
This layout adds a mouse layer. When you hold down the spacebar the arrow keys
will move your mouse cursor. You can click using the 3 mods to the left of the
arrow keys, or the 3 keys under your primary fingers on the home row.

View file

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
S(KC_GRV), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_GRV), KC_DEL, BL_STEP, \
S(KC_TAB), S(KC_Q), S(KC_W),S(KC_E),S(KC_R),S(KC_T), S(KC_Y), S(KC_U),S(KC_I),S(KC_O), S(KC_P), S(KC_LBRC),S(KC_RBRC),S(KC_BSLS), S(KC_PGDN), \
S(KC_LCTL),S(KC_A), MO(_CL),S(KC_D),S(KC_F),S(KC_G), S(KC_H), S(KC_J),S(KC_K),S(KC_L), S(KC_SCLN),S(KC_QUOT),S(KC_NUHS),S(KC_ENT), \
MO(_FL), S(KC_NUBS),S(KC_Z),S(KC_X),S(KC_C),S(KC_V), S(KC_B), S(KC_N),S(KC_M),S(KC_COMM),S(KC_DOT), S(KC_SLSH),S(KC_RO), KC_RSFT, KC_PGUP, \
KC_LCTL, KC_LALT, KC_LGUI,MO(_FL), S(KC_SPC),S(KC_SPC), MO(_FL), KC_RGUI, KC_RALT, KC_RCTL, KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 105 KiB

View file

@ -0,0 +1,17 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Shift Fn Clueboard Layout
This is an experimental layout. It makes the left shift key a dual roll key.
For most keys it acts as a shift key, but for some keys it activates an
alternate function instead. Primarily I use this to access the F-keys under
the number rows.

View file

@ -1,7 +1,8 @@
#include "clueboard.h" #include "clueboard.h"
// Used for SHIFT_ESC // Helpful defines
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) #define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below. // Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name. // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@ -9,21 +10,10 @@
// entirely and just use numbers. // entirely and just use numbers.
#define _BL 0 #define _BL 0
#define _FL 1 #define _FL 1
#define _RS 2 #define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: (Base Layer) Default Layer /* Keymap _BL: Base Layer (Default Layer)
* ,--------------------------------------------------------------------------. ,----.
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
* |--------------------------------------------------------------------------| |----|
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
* |--------------------------------------------------------------------------| `----'
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
* |-----------------------------------------------------------------------------.
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
* |------------------------------------------------------------------------|----|----.
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
* `----------------------------------------------------------------------------------'
*/ */
[_BL] = KEYMAP( [_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
@ -33,61 +23,41 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer /* Keymap _FL: Function Layer
* ,--------------------------------------------------------------------------. ,----.
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
* |--------------------------------------------------------------------------| |----|
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | |PGUP|
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL|HOME|PGDN| END|
* `----------------------------------------------------------------------------------'
*/ */
[_FL] = KEYMAP( [_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, BL_STEP, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \
KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END), _______,_______,_______,MO(_FL), _______,_______, MO(_FL),_______,_______,MO(_FL),KC_HOME,KC_PGDN,KC_END),
/* Keymap _RS: Reset layer /* Keymap _CL: Control layer
* ,--------------------------------------------------------------------------. ,----.
* | | | | | | | | | | | | | | | | | |
* |--------------------------------------------------------------------------| |----|
* | | | | |RESET| | | | | | | | | | | |
* |--------------------------------------------------------------------------| `----'
* | | | _RS| | | | | | | | | | | |
* |-----------------------------------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------------------------------------------------------------------------|----|----.
* | | | | | | | | | | _FL| | | |
* `----------------------------------------------------------------------------------'
*/ */
[_RS] = KEYMAP( [_CL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS), _______,_______,_______,_______, _______,_______, _______,_______,_______,MO(_FL),_______, _______, _______),
};
enum function_id {
SHIFT_ESC,
}; };
const uint16_t PROGMEM fn_actions[] = { const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(SHIFT_ESC), [0] = ACTION_FUNCTION(0),
}; };
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t shift_esc_shift_mask; static uint8_t mods_pressed;
switch (id) { switch (id) {
case SHIFT_ESC: case 0:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; /* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) { if (record->event.pressed) {
if (shift_esc_shift_mask) { /* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV); add_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {
@ -95,7 +65,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
send_keyboard_report(); send_keyboard_report();
} }
} else { } else {
if (shift_esc_shift_mask) { /* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV); del_key(KC_GRV);
send_keyboard_report(); send_keyboard_report();
} else { } else {

Binary file not shown.

After

Width:  |  Height:  |  Size: 109 KiB

View file

@ -1,3 +1,14 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# skullY's Clueboard Layout # skullY's Clueboard Layout
This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing. This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing.

View file

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_INS, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_DEL, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 109 KiB

View file

@ -0,0 +1,15 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout
This is the default layout except that Caps Lock has been changed to Control
and Insert and Delete have been put into the Fn layer.

View file

@ -0,0 +1,83 @@
#include "clueboard.h"
// Helpful defines
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BL 0
#define _FL 1
#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
*/
[_FL] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
/* Keymap _CL: Control layer
*/
[_CL] = KEYMAP(
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
/* This is a list of user defined functions. F(N) corresponds to item N
of this list.
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t mods_pressed;
switch (id) {
case 0:
/* Handle the combined Grave/Esc key
*/
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
if (record->event.pressed) {
/* The key is being pressed.
*/
if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
/* The key is being released.
*/
if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 108 KiB

View file

@ -0,0 +1,17 @@
```
___ _____ _ _ _ __ __ _ __
|__ \ / ____| | | | | | / / / /(_) / /
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
```
![Clueboard Layout Image](layout.png)
# Default Clueboard Layout
This is the default layout that comes flashed on every Clueboard. For the most
part it's a straightforward and easy to follow layout. The only unusual key is
the key in the upper left, which sends Escape normally, but Grave when any of
the Ctrl, Alt, or GUI modifiers are held down.

View file

@ -90,14 +90,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400) CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
AUDIO_ENABLE ?= no AUDIO_ENABLE ?= no
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality
MIDI_ENABLE ?= no # MIDI controls MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID

View file

@ -312,6 +312,8 @@ uint16_t hex_to_keycode(uint8_t hex)
return NEO_E; return NEO_E;
case 0xF: case 0xF:
return NEO_F; return NEO_F;
default:
return KC_NO;
} }
} }
} }

View file

@ -0,0 +1 @@
TAP_DANCE_ENABLE = no

Binary file not shown.

After

Width:  |  Height:  |  Size: 294 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 230 KiB

View file

@ -0,0 +1,256 @@
#include "ergodox.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Basic layer
* MEH: Alt+Control+Shift
* HYPER: Alt+Control+Shift+Gui
* ,--------------------------------------------------. ,--------------------------------------------------.
* | ` ~ | 1 ! | 2 @ | 3 # | 4 $ | 5 % | 6 ^ | | 7 & | 8 * | 9 ( | 0 ) | - _ | = + | Backsp |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | TAB | Q | W | F | P | G |TG(3) | |TG(4) | J | L | U | Y | ; : | ' " |
* |--------+------+------+------+------+------|F-lck | |N-lck |------+------+------+------+------+--------|
* | CAPS | A | R | S | T | D |------| |------| H | N | E | I | O | ENT |
* |--------+------+------+------+------+------| MEH | | MEH |------+------+------+------+------+--------|
* | Shift | Z | X | C | V | B | | | | K | M | , < | . > | UP | Shift |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | LCTL | LCTL | LGUI | LALT | LGUI | | RALT | RCTL | LEFT | DOWN | RIGHT|
* `----------------------------------' `----------------------------------'
* ,--------------. ,--------------.
* | Esc | App | | Ins | Del |
* ,------|------|-------| |------+-------+------.
* | | | Home | | PgUp | | |
* | MO(2)| MO(4)|-------| |------| Space |Space |
* |symbol|N-Lock| End | | PgDn | | |
* `---------------------' `---------------------'
*/
[0] = KEYMAP( // layer 0 : default
// left hand
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(3),
KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MEH,
KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI,
KC_ESC, KC_APP,
KC_HOME,
MO(2), MO(4), KC_END,
// right hand
KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
TG(4), KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_QUOT,
KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT,
KC_MEH, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSFT,
KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT,
KC_INS, KC_DEL,
KC_PGUP,
KC_PGDN, KC_SPC, KC_SPC
),
/* Keymap 1: QWERTY layer (games)
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | Q | W | E | R | T | | | | Y | U | I | O | P | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | A | S | D | F | G |------| |------| H | J | K | L | ; | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | Z | X | C | V | B | | | | N | M | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+--------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `----------------------'
*/
[1] = KEYMAP( // layer 1: QWERTY layer (games)
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS,
KC_TRNS, KC_A, KC_S, KC_D, KC_F, KC_G,
KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TRNS,
KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_TRNS,
KC_TRNS, KC_N, KC_M, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
/* Keymap 2: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | + | < | % | # | DF(1)| | | & | [ | ] | \ | : | " |
* |--------+------+------+------+------+------|QWERTY| | |------+------+------+------+------+--------|
* | | ! | - | > | = | @ |------| |------| * | { | } | / | ? | |
* |--------+------+------+------+------+------| DF(0)| | |------+------+------+------+------+--------|
* | | NUBS | NUHS | / | $ | ^ |COLEMAK | | | | ( | ) | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// SYMBOLS
[2] = KEYMAP(
// left hand
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
KC_TRNS, KC_PIPE, KC_PLUS, KC_LT, KC_PERC, KC_HASH, DF(1),
KC_LBRC, KC_EXCLAIM, KC_MINUS, KC_GT, KC_EQUAL, KC_AT,
KC_TRNS, KC_NUBS, KC_NUHS, KC_SLSH, KC_DOLLAR, KC_CIRC, DF(0),
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
KC_TRNS, KC_AMPERSAND, KC_LBRC, KC_RBRC, KC_BSLS, KC_COLN, KC_DQT,
KC_ASTERISK, KC_LCBR, KC_RCBR, KC_SLSH, KC_QUES, KC_TRNS,
KC_TRNS, KC_PIPE, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
/* Keymap 3:
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | |------| |------| | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | HYPR | | HYPR | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------ |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// F-keys
[3] = KEYMAP(
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_HYPR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
/* Keymap 4: Numlock
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | RESET | | | |P-SCRE|S-LOCK|PAUSE | |NLOCK | CALC | = | / | * | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | | | | | | | Vol+ | 7 | 8 | 9 | - | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | |------| |------| Vol- | 4 | 5 | 6 | + | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | HYPR | | HYPR | Mute | 1 | 2 | 3 |Enter | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | 0 | . | RCTL | RCTL |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------ |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
[4] = KEYMAP(
RESET, KC_LSFT, KC_LSFT, KC_SYSREQ, KC_PSCR, KC_SLCK, KC_PAUSE,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_NLCK, KC_CALC, KC_PEQL, KC_PSLS, KC_PAST, KC_LSFT, KC_TRNS,
KC_TRNS, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_TRNS,
KC_VOLD, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS,
KC_HYPR, KC_MUTE, KC_P1, KC_P2, KC_P3, KC_PENT, KC_TRNS,
KC_TRNS, KC_P0, KC_PDOT, KC_RCTL, KC_RCTL,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
static uint8_t state;
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
//reduce LED on time to 1/6th because LEDs are too strong
if (++state < 6) return;
state = 0;
//bit 1: default layer 1 - QWERTY
if (default_layer_state & (1UL << 1)) ergodox_right_led_1_on();
uint8_t layer = biton32(layer_state);
//layer 2 : Symbols (& Fs)
//if (layer == 2) ergodox_right_led_2_on();
//layer 3 : F-lock
if (layer == 3) ergodox_right_led_2_on();
//layer 4 : Num-lock
if (layer == 4) ergodox_right_led_3_on();
};

View file

@ -0,0 +1,23 @@
# ErgoDox EZ colemak_programmer
## Features
* Qwerty and colemak 2 in 1
* Use DF() macro to swap the bottom layer so it behaves literally as collemak or qwerty
* Graphical creator did not allow this so I had to use TO(0) and TO(1) on the picture
* Symbol layer programmers friendly
* Not only symbols are easy to access but common combination are easy too: ->, =>, !=, etc.
* Windows and Mac
* The extra repeated Win key is very handy on Mac
* Numlock
I came to this layout after several iterations. It is not the ultimate best ergonomic layout but it is the best if you switch back and forth between ergodox and laptops.
## Notes
* The Quote and Enter can be swapped
* If you use sculpted key caps try turning the bottom key 180 degrees so it became very comfortable to type with thumb.
Alternatively view the [graphical creator version](http://configure.ergodox-ez.com/keyboard_layouts/kmevwm/edit) but beware it is not the same due to the creator limitations.
![Default](colemak_programmer_001.jpg)
![Default](colemak_programmer_002.jpg)

View file

@ -0,0 +1,166 @@
#include "ergodox.h"
#include "keymap_dvorak.h"
#include "debug.h"
#include "action_layer.h"
/******************************************************************************************
* DVORAK LAYOUT (see http://djelibeibi.unex.es/dvorak/)
* Layer 1: auxiliary keys
* Layer 2: full qwerty layout
*****************************************************************************************/
// LAYERS
#define BASE 0 // dvorak layout (default)
#define AUX 1 // auxiliary keys
// MACROS
/* #define OBRACE 0 // key { or shift */
/* #define CBRACE 1 // key } or shift */
/* #define OBRACK 2 // key [ or left alt */
/* #define CBRACK 3 // key ] or left alt */
/* #define CAPS 4 // caps lock */
// LEDS
#define USB_LED_NUM_LOCK 0
#define USB_LED_CAPS_LOCK 1
#define USB_LED_SCROLL_LOCK 2
#define USB_LED_COMPOSE 3
#define USB_LED_KANA 4
// TIMERS
#define KEY_TAP_FAST 85
#define KEY_TAP_SLOW 95
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Base layer
* Keys with double values (like Esc/Ctrl) correspond to the 'tapped' key and the 'held' key, respectively
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | 1 | 2 | 3 | 4 | 5 | Esc | | Esc | 6 | 7 | 8 | 9 | 0 | = / + |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | ~ |" / ' |, / < |. / > | P | Y | [ | | ] | F | G | C | H | L | / / ? |
* |--------+------+------+------+------+------| { | | } |------+------+------+------+------+--------|
* | Tab | A | O | E |U/LSft| I/L1 |------| |------| D/L1|R/RSft| T | N | S | - / _ |
* |--------+------+------+------+------+------| LGUI | | LGUI |------+------+------+------+------+--------|
* | {/LSft |; / : | Q | J | K | X | | | | B | M | W | V | Z | }/RSft |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | ~L1 | | ~L1 | | | \ / || |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | HOME | END | | LEFT | RIGHT|
* ,------|------|------| |------+--------+------.
* | BSPC | DEL | PGUP | | UP | SPACE |RETURN|
* | / | / |------| |------| / | / |
* | LCTL | LALT |PGDWN | | DOWN | LALT | LCTL |
* `--------------------' `----------------------'
*
*/
[BASE] = KEYMAP(
// left hand
KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC,
KC_TILD, DV_QUOT, DV_COMM,DV_DOT, DV_P, DV_Y, DV_LBRC,
KC_TAB, DV_A, DV_O, DV_E, SFT_T(DV_U), LT(AUX, DV_I),
SFT_T(DV_LBRC), DV_SCLN, DV_Q, DV_J, DV_K, DV_X, KC_LGUI,
KC_NO, KC_NO, KC_NO, KC_NO, MO(AUX),
KC_HOME, KC_END,
KC_PGUP,
CTL_T(KC_BSPC), ALT_T(KC_DEL), KC_PGDN,
// right hand
KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, DV_EQL,
DV_RBRC, DV_F, DV_G, DV_C, DV_R, DV_L, DV_SLSH,
LT(AUX, DV_D), SFT_T(DV_H), DV_T, DV_N, DV_S, DV_MINS,
KC_LGUI, DV_B, DV_M, DV_W, DV_V, DV_Z, SFT_T(DV_RBRC),
MO(AUX), KC_NO, KC_NO, KC_BSLS, KC_NO,
KC_LEFT, KC_RIGHT,
KC_UP,
KC_DOWN, ALT_T(KC_ENT), CTL_T(KC_SPC)
),
/* Keymap 1: Aux layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | VolUp | | | | | | SLEEP | PWR | | | | | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | VolDn | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | * | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | F5 | F6 | F7 | F8 | TRANS|------| |------|TRANS | 4 | 5 | 6 | + | |
* |--------+------+------+------+------+------| | |PSCR |------+-----aan+------+------+------+--------|
* | TRANS | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | / | TRANS |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* |CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS| | TRANS| . | 0 | = | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | TRANS| TRANS| | TRANS| TRANS|
* ,------|------|------| |------+------+------.
* | | | TRANS| | TRANS| | |
* |TRANS |TRANS |------| |------| TRANS| TRANS|
* | | | TRANS| | TRANS| | |
* `--------------------' `--------------------'
*/
[AUX] = KEYMAP(
// left hand
KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_SLEP,
KC_VOLD, KC_F1, KC_F2, KC_F3, KC_F4, KC_NO, KC_NO,
KC_NO , KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS,
KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO,
LCTL(DV_S), LCTL(DV_Z), LCTL(DV_X), LCTL(DV_C), KC_TRNS,
KC_TRNS , KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_PWR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_7, KC_8, KC_9, KC_PAST, KC_NO,
KC_TRNS, KC_4, KC_5, KC_6, KC_PPLS, KC_NO,
KC_PSCR, KC_NO, KC_1, KC_2, KC_3, KC_PSLS, KC_TRNS,
KC_TRNS,KC_DOT, KC_0, KC_PEQL, KC_NO,
KC_TRNS , KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_TAP_TOGGLE(AUX) // FN1 - Momentary Layer 1 (Aux)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
default:
// none
break;
}
}

View file

@ -0,0 +1,74 @@
# Ergodox Dvorak Layout with emacs binding in mind - software version
This configuration is the same as the dvorak_emacs layout, but using a sofware dvorak configuration
instead of a firmware configuration. This layout is for those who run their computer in dvorak mode.
* Control & Alt key on the thumbs (activated if pressed with another key).
* In the same way, "U" and "R" are the shift modifier if pressed with another key.
* "I" and "D" set the layer 1 for the auxiliary keys if pressed with another key.
* Software layout set to english.
## Keymap Layers
- L0: dvorak with some customizations (see layout below)
- L1: auxiliary keys (includes function keys, numpad...)
### Keymap 0: Base layer
Keys with double values (like U/LSft) correspond to the 'tapped' key and the 'held' key, respectively
<pre><code>
,--------------------------------------------------. ,--------------------------------------------------.
| | 1 | 2 | 3 | 4 | 5 | Esc | | Esc | 6 | 7 | 8 | 9 | 0 | = |
|--------|------|------|------|------|-------------| |------|------|------|------|------|------|--------|
| ~ | ' | , | . | P | Y | [ | | ] | F | G | C | H | L | / |
|--------|------|------|------|------|------| { | | } |------|------|------|------|------|--------|
| Tab | A | O | E |U/LSft| I/L1 |------| |------| D/L1|R/RSft| T | N | S | - |
|--------|------|------|------|------|------| LGUI | | LGUI |------|------|------|------|------|--------|
| {/LSft | ; | Q | J | K | X | | | | B | M | W | V | Z | }/RSft |
`--------|------|------|------|------|-------------' `-------------|------|------|------|------|--------'
| | | | | ~L1 | | ~L1 | | | \ | |
`----------------------------------' `----------------------------------'
,-------------. ,-------------.
| HOME | END | | LEFT | RIGHT|
,------|------|------| |------|--------|------.
| BSPC | DEL | PGUP | | UP | SPACE |RETURN|
| / | / |------| |------| / | / |
| LCTL | LALT |PGDWN | | DOWN | LALT | LCTL |
`--------------------' `----------------------'
</pre></code>
### Keymap 1: Aux layer
<pre><code>
,--------------------------------------------------. ,--------------------------------------------------.
| VolUp | | | | | | SLEEP | PWR | | | | | | |
|--------|------|------|------|------|-------------| |------|------|------|------|------|------|--------|
| VolDn | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | * | |
|--------|------|------|------|------|------| | | |------|------|------|------|------|--------|
| | F5 | F6 | F7 | F8 | TRANS|------| |------|TRANS | 4 | 5 | 6 | + | |
|--------|------|------|------|------|------| | |PSCR |------|------|------|------|------|--------|
| TRANS | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | / | TRANS |
`--------|------|------|------|------|-------------' `-------------|------|------|------|------|--------'
|CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS| | TRANS| . | 0 | = | |
`----------------------------------' `----------------------------------'
,-------------. ,-------------.
| TRANS| TRANS| | TRANS| TRANS|
,------|------|------| |------|------|------.
| | | TRANS| | TRANS| | |
|TRANS |TRANS |------| |------| TRANS| TRANS|
| | | TRANS| | TRANS| | |
`--------------------' `--------------------'
</pre></code>
## Generation of .hex file
> In the "qmk_firmware/keyboards/ergodox" directory.
> Execute "make dvorak_emacs". Then the hex file "ergodox_ez_dvorak_emacs.hex" is in the root directory : "qmk_firmware".
> Flash with `teensy_loader` binary

View file

@ -0,0 +1,12 @@
# About this keymap
This keymap is based on the qwertz layout.
It has a key for pressing the left control and the left alt key at once.
Linux makes a difference between AltGr and Control + Alt. Some keybindings are easier to press now.
Also, I added a layer for pressing Control + Alt + F-Keys very fast.
# Layer
Each layer in the *keymap.c*-file has a comment showing the mappings of the layer.

View file

@ -0,0 +1,236 @@
#include "ergodox.h"
#include "debug.h"
#include "action_layer.h"
#include "keymap_german.h"
// Layer names
#define BASE 0 // default layer
#define SYMB 1 // symbol layer
#define MDIA 2 // media keys
#define SHRT 3 // shortcut layer
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Basic layer
*
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | Caps | 1 | 2 | 3 | 4 | 5 |X ` X| | PRSC | 6 | 7 | 8 | 9 | 0 | ß |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | Tab | Q | W | E | R | T | L1 | | L1 | Z | U | I | O | P | Ü |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | Esc | A | S | D | F | G |------| |------| H | J | K | L | Ö | Ä/L2 |
* |--------+------+------+------+------+------| L2 | | L2 |------+------+------+------+------+--------|
* | LShift | Y | X | C | V | B | | | | N | M | , | . | - | RShift |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | LGui | ^ | < | LEFT | RIGHT| | Up | Down | # | + | LCA |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | CTRL | ALT | | Alt |Ctrl/Esc|
* ,------+------+------| |------+--------+------.
* | | | Home | | PgUp | | |
* | Space|Del |------| |------| Bkspc | Enter|
* | | | End | | PgDn | | |
* `--------------------' `----------------------'
*/
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
// Otherwise, it needs KC_*
[BASE] = KEYMAP( // layer 0 : default
// left hand
KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, DE_ACUT,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB),
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G,
KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO),
KC_LGUI, DE_CIRC, DE_LESS, KC_LEFT, KC_RIGHT,
KC_LCTRL, KC_LALT,
KC_HOME,
KC_SPC ,KC_DELT,KC_END,
// right hand
KC_PSCREEN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
TG(MDIA), DE_Z, KC_U, KC_I, KC_O, KC_P, LT(SHRT,DE_UE),
KC_H, KC_J, KC_K, KC_L, DE_OE, LT(MDIA,DE_AE),
MEH_T(KC_NO), KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT,
KC_UP, KC_DOWN, DE_HASH, DE_PLUS, LCA_T(KC_NO),
KC_RALT, KC_RCTRL,
KC_PGUP,
KC_PGDN, KC_BSPC, KC_ENT
),
/* Keymap 1: Symbol Layer
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | | | | | | . | 0 | = | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// SYMBOLS
[SYMB] = KEYMAP(
// left hand
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
KC_TRNS,DE_EXLM,DE_AT, DE_LCBR,DE_RCBR,DE_PIPE,KC_TRNS,
KC_TRNS,DE_HASH,DE_DLR, DE_LPRN,DE_RPRN,DE_GRV,
KC_TRNS,DE_PERC,DE_CIRC,DE_LBRC,DE_RBRC,DE_TILD,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,
// right hand
KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
KC_TRNS, KC_UP, KC_7, KC_8, KC_9, DE_ASTR, KC_F12,
KC_DOWN, KC_4, KC_5, KC_6, DE_PLUS, KC_TRNS,
KC_TRNS, DE_AMPR, KC_1, KC_2, KC_3, DE_BSLS, KC_TRNS,
KC_TRNS,KC_DOT, KC_0, DE_EQL, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
/* Keymap 2: Media and mouse keys
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | Lclk | MsUp | Rclk | | | | | |VolDwn| Mute |VolUp | | F12 |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | Btn4 |MsLeft|MsDown|MsRght| Btn5 |------| |------| | Prev | Stop | Play | Next | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | |WhRght|WhDown| WhUp |WhLeft|WhClk | | | |BwSrch|BwBack|BwHome|BwRefr|BwFwd | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | |MsAcl0|MsAcl1|MsAcl2| | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | |Brwser|Brwser|
* | Lclk | Rclk |------| |------|Back |Forwd |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// MEDIA AND MOUSE
[MDIA] = KEYMAP(
// left hand
KC_TRNS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_TRNS,
KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS,
KC_TRNS, KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5,
KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN3, KC_TRNS,
KC_TRNS, KC_TRNS, KC_ACL0, KC_ACL1, KC_ACL2,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_BTN1, KC_BTN2, KC_TRNS,
// right hand
KC_TRNS, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11,
KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_F12,
KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS,
KC_TRNS, KC_WSCH, KC_WBAK, KC_WHOM, KC_WREF, KC_WFWD, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_WBAK, KC_WFWD
),
/* Keymap 3: Linux shortcuts
*
* ,--------------------------------------------------. ,--------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | |LCA-F1|LCA-F2|LCA-F3|LCA-F4|LCA-F5| | | |LCA-F6|LCA-F7|LCA-F8|LCA-F9| | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | |LCA-Le| |LCA-Ri| |------| |------| | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
* | | | | | | | | | | | | | | | |
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
* | | | |LCA-Le|LCA-Ri| | | | | | |
* `----------------------------------' `----------------------------------'
* ,-------------. ,-------------.
* | | | | | |
* ,------|------|------| |------+------+------.
* | | | | | | | |
* | | |------| |------| | |
* | | | | | | | |
* `--------------------' `--------------------'
*/
// Shortcuts
[SHRT] = KEYMAP(
// left hand
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, LCA(KC_F1), LCA(KC_F2), LCA(KC_F3), LCA(KC_F4), LCA(KC_F5), KC_TRNS,
KC_TRNS, KC_TRNS, LCA(KC_LEFT), KC_TRNS, LCA(KC_RIGHT), KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, LCA(KC_LEFT), LCA(KC_RIGHT),
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS,
// right hand
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, LCA(KC_F6), LCA(KC_F7), LCA(KC_F8), LCA(KC_F9), KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
LCA(KC_UP), LCA(KC_DOWN), KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS,
KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS
),
};
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case SYMB:
ergodox_right_led_1_on();
break;
case MDIA:
ergodox_right_led_2_on();
break;
case SHRT:
ergodox_right_led_3_on();
break;
default:
ergodox_board_led_off();
break;
}
};

View file

@ -0,0 +1,177 @@
#include "ergodox.h"
#include "debug.h"
#include "action_layer.h"
#include "bootloader.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP( // layer 0 : default
// left hand
KC_EQL , KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC,
KC_FN25 , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME,
KC_FN27 , KC_A, KC_S, KC_D, KC_F, KC_G,
KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP,
KC_LGUI , KC_GRV,KC_LEFT,KC_RGHT,KC_LALT,
KC_NO , KC_NO ,
KC_NO ,
KC_BSPC,KC_DEL ,KC_FN23,
// right hand
KC_RBRC , KC_6, KC_7 , KC_8, KC_9, KC_0, KC_MINS,
KC_END , KC_Y, KC_U , KC_I, KC_O, KC_P, KC_FN28,
KC_H , KC_J, KC_K , KC_L, KC_SCLN,KC_FN30,
KC_PGDN , KC_N, KC_M , KC_COMM,KC_DOT, KC_SLSH,KC_FN29,
KC_RALT , KC_DOWN,KC_UP, KC_NO ,KC_RGUI,
KC_NO , KC_NO,
KC_NO ,
KC_FN29,KC_ENT ,KC_SPC
),
KEYMAP( // layer 1 : function and symbol keys
// left hand
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11,
KC_TRNS,KC_AT,KC_UNDS ,KC_LBRC,KC_RBRC,KC_CIRC ,KC_TRNS,
KC_TRNS,KC_BSLS,KC_SLSH,KC_LCBR ,KC_RCBR ,KC_ASTR,
KC_TRNS,KC_HASH ,KC_DLR ,KC_PIPE ,KC_TILD ,KC_GRV ,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_FN1,
// right hand
KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
KC_TRNS,KC_EXLM,LSFT(KC_COMM),LSFT(KC_DOT),KC_EQL,KC_AMPR, KC_TRNS,
LSFT(KC_SLSH),KC_LPRN,KC_RPRN,KC_MINS,LSFT(KC_SCLN),KC_TRNS,
KC_TRNS,KC_PLUS,LSFT(KC_5),LSFT(KC_QUOT),KC_QUOT,KC_SCLN,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
KEYMAP( // layer 2: navigation
// left hand
KC_NO,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_PGUP,KC_HOME,KC_UP ,KC_END,KC_NO ,KC_TRNS,
KC_TRNS,KC_PGDN,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,
KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO,KC_NO,KC_NO,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_FN1 ,
// right hand
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS ,KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_END ,KC_TRNS,
KC_NO, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT,KC_TRNS,
KC_TRNS,KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP,KC_TRNS,
KC_LEFT, KC_DOWN,KC_RGHT,KC_PGDN,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
KEYMAP( // layer 3 : teensy bootloader functions
// left hand
KC_FN0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_FN1 ,
// right hand
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
KEYMAP( // layer 4: numpad
// left hand
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,
// right hand
KC_TRNS,KC_NLCK,KC_PSLS,KC_PAST,KC_PAST,KC_PMNS,KC_BSPC,
KC_TRNS,KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS,KC_BSPC,
KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT,
KC_TRNS,KC_NO, KC_P1, KC_P2, KC_P3, KC_PPLS,KC_PENT,
KC_P0, KC_PDOT,KC_SLSH,KC_PENT,KC_PENT,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
};
/* id for user defined functions */
enum function_id {
TEENSY_KEY,
};
/*
* Fn action definition
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(TEENSY_KEY), // FN0 - Teensy key
[1] = ACTION_LAYER_SET(0, ON_PRESS),
//[11] = ACTION_MODS_KEY(MOD_LSFT, KC_COMM),
//[12] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT),
//[14] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH),
//[17] = ACTION_MODS_KEY(MOD_LSFT, KC_SCLN),
//[20] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
//[21] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT),
[23] = ACTION_LAYER_SET(3, ON_PRESS),
[24] = ACTION_LAYER_SET(2, ON_PRESS),
[25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_TAB),
[26] = ACTION_LAYER_SET(1, ON_PRESS),
[27] = ACTION_LAYER_TAP_KEY(1, KC_CAPS),
[28] = ACTION_MODS_TAP_KEY(MOD_RCTL,KC_BSLS),
//[29] = ACTION_LAYER_TOGGLE(4),
[29] = ACTION_MODS_TAP_KEY(MOD_RSFT,KC_ESC),
[30] = ACTION_LAYER_TAP_KEY(1, KC_QUOT),
[31] = ACTION_LAYER_MOMENTARY(2),
//[] = ACTION_LAYER_TAP_KEY(4, KC_S),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
{
if (id == TEENSY_KEY) {
clear_keyboard();
print("\n\nJump to bootloader... ");
_delay_ms(250);
bootloader_jump(); // should not return
print("not supported.\n");
}
}

View file

@ -0,0 +1,133 @@
My main layout (Layer 0) is based on qwerty. I tried to fit the layout of the kinesis keyboard onto the ergodox. Furthermore I did some tweaks.
The other layers are seldom used. Except the F Keys and the teensy key. As I own a ergodox I cant press the reset button, so i need a key to send the teensy into reprogram mode.
There is a layer with symbols a numpad. These layers are seldom used. Except the F Keys and the teensy key. As I own a ergodox I need a key to reprogram, because I can't access the reset button.
I am a linux user and need the esc key and str keys often therefore it is easyly accessed. Switching console str+alt+tab+f2 (layer 2 and 2) is tricky but you get it after a while.
As I live in germany and need to type umlaut frquently, i mapped the CAPS to the meta key, and swapped ' and ". So I can type ö with CAPS o + ¨. no need to press o+SHIFT+'
As a note for linux users i use str+p to get last command, instead of using the cursor keys.
HOWTO to convert CAPS to Meta-Key and swap ' with "
* create file with following content
.Xmodmap
clear Lock
keycode 48 = quotedbl apostrophe quotedbl apostrophe
keycode 66 = Multi_key
* apply with
xmodmap .Xmodmap
* convert to xkbmap
xkbcomp $DISPLAY $HOME/.xkbmap
* automatic startup each time you startup x
echo 'xkbcomp $HOME/.xkbmap $DISPLAY' >> ~/.xinitrc
KEYMAP( // layer 0 : default
// left hand
KC_EQL , KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC,
KC_FN25 , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME,
KC_FN27 , KC_A, KC_S, KC_D, KC_F, KC_G,
KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP,
KC_LGUI , KC_GRV,KC_LEFT,KC_RGHT,KC_LALT,
KC_NO , KC_NO ,
KC_NO ,
KC_BSPC,KC_DEL ,KC_FN23,
// right hand
KC_RBRC , KC_6, KC_7 , KC_8, KC_9, KC_0, KC_MINS,
KC_END , KC_Y, KC_U , KC_I, KC_O, KC_P, KC_FN28,
KC_H , KC_J, KC_K , KC_L, KC_SCLN,KC_FN30,
KC_PGDN , KC_N, KC_M , KC_COMM,KC_DOT, KC_SLSH,KC_FN29,
KC_RALT , KC_DOWN,KC_UP, KC_NO ,KC_RGUI,
KC_NO , KC_NO,
KC_NO ,
KC_FN29,KC_ENT ,KC_SPC
),
KEYMAP( // layer 1 : function and symbol keys
// left hand
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11,
KC_TRNS,KC_AT,KC_UNDS ,KC_LBRC,KC_RBRC,KC_CIRC ,KC_TRNS,
KC_TRNS,KC_BSLS,KC_SLSH,KC_LCBR ,KC_RCBR ,KC_ASTR,
KC_TRNS,KC_HASH ,KC_DLR ,KC_PIPE ,KC_TILD ,KC_GRV ,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_FN1,
// right hand
KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
KC_TRNS,KC_EXLM,LSFT(KC_COMM),LSFT(KC_DOT),KC_EQL,KC_AMPR, KC_TRNS,
LSFT(KC_SLSH),KC_LPRN,KC_RPRN,KC_MINS,LSFT(KC_SCLN),KC_TRNS,
KC_TRNS,KC_PLUS,LSFT(KC_5),LSFT(KC_QUOT),KC_QUOT,KC_SCLN,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
KEYMAP( // layer 2: navigation
// left hand
KC_NO,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_PGUP,KC_HOME,KC_UP ,KC_END,KC_NO ,KC_TRNS,
KC_TRNS,KC_PGDN,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,
KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO,KC_NO,KC_NO,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_FN1 ,
// right hand
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS ,KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_END ,KC_TRNS,
KC_NO, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT,KC_TRNS,
KC_TRNS,KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP,KC_TRNS,
KC_LEFT, KC_DOWN,KC_RGHT,KC_PGDN,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
KEYMAP( // layer 3 : teensy bootloader functions
// left hand
KC_FN0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_FN1 ,
// right hand
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
KEYMAP( // layer 4: numpad
// left hand
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS,
// right hand
KC_TRNS,KC_NLCK,KC_PSLS,KC_PAST,KC_PAST,KC_PMNS,KC_BSPC,
KC_TRNS,KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS,KC_BSPC,
KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT,
KC_TRNS,KC_NO, KC_P1, KC_P2, KC_P3, KC_PPLS,KC_PENT,
KC_P0, KC_PDOT,KC_SLSH,KC_PENT,KC_PENT,
KC_TRNS,KC_TRNS,
KC_TRNS,
KC_TRNS,KC_TRNS,KC_TRNS
),
};

View file

@ -8,15 +8,16 @@
#define MDIA 2 // media keys #define MDIA 2 // media keys
//macros //macros
#define CTL_SFT_T 100 #define CTL_SFT_T 100 // open type
#define CTL_SFT_G 101 #define CTL_SFT_G 101 // find references
#define CTL_ALT_H 102 #define CTL_ALT_H 102 // open call hierarchy
#define CTL_SFT_R 103 // open resource
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 0: Basic layer /* Keymap 0: Basic layer
* *
* ,--------------------------------------------------. ,--------------------------------------------------. * ,--------------------------------------------------. ,--------------------------------------------------.
* | = | 1 | 2 | 3 | 4 | 5 | ESC | | M 100| 6 | 7 | 8 | 9 | 0 | - | * | = | 1 | 2 | 3 | 4 | 5 | ESC | |M100/3| 6 | 7 | 8 | 9 | 0 | - |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* |TAB /Alt| Q | W | E | R | T | Meh | | Meh | Y | U | I | O | P |\ / ALT | * |TAB /Alt| Q | W | E | R | T | Meh | | Meh | Y | U | I | O | P |\ / ALT |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
@ -38,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Otherwise, it needs KC_* // Otherwise, it needs KC_*
[BASE] = KEYMAP( // layer 0 : default [BASE] = KEYMAP( // layer 0 : default
// left hand // left hand
KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, LT(MDIA, KC_EQL),KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC,
ALT_T(KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, ALL_T(KC_NO), ALT_T(KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, ALL_T(KC_NO),
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(SYMB), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(SYMB),
@ -47,11 +48,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_HOME, KC_HOME,
KC_SPC,KC_BSPC,KC_END, KC_SPC,KC_BSPC,KC_END,
// right hand // right hand
M(CTL_SFT_T),KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, LT(M(CTL_SFT_T),
MEH_T(KC_NO),KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, M(CTL_SFT_R)),KC_6, KC_7, KC_8, KC_9, KC_0, LT(MDIA, KC_MINS),
KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),CTL_T(KC_QUOT), MEH_T(KC_NO), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
MO(SYMB), KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), CTL_T(KC_QUOT),
LALT(KC_LSFT),KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT, MO(SYMB), KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,
LALT(KC_LSFT),KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,
KC_LALT, KC_CAPS, KC_LALT, KC_CAPS,
KC_PGUP, KC_PGUP,
KC_PGDN,KC_DEL, KC_ENT KC_PGDN,KC_DEL, KC_ENT
@ -101,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap 2: Media and mouse keys /* Keymap 2: Media and mouse keys
* *
* ,--------------------------------------------------. ,--------------------------------------------------. * ,--------------------------------------------------. ,--------------------------------------------------.
* | | | | | | | | | | | | | | | | * | | | | | | |RESET | |RESET | | | | | | |
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
* | | | | MsUp | | | | | | | | | | | | * | | | | MsUp | | | | | | | | | | | |
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
@ -121,7 +123,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/ */
// MEDIA AND MOUSE // MEDIA AND MOUSE
[MDIA] = KEYMAP( [MDIA] = KEYMAP(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
@ -130,7 +132,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
// right hand // right hand
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
@ -172,6 +174,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
} }
return MACRO(U(LCTL), U(LALT), END); return MACRO(U(LCTL), U(LALT), END);
break; break;
case CTL_SFT_R:
if (record->event.pressed) {
return MACRO(D(LCTL), D(LSFT), T(R), END);
}
return MACRO(U(LCTL), U(LSFT), END);
break;
} }
return MACRO_NONE; return MACRO_NONE;
}; };

View file

@ -9,6 +9,7 @@
#define SYMB 1 // symbols layer #define SYMB 1 // symbols layer
#define MDIA 2 // media layer #define MDIA 2 // media layer
#define SPEC 3 // special layer #define SPEC 3 // special layer
#define RBASE 4 // reverse default layer
#define LSymb 10 // left symbol-shift key #define LSymb 10 // left symbol-shift key
#define LMdia 11 // left media-shift key #define LMdia 11 // left media-shift key
@ -17,15 +18,23 @@
#define RMdia 14 // right media-shift key #define RMdia 14 // right media-shift key
#define RSpec 15 // right special-shift key #define RSpec 15 // right special-shift key
#define NotEq 16 // != macro
#define GrtEq 17 // >= macro
#define LesEq 18 // <= macro
#define DeRef 19 // -> macro
#define MUL 20 // mouse up left #define MUL 20 // mouse up left
#define MUR 21 // mouse up right #define MUR 21 // mouse up right
#define MDL 22 // mouse down left #define MDL 22 // mouse down left
#define MDR 23 // mouse down right #define MDR 23 // mouse down right
/* /*
* The Ordinary Layout for the Ergodox EZ keyboard, v4.20 * The Ordinary Layout for the Ergodox EZ keyboard, v5
* *
* Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com * Modifications from the default Ergodox EZ layout
* by Nicholas Keene ergodoxez@nicholaskeene.com
* *
* No rights reserved. This software is in the public domain. * No rights reserved. This software is in the public domain.
* Credit me if you are friendly but if you're a jerk don't bother. * Credit me if you are friendly but if you're a jerk don't bother.
@ -44,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------|
* | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media |
* |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------|
* | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | * | Symbol | ^A | S | D | ^F | G |------| |------| H | ^J | K | L | ^; | '" Symbol |
* |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------|
* | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals |
* `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------'
@ -60,24 +69,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/ */
[BASE] = KEYMAP( [BASE] = KEYMAP(
// left hand // left hand
F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC
,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC ,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC
,M(LSymb) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,M(LSymb) ,LT(RBASE, KC_A),KC_S ,KC_D ,LT(RBASE, KC_F) ,KC_G
,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) ,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB)
,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT,KC_LGUI ,KC_LCTL ,MEH_T(KC_NO) ,ALL_T(KC_NO),KC_LALT,KC_LGUI
,KC_HOME,KC_END ,KC_HOME,KC_END
,KC_PGUP ,KC_PGUP
,KC_BSPC,KC_DEL ,KC_PGDN ,KC_BSPC,KC_DEL ,KC_PGDN
// right hand // right hand
,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec)
,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia)
,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) ,KC_H ,LT(RBASE, KC_J),KC_K ,KC_L ,LT(RBASE,KC_SCLN),F(RSymb)
,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT
,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL ,KC_RGUI ,KC_RALT,KC_HYPR,KC_MEH ,KC_RCTL
,KC_LEFT ,KC_RGHT ,KC_LEFT ,KC_RGHT
,KC_UP ,KC_UP
,KC_DOWN ,KC_ENT ,KC_SPC ,KC_DOWN ,KC_ENT ,KC_SPC
), ),
/******* Symbols Layer ************************************************************************************************* /******* Symbols Layer *************************************************************************************************
* *
@ -87,52 +96,52 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | |
* |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------|
* | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | |
* |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| * |-----------+------+------+------+------+------| ' | | " |------+------+------+------+------+-----------|
* | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | * | | % | ^ | [ | ] | ~ | | | | \ | 1 | 2 | 3 | - | |
* `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------'
* | LCtrl | Meh |Hyper | LAlt | LGui | | 0 | . | = | + | Ent | * | ; | & | * | < | > | | 0 | . | = | + | Enter |
* `-----------------------------------' `-----------------------------------' * `-----------------------------------' `-----------------------------------'
* ,-------------. ,-------------. * ,-------------. ,-------------.
* | Left | Right| | Home | End | * | |||| | |||| | | |||| | |||| |
* ,------|------|------| |------+------+------. * ,------|------|------| |------+------+------.
* | | | Up | | PgUp | | | * | Plus | Equal| |||| | | |||| | Under| Dash |
* |Space |Enter |------| |------|BackSp| Del | * | | |------| |------| Score| |
* | | | Down | | PgDn | | | * | + | = | != | | -> | _ | - |
* `--------------------' `--------------------' * `--------------------' `--------------------'
*/ */
[SYMB] = KEYMAP( [SYMB] = KEYMAP(
// left hand // left hand
KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC
,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) ,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM)
,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV ,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV
,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_QUOT
,KC_LCTL ,KC_MEH ,KC_HYPR ,KC_LALT ,KC_LGUI ,KC_SCLN ,KC_AMPR ,KC_ASTR ,LSFT(KC_COMM),LSFT(KC_DOT)
,KC_LEFT ,KC_RGHT ,M(GrtEq),M(LesEq)
,KC_UP ,KC_NO
,KC_SPC ,KC_ENT ,KC_DOWN ,KC_PLUS ,KC_EQL ,M(NotEq)
// right hand // right hand
,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS
,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS
,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS
,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS ,LSFT(KC_QUOT),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS
,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT
,KC_HOME ,KC_END ,KC_NO ,KC_NO
,KC_PGUP ,KC_NO
,KC_PGDN ,KC_BSPC ,KC_DEL ,M(DeRef) ,LSFT(KC_MINS),KC_MINS
), ),
/******* Media Layer ******************************************************************************************************* /******* Media Layer *******************************************************************************************************
* *
* ,---------------------------------------------------------------. ,---------------------------------------------------------------. * ,---------------------------------------------------------------. ,---------------------------------------------------------------.
* | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | * | | F11 | F12 | F13 | F14 | F15 | Esc | | |||| | F16 | F17 | F18 | F19 | F20 | |
* |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------|
* | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | | * | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | |
* |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------|
* | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | | * | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | |
* |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------|
* | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | * | | |||| |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | |||| | End | Down | PgDn | |||| | |
* `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------'
* |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| * | ||| | |||| | MClick | LClick | R Click| | Insert | Del | |||| | |||| | ||| |
* `---------------------------------------------' `---------------------------------------------' * `---------------------------------------------' `---------------------------------------------'
* ,-------------. ,-------------. * ,-------------. ,-------------.
* | Stop |Refrsh| | Prev | Next | * | Stop |Refrsh| | Prev | Next |
@ -148,7 +157,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
,KC_TRNS ,KC_POWER ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U ,KC_TRNS ,KC_POWER ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U
,KC_TRNS ,KC_SLEP ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD ,KC_TRNS ,KC_SLEP ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD
,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D ,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D
,KC_LCTL ,KC_MEH ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 ,KC_NO ,KC_NO ,KC_BTN3 ,KC_BTN1 ,KC_BTN2
,KC_WSTP ,KC_WREF ,KC_WSTP ,KC_WREF
,KC_WSCH ,KC_WSCH
,KC_WBAK ,KC_NO ,KC_WHOM ,KC_WBAK ,KC_NO ,KC_WHOM
@ -157,7 +166,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
,KC_WH_U ,KC_PSCR ,KC_HOME ,KC_UP ,KC_PGUP ,KC_MAIL ,KC_TRNS ,KC_WH_U ,KC_PSCR ,KC_HOME ,KC_UP ,KC_PGUP ,KC_MAIL ,KC_TRNS
,KC_NLCK ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_MYCM ,KC_TRNS ,KC_NLCK ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_MYCM ,KC_TRNS
,KC_WH_D ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_TRNS ,KC_WH_D ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_TRNS
,GUI_T(KC_INS),ALT_T(KC_DEL),KC_HYPR ,KC_MEH ,KC_RCTL ,KC_INS ,KC_DEL ,KC_NO ,KC_NO ,KC_NO
,KC_MPRV ,KC_MNXT ,KC_MPRV ,KC_MNXT
,KC_VOLU ,KC_VOLU
,KC_VOLD ,KC_MSTP ,KC_MPLY ,KC_VOLD ,KC_MSTP ,KC_MPLY
@ -203,7 +212,49 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
,KC_TRNS ,KC_TRNS
,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
) ),
/******* Reverse Base Layer *********************************************************************************************
*
* ,------------------------------------------------------. ,------------------------------------------------------.
* | =+ | 0 | 9 | 8 | 7 | 6 | - | | Esc | 5 | 4 | 3 | 2 | 1 | `~ |
* |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------|
* | \| | P | O | I | U | Y | ] | | [ | T | R | E | W | Q | Tab |
* |------------+------+------+------+------+------| | | |------+------+------+------+------+------------|
* | '" | ; | L | K | J | H |------| |------| G | F | D | S | A | |
* |------------+------+------+------+------+------| Tab | |Shift |------+------+------+------+------+------------|
* | Capitals | / | . | , | M | N | | | -Tab | B | V | C | X | Z | Capitals |
* `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------'
* | LCtrl | Meh |Hyper | LAlt | LGui | | RGui | RAlt | Hyper| Meh | RCtrl |
* `-----------------------------------' `-----------------------------------'
* ,-------------. ,-------------.
* | Left | Right| | Home | End |
* ,------|------|------| |------+------+------.
* | | | Up | | PgUp | | |
* |Space |Enter |------| |------|BackSp| Del |
* | | | Down | | PgDn | | |
* `--------------------' `--------------------'
*/
[RBASE] = KEYMAP(
// left hand
KC_EQL ,KC_0 ,KC_9 ,KC_8 ,KC_7 ,KC_6 ,KC_MINS
,KC_BSLS ,KC_P ,KC_O ,KC_I ,KC_U ,KC_Y ,KC_RBRC
,KC_QUOT ,LT(RBASE, KC_SCLN) ,KC_L ,KC_K ,LT(RBASE, KC_J) ,KC_H
,KC_RSFT ,KC_SLSH ,KC_DOT ,KC_COMM,KC_M ,KC_N ,KC_TAB
,KC_RCTL ,MEH_T(KC_NO),ALL_T(KC_NO),KC_RALT,KC_RGUI
,KC_LEFT ,KC_RGHT
,KC_UP
,KC_SPC ,KC_ENT ,KC_DOWN
// right hand
,KC_ESC ,KC_5 ,KC_4 ,KC_3 ,KC_2 ,KC_1 ,KC_GRV
,KC_LBRC ,KC_T ,KC_R ,KC_E ,KC_W ,KC_Q ,KC_TAB
,KC_G ,LT(RBASE, KC_F),KC_D ,KC_S ,LT(RBASE, KC_A) ,KC_NO
,LSFT(KC_TAB),KC_B ,KC_V ,KC_C ,KC_X ,KC_Z ,KC_LSFT
,KC_LGUI,KC_LALT,KC_HYPR ,KC_MEH,KC_LCTL
,KC_HOME ,KC_END
,KC_PGUP
,KC_PGDN ,KC_BSPC ,KC_DEL
)
}; };
const uint16_t PROGMEM fn_actions[] = { const uint16_t PROGMEM fn_actions[] = {
@ -227,14 +278,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{ {
switch(id) { switch(id) {
// There are two shift keys for each layer so we increment a layer_shift var when one // There are two shift keys for each layer so we increment a layer_shift var when one
// is pressed and decrement when one is released. If both are pressed at the same time // is pressed and decrement when one is released. The shift counts are bound between 0 and 2
// then the layer is locked (or unlocked). The shift counts are bound between 0 and 2
// only because sometimes rapid pressing led to irregular events; this way the states // only because sometimes rapid pressing led to irregular events; this way the states
// are self healing during use. // are self healing during use.
case LSymb: // case LSymb: //
if (record->event.pressed) { // when the LSymb button is pressed if (record->event.pressed) { // when the LSymb button is pressed
if(++symb_shift > 2) mdia_shift = 2; // increment the symb shift count, max two if(++symb_shift > 2) symb_shift = 2; // increment the symb shift count, max two
if(spec_shift) symb_lock = !symb_lock; // if the Special layer is on, toggle the shift lock if(spec_shift) symb_lock = !symb_lock; // if the Special layer is on, toggle the shift lock
layer_on(SYMB); // in any case, turn on the Symbols layer layer_on(SYMB); // in any case, turn on the Symbols layer
} else { // when the LSymb button is released } else { // when the LSymb button is released
@ -264,7 +314,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
case LSpec: case LSpec:
if (record->event.pressed) { // when the LSpec button is pressed if (record->event.pressed) { // when the LSpec button is pressed
if(symb_shift) symb_lock == !symb_lock; // if another layer button is engaged, then if(symb_shift) symb_lock = !symb_lock; // if another layer button is engaged, then
else if(mdia_shift) mdia_lock = !mdia_lock; // lock that layer, be it caps or symb or mdia else if(mdia_shift) mdia_lock = !mdia_lock; // lock that layer, be it caps or symb or mdia
else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) {
register_code(KC_GRV); // otherwise, if it's an uninterrupted tap, emit a char register_code(KC_GRV); // otherwise, if it's an uninterrupted tap, emit a char
@ -340,6 +390,30 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
} }
break; break;
case NotEq:
if (record->event.pressed) {
return MACRO( I(10), D(LSFT), T(EXLM), U(LSFT), T(EQL), END ); // !=
}
break;
case GrtEq:
if (record->event.pressed) {
return MACRO( I(10), D(LSFT), T(COMM), U(LSFT), T(EQL), END ); // <=
}
break;
case LesEq:
if (record->event.pressed) {
return MACRO( I(10), D(LSFT), T(DOT), U(LSFT), T(EQL), END ); // >=
}
break;
case DeRef:
if (record->event.pressed) {
return MACRO( I(10), T(MINS), D(LSFT), T(DOT), U(LSFT), END ); // ->
}
break;
// mouse diagonals // mouse diagonals
case MUL: // mouse up left case MUL: // mouse up left

Binary file not shown.

Before

Width:  |  Height:  |  Size: 96 KiB

After

Width:  |  Height:  |  Size: 118 KiB

View file

@ -7,10 +7,10 @@
[{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"], [{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"],
[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Q",{x:14.5},"P",{c:"#c6c600",t:"#002299",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"], [{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Q",{x:14.5},"P",{c:"#c6c600",t:"#002299",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"],
[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000"},"D",{x:10.5},"K"], [{y:-0.375,x:3.5,c:"#cccccc",t:"#000000"},"D",{x:10.5},"K"],
[{y:-0.875,x:2.5},"S",{x:1},"F",{x:8.5},"J",{x:1},"L"], [{y:-0.875,x:2.5},"S",{x:1,fa:[0,0,0,1]},"F\n\n\nreverse",{x:8.5},"J\n\n\nreverse",{x:1},"L"],
[{y:-0.875,x:5.5},"G",{x:6.5},"H"], [{y:-0.875,x:5.5},"G",{x:6.5},"H"],
[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A",{x:14.5},":\n;",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"], [{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A\n\n\nreverse",{x:14.5},":\n;\n\nreverse",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"],
[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"], [{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"],
[{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"], [{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"],
[{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."], [{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."],
[{y:-0.875,x:5.5},"B",{x:6.5},"N"], [{y:-0.875,x:5.5},"B",{x:6.5},"N"],

Binary file not shown.

Before

Width:  |  Height:  |  Size: 120 KiB

After

Width:  |  Height:  |  Size: 121 KiB

View file

@ -15,10 +15,10 @@
[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#1e8fff"},"End",{x:1},"Page\n\n\n\n\n\nDown"], [{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#1e8fff"},"End",{x:1},"Page\n\n\n\n\n\nDown"],
[{y:-0.875,x:5.5,c:"#9977ee"},"Mute",{x:6.5,c:"#737373",a:7},""], [{y:-0.875,x:5.5,c:"#9977ee"},"Mute",{x:6.5,c:"#737373",a:7},""],
[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"], [{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff",fa:[0,0,0,1]},"Delete\n\n\nOption"], [{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff"},"Delete"],
[{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert\n\n\nCmd",{x:1,c:"#dddd77"},"Hyper"], [{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert",{x:1,c:"#737373",a:7},""],
[{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Crtl\n\n\nRCtrl"], [{y:-0.75,x:0.5},"","",{x:14.5},"",""],
[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], [{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee",a:4,fa:[0,0,0,1]},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"],
[{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"], [{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"],
[{x:2},"Home\n\n\nBrowser"], [{x:2},"Home\n\n\nBrowser"],
[{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"], [{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"],

Binary file not shown.

Before

Width:  |  Height:  |  Size: 99 KiB

After

Width:  |  Height:  |  Size: 88 KiB

View file

@ -10,18 +10,18 @@
[{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"], [{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"],
[{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"], [{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"],
[{y:-0.875,c:"#000000",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], [{y:-0.875,c:"#000000",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"],
[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"], [{y:-0.625,x:6.5,c:"#bbddbb",t:"#000000",a:6,h:1.5},"'",{x:4.5,h:1.5},"\""],
[{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"], [{y:-0.75,x:3.5,a:4},"[",{x:10.5,c:"#89b087"},"2"],
[{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"], [{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"],
[{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"], [{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"],
[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], [{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."], [{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"<",{x:10.5,c:"#89b087"},"."],
[{y:-0.875,x:2.5,c:"#dddd77"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="], [{y:-0.875,x:2.5,c:"#bbddbb"},"*",{x:1},">",{x:8.5,c:"#89b087"},"0",{x:1},"="],
[{y:-0.75,x:0.5,c:"#dddd77"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"], [{y:-0.75,x:0.5,c:"#bbddbb"},";","&",{x:14.5,c:"#89b087"},"+","Enter"],
[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Left","Right"], [{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#bbddbb"},"<=",">="],
[{h:2},"Space",{h:2},"Enter","Up"], [{a:7,h:2},"+",{h:2},"=",{c:"#737373"},""],
[{x:2},"Down"], [{x:2,c:"#bbddbb",a:4},"!="],
[{r:-30,rx:13,y:-1,x:-3},"Home","End"], [{r:-30,rx:13,y:-1,x:-3,c:"#737373",a:7},"",""],
[{x:-3},"Page\n\n\n\n\n\nUp",{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete"], [{x:-3},"",{c:"#bbddbb",h:2},"_",{h:2},"-"],
[{x:-3},"Page\n\n\n\n\n\nDown"] [{x:-3,a:4},"->"]

View file

@ -10,12 +10,13 @@ no rights reserved, use for any purposes, credit me if you are a nice person
## The Base Layout ## ## The Base Layout ##
* *White Keys* are all the normal characters and symbols in all the normal locations (except for the brackets). * *White Keys* are all the normal characters and symbols in all the normal locations (except for the brackets, and who touch-types brackets?).
* *Modifier Keys* are light yellow and in the traditional location: Control, Option, Command, plus Hyper and Meh. * *Modifier Keys* are light yellow and in the traditional locationn at the bottom of the keyboard: Control, Option, Command, plus Hyper and Meh. Modifier keys are only found on the base layout.
* *Shift Keys* are dark yellow, found on the outsides of the keyboard. Capitals Shift (traditional shift) is found in the usual place and above that is found Symbol Shift, Media Shift, and Special Shift (Shift Lock). * *Shift Keys* are dark yellow, found on the outsides of the keyboard. Capitals Shift (traditional Shift) is found in the usual place and above that are Symbol Shift, Media Shift, and Special Shift (Shift Lock).
* Several of the shift keys double for entry of characters which would typically be in those locations. * Several of the shift keys double for entry of characters which would typically be in those locations.
* *Thumb Keys* shown in orange are for text navigation and manipulation. * *Thumb Keys* shown in orange are for text navigation and manipulation.
* *Escape* is red and it is always found in that location no matter what. * The keys under pinky fingers and index fingers will *reverse* the keyboard layout.
* *Escape* is red and it is always found in that location (*except* when the layout is reversed).
![Ordinary base layout](ordinary-base.png) ![Ordinary base layout](ordinary-base.png)
@ -23,12 +24,16 @@ The four big orange keys are arranged differently than in the default Ergodox EZ
The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code. The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code.
#### Reversing The Base Layout ####
The Ordinary Layout can be used to perform one-handed chorded text input. If you hold down the key under either index finger or either pinky finger (A, F, J and Semicolon), the whole base layout reverses order. Most keys are _mirrored_ but the delete keys, home/end, and left/right arrow keys are merely *translated* to preserve directionality. Pro-tip: This feature is particularly handly for bringing the Enter key to the left hand when the right hand is using the mouse.
## The Symbols Layer ## ## The Symbols Layer ##
* *Symbols* shown in light green. All kinds of brackets are available on this layer. Ampersand and Pipe justapose each other. Pipe, slash, and backslash are arranged in a column. * *Symbols* shown in light green. All kinds of brackets are available on this layer. Ampersand and Pipe juxtapose each other. Pipe, slash, and backslash are arranged in a column.
* *F-Keys* are bright green and overlay the row of numerals. * *F-Keys* are bright green and overlay the row of numerals. This layer has F1-F10, higher *F-Keys* are on the Symbols layer.
* *Number pad* in dark green under the right hand includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads so that NumLock is not needed. * *Number pad* in dark green under the right hand includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads so that NumLock is not needed.
* *Thumb keys* on this layer are the *reverse* of the orange keys on the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be. * The dark gray keys do nothing in case you bump them by accident.
![Ordinary symbol layout](ordinary-symbol.png) ![Ordinary symbol layout](ordinary-symbol.png)
@ -42,7 +47,7 @@ The Symbols Layer is based on the Coder Layer from the default Ergodox EZ layout
* Higher-order *F-Keys* are shown in bright green overylaying the numerals. * Higher-order *F-Keys* are shown in bright green overylaying the numerals.
* *Application Keys* to control web browsers and audio players are dark purple but don't get too excited because these have weak support on operating systems I've looked at. Good luck. * *Application Keys* to control web browsers and audio players are dark purple but don't get too excited because these have weak support on operating systems I've looked at. Good luck.
* The light purple keys are various operating system keys such as NumLock and Mute and a button to navigate to My Computer (usually your home dir). * The light purple keys are various operating system keys such as NumLock and Mute and a button to navigate to My Computer (usually your home dir).
* The dark gray keys do nothing in case you bump them by accident * The dark gray keys do nothing in case you bump them by accident.
![Ordinary media layout](ordinary-media.png) ![Ordinary media layout](ordinary-media.png)
@ -64,27 +69,33 @@ Multiple layers can be turned on at once. The Capitals layer will affect charact
The Special Shift layer is mostly used to lock the shift keys but in order to make this layout more _ordinary_ there are a few special sequences which put some keys near their most common traditional locations. The Special Shift layer is mostly used to lock the shift keys but in order to make this layout more _ordinary_ there are a few special sequences which put some keys near their most common traditional locations.
### Escape ### #### Escape ####
The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. The One True Location for an Escape key is separated from the rest of the keys, way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location, however, and the nearest one is home to the tilde (er, *grave*) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape.
The Ordinary layout offers as a consolation prize a Special sequence for Escape: Special Shift + 1. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers. The Ordinary layout offers as a consolation prize, a Special sequence for Escape: **Special Shift + 1**. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers.
### Backspace ### #### Backspace ####
At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence using the 0 key to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. At the top right corner of the Ergodox EZ you can do **Special Shift + 0** to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times.
### Other Characters ### #### Other Characters ####
The Escape and Backspace special sequences are so useful why not have a few more? You can find dash under 9, left bracket under o, and right bracket under p. That's pretty much all the characters from the top right corner of the keyboard which moved to make room for the columnar layout. The Escape and Backspace special sequences are so useful why not have a few more? You can find dash under 9, left bracket under o, and right bracket under p. That's pretty much all the characters from the top right corner of the keyboard which moved to make room for the columnar layout.
## Errata ##
Some of the symbols on the Symbols layer are produced by the keyboard by "capitalizing" another character (such as *!* from *1*) so when you type that key you will notice the Capitals Shift red LED turn on.
**** ****
The Ordinary Layout for the Ergodox EZ keyboard, v4.20 The Ordinary Layout for the Ergodox EZ keyboard, v5
Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com
No rights reserved. This software is in the public domain. Credit me if you are friendly but if you're a jerk don't bother. No rights reserved. This software is in the public domain. Credit me if you are friendly but if you're a jerk don't bother.
Keyboard layout images were created with http://www.keyboard-layout-editor.com/ by Ian Prest my thanks to that free service
Details: readme.md Details: readme.md
https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary

View file

@ -205,6 +205,7 @@ void matrix_init_user(void) {
// Runs constantly in the background, in a loop. // Runs constantly in the background, in a loop.
void matrix_scan_user(void) { void matrix_scan_user(void) {
__attribute__ ((unused))
uint32_t layer0 = layer_state & (1UL << 0), uint32_t layer0 = layer_state & (1UL << 0),
layer1 = layer_state & (1UL << 1), layer1 = layer_state & (1UL << 1),
layer2 = layer_state & (1UL << 2), layer2 = layer_state & (1UL << 2),

View file

@ -100,7 +100,7 @@ for the left and right halves seperately. To flash them:
- Install the firmware with `sudo make infinity-keymapname-dfu-util` - Install the firmware with `sudo make infinity-keymapname-dfu-util`
- Build left hand firmware with `make infinity-keymapname MASTER=right` - Build right hand firmware with `make infinity-keymapname MASTER=right`
- Plug in the right hand keyboard only. - Plug in the right hand keyboard only.

View file

@ -0,0 +1,112 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,20 @@
Unxmaal's GH60 Layout
=====================
* Mostly stolen from /u/robotmaxtron
##Quantum MK Firmware
For the full Quantum feature list, see the parent readme.md.
* Standard Mac ANSI layout
* Spacebar acts as space when tapped, Fn when held
* Menu acts as menu when tapped, Fn2 when held
* Layer1:
* Top row = `~, F1-F12, Del
* JKIL = arrow cluster
* Layer2:
* Top row = media controls
* JKIL = PgDn/Up/Home/Insert
* Backspace = Reset
### Additional Credits
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.

Binary file not shown.

After

Width:  |  Height:  |  Size: 1,015 KiB

View file

@ -0,0 +1,190 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* RGB Underglow
* These settings are for the F4 by default:
*
*
* #define ws2812_PORTREG PORTF
* #define ws2812_DDRREG DDRF
* #define ws2812_pin PF4
* #define RGBLED_NUM 14 // Number of LEDs
* #define RGBLIGHT_HUE_STEP 10
* #define RGBLIGHT_SAT_STEP 17
* #define RGBLIGHT_VAL_STEP 17
*
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
*/
/* Deprecated code below
#define ws2812_PORTREG PORTF
#define ws2812_DDRREG DDRF
#define ws2812_pin PF4
*/
#define RGB_DI_PIN F4
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View file

@ -0,0 +1,228 @@
#include "gh60.h"
#include "action_layer.h"
#define _BL 0
#define _AL 1
#define _FL 2
#define _UL 3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* ANSI Base, Mac style
* ,-----------------------------------------------------------------------------.
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
* |-----------------------------------------------------------------------------|
* |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
* |-----------------------------------------------------------------------------|
* |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
* |-----------------------------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
* |-----------------------------------------------------------------------------|
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
* `-----------------------------------------------------------------------------'
*/
[_BL] = KEYMAP(
KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \
KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL),
/*
* Pok3r style arrow cluster
* ,-----------------------------------------------------------.
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
* |-----------------------------------------------------------|
* | | | | | | | | |Up| | | | | |
* |-----------------------------------------------------------|
* | | | | | | | |Left|Down|Right| | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_AL] = KEYMAP(
KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
* Secondary function layer
* ,-------------------------------------------------------------.
* | | | | | | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset |
* |-------------------------------------------------------------|
* | | | | | | | | | |PgUp| | | | |
* |-------------------------------------------------------------|
* | | | | | | | |Home|PgDown|End| | | |
* |-------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-------------------------------------------------------------|
* | | | | | | | | |
* `-------------------------------------------------------------'
*/
[_FL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
* Locking layer for controlling the underglow.
* NOTE: currently unused.
*
* ,-----------------------------------------------------------.
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | |On|Mode| | | | | | | | | | |
* |-----------------------------------------------------------|
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | |
* |-----------------------------------------------------------|
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[_UL] = KEYMAP(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
};
enum function_id {
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
SHIFT_ESC,
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay
[1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay
[2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
[3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay
[4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
[6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
[12] = ACTION_FUNCTION(SHIFT_ESC),
[13] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_scan_user(void) {
// Layer LED indicators
// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
uint32_t layer = layer_state;
if (layer & (1<<1)) {
gh60_wasd_leds_on();
} else {
gh60_wasd_leds_off();
}
if (layer & (1<<2)) {
gh60_esc_led_on();
} else {
gh60_esc_led_off();
}
};
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
case RGBLED_TOGGLE:
//led operations
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
static uint8_t shift_esc_shift_mask;
// Shift + ESC = ~
case SHIFT_ESC:
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
if (record->event.pressed) {
if (shift_esc_shift_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (shift_esc_shift_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
};

View file

@ -1,14 +1,24 @@
#include "gonnerd.h" #include "gonnerd.h"
// Keymap layers #define __x__ KC_NO
// Keymap layers
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP_60( /* Base */ [0] = KEYMAP_60( /* Base */
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NO, KC_ENT, \ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \
KC_LSFT,KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \ KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(1), KC_RCTL), KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL \
),
[1] = KEYMAP_60( /* System layer to have access to RESET button */
RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \
),
}; };
const uint16_t PROGMEM fn_actions[] = { const uint16_t PROGMEM fn_actions[] = {

View file

@ -23,11 +23,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------' * `-----------------------------------------------------------'
*/ */
[BASE_LAYER] = KEYMAP_60( [BASE_LAYER] = KEYMAP_60(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \ MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \
KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \ KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(3), KC_RCTL \ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(2), KC_RCTL \
), ),
/* Layer 1: Function Layer /* Layer 1: Function Layer
@ -45,10 +45,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/ */
[FUNCTION_LAYER] = KEYMAP_60( [FUNCTION_LAYER] = KEYMAP_60(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
__x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \ __x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \
KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \ KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \
KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \
), ),
/* Layer 2: System Layer /* Layer 2: System Layer
@ -69,10 +69,40 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \ __x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \
), ),
}; };
const uint16_t PROGMEM fn_actions[] = { enum function_id {
ESC_GRV, // Makes Esc behave like `~ when pressed with the left GUI modifier. This is the "switch between windows of the same application" key combination in macOS
}; };
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(ESC_GRV),
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
static uint8_t esc_grv_mask;
switch (id) {
case ESC_GRV:
esc_grv_mask = get_mods() & MOD_BIT(KC_LGUI);
if (record->event.pressed) {
if (esc_grv_mask) {
add_key(KC_GRV);
send_keyboard_report();
} else {
add_key(KC_ESC);
send_keyboard_report();
}
} else {
if (esc_grv_mask) {
del_key(KC_GRV);
send_keyboard_report();
} else {
del_key(KC_ESC);
send_keyboard_report();
}
}
break;
}
}

View file

@ -11,6 +11,10 @@ It is possible to change the bootloader of the GON NerD with an ISP programmer.
_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will _After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
not work anymore. You will lose your warranty and official support from GON!_ not work anymore. You will lose your warranty and official support from GON!_
## Reset button
To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins.
## Building ## Building
Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.

View file

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../../Makefile
endif

View file

@ -0,0 +1,20 @@
Magicforce 68 Handwired
=======================
This firmware is for a Magicforce 68 that's had its PCB removed and is handwired with an Arduino Micro. NOTE: The Arduino Micro is different than the Arduino *Pro* Micro.
## Wiring Layout
![Wiring Layout](wiring-layout.png)
## Pinout
The following pins are used:
- Columns 1-15: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6
- Rows 1-5: F0, F1, F4, F5, F6
## Compiling and loading the firmware
To build the firmware, run `make`.
To flash the firemware onto the microcontroller, run `make avrdude`, and press the reset button.

View file

@ -0,0 +1,162 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Hexwire
#define PRODUCT Magicforce 68
#define DESCRIPTION Handwired Magicforce 68
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
#define MATRIX_COL_PINS { B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,67 @@
#include "magicforce68.h"
#define _QWERTY 0
#define _FN1 1
#define _FN2 2
#define KC_ KC_TRNS
#define KC_X0 LT(_FN2, KC_GRV)
#define KC_X1 MO(_FN1)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = KEYMAP(
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP,
/*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| |----`----| */
TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN,
/*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| `----`----' */
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER ,
/*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| ,----. */
LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP ,
/*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */
LCTL ,LGUI ,LALT , SPACE , X1 ,RALT ,RCTL , LEFT,DOWN,RGHT
/*`-----+-----+-----+------------------------------+------+-----+-----' `----+----+----' */
),
[_FN1] = KEYMAP(
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME,
/*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */
, , , UP , , , , , , , , , , , VOLD,END,
/*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */
, ,LEFT,DOWN,RGHT, , , , , , , , ,
/*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */
, , , , , , ,MUTE, , , , , MUTE,
/*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
, , , , , , , MPRV,MPLY,MNXT
/*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */
),
[_FN2] = KEYMAP(
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */
GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME,
/*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */
, , , UP , , , , 7 , 8 , 9 , , , , , VOLD,END,
/*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */
, ,LEFT,DOWN,RGHT, , , 4 , 5 , 6 , , , ,
/*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */
, , , , , , 0 , 1 , 2 , 3 , , , MUTE,
/*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */
, , , , , , , MPRV,MPLY,MNXT
/*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */
)
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};

View file

@ -0,0 +1,8 @@
#include "magicforce68.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}

View file

@ -0,0 +1,20 @@
#ifndef MAGICFORCE68_H
#define MAGICFORCE68_H
#include "quantum.h"
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K2E, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K3E, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
}
#endif

View file

@ -0,0 +1,83 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= no # USB Nkey Rollover
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
ifndef QUANTUM_DIR
include ../../../Makefile
endif
avrdude: build
ls /dev/tty* > /tmp/1; \
echo "Reset your Pro Micro now"; \
while [[ -z $$USB ]]; do \
sleep 1; \
ls /dev/tty* > /tmp/2; \
USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
done; \
avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
.PHONY: avrdude

Binary file not shown.

After

Width:  |  Height:  |  Size: 72 KiB

View file

@ -152,6 +152,110 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
#define PS2_INIT_DELAY 2000
#define BATTERY_PIN 9
#define BATTERY_POLL 30000
#define MAX_VOLTAGE 4.2
#define MIN_VOLTAGE 3.2
#define KEYMAP( \
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \
) \
{ \
{k11, k12, k13, k14, k15, k16}, \
{k21, k22, k23, k24, k25, k26}, \
{k31, k32, k33, k34, k35, k36}, \
{k41, k42, k43, k44, k45, k46}, \
{k17, k18, k19, k1a, k1b, k1c}, \
{k27, k28, k29, k2a, k2b, k2c}, \
{k37, k38, k39, k3a, k3b, k3c}, \
{k47, k48, k49, k4a, k4b, k4c} \
}
#ifndef __ASSEMBLER__ // assembler doesn't like enum in .h file
enum led_sequence {
LED_IND_BLUETOOTH,
LED_IND_USB,
LED_IND_BATTERY,
LED_IND_FUN,
LED_IND_NUM,
LED_IND_EMOJI,
LED_BKSP,
LED_ENT,
LED_RSFT,
LED_RCTL,
LED_RGUI,
LED_SLSH,
LED_SCLN,
LED_P,
LED_O,
LED_L,
LED_DOT,
LED_RALT,
LED_EMOJI,
LED_COMM,
LED_K,
LED_I,
LED_U,
LED_J,
LED_M,
LED_FUN,
LED_RSPC,
LED_N,
LED_HH,
LED_Y,
LED_TRACKPOINT3,
LED_TRACKPOINT2,
LED_TRACKPOINT1,
LED_LSPC,
LED_B,
LED_G,
LED_T,
LED_R,
LED_F,
LED_V,
LED_NUM,
LED_PUNC,
LED_C,
LED_D,
LED_E,
LED_W,
LED_S,
LED_X,
LED_LALT,
LED_LGUI,
LED_Z,
LED_A,
LED_Q,
LED_TAB,
LED_ESC,
LED_LSFT,
LED_LCTL,
LED_TOTAL
};
#define RGB_DI_PIN B5
#define RGBSPS_NUM LED_TOTAL
#endif
/* PS/2 mouse */ /* PS/2 mouse */
#ifdef PS2_USE_BUSYWAIT #ifdef PS2_USE_BUSYWAIT
# define PS2_CLOCK_PORT PORTD # define PS2_CLOCK_PORT PORTD

View file

@ -0,0 +1,44 @@
Priyadi Keymap for Planck-like Keyboards
========================================
Main layer modifications from default Planck layout:
* Enter moved to quotes position
* Quotes moved to semicolon position.
* QWERTZ style colon & semicolon. shift-. = : shift-, = ; This is done in hardware, no layout switching needed in software.
* < & > occupied precious real estate, and so they are moved down to punctuation layer.
* Right-shift on Enter position.
* Removed arrow keys, they are on another layer now.
* Put Ctrl-Alt-Super and Super-AltGr-Ctrl in left & right corners.
* Lower & Raise is now called Num and Fun.
* OS & Left keys become another thumb modifier: Empty & Greek (Empty because I used this for another use and my muscle memory is not adapted to it yet)
On Promethium, Trackpoint is enabled on PD2 and PD3. We impersonate a Thinkpad keyboard to be able to use Thinkpad driver on Windows (still needs verification).
AltGr & Compose dual use key. Tap for Compose (mapped to Scroll Lock in hardware) and press for AltGr.
Supported layouts: QWERTY, DVORAK, Colemak, Workman, Norman. Switchable from SYS layer. In DVORAK, semicolon is replaced by /? key.
Num activates NUM layer: hexkeypad on the right side and most punctuation on the left side. Hexkeypad is optimized for C-style hex, IPv6, HTML RGB triplets, etc.
Fun activates FUN layer: arrow cluster on right home row, F-numbers on left side.
Pressing Num+Fun activates PUNC layer: same punctuations as NUM layer on the left side, parens on the right side.
Greek activates either GREEKU or GREEKL layer, depending whether shift is pressed or not. Shift state changes are also taken into account when the layer is active.
Greek+Empty activates EMOJI layer. The whole keyboard now outputs emojis!
Pressing both spacebars (spacekeys, actually) activates GUI layer. QWERTYUIOP switches to a virtual desktop. J & L switches virtual desktop to the left or right. S & F behaves like Alt-Tab and Alt-Shift-Tab. This works by sending Alt press when entering the layer, and Alt release when other than S or F keys are pressed.
Pressing both Ctrls activates SYS layer for configuring the keyboard.
On Promethium, USB or Bluetooth output is detected on startup. If USB is connected, then USB is used initially. SYS-U and SYS-B switch output to USB or Bluetooth at runtime. Current active output is indicated with LEDs.
SYS-W, SYS-L, SYS-M switch Unicode input method. SYS-Q, SYS-D, SYS-C, SYS-K, SYS-N switch to QWERTY, DVORAK, Colemak, Workman and Norman, respectively.
On Planck, SYS-A (mnemonic: audio) toggles faux clicky: use buzzer to emit clicks on key presses and releases.
On Promethium there are 6 indicator LEDs, and under switch LEDs on each switches, including Trackpoint buttons. Totaling 57 LEDs. Output is limited to 0xF for each LEDs to conserve power. SYS-G (mnemonic: glow) toggles various backlighting modes.
On Promethium, there's a LED to indicate battery level. Hue indicates level: green is full, red is empty.

View file

@ -3,6 +3,8 @@
#include "../../config.h" #include "../../config.h"
#define PRIYADI_PROMETHIUM
/* bootmagic salt key */ /* bootmagic salt key */
#define BOOTMAGIC_KEY_SALT KC_ESC #define BOOTMAGIC_KEY_SALT KC_ESC
@ -11,8 +13,9 @@
#define PREVENT_STUCK_MODIFIERS #define PREVENT_STUCK_MODIFIERS
#define RGB_DI_PIN B5 #define RGBSPS_ENABLE
#define RGBSPS_NUM 57
#define UNICODE_TYPE_DELAY 0
#define LAYOUT_DVORAK #define LAYOUT_DVORAK
#define LAYOUT_COLEMAK #define LAYOUT_COLEMAK
@ -20,5 +23,6 @@
#define LAYOUT_WORKMAN #define LAYOUT_WORKMAN
#define DOUBLESPACE_LAYER_ENABLE #define DOUBLESPACE_LAYER_ENABLE
// #define TOLELOT_ENABLE
#endif #endif

View file

@ -1,14 +1,44 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, /*
// this is the style you want to emulate. Copyright 2017 Priyadi Iman Nurcahyo
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#if defined(PRIYADI_PROMETHIUM)
#include "promethium.h"
#elif defined(PRIYADI_PLANCK)
#include "planck.h"
#else
#error "no keyboard defined"
#endif
#include "promethium.h"
#include "action_layer.h" #include "action_layer.h"
#ifdef AUDIO_ENABLE
#include "audio.h"
#include "musical_notes.h"
#endif
#include "eeconfig.h" #include "eeconfig.h"
#include "process_unicode.h" #include "process_unicode.h"
#include "quantum.h" #include "quantum.h"
#ifdef RGBSPS_ENABLE
#include "rgbsps.h" #include "rgbsps.h"
#endif
#ifdef PS2_MOUSE_ENABLE
#include "ps2_mouse.h" #include "ps2_mouse.h"
#include "ps2.h" #include "ps2.h"
#endif
#ifdef FAUXCLICKY_ENABLE
#include "fauxclicky.h"
#endif
#include "outputselect.h" #include "outputselect.h"
#include "led.h" #include "led.h"
#define COUNT(x) (sizeof (x) / sizeof (*(x))) #define COUNT(x) (sizeof (x) / sizeof (*(x)))
@ -21,8 +51,10 @@
#define KC_WWWF KC_WWW_FORWARD #define KC_WWWF KC_WWW_FORWARD
// hybrid right-alt & scroll lock (mapped to Compose in OS) // hybrid right-alt & scroll lock (mapped to Compose in OS)
#undef KC_RALT #define C_RALT MT(MOD_RALT, KC_SLCK)
#define KC_RALT MT(MOD_RALT, KC_SLCK)
// dual use right-shift & del key
// #define C_RSFT MT(MOD_RSFT, KC_DEL)
bool capslock = false; bool capslock = false;
#ifdef DOUBLESPACE_LAYER_ENABLE #ifdef DOUBLESPACE_LAYER_ENABLE
@ -41,25 +73,29 @@ enum glow_modes {
}; };
uint8_t glow_mode = GLOW_MIN; uint8_t glow_mode = GLOW_MIN;
void turn_off_capslock(void);
extern keymap_config_t keymap_config; extern keymap_config_t keymap_config;
// layers, ordering is important!
enum layers { enum layers {
_QWERTY, _QWERTY,
_DVORAK, _DVORAK,
_COLEMAK, _COLEMAK,
_WORKMAN, _WORKMAN,
_NORMAN, _NORMAN,
_DEFAULT_LAYER_MAX = _NORMAN,
_PUNC,
_NUM,
_FUNC,
_GREEKU, _GREEKU,
_GREEKL, _GREEKL,
_NUM,
_FUN,
_PUNC,
_EMPTY,
_EMOJI, _EMOJI,
_GUI, _GUI,
_SYS, _SYS
}; };
// double-space layer // double-space layer
@ -74,9 +110,6 @@ enum planck_keycodes {
NORMAN, NORMAN,
// layer switchers // layer switchers
PUNC,
NUM,
FUNC,
EMOJI, EMOJI,
GUI, GUI,
GREEK, GREEK,
@ -90,9 +123,22 @@ enum planck_keycodes {
LSPACE, LSPACE,
RSPACE, RSPACE,
GLOW, GLOW,
AUDIO
// stub
#ifndef FAUXCLICKY_ENABLE
FC_TOG,
#endif
#ifndef ADAFRUIT_BLE_ENABLE
OUT_BLE,
#endif
KEYCODE_END
}; };
#define EMPTY MO(_EMPTY)
#define NUM MO(_NUM)
#define FUN MO(_FUN)
#define FUN0 LT(_FUN, KC_0)
// unicode map // unicode map
enum unicode_name { enum unicode_name {
@ -196,6 +242,11 @@ enum unicode_name {
LOMEG, LOMEG,
FSIGM, FSIGM,
LTEQ,
GTEQ,
NOTEQ,
PLMIN,
}; };
const uint32_t PROGMEM unicode_map[] = { const uint32_t PROGMEM unicode_map[] = {
@ -297,10 +348,17 @@ const uint32_t PROGMEM unicode_map[] = {
[LPSI] = 0x03C8, [LPSI] = 0x03C8,
[LOMEG] = 0x03C9, [LOMEG] = 0x03C9,
[FSIGM] = 0x03C2, [FSIGM] = 0x03C2,
// other
[LTEQ] = 0x2264, // less than or equal
[GTEQ] = 0x2265, // greater than or equal
[NOTEQ] = 0x2260, // not equal
[PLMIN] = 0xB1, // plus minus
}; };
// RGBSPS // RGBSPS
#ifdef RGBSPS_ENABLE
const uint8_t PROGMEM LED_ALNUM[] = { const uint8_t PROGMEM LED_ALNUM[] = {
LED_Z, LED_Z,
LED_A, LED_A,
@ -365,14 +423,14 @@ const uint8_t PROGMEM LED_MODS[] = {
const uint8_t PROGMEM LED_FN[] = { const uint8_t PROGMEM LED_FN[] = {
LED_PUNC, LED_PUNC,
LED_NUM, LED_NUM,
LED_FUNC, LED_FUN,
LED_EMOJI LED_EMOJI
}; };
const uint8_t PROGMEM LED_INDICATORS[] = { const uint8_t PROGMEM LED_INDICATORS[] = {
LED_IND_EMOJI, LED_IND_EMOJI,
LED_IND_NUM, LED_IND_NUM,
LED_IND_FUNC, LED_IND_FUN,
LED_IND_BATTERY, LED_IND_BATTERY,
LED_IND_USB, LED_IND_USB,
LED_IND_BLUETOOTH, LED_IND_BLUETOOTH,
@ -431,7 +489,7 @@ void led_reset(void) {
void led_set_layer_indicator(void) { void led_set_layer_indicator(void) {
static uint8_t oldlayer = 255; static uint8_t oldlayer = 255;
rgbsps_set(LED_IND_FUNC, 0, 0, 0); rgbsps_set(LED_IND_FUN, 0, 0, 0);
// rgbsps_set(LED_IND_NUM, 0, 0, 0); // rgbsps_set(LED_IND_NUM, 0, 0, 0);
rgbsps_set(LED_IND_EMOJI, 0, 0, 0); rgbsps_set(LED_IND_EMOJI, 0, 0, 0);
@ -444,14 +502,14 @@ void led_set_layer_indicator(void) {
oldlayer = layer; oldlayer = layer;
if (layer <= _NORMAN) { if (layer <= _DEFAULT_LAYER_MAX) {
rgbsps_send(); rgbsps_send();
return; return;
} }
switch(layer) { switch(layer) {
case _FUNC: case _FUN:
rgbsps_set(LED_IND_FUNC, 15, 0, 0); rgbsps_set(LED_IND_FUN, 15, 0, 0);
break; break;
// case _NUM: // case _NUM:
// rgbsps_set(LED_IND_NUM, 0, 0, 15); // rgbsps_set(LED_IND_NUM, 0, 0, 15);
@ -460,8 +518,8 @@ void led_set_layer_indicator(void) {
rgbsps_set(LED_IND_EMOJI, 15, 15, 0); rgbsps_set(LED_IND_EMOJI, 15, 15, 0);
break; break;
default: default:
rgbsps_set(LED_IND_FUNC, 3, 3, 3); rgbsps_set(LED_IND_FUN, 3, 3, 3);
rgbsps_set(LED_IND_NUM, 3, 3, 3); // rgbsps_set(LED_IND_NUM, 3, 3, 3);
rgbsps_set(LED_IND_EMOJI, 3, 3, 3); rgbsps_set(LED_IND_EMOJI, 3, 3, 3);
} }
@ -495,7 +553,7 @@ void led_init(void) {
rgbsps_set(LED_TRACKPOINT2, 0, 0, 15); rgbsps_set(LED_TRACKPOINT2, 0, 0, 15);
rgbsps_set(LED_TRACKPOINT3, 15, 0, 0); rgbsps_set(LED_TRACKPOINT3, 15, 0, 0);
} }
#endif // RGBSPS_ENABLE
// keymaps // keymaps
@ -509,14 +567,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | Alt | GUI | Punc | Num | Space | Func |Greek | GUI |AltGr | Ctrl | * | Ctrl | Alt | GUI | Punc | Num | Space | Fun |Greek | GUI |AltGr | Ctrl |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_QWERTY] = KEYMAP( [_QWERTY] = KEYMAP(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT , KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT ,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LCTL, KC_LALT, KC_LGUI, PUNC, NUM, LSPACE, RSPACE, FUNC, GREEK, KC_RGUI, KC_RALT, KC_RCTL KC_LCTL, KC_LALT, KC_LGUI, EMPTY, NUM, LSPACE, RSPACE, FUN, GREEK, KC_RGUI, C_RALT, KC_RCTL
), ),
/* Dvorak /* Dvorak
@ -604,56 +662,56 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Punc /* Punc
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | ` | * | ~ | ! | @ | # | $ | % | ^ | & | * | | | ` |
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | | * | \ | - | = | / | | ( | ) | < | > | | * | | * | \ | - | = | / | | ( | ) | < | > | |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | & | ^ | | | _ | + | ? | | [ | ] | { | } | : | * | & | ^ | | | _ | + | ? | ± | [ | ] | { | } | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | * | | | | | | | | | | : | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_PUNC] = KEYMAP( [_PUNC] = KEYMAP(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_GRV , KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, X(LTEQ), X(GTEQ), _______,
XXXXXXX, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, XXXXXXX, KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, XXXXXXX, KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, X(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______,
KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, XXXXXXX, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, KC_COLN, KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, X(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______
), ),
/* Num /* Num
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | A | 7 | 8 | 9 | D | ` | * | ~ | ! | @ | # | $ | % | A | 7 | 8 | 9 | D | |
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | | * | \ | - | = | / | B | 4 | 5 | 6 | E | | * | ` | * | \ | - | = | / | B | 4 | 5 | 6 | E | |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | & | ^ | | | _ | + | ? | C | 1 | 2 | 3 | F | : | * | & | ^ | | | _ | + | ? | C | 1 | 2 | 3 | F | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | x | 0 | , | . | | | * | | | x | | | | | 0 | , | . | : | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_NUM] = KEYMAP( [_NUM] = KEYMAP(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, S(KC_A), KC_7, KC_8, KC_9, S(KC_D), KC_GRV, KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, S(KC_A), KC_7, KC_8, KC_9, S(KC_D), _______,
XXXXXXX, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, S(KC_B), KC_4, KC_5, KC_6, S(KC_E), _______, KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, S(KC_B), KC_4, KC_5, KC_6, S(KC_E), _______,
KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, S(KC_C), KC_1, KC_2, KC_3, S(KC_F), KC_COLN, KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, S(KC_C), KC_1, KC_2, KC_3, S(KC_F), _______,
_______, _______, _______, _______, _______, _______, _______, KC_0, KC_COMM, KC_DOT, KC_X, _______ _______, _______, KC_X, _______, _______, _______, _______, FUN0 , KC_COMM, KC_DOT, KC_COLN, _______
), ),
/* Func /* Func
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | | F1 | F2 | F3 | F4 | | | PgUp | Up | PgDn | PgUp | Del | * | | F1 | F2 | F3 | F4 | Ins | | PgUp | Up | PgDn | PgUp | |
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | Ins | * | Caps | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F9 | F10 | F11 | F12 | | | | Home | End | | | * | | F9 | F10 | F11 | F12 |Pause | | | Home | End | | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | * | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_FUNC] = KEYMAP( [_FUN] = KEYMAP(
XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_INS, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL,
XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8,KC_PSCREEN,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_INS, KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, KC_PSCR, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______,
_______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______, _______, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
), ),
/* Uppercase Greek /* Uppercase Greek
@ -668,9 +726,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_GREEKU] = KEYMAP( [_GREEKU] = KEYMAP(
_______, _______, _______,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______, _______, XXXXXXX, XXXXXXX,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______,
_______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), _______, _______, _______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), KC_QUOT, _______,
_______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), _______, _______, _______, _______, _______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), KC_COMM, KC_DOT, KC_SLSH, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
), ),
@ -686,9 +744,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_GREEKL] = KEYMAP( [_GREEKL] = KEYMAP(
_______, _______,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______, _______, XXXXXXX,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______,
_______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), _______, _______, _______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), KC_QUOT, _______,
_______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), _______, _______, _______, _______, _______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), KC_COMM, KC_DOT, KC_SLSH, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
/* Empty
* ,-----------------------------------------------------------------------------------.
* | | | | | | | | | | | | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_EMPTY] = KEYMAP(
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
), ),
@ -707,14 +783,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW), X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW),
X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS), X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS),
X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH), X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH),
X(POO), X(EYES), _______,X(HUNRD), X(SKULL),X(HORNS), X(HALO), X(FEAR),X(YUMMY),_______,X(DISAP),X(NOEVK) X(POO), X(EYES), X(HUNRD),_______, X(SKULL),X(HORNS), X(HALO), X(FEAR),_______,X(YUMMY),X(DISAP),X(NOEVK)
), ),
/* GUI /* GUI
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | | * | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | |
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | Vol- | Mute | Vol+ | | | Prev | | Next | | | * | Esc | | Btab | Esc | Tab | | | Prev | | Next | | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | Prev | Play | Next | | | | | | | | * | | | Prev | Play | Next | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
@ -723,9 +799,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/ */
[_GUI] = KEYMAP( [_GUI] = KEYMAP(
XXXXXXX, G(KC_1), G(KC_2), G(KC_3), G(KC_4), G(KC_5), G(KC_6), G(KC_7), G(KC_8), G(KC_9), G(KC_0), XXXXXXX, XXXXXXX, G(KC_1), G(KC_2), G(KC_3), G(KC_4), G(KC_5), G(KC_6), G(KC_7), G(KC_8), G(KC_9), G(KC_0), XXXXXXX,
XXXXXXX, XXXXXXX, KC_VOLD, KC_MUTE, KC_VOLU, XXXXXXX, XXXXXXX, KC_WWWB, XXXXXXX, KC_WWWF, XXXXXXX, XXXXXXX, KC_ESC, XXXXXXX, S(KC_TAB),KC_ESC, KC_TAB, XXXXXXX, XXXXXXX, KC_WWWB, XXXXXXX, KC_WWWF, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, KC_SPC, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD, KC_MUTE, KC_VOLU, KC_SPC, KC_SPC, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
), ),
/* Sys /* Sys
@ -741,11 +817,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/ */
[_SYS] = KEYMAP( [_SYS] = KEYMAP(
XXXXXXX, QWERTY, WIN, XXXXXXX, RESET, XXXXXXX, XXXXXXX, OUT_USB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QWERTY, WIN, XXXXXXX, RESET, XXXXXXX, XXXXXXX, OUT_USB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, AUDIO, XXXXXXX, DVORAK, XXXXXXX, GLOW, XXXXXXX, XXXXXXX, WORKMAN, LINUX, XXXXXXX, XXXXXXX, XXXXXXX, FC_TOG, XXXXXXX, DVORAK, XXXXXXX, GLOW, XXXXXXX, XXXXXXX, WORKMAN, LINUX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, OUT_BLE, NORMAN, OSX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, OUT_BLE, NORMAN, OSX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______ _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______
), ),
}; };
void persistant_default_layer_set(uint16_t default_layer) { void persistant_default_layer_set(uint16_t default_layer) {
@ -753,9 +830,63 @@ void persistant_default_layer_set(uint16_t default_layer) {
default_layer_set(default_layer); default_layer_set(default_layer);
} }
#ifdef DOUBLESPACE_LAYER_ENABLE
void process_doublespace(bool pressed, bool *isactive, bool *otheractive, bool *isemitted) {
if (pressed) {
*isactive = true;
if (*otheractive) {
layer_on(_SPACE);
register_code(KC_LALT); // sends alt and enter layer
space_layer_entered = true;
}
} else {
*isactive = false;
if (space_layer_entered) {
unregister_code(KC_LALT); // release alt and exit layer
layer_off(_SPACE);
if (!*otheractive) {
space_layer_entered = false;
}
} else {
if (!*isemitted) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
*isemitted = false;
}
}
}
#endif
uint32_t layer_state_set_kb(uint32_t state)
{
// turn on punc layer if both fun & num are on
if ((state & ((1UL<<_NUM) | (1UL<<_FUN))) == ((1UL<<_NUM) | (1UL<<_FUN))) {
state |= (1UL<<_PUNC);
} else {
state &= ~(1UL<<_PUNC);
}
// turn on emoji layer if empty and greek layer are on
if (
(state & ((1UL<<_EMPTY) | (1UL<<_GREEKU))) == ((1UL<<_EMPTY) | (1UL<<_GREEKU))
|| (state & ((1UL<<_EMPTY) | (1UL<<_GREEKL))) == ((1UL<<_EMPTY) | (1UL<<_GREEKL))
) {
state |= (1UL<<_EMOJI);
} else {
state &= ~(1UL<<_EMOJI);
}
return state;
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) { bool process_record_user(uint16_t keycode, keyrecord_t *record) {
bool lshift = keyboard_report->mods & MOD_BIT(KC_LSFT); static bool lshift = false;
bool rshift = keyboard_report->mods & MOD_BIT(KC_RSFT); static bool rshift = false;
static uint8_t layer = 0;
lshift = keyboard_report->mods & MOD_BIT(KC_LSFT);
rshift = keyboard_report->mods & MOD_BIT(KC_RSFT);
layer = biton32(layer_state);
#ifdef DOUBLESPACE_LAYER_ENABLE #ifdef DOUBLESPACE_LAYER_ENABLE
// double-space: send space immediately if any other key depressed before space is released // double-space: send space immediately if any other key depressed before space is released
@ -779,6 +910,14 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
rspace_emitted = true; rspace_emitted = true;
} }
} }
if (layer == _SPACE && keycode != S(KC_TAB) && keycode != KC_TAB && keycode != KC_ESC && keycode != XXXXXXX) {
if (record->event.pressed) {
unregister_code(KC_LALT);
} else {
register_code(KC_LALT);
}
}
#endif #endif
switch (keycode) { switch (keycode) {
@ -786,61 +925,19 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
#ifdef DOUBLESPACE_LAYER_ENABLE #ifdef DOUBLESPACE_LAYER_ENABLE
// double-space enter space layer // double-space enter space layer
case LSPACE: case LSPACE:
if (record->event.pressed) { process_doublespace(record->event.pressed, &lspace_active, &rspace_active, &lspace_emitted);
lspace_active = true;
if (rspace_active) {
layer_on(_SPACE);
space_layer_entered = true;
}
} else {
lspace_active = false;
if (space_layer_entered) {
layer_off(_SPACE);
if (!rspace_active) {
space_layer_entered = false;
}
} else {
if (!lspace_emitted) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
lspace_emitted = false;
}
}
return false; return false;
break; break;
case RSPACE: case RSPACE:
if (record->event.pressed) { process_doublespace(record->event.pressed, &rspace_active, &lspace_active, &rspace_emitted);
rspace_active = true;
if (lspace_active) {
layer_on(_SPACE);
space_layer_entered = true;
}
} else {
rspace_active = false;
if (space_layer_entered) {
layer_off(_SPACE);
if (!lspace_active) {
space_layer_entered = false;
}
} else {
if (!rspace_emitted) {
register_code(KC_SPC);
unregister_code(KC_SPC);
}
rspace_emitted = false;
}
}
return false; return false;
break; break;
#endif #endif
// handle greek layer shift // handle greek layer shift
// handle both shift = capslock
case KC_LSFT: case KC_LSFT:
case KC_RSFT: case KC_RSFT:
; ;
uint8_t layer = biton32(layer_state);
if (layer == _GREEKU || layer == _GREEKL) { if (layer == _GREEKU || layer == _GREEKL) {
if (record->event.pressed) { if (record->event.pressed) {
layer_on(_GREEKU); layer_on(_GREEKU);
@ -851,13 +948,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
layer_off(_GREEKU); layer_off(_GREEKU);
} }
} }
} else {
if (record->event.pressed) {
if (lshift ^ rshift) { // if only one shift was pressed
register_code(KC_CAPS);
unregister_code(KC_CAPS);
}
}
} }
return true; return true;
break; break;
@ -948,18 +1038,21 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
break; break;
#endif #endif
// layer switcher // only process Fnumber on key release, and only when layer switcher is still pressed.
case PUNC: // this is to avoid accidental presses on potentially destructive keys
if (record->event.pressed) { case KC_F1 ... KC_F12:
layer_on(_PUNC); case KC_PAUS:
update_tri_layer(_PUNC, _GREEKL, _EMOJI); case KC_PSCR:
} else { case KC_INS:
layer_off(_PUNC); if (!record->event.pressed && layer == _FUN) { // key released and still in FUN layer
update_tri_layer(_PUNC, _GREEKL, _EMOJI); register_code(keycode);
unregister_code(keycode);
} }
return false; return false;
break; break;
// layer switcher
//
case GREEK: case GREEK:
if (record->event.pressed) { if (record->event.pressed) {
if (lshift || rshift) { if (lshift || rshift) {
@ -968,31 +1061,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
} else { } else {
layer_on(_GREEKL); layer_on(_GREEKL);
layer_off(_GREEKU); layer_off(_GREEKU);
update_tri_layer(_PUNC, _GREEKL, _EMOJI);
} }
} else { } else {
layer_off(_GREEKU); layer_off(_GREEKU);
layer_off(_GREEKL); layer_off(_GREEKL);
update_tri_layer(_PUNC, _GREEKL, _EMOJI);
}
return false;
break;
case NUM:
if (record->event.pressed) {
turn_off_capslock();
layer_on(_NUM);
} else {
layer_off(_NUM);
}
return false;
break;
case FUNC:
if (record->event.pressed) {
layer_on(_FUNC);
} else {
layer_off(_FUNC);
} }
return false; return false;
break; break;
@ -1012,6 +1084,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
break; break;
// glow mode changer // glow mode changer
#ifdef RGBSPS_ENABLE
case GLOW: case GLOW:
if (record->event.pressed) { if (record->event.pressed) {
glow_mode++; glow_mode++;
@ -1023,16 +1096,20 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
} }
return false; return false;
break; break;
#endif
// faux clicky toggle, TBD // faux clicky indicator
case AUDIO: #ifdef FAUXCLICKY_ENABLE
return false; case FC_TOG:
return true;
break; break;
#endif
} }
return true; return true;
} }
void set_output_user(uint8_t output) { void set_output_user(uint8_t output) {
#ifdef ADAFRUIT_BLE_ENABLE
switch(output) { switch(output) {
case OUTPUT_USB: case OUTPUT_USB:
led_set_output_usb(); led_set_output_usb();
@ -1043,42 +1120,27 @@ void set_output_user(uint8_t output) {
default: default:
led_set_output_none(); led_set_output_none();
} }
#endif
} }
void matrix_init_user(void) { void matrix_init_user() {
_delay_ms(500); // give time for usb to initialize _delay_ms(500); // give time for usb to initialize
set_unicode_input_mode(UC_LNX); set_unicode_input_mode(UC_LNX);
#ifdef RGBSPS_ENABLE
led_init(); led_init();
#endif
// auto detect output on init // auto detect output on init
#ifdef ADAFRUIT_BLE_ENABLE
uint8_t output = auto_detect_output(); uint8_t output = auto_detect_output();
if (output == OUTPUT_USB) { if (output == OUTPUT_USB) {
set_output(OUTPUT_USB); set_output(OUTPUT_USB);
} else { } else {
set_output(OUTPUT_ADAFRUIT_BLE); set_output(OUTPUT_ADAFRUIT_BLE);
} }
} #endif
void matrix_scan_user(void) {
led_set_layer_indicator();
}
void battery_poll(uint8_t level) {
rgbsps_sethsv(LED_IND_BATTERY, level * 120/255, 255, 15);
rgbsps_send();
}
void led_set_user(uint8_t usb_led) {
bool new_capslock = usb_led & (1<<USB_LED_CAPS_LOCK);
if (new_capslock ^ capslock) { // capslock state is different
if (capslock = new_capslock) {
rgbsps_set(LED_IND_NUM, 15, 0, 0);
} else {
rgbsps_set(LED_IND_NUM, 0, 0, 0);
}
rgbsps_send();
}
} }
void turn_off_capslock() { void turn_off_capslock() {
@ -1088,37 +1150,62 @@ void turn_off_capslock() {
} }
} }
void ps2_mouse_init_user() { #ifdef RGBSPS_ENABLE
uint8_t rcv; void matrix_scan_user(void) {
led_set_layer_indicator();
}
// set TrackPoint sensitivity void battery_poll(uint8_t level) {
PS2_MOUSE_SEND(0xE2, "tpsens: 0xE2"); rgbsps_sethsv(LED_IND_BATTERY, level * 120/255, 255, 15);
PS2_MOUSE_SEND(0x81, "tpsens: 0x81"); rgbsps_send();
PS2_MOUSE_SEND(0x4A, "tpsens: 0x4A"); }
PS2_MOUSE_SEND(0x49, "tpsens: 0x59");
// set TrackPoint Negative Inertia factor void led_set_user(uint8_t usb_led) {
PS2_MOUSE_SEND(0xE2, "tpnegin: 0xE2"); bool new_capslock = usb_led & (1<<USB_LED_CAPS_LOCK);
PS2_MOUSE_SEND(0x81, "tpnegin: 0x81"); if (new_capslock ^ capslock) { // capslock state is different
PS2_MOUSE_SEND(0x4D, "tpnegin: 0x4D"); if ((capslock = new_capslock)) {
PS2_MOUSE_SEND(0x06, "tpnegin: 0x06"); rgbsps_set(LED_IND_NUM, 15, 0, 0);
} else {
// set TrackPoint speed rgbsps_set(LED_IND_NUM, 0, 0, 0);
// (transfer function upper plateau speed) }
PS2_MOUSE_SEND(0xE2, "tpsp: 0xE2"); rgbsps_send();
PS2_MOUSE_SEND(0x81, "tpsp: 0x81");
PS2_MOUSE_SEND(0x60, "tpsp: 0x60");
PS2_MOUSE_SEND(0x61, "tpsp: 0x61");
// inquire pts status
rcv = ps2_host_send(0xE2);
rcv = ps2_host_send(0x2C);
rcv = ps2_host_recv_response();
if ((rcv & 1) == 1) {
// if on, disable pts
rcv = ps2_host_send(0xE2);
rcv = ps2_host_send(0x47);
rcv = ps2_host_send(0x2C);
rcv = ps2_host_send(0x01);
} }
} }
#endif
#ifdef PS2_MOUSE_ENABLE
void ps2_mouse_init_user() {
uint8_t rcv;
// set TrackPoint sensitivity
PS2_MOUSE_SEND(0xE2, "tpsens: 0xE2");
PS2_MOUSE_SEND(0x81, "tpsens: 0x81");
PS2_MOUSE_SEND(0x4A, "tpsens: 0x4A");
PS2_MOUSE_SEND(0x49, "tpsens: 0x59");
// set TrackPoint Negative Inertia factor
PS2_MOUSE_SEND(0xE2, "tpnegin: 0xE2");
PS2_MOUSE_SEND(0x81, "tpnegin: 0x81");
PS2_MOUSE_SEND(0x4D, "tpnegin: 0x4D");
PS2_MOUSE_SEND(0x06, "tpnegin: 0x06");
// set TrackPoint speed
// (transfer function upper plateau speed)
PS2_MOUSE_SEND(0xE2, "tpsp: 0xE2");
PS2_MOUSE_SEND(0x81, "tpsp: 0x81");
PS2_MOUSE_SEND(0x60, "tpsp: 0x60");
PS2_MOUSE_SEND(0x61, "tpsp: 0x61");
// inquire pts status
rcv = ps2_host_send(0xE2);
rcv = ps2_host_send(0x2C);
rcv = ps2_host_recv_response();
if ((rcv & 1) == 1) {
// if on, disable pts
rcv = ps2_host_send(0xE2);
rcv = ps2_host_send(0x47);
rcv = ps2_host_send(0x2C);
rcv = ps2_host_send(0x01);
}
}
#endif

View file

@ -36,3 +36,7 @@ void led_set_kb(uint8_t usb_led) {
led_set_user(usb_led); led_set_user(usb_led);
} }
__attribute__ ((weak))
void led_set_user(uint8_t usb_led) {
}

View file

@ -1,108 +1,10 @@
#ifndef PROMETHIUM_H #ifndef PROMETHIUM_H
#define PROMETHIUM_H #define PROMETHIUM_H
#include "quantum.h" #include "stdint.h"
#define PS2_INIT_DELAY 2000 void battery_poll(uint8_t level);
#define UNICODE_TYPE_DELAY 0 void led_set_kb(uint8_t usb_led);
#define BATTERY_PIN 9 void led_set_user(uint8_t usb_led);
#define BATTERY_POLL 30000
#define MAX_VOLTAGE 4.2
#define MIN_VOLTAGE 3.2
#define KEYMAP( \
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \
) \
{ \
{k11, k12, k13, k14, k15, k16}, \
{k21, k22, k23, k24, k25, k26}, \
{k31, k32, k33, k34, k35, k36}, \
{k41, k42, k43, k44, k45, k46}, \
{k17, k18, k19, k1a, k1b, k1c}, \
{k27, k28, k29, k2a, k2b, k2c}, \
{k37, k38, k39, k3a, k3b, k3c}, \
{k47, k48, k49, k4a, k4b, k4c} \
}
enum led_sequence {
LED_IND_BLUETOOTH,
LED_IND_USB,
LED_IND_BATTERY,
LED_IND_FUNC,
LED_IND_NUM,
LED_IND_EMOJI,
LED_BKSP,
LED_ENT,
LED_RSFT,
LED_RCTL,
LED_RGUI,
LED_SLSH,
LED_SCLN,
LED_P,
LED_O,
LED_L,
LED_DOT,
LED_RALT,
LED_EMOJI,
LED_COMM,
LED_K,
LED_I,
LED_U,
LED_J,
LED_M,
LED_FUNC,
LED_RSPC,
LED_N,
LED_HH,
LED_Y,
LED_TRACKPOINT3,
LED_TRACKPOINT2,
LED_TRACKPOINT1,
LED_LSPC,
LED_B,
LED_G,
LED_T,
LED_R,
LED_F,
LED_V,
LED_NUM,
LED_PUNC,
LED_C,
LED_D,
LED_E,
LED_W,
LED_S,
LED_X,
LED_LALT,
LED_LGUI,
LED_Z,
LED_A,
LED_Q,
LED_TAB,
LED_ESC,
LED_LSFT,
LED_LCTL,
};
#endif #endif
void battery_poll(uint8_t level);

View file

@ -14,7 +14,7 @@ extern keymap_config_t keymap_config;
#define _FUNC 4 #define _FUNC 4
#define ENDASH LALT(KC_MINS) #define ENDASH LALT(KC_MINS)
#define POUND LALT(KC_3) #define POUND LALT(KC_3)
#define H(X) LALT(LCTL(X))
enum planck_keycodes { enum planck_keycodes {
MOVE = SAFE_RANGE, MOVE = SAFE_RANGE,
@ -48,19 +48,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* MOVE /* MOVE
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | Esc | | Home | Up | End | | | Home | Up | End | | Esc | * | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del | * | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | | * | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | * | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_MOVE] = { [_MOVE] = {
{KC_ESC, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, KC_ESC }, {H(KC_3), H(KC_F1),H(KC_F2),H(KC_F3),H(KC_F4),H(KC_F5),H(KC_8), KC_HOME, KC_UP, KC_END, H(KC_7), KC_ESC },
{KC_DEL, KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL }, {H(KC_4), H(KC_F6),H(KC_F7),H(KC_F8),H(KC_F9),H(KC_F10),H(KC_9),KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL },
{_______, XXXXXXX, XXXXXXX, KC_PGUP, KC_PGDN, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______}, {_______, H(KC_F11),H(KC_F12),H(KC_0),H(KC_1),H(KC_2), H(KC_A), KC_PGDN, KC_PGUP, H(KC_5), H(KC_6), _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
}, },
@ -114,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_FUNC] = { [_FUNC] = {
{RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU}, {RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU},
{XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_VOLD}, {XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_VOLD},
{_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER, XXXXXXX, XXXXXXX, XXXXXXX, _______}, {_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER,XXXXXXX, XXXXXXX, XXXXXXX, _______},
{_______, _______, _______, _______, KC_MPRV, KC_MUTE, KC_MPLY, KC_MNXT, _______, _______, _______, _______} {_______, _______, _______, _______, KC_MPRV, KC_MUTE, KC_MPLY, KC_MNXT, _______, _______, _______, _______}
} }

View file

@ -6,7 +6,7 @@ This is a layout for the grid planck, built with a few ideals in mind:
- The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible. - The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible.
- There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make. - There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make.
We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster and other movement keys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously. We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster, other movement keys, and hotkeys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously.
``` ```
/* BASE /* BASE
@ -23,11 +23,11 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
/* MOVE /* MOVE
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
* | Esc | | Home | Up | End | | | Home | Up | End | | Esc | * | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del | * | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | | * | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | * | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
@ -68,4 +68,4 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
* | | | | | Prev | Mute | Play | Next | | | | | * | | | | | Prev | Mute | Play | Next | | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
``` ```

View file

@ -1,8 +1,12 @@
#ifndef CONFIG_USER_H #ifndef CONFIG_USER_H
#define CONFIG_USER_H #define CONFIG_USER_H
#ifndef NO_DEBUG
#define NO_DEBUG #define NO_DEBUG
#endif
#ifndef NO_PRINT
#define NO_PRINT #define NO_PRINT
#endif
#include "../../config.h" #include "../../config.h"

View file

@ -102,16 +102,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play | * | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_LOWER] = { [_LOWER] = {
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}, },
/* Raise /* Raise
@ -120,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play | * | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
@ -138,7 +138,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+-------------+------+------+------+------+------| * |------+------+------+------+------+-------------+------+------+------+------+------|
* | | S | T | P | H | * | * | F | P | L | T | D | * | | S | T | P | H | * | * | F | P | L | T | D |
* |------+------+------+------+------+------|------+------+------+------+------+------| * |------+------+------+------+------+------|------+------+------+------+------+------|
* |TogOut| S | K | W | R | * | * | R | B | G | S | Z | * | | S | K | W | R | * | * | R | B | G | S | Z |
* |------+------+------+------+------+------+------+------+------+------+------+------| * |------+------+------+------+------+------+------+------+------+------+------+------|
* | Exit | | | A | O | | E | U | | | | * | Exit | | | A | O | | E | U | | | |
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
@ -163,7 +163,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------' * `-----------------------------------------------------------------------------------'
*/ */
[_ADJUST] = { [_ADJUST] = {
{_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
{_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______},
{_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}

Binary file not shown.

Before

Width:  |  Height:  |  Size: 52 KiB

After

Width:  |  Height:  |  Size: 52 KiB

View file

@ -60,7 +60,7 @@ const uint16_t PROGMEM fn_actions[] = {
[7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS), [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
}; };
// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l // This config can be found at Keyboard layout editor site: https://goo.gl/cF7uIO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = { /* QWERTY */ [_QWERTY] = { /* QWERTY */
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
@ -69,22 +69,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
{KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} {KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
}, },
[_LOWER] = { /* LOWER */ [_LOWER] = { /* LOWER */
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL}, {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_MINS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} {KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
}, },
[_RAISE] = { /* RAISE */ [_RAISE] = { /* RAISE */
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PLUS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, S(KC_COMM), S(KC_DOT), KC_BSLS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}, },
[_CUSTOM] = { /* CUSTOM */ [_CUSTOM] = { /* CUSTOM */
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, CUS4, KC_TRNS, KC_F12, KC_TRNS},
{KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} {BL, RESET, LALT(LCTL(KC_DEL)), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
} }
}; };

View file

@ -3,6 +3,7 @@
"backcolor": "#858585", "backcolor": "#858585",
"name": "Planck 40%", "name": "Planck 40%",
"author": "James Folkert", "author": "James Folkert",
"notes": "# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard\nAdded several custom functions to the keymap from the \"ab\" map. Special thanks to \"mollat\" for demonstration of macros in their keymap.c\n \n\n![Layout](keyboard-layout.png \"Practical Keymap\")\n\n* Online keyboard layout editor: http://goo.gl/mlLAFZ\n\n# Notes\n* Front legend text is the custom layer (both raise and lower)\n* Holding is denoted by down arrow, for example, right shift is an enter button when tapped, shift when held\n* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here\n* I disregarded the advice of Jack and used macros for passwords. I accept my fate.\n* RAISE and LOWER also acts as PgUp and PgDn when tapped.\n* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)\n* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.",
"background": { "background": {
"name": "Aluminium brushed", "name": "Aluminium brushed",
"style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');" "style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');"
@ -19,41 +20,49 @@
2, 2,
2, 2,
0, 0,
2 0
] ]
}, },
"F1\n1\n\n!\n\n\n\n\n\n<i class='kb kb-Tab-2'></i>", "!\n1\n\n\nF1\n\n\n\n\n<i class='kb kb-Tab-2'></i>",
"F2\n2\n\n@\n\n\n\n\n\nQ", "@\n2\n\n\nF2\n\n\n\n\nQ",
"F3\n3\n\n#\n\n\n\n\n\nW", "#\n3\n\n\nF3\n\n\n\n\nW",
"F4\n4\n\n$\n\n\n\n\n\nE", "$\n4\n\n\nF4\n\n\n\n\nE",
"F5\n5\n\n%\n\n\n\n\n\nR", "%\n5\n\n\nF5\n\n\n\n\nR",
"F6\n6\n\n^\n\n\n\n\n\nT", "^\n6\n\n\nF6\n\n\n\n\nT",
"F7\n6\n\n&\n\n\n\n\n\nY", "&\n7\n\n\nF7\n\n\n\n\nY",
"F8\n8\n\n*\nMacro4\n\n\n\n\nU", "*\n8\n\n\nF8\n\n\n\n\nU",
"F9\n9\n\n(\n\n\n\n\n\nI", "(\n9\n\n\nF9\n\n\n\n\nI",
{ {
"fa": [ "fa": [
2,
0, 0,
0, 0,
0, 0
2
] ]
}, },
"F10\n0\n\n)\n\n\n\n\n\nO", ")\n0\n\n\nF10\n\n\n\n\nO",
{ {
"fa": [ "fa": [
2, 2,
2, 2,
0, 0,
2 0,
0,
0,
0,
0,
0
] ]
}, },
"F11\n-\n\n_\n\n\n\n\n\nP", "_\n-\n\n\nF11\n\n\n\n\nP",
"F12\n=\n\n+\n\n\n\n\n\n<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>" {
"a": 7,
"f": 3
},
"<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"
], ],
[ [
{ {
"a": 7,
"f": 3 "f": 3
}, },
"<i class='mss mss-Unicode-DeleteRight-Big-2'></i>", "<i class='mss mss-Unicode-DeleteRight-Big-2'></i>",
@ -66,12 +75,12 @@
}, },
"S", "S",
{ {
"a": 4,
"f": 3 "f": 3
}, },
"D", "=\n_\n\n\n\n\n\n\n\nD",
{ {
"t": "#ff0000", "t": "#ff0000",
"a": 4,
"f": 3 "f": 3
}, },
"\n(\n\n\n\n\n\n\n\nF", "\n(\n\n\n\n\n\n\n\nF",
@ -93,24 +102,21 @@
"t": "#000000", "t": "#000000",
"f": 3 "f": 3
}, },
"{\n\n\n\n\n\n\n\n\nK", "+\n-\n\n\nMacro4\n\n\n\n\nK",
{ {
"a": 7,
"f": 3 "f": 3
}, },
"{\n\n\n\n\n\n\n\n\nL", "L",
{ {
"a": 6,
"fa": [ "fa": [
2, 2,
2, 2,
2,
2,
0,
0,
0,
2 2
] ]
}, },
"\\\n\n|\n\n\n\n\n:\n\n;", "\n\n:\n\nF12\n\n\n\n;",
{ {
"a": 7, "a": 7,
"fa": [ "fa": [
@ -141,66 +147,79 @@
"fa": [ "fa": [
2, 2,
2, 2,
2, 0,
2 0
] ]
}, },
"\\\n[\n|\n{\nPaste\n\n\n\n\nV", "\\\n[\n\n\nPaste\n\n\n\n\nV",
"|\n]\n\n}\nMacro1\n\n\n\n\nB", "|\n]\n\n\nMacro1\n\n\n\n\nB",
"`\n'\n~\n\"\nMacro5\n\n\n\n\nN", "`\n'\n\n\nMacro5\n\n\n\n\nN",
"~\n\"\n\n\nMacro2\n\n\n\n\nM", "~\n\"\n\n\nMacro2\n\n\n\n\nM",
{ {
"fa": [ "fa": [
2,
2,
2, 2,
2, 2,
0, 0,
0, 0,
0, 0,
1 0,
0,
2
] ]
}, },
"[\n\n{\n\n\n\n\n<\n\n,", "<\n\n\n\n\n\n\n<\n\n,",
"[\n\n{\n\n\n\n\n\n\n.",
{ {
"a": 6
},
"\n\n?\n\n\n\n\n\n/",
{
"a": 4,
"fa": [ "fa": [
2, 2,
2, 2,
0
]
},
">\n\n\n\n\n\n\n>\n\n.",
{
"fa": [
0,
2, 2,
0, 0,
0, 0,
0, 0,
0, 0,
1, 0,
9, 2
0 ]
},
"\\\n\n\n\n\n\n\n?\n\n/",
{
"fa": [
0,
2,
0,
0,
0,
0,
0,
2,
9
] ]
}, },
"\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift" "\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift"
], ],
[ [
{ {
"a": 7, "a": 7
"f": 3
}, },
"Ctrl\n\n\n\nBLight", "Ctrl\n\n\n\nBLight",
{ {
"a": 4, "a": 4,
"fa": [ "fa": [
2,
1,
2,
0,
0,
0,
0, 0,
1, 1,
0,
0,
0,
0,
0,
2,
9, 9,
9 9
] ]
@ -208,29 +227,29 @@
"\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>", "\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>",
{ {
"fa": [ "fa": [
2,
1,
2,
0,
0,
0,
0, 0,
1, 1,
0,
0,
0,
0,
0,
2,
9, 9,
6 6
] ]
}, },
"\nZIn\n\n\n\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>", "\nZIn\n\n\nc.a.del\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>",
{ {
"fa": [ "fa": [
2,
1,
2,
0,
0,
0,
0, 0,
1, 1,
0,
0,
0,
0,
0,
2,
9, 9,
9 9
] ]

View file

@ -3,7 +3,7 @@ Created by James Folkert: https://twitter.com/trekloFsemaJ
Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c
![Layout](keyboard-layout.png "Practical Keymap") ![Layout](keyboard-layout.jpg "Practical Keymap")
* Online keyboard layout editor: http://www.keyboard-layout-editor.com/ * Online keyboard layout editor: http://www.keyboard-layout-editor.com/
@ -14,5 +14,11 @@ Added several custom functions to the keymap from the "ab" map. Special thanks t
* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4 * I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4
* add your mobile and email to the keymap before make * add your mobile and email to the keymap before make
* RAISE and LOWER also acts as PgUp and PgDn when tapped. * RAISE and LOWER also acts as PgUp and PgDn when tapped.
* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works) * Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.
* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.
## changes
* Removed some unneeded keys from raise and lower layers
* moved the + and = signs, backspace is now more intuitive
* moved all the Function keys to CUSTOM layer
* added ctrl alt del to CUSTOM layer
* simplified the layout picture greatly

View file

@ -10,12 +10,13 @@ COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
UNICODEMAP_ENABLE = yes # Unicode map UNICODEMAP_ENABLE = yes # Unicode map
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
API_SYSEX_ENABLE = no API_SYSEX_ENABLE = no
FAUXCLICKY_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -0,0 +1,39 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#define PRIYADI_PLANCK
/* bootmagic salt key */
#define BOOTMAGIC_KEY_SALT KC_ESC
/* skip bootmagic and eeconfig */
#define BOOTMAGIC_KEY_SKIP KC_SPACE
#define PREVENT_STUCK_MODIFIERS
#define UNICODE_TYPE_DELAY 0
#define LAYOUT_DVORAK
#define LAYOUT_COLEMAK
#define LAYOUT_NORMAN
#define LAYOUT_WORKMAN
#define DOUBLESPACE_LAYER_ENABLE
// #define TOLELOT_ENABLE
#define KEYMAP( \
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \
) \
{ \
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c}, \
{k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
{k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c}, \
{k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c} \
}
#endif

View file

@ -1,680 +1 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, #include "../../../handwired/promethium/keymaps/priyadi/keymap.c"
// this is the style you want to emulate.
#include "planck.h"
#include "action_layer.h"
#ifdef AUDIO_ENABLE
#include "audio.h"
#include "musical_notes.h"
#endif
#include "eeconfig.h"
#include "process_unicode.h"
#include "quantum.h"
// #define TOLELOT_ENABLE
extern keymap_config_t keymap_config;
enum layers {
_QWERTY,
_COLEMAK,
_WORKMAN,
_PUNC,
_NUM,
_FUNC,
_EMOJI,
_GREEKU,
_GREEKL,
_GUI,
};
enum planck_keycodes {
// layouts
QWERTY = SAFE_RANGE,
COLEMAK,
WORKMAN,
// layer switchers
PUNC,
NUM,
FUNC,
EMOJI,
GUI,
GREEK,
// os switchers
LINUX,
WIN,
OSX,
};
// Fillers to make layering clearer
#define _______ KC_TRNS
#define XXXXXXX KC_NO
// unicode map
enum unicode_name {
GRIN, // grinning face 😊
TJOY, // tears of joy 😂
SMILE, // grining face with smiling eyes 😁
HEART, // heart ❤
EYERT, // smiling face with heart shaped eyes 😍
CRY, // crying face 😭
SMEYE, // smiling face with smiling eyes 😊
UNAMU, // unamused 😒
KISS, // kiss 😘
HART2, // two hearts 💕
WEARY, // weary 😩
OKHND, // ok hand sign 👌
PENSV, // pensive 😔
SMIRK, // smirk 😏
RECYC, // recycle ♻
WINK, // wink 😉
THMUP, // thumb up 👍
THMDN, // thumb down 👎
PRAY, // pray 🙏
PHEW, // relieved 😌
MUSIC, // musical notes
FLUSH, // flushed 😳
CELEB, // celebration 🙌
CRY2, // crying face 😢
COOL, // smile with sunglasses 😎
NOEVS, // see no evil
NOEVH, // hear no evil
NOEVK, // speak no evil
POO, // pile of poo
EYES, // eyes
VIC, // victory hand
BHART, // broken heart
SLEEP, // sleeping face
SMIL2, // smiling face with open mouth & sweat
HUNRD, // 100
CONFU, // confused
TONGU, // face with tongue & winking eye
DISAP, // disappointed
YUMMY, // face savoring delicious food
CLAP, // hand clapping
FEAR, // face screaming in fear
HORNS, // smiling face with horns
HALO, // smiling face with halo
BYE, // waving hand
SUN, // sun
MOON, // moon
SKULL, // skull
// greek letters
UALPH,
UBETA,
UGAMM,
UDELT,
UEPSI,
UZETA,
UETA,
UTHET,
UIOTA,
UKAPP,
ULAMB,
UMU,
UNU,
UXI,
UOMIC,
UPI,
URHO,
USIGM,
UTAU,
UUPSI,
UPHI,
UCHI,
UPSI,
UOMEG,
LALPH,
LBETA,
LGAMM,
LDELT,
LEPSI,
LZETA,
LETA,
LTHET,
LIOTA,
LKAPP,
LLAMB,
LMU,
LNU,
LXI,
LOMIC,
LPI,
LRHO,
LSIGM,
LTAU,
LUPSI,
LPHI,
LCHI,
LPSI,
LOMEG,
FSIGM,
};
const uint32_t PROGMEM unicode_map[] = {
[GRIN] = 0x1F600,
[TJOY] = 0x1F602,
[SMILE] = 0x1F601,
[HEART] = 0x2764,
[EYERT] = 0x1f60d,
[CRY] = 0x1f62d,
[SMEYE] = 0x1F60A,
[UNAMU] = 0x1F612,
[KISS] = 0x1F618,
[HART2] = 0x1F495,
[WEARY] = 0x1F629,
[OKHND] = 0x1F44C,
[PENSV] = 0x1F614,
[SMIRK] = 0x1F60F,
[RECYC] = 0x267B,
[WINK] = 0x1F609,
[THMUP] = 0x1F44D,
[THMDN] = 0x1F44E,
[PRAY] = 0x1F64F,
[PHEW] = 0x1F60C,
[MUSIC] = 0x1F3B6,
[FLUSH] = 0x1F633,
[CELEB] = 0x1F64C,
[CRY2] = 0x1F622,
[COOL] = 0x1F60E,
[NOEVS] = 0x1F648,
[NOEVH] = 0x1F649,
[NOEVK] = 0x1F64A,
[POO] = 0x1F4A9,
[EYES] = 0x1F440,
[VIC] = 0x270C,
[BHART] = 0x1F494,
[SLEEP] = 0x1F634,
[SMIL2] = 0x1F605,
[HUNRD] = 0x1F4AF,
[CONFU] = 0x1F615,
[TONGU] = 0x1F61C,
[DISAP] = 0x1F61E,
[YUMMY] = 0x1F60B,
[CLAP] = 0x1F44F,
[FEAR] = 0x1F631,
[HORNS] = 0x1F608,
[HALO] = 0x1F607,
[BYE] = 0x1F44B,
[SUN] = 0x2600,
[MOON] = 0x1F314,
[SKULL] = 0x1F480,
// greek letters
[UALPH] = 0x0391,
[UBETA] = 0x0392,
[UGAMM] = 0x0393,
[UDELT] = 0x0394,
[UEPSI] = 0x0395,
[UZETA] = 0x0396,
[UETA] = 0x0397,
[UTHET] = 0x0398,
[UIOTA] = 0x0399,
[UKAPP] = 0x039A,
[ULAMB] = 0x039B,
[UMU] = 0x039C,
[UNU] = 0x039D,
[UXI] = 0x039E,
[UOMIC] = 0x039F,
[UPI] = 0x03A0,
[URHO] = 0x03A1,
[USIGM] = 0x03A3,
[UTAU] = 0x03A4,
[UUPSI] = 0x03A5,
[UPHI] = 0x03A6,
[UCHI] = 0x03A7,
[UPSI] = 0x03A8,
[UOMEG] = 0x03A9,
[LALPH] = 0x03B1,
[LBETA] = 0x03B2,
[LGAMM] = 0x03B3,
[LDELT] = 0x03B4,
[LEPSI] = 0x03B5,
[LZETA] = 0x03B6,
[LETA] = 0x03B7,
[LTHET] = 0x03B8,
[LIOTA] = 0x03B9,
[LKAPP] = 0x03BA,
[LLAMB] = 0x03BB,
[LMU] = 0x03BC,
[LNU] = 0x03BD,
[LXI] = 0x03BE,
[LOMIC] = 0x03BF,
[LPI] = 0x03C0,
[LRHO] = 0x03C1,
[LSIGM] = 0x03C3,
[LTAU] = 0x03C4,
[LUPSI] = 0x03C5,
[LPHI] = 0x03C6,
[LCHI] = 0x03C7,
[LPSI] = 0x03C8,
[LOMEG] = 0x03C9,
[FSIGM] = 0x03C2,
};
// hybrid shift - =
// #undef KC_LSFT
// #define KC_LSFT MT(MOD_LSFT, KC_MINS)
// #undef KC_RSFT
// #define KC_RSFT MT(MOD_LSFT, KC_EQL)
// hybrid right-gui & scroll lock (mapped to Compose in OS)
#undef KC_RCTL
#define KC_RCTL MT(MOD_LCTL, KC_SLCK)
// keymaps
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Shift |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | GUI | Alt | Punc | Num | Space | Func |Emoji |Greek |AltGr | Ctrl |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = {
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT },
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT},
{KC_LCTL, KC_LALT, KC_LGUI, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, GREEK, KC_RALT, KC_RCTL}
},
/* Colemak
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | R | S | T | D | H | N | E | I | O |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | K | M | , | . | / |Shift |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | GUI | Alt | Punc | Num | Space | Func |Emoji |AltGr | GUI | Ctrl |
* `-----------------------------------------------------------------------------------'
*/
[_COLEMAK] = {
{_______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______},
{_______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______},
{_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Workman
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | D | R | W | B | J | F | U | P | ; | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | H | T | G | Y | N | E | O | I |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | M | C | V | K | K | , | . | / |Shift |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | GUI | Alt | Punc | Num | Space | Func |Emoji |AltGr | GUI | Ctrl |
* `-----------------------------------------------------------------------------------'
*/
[_WORKMAN] = {
{_______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______},
{_______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______},
{_______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Uppercase Greek
* ,-----------------------------------------------------------------------------------.
* | | | | | | | | | | | | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_GREEKU] = {
{_______, _______, _______,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______},
{_______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), _______, _______},
{_______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Lowercase Greek
* ,-----------------------------------------------------------------------------------.
* | | | | | | | | | | | | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_GREEKL] = {
{_______, _______,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______},
{_______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), _______, _______},
{_______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), _______, _______, _______, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Punc
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | ` |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | \ | - | = | < | > | ( | ) | ' | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | _ | + | { | } | [ | ] | " | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_PUNC] = {
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_GRV },
{XXXXXXX, XXXXXXX, KC_BSLS, KC_MINS, KC_EQL, KC_LABK, KC_RABK, KC_LPRN, KC_RPRN, KC_QUOT, XXXXXXX, XXXXXXX},
{XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_DQUO, XXXXXXX, XXXXXXX},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Num
* ,-----------------------------------------------------------------------------------.
* | ^ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | @ | A | B | C | ( | ) | 4 | 5 | 6 | : |Enter |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | & | # | D | E | F | [ | ] | 1 | 2 | 3 | / | * |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | x | | | 0 | , | . | + | - |
* `-----------------------------------------------------------------------------------'
*/
[_NUM] = {
{KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
{ KC_ESC, KC_AT, S(KC_A), S(KC_B), S(KC_C), KC_LPRN, KC_RPRN, KC_4, KC_5, KC_6, KC_COLN, KC_ENT},
{KC_AMPR, KC_HASH, S(KC_D), S(KC_E), S(KC_F), KC_LBRC, KC_RBRC, KC_1, KC_2, KC_3, KC_SLSH, KC_ASTR},
{_______, _______, _______, KC_X, _______, KC_SPC, KC_SPC, KC_0, KC_COMM, KC_DOT, KC_PLUS, KC_MINS}
},
/* Func
* ,-----------------------------------------------------------------------------------.
* | | F1 | F2 | F3 | F4 | | | PgUp | Up | PgDn | PgUp | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | Ins |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F9 | F10 | F11 | F12 | | | | Home | End | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_FUNC] = {
{XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL},
{XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8,KC_PSCREEN,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_INS},
{_______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Emoji
* ,-----------------------------------------------------------------------------------.
* | | | | | | | | | | | | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_EMOJI] = {
{X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW)},
{X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS)},
{X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH)},
{ X(POO), X(EYES),X(HUNRD), _______,X(SKULL),X(HORNS), X(HALO), X(FEAR), _______,X(YUMMY),X(DISAP),X(NOEVK)}
},
/* GUI
* ,-----------------------------------------------------------------------------------.
* | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* |Linux | | Vol- | Mute | Vol+ | | | D- | | D+ | |Qwerty|
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Win | | Prev | Play | Next | | | | | | |Colmak|
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | OSX | | | | | BL- | BL+ | | | | |Workmn|
* `-----------------------------------------------------------------------------------'
*/
[_GUI] = {
{_______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______},
{ LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY},
{ WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, COLEMAK},
{ OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, _______, _______, WORKMAN}
},
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
float tone_workman[][2] = SONG(DVORAK_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
float tone_linux[][2] = SONG(CAPS_LOCK_ON_SOUND);
float tone_windows[][2] = SONG(SCROLL_LOCK_ON_SOUND);
float tone_osx[][2] = SONG(NUM_LOCK_ON_SOUND);
float tone_click[][2] = SONG(MUSICAL_NOTE(_F3, 2));
float tone_release[][2] = SONG(MUSICAL_NOTE(_A3, 2));
float tone_tolelot[][2] = SONG(Q__NOTE(_E5), Q__NOTE(_C5), Q__NOTE(_D5));
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
// faux clicky
// if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0);
#ifdef AUDIO_ENABLE
#ifdef TOLELOT_ENABLE
if (record->event.pressed) {
PLAY_NOTE_ARRAY(tone_tolelot, false, 0);
}
#else
if (record->event.pressed) {
PLAY_NOTE_ARRAY(tone_click, false, 0);
} else {
PLAY_NOTE_ARRAY(tone_release, false, 0);
}
#endif
#endif
bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT);
bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT);
switch (keycode) {
// Greek layer handling
case GREEK:
if (record->event.pressed) {
if (lshifted || rshifted) {
layer_on(_GREEKU);
layer_off(_GREEKL);
} else {
layer_on(_GREEKL);
layer_off(_GREEKU);
}
} else {
layer_off(_GREEKU);
layer_off(_GREEKL);
}
return false;
break;
case KC_LSFT:
case KC_RSFT:
;
uint8_t layer = biton32(layer_state);
if (layer == _GREEKU || layer == _GREEKL) {
if (record->event.pressed) {
layer_on(_GREEKU);
layer_off(_GREEKL);
} else {
if (lshifted ^ rshifted) { // if only one shift is pressed
layer_on(_GREEKL);
layer_off(_GREEKU);
}
}
}
return true;
break;
// QWERTZ style comma and dot: semicolon and colon when shifted
case KC_COMM:
if (record->event.pressed) {
if (lshifted || rshifted) {
if (lshifted) unregister_code(KC_LSFT);
if (rshifted) unregister_code(KC_RSFT);
register_code(KC_SCLN);
unregister_code(KC_SCLN);
if (lshifted) register_code(KC_LSFT);
if (rshifted) register_code(KC_RSFT);
} else {
register_code(KC_COMM);
unregister_code(KC_COMM);
}
}
return false;
break;
case KC_DOT:
if (record->event.pressed) {
if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) {
register_code(KC_SCLN);
unregister_code(KC_SCLN);
} else {
register_code(KC_DOT);
unregister_code(KC_DOT);
}
}
return false;
break;
// layout switcher
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
#endif
persistant_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_colemak, false, 0);
#endif
persistant_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case WORKMAN:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_workman, false, 0);
#endif
persistant_default_layer_set(1UL<<_WORKMAN);
}
return false;
break;
// layer switchers
case PUNC:
if (record->event.pressed) {
layer_on(_PUNC);
update_tri_layer(_PUNC, _EMOJI, _GUI);
} else {
layer_off(_PUNC);
update_tri_layer(_PUNC, _EMOJI, _GUI);
}
return false;
break;
case EMOJI:
if (record->event.pressed) {
layer_on(_EMOJI);
update_tri_layer(_PUNC, _EMOJI, _GUI);
} else {
layer_off(_EMOJI);
update_tri_layer(_PUNC, _EMOJI, _GUI);
}
return false;
break;
case NUM:
if (record->event.pressed) {
layer_on(_NUM);
} else {
layer_off(_NUM);
}
return false;
break;
case FUNC:
if (record->event.pressed) {
layer_on(_FUNC);
} else {
layer_off(_FUNC);
}
return false;
break;
// OS switchers
case LINUX:
set_unicode_input_mode(UC_LNX);
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_linux, false, 0);
#endif
return false;
break;
case WIN:
set_unicode_input_mode(UC_WINC);
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_windows, false, 0);
#endif
return false;
break;
case OSX:
set_unicode_input_mode(UC_OSX);
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_osx, false, 0);
#endif
return false;
break;
}
return true;
}
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
set_unicode_input_mode(UC_LNX);
}
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_NOTE_ARRAY(tone_startup, false, 0);
}
void shutdown_user()
{
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
}
#endif

View file

@ -195,24 +195,20 @@ const uint16_t PROGMEM fn_actions[] = {
}; };
#ifdef AUDIO_ENABLE #ifdef AUDIO_ENABLE
float tone_startup[][2] = {
{440.0*pow(2.0,(31)/12.0), 12},
{440.0*pow(2.0,(28)/12.0), 8},
{440.0*pow(2.0,(19)/12.0), 8},
{440.0*pow(2.0,(24)/12.0), 8},
{440.0*pow(2.0,(28)/12.0), 20}
};
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND); float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND); float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND); float tone_colemak[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND); float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float goodbye[][2] = SONG(GOODBYE_SOUND); float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif #endif
void persistant_default_layer_set(uint16_t default_layer) { void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer); eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer); default_layer_set(default_layer);
@ -309,18 +305,35 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
}; };
void matrix_init_user(void) { void matrix_init_user(void) {
#ifdef AUDIO_ENABLE #ifdef AUDIO_ENABLE
_delay_ms(20); // stops the tick startup_user();
PLAY_NOTE_ARRAY(tone_startup, false, 0); #endif
#endif
} }
#ifdef AUDIO_ENABLE #ifdef AUDIO_ENABLE
void play_goodbye_tone()
void startup_user()
{ {
PLAY_NOTE_ARRAY(goodbye, false, 0); _delay_ms(20); // gets rid of tick
_delay_ms(150); PLAY_NOTE_ARRAY(tone_startup, false, 0);
} }
void shutdown_user()
{
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_NOTE_ARRAY(music_scale, false, 0);
}
#endif #endif

View file

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif

162
keyboards/roadkit/config.h Normal file
View file

@ -0,0 +1,162 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEAE
#define PRODUCT_ID 0x8846
#define DEVICE_VER 0x0001
#define MANUFACTURER TheVan Keyboards
#define PRODUCT Roadkit Micro
#define DESCRIPTION keyboard firmware for Roadkit Micro
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F0, F5, D7, B4 }
#define MATRIX_COL_PINS { F1, F4, D6, D4 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View file

@ -0,0 +1,49 @@
#include "roadkit.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _NP 0
// Macro name shortcuts
#define NUMPAD M(_NP)
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NP] = /* Numpad */
KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
KC_KP_4, KC_KP_5, KC_KP_6, \
KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \
KC_KP_0, KC_KP_DOT),
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _NP:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_NP);
}
break;
}
return MACRO_NONE;
};

View file

@ -0,0 +1 @@
# The default keymap for roadkit

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,8 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
// place overrides here
#endif

View file

@ -0,0 +1,61 @@
#include "roadkit.h"
#include "action_layer.h"
#include "eeconfig.h"
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _NP 0
#define _L1 1
// Macro name shortcuts
#define NUMPAD M(_NP)
#define LAYER1 M(_L1)
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NP] = /* Numpad */
SINGLES_KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, \
KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \
KC_KP_0, KC_KP_DOT, TG(_L1), KC_BSPC),
[_L1] = /* LAYER 1 */
SINGLES_KEYMAP(KC_NUMLOCK, KC_TRNS, KC_TRNS, KC_VOLU, \
KC_TRNS, KC_UP, KC_TRNS, KC_VOLD, \
KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
const uint16_t PROGMEM fn_actions[] = {
};
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
case _L1:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_L1);
}
break;
case _NP:
if (record->event.pressed) {
persistant_default_layer_set(1UL<<_NP);
}
break;
}
return MACRO_NONE;
};

View file

@ -0,0 +1,3 @@
# The singles keymap for roadkit
This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point.

Some files were not shown because too many files have changed in this diff Show more