[QP] Add ILI9488 support. (#17438)
This commit is contained in:
Nick Brassel
GitHub
parent
d6c39490df
commit
b67ae67687
13 changed files with 252 additions and 64 deletions
|
|
@ -24,6 +24,7 @@ Hardware supported:
|
|||
| GC9A01 | RGB LCD (circular) | 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = gc9a01_spi` |
|
||||
| ILI9163 | RGB LCD | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9163_spi` |
|
||||
| ILI9341 | RGB LCD | 240x320 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9341_spi` |
|
||||
| ILI9488 | RGB LCD | 320x480 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9488_spi` |
|
||||
| SSD1351 | RGB OLED | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ssd1351_spi` |
|
||||
| ST7789 | RGB LCD | 240x320, 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = st7789_spi` |
|
||||
|
||||
|
|
@ -654,6 +655,30 @@ The maximum number of displays can be configured by changing the following in yo
|
|||
#define ILI9341_NUM_DEVICES 3
|
||||
```
|
||||
|
||||
### ILI9488 :id=qp-driver-ili9488
|
||||
|
||||
Enabling support for the ILI9488 in Quantum Painter is done by adding the following to `rules.mk`:
|
||||
|
||||
```make
|
||||
QUANTUM_PAINTER_ENABLE = yes
|
||||
QUANTUM_PAINTER_DRIVERS = ili9488_spi
|
||||
```
|
||||
|
||||
Creating a ILI9488 device in firmware can then be done with the following API:
|
||||
|
||||
```c
|
||||
painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
|
||||
```
|
||||
|
||||
The device handle returned from the `qp_ili9488_make_spi_device` function can be used to perform all other drawing operations.
|
||||
|
||||
The maximum number of displays can be configured by changing the following in your `config.h` (default is 1):
|
||||
|
||||
```c
|
||||
// 3 displays:
|
||||
#define ILI9488_NUM_DEVICES 3
|
||||
```
|
||||
|
||||
### SSD1351 :id=qp-driver-ssd1351
|
||||
|
||||
Enabling support for the SSD1351 in Quantum Painter is done by adding the following to `rules.mk`:
|
||||
|
|
|
|||
|
|
@ -102,12 +102,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t gc9a01_driver_vtable = {
|
|||
.flush = qp_tft_panel_flush,
|
||||
.pixdata = qp_tft_panel_pixdata,
|
||||
.viewport = qp_tft_panel_viewport,
|
||||
.palette_convert = qp_tft_panel_palette_convert,
|
||||
.append_pixels = qp_tft_panel_append_pixels,
|
||||
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
||||
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
||||
},
|
||||
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.opcodes =
|
||||
{
|
||||
.display_on = GC9A01_CMD_DISPLAY_ON,
|
||||
|
|
|
|||
|
|
@ -67,12 +67,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ili9163_driver_vtable =
|
|||
.flush = qp_tft_panel_flush,
|
||||
.pixdata = qp_tft_panel_pixdata,
|
||||
.viewport = qp_tft_panel_viewport,
|
||||
.palette_convert = qp_tft_panel_palette_convert,
|
||||
.append_pixels = qp_tft_panel_append_pixels,
|
||||
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
||||
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
||||
},
|
||||
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.opcodes =
|
||||
{
|
||||
.display_on = ILI9XXX_CMD_DISPLAY_ON,
|
||||
|
|
|
|||
|
|
@ -74,12 +74,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable =
|
|||
.flush = qp_tft_panel_flush,
|
||||
.pixdata = qp_tft_panel_pixdata,
|
||||
.viewport = qp_tft_panel_viewport,
|
||||
.palette_convert = qp_tft_panel_palette_convert,
|
||||
.append_pixels = qp_tft_panel_append_pixels,
|
||||
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
||||
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
||||
},
|
||||
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.opcodes =
|
||||
{
|
||||
.display_on = ILI9XXX_CMD_DISPLAY_ON,
|
||||
|
|
|
|||
120
drivers/painter/ili9xxx/qp_ili9488.c
Normal file
120
drivers/painter/ili9xxx/qp_ili9488.c
Normal file
|
|
@ -0,0 +1,120 @@
|
|||
// Copyright 2021 Nick Brassel (@tzarc)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "qp_internal.h"
|
||||
#include "qp_comms.h"
|
||||
#include "qp_ili9488.h"
|
||||
#include "qp_ili9xxx_opcodes.h"
|
||||
#include "qp_tft_panel.h"
|
||||
|
||||
#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE
|
||||
# include <qp_comms_spi.h>
|
||||
#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Common
|
||||
|
||||
// Driver storage
|
||||
tft_panel_dc_reset_painter_device_t ili9488_drivers[ILI9488_NUM_DEVICES] = {0};
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Initialization
|
||||
|
||||
bool qp_ili9488_init(painter_device_t device, painter_rotation_t rotation) {
|
||||
// clang-format off
|
||||
const uint8_t ili9488_init_sequence[] = {
|
||||
// Command, Delay, N, Data[N]
|
||||
ILI9XXX_CMD_RESET, 120, 0,
|
||||
ILI9XXX_SET_PGAMMA, 0, 15, 0x00, 0x03, 0x09, 0x08, 0x16, 0x0A, 0x3F, 0x78, 0x4C, 0x09, 0x0A, 0x08, 0x16, 0x1A, 0x0F,
|
||||
ILI9XXX_SET_NGAMMA, 0, 15, 0x00, 0x16, 0x19, 0x03, 0x0F, 0x05, 0x32, 0x45, 0x46, 0x04, 0x0E, 0x0D, 0x35, 0x37, 0x0F,
|
||||
ILI9XXX_SET_POWER_CTL_1, 0, 2, 0x17, 0x15,
|
||||
ILI9XXX_SET_POWER_CTL_2, 0, 1, 0x41,
|
||||
ILI9XXX_SET_VCOM_CTL_1, 0, 3, 0x00, 0x12, 0x80,
|
||||
ILI9XXX_SET_PIX_FMT, 0, 1, 0x66,
|
||||
ILI9XXX_SET_RGB_IF_SIG_CTL, 0, 1, 0x80,
|
||||
ILI9XXX_SET_FRAME_CTL_NORMAL, 0, 1, 0xA0,
|
||||
ILI9XXX_SET_INVERSION_CTL, 0, 1, 0x02,
|
||||
ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x02, 0x02,
|
||||
ILI9XXX_SET_IMAGE_FUNCTION, 0, 1, 0x00,
|
||||
ILI9XXX_SET_PUMP_RATIO_CTL, 0, 4, 0xA9, 0x51, 0x2C, 0x82,
|
||||
ILI9XXX_CMD_SLEEP_OFF, 5, 0,
|
||||
ILI9XXX_CMD_DISPLAY_ON, 20, 0
|
||||
};
|
||||
// clang-format on
|
||||
qp_comms_bulk_command_sequence(device, ili9488_init_sequence, sizeof(ili9488_init_sequence));
|
||||
|
||||
// Configure the rotation (i.e. the ordering and direction of memory writes in GRAM)
|
||||
const uint8_t madctl[] = {
|
||||
[QP_ROTATION_0] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MY,
|
||||
[QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MV | ILI9XXX_MADCTL_MY,
|
||||
[QP_ROTATION_180] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX,
|
||||
[QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV,
|
||||
};
|
||||
qp_comms_command_databyte(device, ILI9XXX_SET_MEM_ACS_CTL, madctl[rotation]);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Driver vtable
|
||||
|
||||
const struct tft_panel_dc_reset_painter_driver_vtable_t ili9488_driver_vtable = {
|
||||
.base =
|
||||
{
|
||||
.init = qp_ili9488_init,
|
||||
.power = qp_tft_panel_power,
|
||||
.clear = qp_tft_panel_clear,
|
||||
.flush = qp_tft_panel_flush,
|
||||
.pixdata = qp_tft_panel_pixdata,
|
||||
.viewport = qp_tft_panel_viewport,
|
||||
.palette_convert = qp_tft_panel_palette_convert_rgb888,
|
||||
.append_pixels = qp_tft_panel_append_pixels_rgb888,
|
||||
},
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.opcodes =
|
||||
{
|
||||
.display_on = ILI9XXX_CMD_DISPLAY_ON,
|
||||
.display_off = ILI9XXX_CMD_DISPLAY_OFF,
|
||||
.set_column_address = ILI9XXX_SET_COL_ADDR,
|
||||
.set_row_address = ILI9XXX_SET_PAGE_ADDR,
|
||||
.enable_writes = ILI9XXX_SET_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// SPI
|
||||
|
||||
#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE
|
||||
|
||||
// Factory function for creating a handle to the ILI9488 device
|
||||
painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
|
||||
for (uint32_t i = 0; i < ILI9488_NUM_DEVICES; ++i) {
|
||||
tft_panel_dc_reset_painter_device_t *driver = &ili9488_drivers[i];
|
||||
if (!driver->base.driver_vtable) {
|
||||
driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&ili9488_driver_vtable;
|
||||
driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
|
||||
driver->base.native_bits_per_pixel = 24; // RGB888
|
||||
driver->base.panel_width = panel_width;
|
||||
driver->base.panel_height = panel_height;
|
||||
driver->base.rotation = QP_ROTATION_0;
|
||||
driver->base.offset_x = 0;
|
||||
driver->base.offset_y = 0;
|
||||
|
||||
// SPI and other pin configuration
|
||||
driver->base.comms_config = &driver->spi_dc_reset_config;
|
||||
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
|
||||
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
|
||||
driver->spi_dc_reset_config.spi_config.lsb_first = false;
|
||||
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
|
||||
driver->spi_dc_reset_config.dc_pin = dc_pin;
|
||||
driver->spi_dc_reset_config.reset_pin = reset_pin;
|
||||
return (painter_device_t)driver;
|
||||
}
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
37
drivers/painter/ili9xxx/qp_ili9488.h
Normal file
37
drivers/painter/ili9xxx/qp_ili9488.h
Normal file
|
|
@ -0,0 +1,37 @@
|
|||
// Copyright 2021 Nick Brassel (@tzarc)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "gpio.h"
|
||||
#include "qp_internal.h"
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Quantum Painter ILI9488 configurables (add to your keyboard's config.h)
|
||||
|
||||
#ifndef ILI9488_NUM_DEVICES
|
||||
/**
|
||||
* @def This controls the maximum number of ILI9488 devices that Quantum Painter can communicate with at any one time.
|
||||
* Increasing this number allows for multiple displays to be used.
|
||||
*/
|
||||
# define ILI9488_NUM_DEVICES 1
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Quantum Painter ILI9488 device factories
|
||||
|
||||
#ifdef QUANTUM_PAINTER_ILI9488_SPI_ENABLE
|
||||
/**
|
||||
* Factory method for an ILI9488 SPI LCD device.
|
||||
*
|
||||
* @param panel_width[in] the width of the display panel
|
||||
* @param panel_height[in] the height of the display panel
|
||||
* @param chip_select_pin[in] the GPIO pin used for SPI chip select
|
||||
* @param dc_pin[in] the GPIO pin used for D/C control
|
||||
* @param reset_pin[in] the GPIO pin used for RST
|
||||
* @param spi_divisor[in] the SPI divisor to use when communicating with the display
|
||||
* @param spi_mode[in] the SPI mode to use when communicating with the display
|
||||
* @return the device handle used with all drawing routines in Quantum Painter
|
||||
*/
|
||||
painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
|
||||
#endif // QUANTUM_PAINTER_ILI9488_SPI_ENABLE
|
||||
|
|
@ -85,6 +85,7 @@
|
|||
#define ILI9XXX_SET_NGAMMA 0xE1 // Set negative gamma
|
||||
#define ILI9XXX_SET_DGAMMA_CTL_1 0xE2 // Set digital gamma ctl 1
|
||||
#define ILI9XXX_SET_DGAMMA_CTL_2 0xE3 // Set digital gamma ctl 2
|
||||
#define ILI9XXX_SET_IMAGE_FUNCTION 0xE9 // Set image function
|
||||
#define ILI9XXX_ENABLE_3_GAMMA 0xF2 // Enable 3 gamma
|
||||
#define ILI9XXX_SET_IF_CTL 0xF6 // Set interface control
|
||||
#define ILI9XXX_SET_PUMP_RATIO_CTL 0xF7 // Set pump ratio control
|
||||
|
|
|
|||
|
|
@ -71,8 +71,8 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t ssd1351_driver_vtable =
|
|||
.flush = qp_tft_panel_flush,
|
||||
.pixdata = qp_tft_panel_pixdata,
|
||||
.viewport = qp_tft_panel_viewport,
|
||||
.palette_convert = qp_tft_panel_palette_convert,
|
||||
.append_pixels = qp_tft_panel_append_pixels,
|
||||
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
||||
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
||||
},
|
||||
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
|
||||
.num_window_bytes = 1,
|
||||
|
|
|
|||
|
|
@ -90,12 +90,11 @@ const struct tft_panel_dc_reset_painter_driver_vtable_t st7789_driver_vtable = {
|
|||
.flush = qp_tft_panel_flush,
|
||||
.pixdata = qp_tft_panel_pixdata,
|
||||
.viewport = qp_tft_panel_viewport,
|
||||
.palette_convert = qp_tft_panel_palette_convert,
|
||||
.append_pixels = qp_tft_panel_append_pixels,
|
||||
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
||||
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
||||
},
|
||||
.rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.num_window_bytes = 2,
|
||||
.swap_window_coords = false,
|
||||
.opcodes =
|
||||
{
|
||||
.display_on = ST77XX_CMD_DISPLAY_ON,
|
||||
|
|
|
|||
|
|
@ -9,29 +9,6 @@
|
|||
|
||||
#define BYTE_SWAP(x) (((((uint16_t)(x)) >> 8) & 0x00FF) | ((((uint16_t)(x)) << 8) & 0xFF00))
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Native pixel format conversion
|
||||
|
||||
uint16_t qp_rgb888_to_rgb565(uint8_t r, uint8_t g, uint8_t b) {
|
||||
uint16_t rgb565 = (((uint16_t)r) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)b) >> 3);
|
||||
return rgb565;
|
||||
}
|
||||
|
||||
uint16_t qp_rgb888_to_rgb565_swapped(uint8_t r, uint8_t g, uint8_t b) {
|
||||
uint16_t rgb565 = (((uint16_t)r) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)b) >> 3);
|
||||
return BYTE_SWAP(rgb565);
|
||||
}
|
||||
|
||||
uint16_t qp_rgb888_to_bgr565(uint8_t r, uint8_t g, uint8_t b) {
|
||||
uint16_t bgr565 = (((uint16_t)b) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)r) >> 3);
|
||||
return bgr565;
|
||||
}
|
||||
|
||||
uint16_t qp_rgb888_to_bgr565_swapped(uint8_t r, uint8_t g, uint8_t b) {
|
||||
uint16_t bgr565 = (((uint16_t)b) >> 3) << 11 | (((uint16_t)g) >> 2) << 5 | (((uint16_t)r) >> 3);
|
||||
return BYTE_SWAP(bgr565);
|
||||
}
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Quantum Painter API implementations
|
||||
|
||||
|
|
@ -105,26 +82,49 @@ bool qp_tft_panel_viewport(painter_device_t device, uint16_t left, uint16_t top,
|
|||
|
||||
// Stream pixel data to the current write position in GRAM
|
||||
bool qp_tft_panel_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count) {
|
||||
qp_comms_send(device, pixel_data, native_pixel_count * sizeof(uint16_t));
|
||||
struct painter_driver_t *driver = (struct painter_driver_t *)device;
|
||||
qp_comms_send(device, pixel_data, native_pixel_count * driver->native_bits_per_pixel / 8);
|
||||
return true;
|
||||
}
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Convert supplied palette entries into their native equivalents
|
||||
bool qp_tft_panel_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
|
||||
struct painter_driver_t * driver = (struct painter_driver_t *)device;
|
||||
struct tft_panel_dc_reset_painter_driver_vtable_t *vtable = (struct tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable;
|
||||
|
||||
bool qp_tft_panel_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
|
||||
for (int16_t i = 0; i < palette_size; ++i) {
|
||||
RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
|
||||
palette[i].rgb565 = vtable->rgb888_to_native16bit(rgb.r, rgb.g, rgb.b);
|
||||
RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
|
||||
uint16_t rgb565 = (((uint16_t)rgb.r) >> 3) << 11 | (((uint16_t)rgb.g) >> 2) << 5 | (((uint16_t)rgb.b) >> 3);
|
||||
palette[i].rgb565 = BYTE_SWAP(rgb565);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
bool qp_tft_panel_palette_convert_rgb888(painter_device_t device, int16_t palette_size, qp_pixel_t *palette) {
|
||||
for (int16_t i = 0; i < palette_size; ++i) {
|
||||
RGB rgb = hsv_to_rgb_nocie((HSV){palette[i].hsv888.h, palette[i].hsv888.s, palette[i].hsv888.v});
|
||||
palette[i].rgb888.r = rgb.r;
|
||||
palette[i].rgb888.g = rgb.g;
|
||||
palette[i].rgb888.b = rgb.b;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Append pixels to the target location, keyed by the pixel index
|
||||
bool qp_tft_panel_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
|
||||
|
||||
bool qp_tft_panel_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
|
||||
uint16_t *buf = (uint16_t *)target_buffer;
|
||||
for (uint32_t i = 0; i < pixel_count; ++i) {
|
||||
buf[pixel_offset + i] = palette[palette_indices[i]].rgb565;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
bool qp_tft_panel_append_pixels_rgb888(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices) {
|
||||
for (uint32_t i = 0; i < pixel_count; ++i) {
|
||||
target_buffer[(pixel_offset + i) * 3 + 0] = palette[palette_indices[i]].rgb888.r;
|
||||
target_buffer[(pixel_offset + i) * 3 + 1] = palette[palette_indices[i]].rgb888.g;
|
||||
target_buffer[(pixel_offset + i) * 3 + 2] = palette[palette_indices[i]].rgb888.b;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -11,15 +11,10 @@
|
|||
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// Common TFT panel implementation using D/C, and RST pins.
|
||||
|
||||
typedef uint16_t (*rgb888_to_native_uint16_t)(uint8_t r, uint8_t g, uint8_t b);
|
||||
|
||||
// Driver vtable with extras
|
||||
struct tft_panel_dc_reset_painter_driver_vtable_t {
|
||||
struct painter_driver_vtable_t base; // must be first, so it can be cast to/from the painter_driver_vtable_t* type
|
||||
|
||||
// Conversion function for palette entries
|
||||
rgb888_to_native_uint16_t rgb888_to_native16bit;
|
||||
|
||||
// Number of bytes for transmitting x/y coordinates
|
||||
uint8_t num_window_bytes;
|
||||
|
||||
|
|
@ -58,10 +53,9 @@ bool qp_tft_panel_clear(painter_device_t device);
|
|||
bool qp_tft_panel_flush(painter_device_t device);
|
||||
bool qp_tft_panel_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom);
|
||||
bool qp_tft_panel_pixdata(painter_device_t device, const void *pixel_data, uint32_t native_pixel_count);
|
||||
bool qp_tft_panel_palette_convert(painter_device_t device, int16_t palette_size, qp_pixel_t *palette);
|
||||
bool qp_tft_panel_append_pixels(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices);
|
||||
|
||||
uint16_t qp_rgb888_to_rgb565(uint8_t r, uint8_t g, uint8_t b);
|
||||
uint16_t qp_rgb888_to_rgb565_swapped(uint8_t r, uint8_t g, uint8_t b);
|
||||
uint16_t qp_rgb888_to_bgr565(uint8_t r, uint8_t g, uint8_t b);
|
||||
uint16_t qp_rgb888_to_bgr565_swapped(uint8_t r, uint8_t g, uint8_t b);
|
||||
bool qp_tft_panel_palette_convert_rgb565_swapped(painter_device_t device, int16_t palette_size, qp_pixel_t *palette);
|
||||
bool qp_tft_panel_palette_convert_rgb888(painter_device_t device, int16_t palette_size, qp_pixel_t *palette);
|
||||
|
||||
bool qp_tft_panel_append_pixels_rgb565(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices);
|
||||
bool qp_tft_panel_append_pixels_rgb888(painter_device_t device, uint8_t *target_buffer, qp_pixel_t *palette, uint32_t pixel_offset, uint32_t pixel_count, uint8_t *palette_indices);
|
||||
|
|
|
|||
|
|
@ -440,6 +440,10 @@ int16_t qp_drawtext_recolor(painter_device_t device, uint16_t x, uint16_t y, pai
|
|||
# include "qp_ili9341.h"
|
||||
#endif // QUANTUM_PAINTER_ILI9341_ENABLE
|
||||
|
||||
#ifdef QUANTUM_PAINTER_ILI9488_ENABLE
|
||||
# include "qp_ili9488.h"
|
||||
#endif // QUANTUM_PAINTER_ILI9488_ENABLE
|
||||
|
||||
#ifdef QUANTUM_PAINTER_ST7789_ENABLE
|
||||
# include "qp_st7789.h"
|
||||
#endif // QUANTUM_PAINTER_ST7789_ENABLE
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ QUANTUM_PAINTER_DRIVERS ?=
|
|||
QUANTUM_PAINTER_ANIMATIONS_ENABLE ?= yes
|
||||
|
||||
# The list of permissible drivers that can be listed in QUANTUM_PAINTER_DRIVERS
|
||||
VALID_QUANTUM_PAINTER_DRIVERS := ili9163_spi ili9341_spi st7789_spi gc9a01_spi ssd1351_spi
|
||||
VALID_QUANTUM_PAINTER_DRIVERS := ili9163_spi ili9341_spi ili9488_spi st7789_spi gc9a01_spi ssd1351_spi
|
||||
|
||||
#-------------------------------------------------------------------------------
|
||||
|
||||
|
|
@ -61,6 +61,17 @@ define handle_quantum_painter_driver
|
|||
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
|
||||
$(DRIVER_PATH)/painter/ili9xxx/qp_ili9341.c \
|
||||
|
||||
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),ili9488_spi)
|
||||
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
|
||||
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
|
||||
OPT_DEFS += -DQUANTUM_PAINTER_ILI9488_ENABLE -DQUANTUM_PAINTER_ILI9488_SPI_ENABLE
|
||||
COMMON_VPATH += \
|
||||
$(DRIVER_PATH)/painter/tft_panel \
|
||||
$(DRIVER_PATH)/painter/ili9xxx
|
||||
SRC += \
|
||||
$(DRIVER_PATH)/painter/tft_panel/qp_tft_panel.c \
|
||||
$(DRIVER_PATH)/painter/ili9xxx/qp_ili9488.c \
|
||||
|
||||
else ifeq ($$(strip $$(CURRENT_PAINTER_DRIVER)),st7789_spi)
|
||||
QUANTUM_PAINTER_NEEDS_COMMS_SPI := yes
|
||||
QUANTUM_PAINTER_NEEDS_COMMS_SPI_DC_RESET := yes
|
||||
|
|
|
|||
Loading…
Reference in a new issue