LED drivers: add support for shutdown pin (#23058)

* LED drivers: add support for shutdown pin

* Update candidate boards

drivers/led/issi/is31fl3218-mono.c

@@ -16,6 +16,7 @@
 
 #include "is31fl3218-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 
 #define IS31FL3218_PWM_REGISTER_COUNT 18
 #define IS31FL3218_LED_CONTROL_REGISTER_COUNT 3
@@ -66,6 +67,11 @@ void is31fl3218_write_pwm_buffer(void) {
 void is31fl3218_init(void) {
     i2c_init();
 
+#if defined(IS31FL3218_SDB_PIN)
+    setPinOutput(IS31FL3218_SDB_PIN);
+    writePinHigh(IS31FL3218_SDB_PIN);
+#endif
+
     // In case we ever want to reinitialize (?)
     is31fl3218_write_register(IS31FL3218_REG_RESET, 0x00);
 

drivers/led/issi/is31fl3218.c

@@ -16,6 +16,7 @@
 
 #include "is31fl3218.h"
 #include "i2c_master.h"
+#include "gpio.h"
 
 #define IS31FL3218_PWM_REGISTER_COUNT 18
 #define IS31FL3218_LED_CONTROL_REGISTER_COUNT 3
@@ -66,6 +67,11 @@ void is31fl3218_write_pwm_buffer(void) {
 void is31fl3218_init(void) {
     i2c_init();
 
+#if defined(IS31FL3218_SDB_PIN)
+    setPinOutput(IS31FL3218_SDB_PIN);
+    writePinHigh(IS31FL3218_SDB_PIN);
+#endif
+
     // In case we ever want to reinitialize (?)
     is31fl3218_write_register(IS31FL3218_REG_RESET, 0x00);
 

drivers/led/issi/is31fl3731-mono.c

@@ -19,6 +19,7 @@
 
 #include "is31fl3731-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3731_PWM_REGISTER_COUNT 144
@@ -97,6 +98,11 @@ void is31fl3731_write_pwm_buffer(uint8_t index) {
 void is31fl3731_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3731_SDB_PIN)
+    setPinOutput(IS31FL3731_SDB_PIN);
+    writePinHigh(IS31FL3731_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3731_DRIVER_COUNT; i++) {
         is31fl3731_init(i);
     }

drivers/led/issi/is31fl3731.c

@@ -18,6 +18,7 @@
 
 #include "is31fl3731.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3731_PWM_REGISTER_COUNT 144
@@ -96,6 +97,11 @@ void is31fl3731_write_pwm_buffer(uint8_t index) {
 void is31fl3731_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3731_SDB_PIN)
+    setPinOutput(IS31FL3731_SDB_PIN);
+    writePinHigh(IS31FL3731_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3731_DRIVER_COUNT; i++) {
         is31fl3731_init(i);
     }

drivers/led/issi/is31fl3733-mono.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3733-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3733_PWM_REGISTER_COUNT 192
@@ -142,6 +143,11 @@ void is31fl3733_write_pwm_buffer(uint8_t index) {
 void is31fl3733_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3733_SDB_PIN)
+    setPinOutput(IS31FL3733_SDB_PIN);
+    writePinHigh(IS31FL3733_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3733_DRIVER_COUNT; i++) {
         is31fl3733_init(i);
     }

drivers/led/issi/is31fl3733.c

@@ -19,6 +19,7 @@
 
 #include "is31fl3733.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3733_PWM_REGISTER_COUNT 192
@@ -141,6 +142,11 @@ void is31fl3733_write_pwm_buffer(uint8_t index) {
 void is31fl3733_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3733_SDB_PIN)
+    setPinOutput(IS31FL3733_SDB_PIN);
+    writePinHigh(IS31FL3733_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3733_DRIVER_COUNT; i++) {
         is31fl3733_init(i);
     }

drivers/led/issi/is31fl3736-mono.c

@@ -17,6 +17,7 @@
 
 #include "is31fl3736-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3736_PWM_REGISTER_COUNT 192 // actually 96
@@ -113,6 +114,11 @@ void is31fl3736_write_pwm_buffer(uint8_t index) {
 void is31fl3736_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3736_SDB_PIN)
+    setPinOutput(IS31FL3736_SDB_PIN);
+    writePinHigh(IS31FL3736_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3736_DRIVER_COUNT; i++) {
         is31fl3736_init(i);
     }

drivers/led/issi/is31fl3736.c

@@ -17,6 +17,7 @@
 
 #include "is31fl3736.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3736_PWM_REGISTER_COUNT 192 // actually 96
@@ -113,6 +114,11 @@ void is31fl3736_write_pwm_buffer(uint8_t index) {
 void is31fl3736_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3736_SDB_PIN)
+    setPinOutput(IS31FL3736_SDB_PIN);
+    writePinHigh(IS31FL3736_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3736_DRIVER_COUNT; i++) {
         is31fl3736_init(i);
     }

drivers/led/issi/is31fl3737-mono.c

@@ -19,6 +19,7 @@
 
 #include "is31fl3737-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3737_PWM_REGISTER_COUNT 192 // actually 144
@@ -115,6 +116,11 @@ void is31fl3737_write_pwm_buffer(uint8_t index) {
 void is31fl3737_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3737_SDB_PIN)
+    setPinOutput(IS31FL3737_SDB_PIN);
+    writePinHigh(IS31FL3737_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3737_DRIVER_COUNT; i++) {
         is31fl3737_init(i);
     }

drivers/led/issi/is31fl3737.c

@@ -19,6 +19,7 @@
 
 #include "is31fl3737.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3737_PWM_REGISTER_COUNT 192 // actually 144
@@ -115,6 +116,11 @@ void is31fl3737_write_pwm_buffer(uint8_t index) {
 void is31fl3737_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3737_SDB_PIN)
+    setPinOutput(IS31FL3737_SDB_PIN);
+    writePinHigh(IS31FL3737_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3737_DRIVER_COUNT; i++) {
         is31fl3737_init(i);
     }

drivers/led/issi/is31fl3741-mono.c

@@ -19,6 +19,7 @@
 
 #include "is31fl3741-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3741_PWM_0_REGISTER_COUNT 180
@@ -141,6 +142,11 @@ void is31fl3741_write_pwm_buffer(uint8_t index) {
 void is31fl3741_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3741_SDB_PIN)
+    setPinOutput(IS31FL3741_SDB_PIN);
+    writePinHigh(IS31FL3741_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3741_DRIVER_COUNT; i++) {
         is31fl3741_init(i);
     }

drivers/led/issi/is31fl3741.c

@@ -19,6 +19,7 @@
 
 #include "is31fl3741.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3741_PWM_0_REGISTER_COUNT 180
@@ -141,6 +142,11 @@ void is31fl3741_write_pwm_buffer(uint8_t index) {
 void is31fl3741_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3741_SDB_PIN)
+    setPinOutput(IS31FL3741_SDB_PIN);
+    writePinHigh(IS31FL3741_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3741_DRIVER_COUNT; i++) {
         is31fl3741_init(i);
     }

drivers/led/issi/is31fl3742a-mono.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3742a-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3742A_PWM_REGISTER_COUNT 180
@@ -114,6 +115,11 @@ void is31fl3742a_write_pwm_buffer(uint8_t index) {
 void is31fl3742a_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3742A_SDB_PIN)
+    setPinOutput(IS31FL3742A_SDB_PIN);
+    writePinHigh(IS31FL3742A_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3742A_DRIVER_COUNT; i++) {
         is31fl3742a_init(i);
     }

drivers/led/issi/is31fl3742a.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3742a.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3742A_PWM_REGISTER_COUNT 180
@@ -114,6 +115,11 @@ void is31fl3742a_write_pwm_buffer(uint8_t index) {
 void is31fl3742a_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3742A_SDB_PIN)
+    setPinOutput(IS31FL3742A_SDB_PIN);
+    writePinHigh(IS31FL3742A_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3742A_DRIVER_COUNT; i++) {
         is31fl3742a_init(i);
     }

drivers/led/issi/is31fl3743a-mono.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3743a-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3743A_PWM_REGISTER_COUNT 198
@@ -136,6 +137,11 @@ void is31fl3743a_write_pwm_buffer(uint8_t index) {
 void is31fl3743a_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3743A_SDB_PIN)
+    setPinOutput(IS31FL3743A_SDB_PIN);
+    writePinHigh(IS31FL3743A_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3743A_DRIVER_COUNT; i++) {
         is31fl3743a_init(i);
     }

drivers/led/issi/is31fl3743a.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3743a.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3743A_PWM_REGISTER_COUNT 198
@@ -136,6 +137,11 @@ void is31fl3743a_write_pwm_buffer(uint8_t index) {
 void is31fl3743a_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3743A_SDB_PIN)
+    setPinOutput(IS31FL3743A_SDB_PIN);
+    writePinHigh(IS31FL3743A_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3743A_DRIVER_COUNT; i++) {
         is31fl3743a_init(i);
     }

drivers/led/issi/is31fl3745-mono.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3745-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3745_PWM_REGISTER_COUNT 144
@@ -136,6 +137,11 @@ void is31fl3745_write_pwm_buffer(uint8_t index) {
 void is31fl3745_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3745_SDB_PIN)
+    setPinOutput(IS31FL3745_SDB_PIN);
+    writePinHigh(IS31FL3745_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3745_DRIVER_COUNT; i++) {
         is31fl3745_init(i);
     }

drivers/led/issi/is31fl3745.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3745.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3745_PWM_REGISTER_COUNT 144
@@ -136,6 +137,11 @@ void is31fl3745_write_pwm_buffer(uint8_t index) {
 void is31fl3745_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3745_SDB_PIN)
+    setPinOutput(IS31FL3745_SDB_PIN);
+    writePinHigh(IS31FL3745_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3745_DRIVER_COUNT; i++) {
         is31fl3745_init(i);
     }

drivers/led/issi/is31fl3746a-mono.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3746a-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3746A_PWM_REGISTER_COUNT 72
@@ -114,6 +115,11 @@ void is31fl3746a_write_pwm_buffer(uint8_t index) {
 void is31fl3746a_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3746A_SDB_PIN)
+    setPinOutput(IS31FL3746A_SDB_PIN);
+    writePinHigh(IS31FL3746A_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3746A_DRIVER_COUNT; i++) {
         is31fl3746a_init(i);
     }

drivers/led/issi/is31fl3746a.c

@@ -20,6 +20,7 @@
 
 #include "is31fl3746a.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3746A_PWM_REGISTER_COUNT 72
@@ -114,6 +115,11 @@ void is31fl3746a_write_pwm_buffer(uint8_t index) {
 void is31fl3746a_init_drivers(void) {
     i2c_init();
 
+#if defined(IS31FL3746A_SDB_PIN)
+    setPinOutput(IS31FL3746A_SDB_PIN);
+    writePinHigh(IS31FL3746A_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < IS31FL3746A_DRIVER_COUNT; i++) {
         is31fl3746a_init(i);
     }

drivers/led/snled27351-mono.c

@@ -16,6 +16,7 @@
 
 #include "snled27351-mono.h"
 #include "i2c_master.h"
+#include "gpio.h"
 
 #define SNLED27351_PWM_REGISTER_COUNT 192
 #define SNLED27351_LED_CONTROL_REGISTER_COUNT 24
@@ -103,6 +104,11 @@ void snled27351_write_pwm_buffer(uint8_t index) {
 void snled27351_init_drivers(void) {
     i2c_init();
 
+#if defined(SNLED27351_SDB_PIN)
+    setPinOutput(SNLED27351_SDB_PIN);
+    writePinHigh(SNLED27351_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < SNLED27351_DRIVER_COUNT; i++) {
         snled27351_init(i);
     }

drivers/led/snled27351.c

@@ -16,6 +16,7 @@
 
 #include "snled27351.h"
 #include "i2c_master.h"
+#include "gpio.h"
 
 #define SNLED27351_PWM_REGISTER_COUNT 192
 #define SNLED27351_LED_CONTROL_REGISTER_COUNT 24
@@ -103,6 +104,11 @@ void snled27351_write_pwm_buffer(uint8_t index) {
 void snled27351_init_drivers(void) {
     i2c_init();
 
+#if defined(SNLED27351_SDB_PIN)
+    setPinOutput(SNLED27351_SDB_PIN);
+    writePinHigh(SNLED27351_SDB_PIN);
+#endif
+
     for (uint8_t i = 0; i < SNLED27351_DRIVER_COUNT; i++) {
         snled27351_init(i);
     }

keyboards/exclusive/e6_rgb/config.h

@@ -5,3 +5,4 @@
 #pragma once
 
 #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND
+#define IS31FL3733_SDB_PIN D5

keyboards/exclusive/e6_rgb/e6_rgb.c

@@ -1,12 +1,6 @@
 #include "quantum.h"
 
 #ifdef RGB_MATRIX_ENABLE
-void matrix_init_kb(void) {
-  setPinOutput(D5);
-  writePinHigh(D5);
-  matrix_init_user();
-}
-
 const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver

keyboards/input_club/ergodox_infinity/config.h

@@ -44,6 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* LED matrix driver */
 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
+#define IS31FL3731_SDB_PIN B16
 
 /* i2c (for LED matrix) */
 #define I2C1_CLOCK_SPEED 400000

keyboards/input_club/ergodox_infinity/ergodox_infinity.c

@@ -95,11 +95,6 @@ __attribute__ ((weak)) void matrix_scan_user(void) {}
 
 
 void keyboard_pre_init_kb(void) {
-#ifdef LED_MATRIX_ENABLE
-    // Turn on LED controller
-    setPinOutput(B16);
-    writePinHigh(B16);
-#endif
     // The backlight always has to be initialized, otherwise it will stay lit
     lcd_backlight_hal_init();
 #ifdef ST7565_ENABLE

keyboards/input_club/k_type/config.h

@@ -50,3 +50,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND
 #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_GND
+#define IS31FL3733_SDB_PIN B16

keyboards/input_club/k_type/is31fl3733-dual.c

@@ -18,6 +18,7 @@
 
 #include "is31fl3733-dual.h"
 #include "i2c_master.h"
+#include "gpio.h"
 #include "wait.h"
 
 #define IS31FL3733_PWM_REGISTER_COUNT 192
@@ -126,6 +127,11 @@ void is31fl3733_write_pwm_buffer(uint8_t bus, uint8_t index) {
 }
 
 void is31fl3733_init_drivers(void) {
+#if defined(IS31FL3733_SDB_PIN)
+    setPinOutput(IS31FL3733_SDB_PIN);
+    writePinHigh(IS31FL3733_SDB_PIN);
+#endif
+
     i2c_init(&I2CD1, I2C1_SCL_PIN, I2C1_SDA_PIN);
 
     is31fl3733_init(0, 0);

keyboards/input_club/k_type/k_type.c

@@ -201,14 +201,6 @@ led_config_t g_led_config = {
     }
 };
 
-void keyboard_pre_init_kb(void) {
-    // Turn on LED controller
-    setPinOutput(B16);
-    writePinHigh(B16);
-
-    keyboard_pre_init_user();
-}
-
 void matrix_init_kb(void) {
     // put your keyboard start-up code here
     // runs once when the firmware starts up

keyboards/input_club/whitefox/config.h

@@ -22,6 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* LED matrix driver */
 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
+#define IS31FL3731_SDB_PIN B16
 
 /* i2c (for LED matrix) */
 #define I2C1_CLOCK_SPEED 400000

keyboards/input_club/whitefox/whitefox.c

@@ -65,15 +65,6 @@ led_config_t g_led_config = {
 };
 #endif
 
-void keyboard_pre_init_kb(void) {
-#ifdef LED_MATRIX_ENABLE
-    // Turn on LED controller
-    setPinOutput(B16);
-    writePinHigh(B16);
-#endif
-    keyboard_pre_init_user();
-}
-
 void matrix_init_kb(void) {
     // put your keyboard start-up code here
     // runs once when the firmware starts up

keyboards/melgeek/mach80/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN B7

keyboards/melgeek/mach80/rev1/rev1.c

@@ -183,11 +183,4 @@ void matrix_init_kb(void) {
 
     matrix_init_user();
 }
-
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(B7);
-    writePinHigh(B7);
-    keyboard_pre_init_user();
-}
 #endif

keyboards/melgeek/mach80/rev2/rev2.c

@@ -181,11 +181,4 @@ void matrix_init_kb(void) {
 
     matrix_init_user();
 }
-
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(B7);
-    writePinHigh(B7);
-    keyboard_pre_init_user();
-}
 #endif

keyboards/melgeek/mj61/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN A2

keyboards/melgeek/mj61/rev1/rev1.c

@@ -116,9 +116,3 @@ void suspend_wakeup_init_kb(void) {
     suspend_wakeup_init_user();
 }
 #endif
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}

keyboards/melgeek/mj61/rev2/rev2.c

@@ -126,9 +126,3 @@ void suspend_wakeup_init_kb(void) {
     suspend_wakeup_init_user();
 }
 #endif
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}

keyboards/melgeek/mj63/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN A2

keyboards/melgeek/mj63/rev1/rev1.c

@@ -119,12 +119,4 @@ void suspend_wakeup_init_kb(void) {
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}
-
 #endif
-

keyboards/melgeek/mj63/rev2/rev2.c

@@ -126,9 +126,3 @@ void suspend_wakeup_init_kb(void) {
     suspend_wakeup_init_user();
 }
 #endif
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}

keyboards/melgeek/mj64/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN A2

keyboards/melgeek/mj64/rev1/rev1.c

@@ -116,11 +116,4 @@ void suspend_wakeup_init_kb(void) {
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}
-
 #endif

keyboards/melgeek/mj64/rev2/rev2.c

@@ -119,12 +119,4 @@ void suspend_wakeup_init_kb(void) {
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}
-
 #endif
-

keyboards/melgeek/mj64/rev3/rev3.c

@@ -126,9 +126,3 @@ void suspend_wakeup_init_kb(void) {
     suspend_wakeup_init_user();
 }
 #endif
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}

keyboards/melgeek/mj65/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN A2

keyboards/melgeek/mj65/rev3/rev3.c

@@ -131,9 +131,3 @@ void suspend_wakeup_init_kb(void) {
 }
 
 #endif 
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}

keyboards/melgeek/mojo68/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN B7

keyboards/melgeek/mojo68/rev1/rev1.c

@@ -151,11 +151,4 @@ void matrix_init_kb(void) {
 
     matrix_init_user();
 }
-
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(B7);
-    writePinHigh(B7);
-    keyboard_pre_init_user();
-}
 #endif

keyboards/melgeek/mojo75/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN A2

keyboards/melgeek/mojo75/rev1/rev1.c

@@ -149,12 +149,4 @@ void suspend_wakeup_init_kb(void) {
     rgb_matrix_set_suspend_state(false);
     suspend_wakeup_init_user();
 }
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(A2);
-    writePinHigh(A2);
-    keyboard_pre_init_user();
-}
-
 #endif
-

keyboards/melgeek/tegic/config.h

@@ -17,3 +17,4 @@
 #pragma once
 
 #define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND
+#define IS31FL3741_SDB_PIN B7

keyboards/melgeek/tegic/rev1/rev1.c

@@ -142,14 +142,4 @@ led_config_t g_led_config = {
 		   4,         4,         4,        4,        4,        4,        4,         4,         4,         4,         4,         4,      
 	}
 };
-
-
-
-
 #endif
-
-void keyboard_pre_init_kb(void) {
-    setPinOutput(B7);
-    writePinHigh(B7);
-    keyboard_pre_init_user();
-}

keyboards/opendeck/32/rev1/config.h

@@ -16,6 +16,8 @@
 #pragma once
 
 #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
+#define IS31FL3731_SDB_PIN D2
+#define IS31FL3731_IRQ_PIN D3
 
 #define RGB_MATRIX_DISABLE_KEYCODES
 

keyboards/opendeck/32/rev1/rev1.c

@@ -93,13 +93,9 @@ void keyboard_pre_init_kb(void) {
     setPinOutput(POWER_LED_PIN);
     writePinLow(POWER_LED_PIN);
 
-    // Enable RGB driver IC
-    setPinOutput(RGB_DISABLE_N_PIN);
-    writePinHigh(RGB_DISABLE_N_PIN);
-
     // We don't use this feature of the IS31FL3731 but it is electrically connected
     // Make sure not to drive it
-    setPinInput(RGB_IRQ_N_PIN);
+    setPinInput(IS31FL3731_IRQ_PIN);
 
     keyboard_pre_init_user();
 }

keyboards/opendeck/32/rev1/rev1.h

@@ -19,8 +19,6 @@
 #include "quantum.h"
 
 #define POWER_LED_PIN F1
-#define RGB_DISABLE_N_PIN D2
-#define RGB_IRQ_N_PIN D3
 
 // If you want something similar to what Taran from LMG does in https://github.com/TaranVH/2nd-keyboard
 // you can create a "wrapper key" by uncommenting the row below and chosing your wrapper keycode.

keyboards/skyloong/gk61/pro/config.h

@@ -4,9 +4,9 @@
 #pragma once
 
 #define IS31FL3743A_I2C_ADDRESS_1 IS31FL3743A_I2C_ADDRESS_GND_GND
+#define IS31FL3743A_SDB_PIN C1
 
 #define CAPS_LOCK_INDEX 28
 #define WIN_MOD_INDEX 16
 #define MAC_MOD_INDEX 17
 #define WIN_LOCK_INDEX 54
-#define SDB C1 //RGB matrix Power control PIN

keyboards/skyloong/gk61/pro/pro.c

@@ -213,14 +213,14 @@ bool rgb_matrix_indicators_advanced_kb(uint8_t led_min, uint8_t led_max) {
 
 void suspend_power_down_kb() {
 #    ifdef RGB_MATRIX_ENABLE
-    writePinLow(SDB);
+    writePinLow(IS31FL3743A_SDB_PIN);
 #    endif
      suspend_power_down_user();
 }
 
 void suspend_wakeup_init_kb() {
 #    ifdef RGB_MATRIX_ENABLE
-    writePinHigh(SDB);
+    writePinHigh(IS31FL3743A_SDB_PIN);
 #    endif
      suspend_wakeup_init_user();
 }
@@ -228,8 +228,4 @@ void suspend_wakeup_init_kb() {
 void board_init(void) {
     // JTAG-DP Disabled and SW-DP Disabled
     AFIO->MAPR = (AFIO->MAPR & ~AFIO_MAPR_SWJ_CFG_Msk) | AFIO_MAPR_SWJ_CFG_DISABLE;
-#    ifdef RGB_MATRIX_ENABLE
-    setPinOutput(SDB);
-    writePinHigh(SDB);
-#   endif
 }

keyboards/skyloong/gk61/pro_48/config.h

@@ -4,10 +4,10 @@
 #pragma once
 
 #define IS31FL3743A_I2C_ADDRESS_1 IS31FL3743A_I2C_ADDRESS_GND_GND
+#define IS31FL3743A_SDB_PIN A4
 
 #define CAPS_LOCK_INDEX 28
 #define WIN_MOD_INDEX 16
 #define MAC_MOD_INDEX 17
-#define SDB A4
 
 #define g_suspend_state rgb_matrix_get_suspend_state()

keyboards/skyloong/gk61/pro_48/pro_48.c

@@ -149,12 +149,12 @@ bool rgb_matrix_indicators_advanced_kb(uint8_t led_min, uint8_t led_max) {
 
 
 void suspend_power_down_kb(void) {
-    writePinLow(SDB);
+    writePinLow(IS31FL3743A_SDB_PIN);
     suspend_power_down_user();
 }
 
 void suspend_wakeup_init_kb(void) {
-    writePinHigh(SDB);
+    writePinHigh(IS31FL3743A_SDB_PIN);
     suspend_wakeup_init_user();
 }
 #endif
@@ -220,8 +220,4 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 void board_init(void) {
     // JTAG-DP Disabled and SW-DP Disabled
     AFIO->MAPR = (AFIO->MAPR & ~AFIO_MAPR_SWJ_CFG_Msk) | AFIO_MAPR_SWJ_CFG_DISABLE;
-#    ifdef RGB_MATRIX_ENABLE
-    setPinOutput(SDB);
-    writePinHigh(SDB);
-#   endif
 }

keyboards/skyloong/gk61/v1/config.h

@@ -16,5 +16,4 @@
 #pragma once
 
 #define SNLED27351_I2C_ADDRESS_1 SNLED27351_I2C_ADDRESS_GND
-
+#define SNLED27351_SDB_PIN C1
-#define SDB C1

keyboards/skyloong/gk61/v1/v1.c

@@ -102,18 +102,13 @@ const snled27351_led_t PROGMEM g_snled27351_leds[SNLED27351_LED_COUNT] = {
 #endif // RGB_MATRIX_ENABLE
 
 void suspend_power_down_kb() {
-    writePinLow(SDB);
+    writePinLow(SNLED27351_SDB_PIN);
 
     suspend_power_down_user();
 }
 
 void suspend_wakeup_init_kb() {
-    writePinHigh(SDB);
+    writePinHigh(SNLED27351_SDB_PIN);
 
     suspend_wakeup_init_user();
 }
-
-void board_init(void) {
-    setPinOutput(SDB);
-    writePinHigh(SDB);
-}

keyboards/teleport/native/config.h

@@ -26,6 +26,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND
 #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_VCC
+#define IS31FL3733_SDB_PIN B9
 
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CUSTOM_SINGLE_COLOR_RAINDROPS
 

keyboards/teleport/native/native.c

@@ -16,14 +16,6 @@
 
 #include "quantum.h"
 
-/* This board has !SDB of the is31 wired to D2. Set high to enable */
-void keyboard_post_init_kb(void) {
-    setPinOutput(B9);
-    writePinHigh(B9);
-    
-    keyboard_post_init_user();
-}
-
 #ifdef RGB_MATRIX_ENABLE
 const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = {
     /* Refer to IS31 manual for these locations