Remove legacy AVR ssd1306 driver (#17864)

This commit is contained in:
Joel Challis 2022-07-31 22:15:01 +01:00 committed by GitHub
parent f7aaed1b57
commit 98d5c77521
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
8 changed files with 0 additions and 1123 deletions

View file

@ -1,159 +0,0 @@
#include <util/twi.h>
#include <avr/io.h>
#include <stdlib.h>
#include <avr/interrupt.h>
#include <util/twi.h>
#include <stdbool.h>
#include "i2c.h"
// Limits the amount of we wait for any one i2c transaction.
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
// 9 bits, a single transaction will take around 90μs to complete.
//
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
// poll loop takes at least 8 clock cycles to execute
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
static volatile uint8_t slave_buffer_pos;
static volatile bool slave_has_register_set = false;
// Wait for an i2c operation to finish
inline static
void i2c_delay(void) {
uint16_t lim = 0;
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
lim++;
// easier way, but will wait slightly longer
// _delay_us(100);
}
// Setup twi to run at 100kHz
void i2c_master_init(void) {
// no prescaler
TWSR = 0;
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
// Check datasheets for more info.
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
}
// Start a transaction with the given i2c slave address. The direction of the
// transfer is set with I2C_READ and I2C_WRITE.
// returns: 0 => success
// 1 => error
uint8_t i2c_master_start(uint8_t address) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
i2c_delay();
// check that we started successfully
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
return 1;
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
return 1; // slave did not acknowledge
else
return 0; // success
}
// Finish the i2c transaction.
void i2c_master_stop(void) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
uint16_t lim = 0;
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
lim++;
}
// Write one byte to the i2c slave.
// returns 0 => slave ACK
// 1 => slave NACK
uint8_t i2c_master_write(uint8_t data) {
TWDR = data;
TWCR = (1<<TWINT) | (1<<TWEN);
i2c_delay();
// check if the slave acknowledged us
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
}
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
// if ack=0 the acknowledge bit is not set.
// returns: byte read from i2c device
uint8_t i2c_master_read(int ack) {
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
i2c_delay();
return TWDR;
}
void i2c_reset_state(void) {
TWCR = 0;
}
void i2c_slave_init(uint8_t address) {
TWAR = address << 0; // slave i2c address
// TWEN - twi enable
// TWEA - enable address acknowledgement
// TWINT - twi interrupt flag
// TWIE - enable the twi interrupt
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
}
ISR(TWI_vect);
ISR(TWI_vect) {
uint8_t ack = 1;
switch(TW_STATUS) {
case TW_SR_SLA_ACK:
// this device has been addressed as a slave receiver
slave_has_register_set = false;
break;
case TW_SR_DATA_ACK:
// this device has received data as a slave receiver
// The first byte that we receive in this transaction sets the location
// of the read/write location of the slaves memory that it exposes over
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
// slave_buffer_pos after each write.
if(!slave_has_register_set) {
slave_buffer_pos = TWDR;
// don't acknowledge the master if this memory loctaion is out of bounds
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
ack = 0;
slave_buffer_pos = 0;
}
slave_has_register_set = true;
} else {
i2c_slave_buffer[slave_buffer_pos] = TWDR;
BUFFER_POS_INC();
}
break;
case TW_ST_SLA_ACK:
case TW_ST_DATA_ACK:
// master has addressed this device as a slave transmitter and is
// requesting data.
TWDR = i2c_slave_buffer[slave_buffer_pos];
BUFFER_POS_INC();
break;
case TW_BUS_ERROR: // something went wrong, reset twi state
TWCR = 0;
default:
break;
}
// Reset everything, so we are ready for the next TWI interrupt
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
}

View file

@ -1,28 +0,0 @@
#pragma once
#include <stdint.h>
#ifndef F_CPU
#define F_CPU 16000000UL
#endif
#define I2C_READ 1
#define I2C_WRITE 0
#define I2C_ACK 1
#define I2C_NACK 0
#define SLAVE_BUFFER_SIZE 0x10
// i2c SCL clock frequency
#define SCL_CLOCK 400000L
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
void i2c_master_init(void);
uint8_t i2c_master_start(uint8_t address);
void i2c_master_stop(void);
uint8_t i2c_master_write(uint8_t data);
uint8_t i2c_master_read(int);
void i2c_reset_state(void);
void i2c_slave_init(uint8_t address);

View file

@ -1,58 +0,0 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
/* Use I2C or Serial, not both */
#define USE_I2C
//#define USE_SERIAL
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define FLIP_HALF
#define SSD1306OLED
//#define OLED_ROTATE180
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 100
#ifdef SUBPROJECT_rev1
#include "../../rev1/config.h"
#endif
#ifdef SUBPROJECT_rev2
#include "../../rev2/config.h"
#endif
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 6
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#endif

View file

@ -1,415 +0,0 @@
#include QMK_KEYBOARD_H
#include <LUFA/Drivers/Peripheral/TWI.h>
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _COLEMAK 1
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
ADJUST,
BACKLIT,
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
M_SAMPLE
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_QWERTY] = LAYOUT( \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_COLEMAK] = LAYOUT( \
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Dvorak
* ,-----------------------------------------------------------------------------------.
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
[_DVORAK] = LAYOUT( \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT( \
_______, RESET, _______, M_SAMPLE, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
// define variables for reactive RGB
bool TOG_STATUS = false;
int RGB_current_mode;
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
rgblight_mode(RGB_current_mode);
layer_on(layer3);
} else {
layer_off(layer3);
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_colemak);
#endif
persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_dvorak);
#endif
persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
rgblight_mode(16);
}
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
TOG_STATUS = false;
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
rgblight_mode(15);
}
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
layer_off(_RAISE);
TOG_STATUS = false;
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
return false;
break;
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
case RGB_MOD:
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
return false;
break;
case M_SAMPLE:
if (record->event.pressed){
SEND_STRING("hello world");
}
return false;
}
return true;
}
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
RGB_current_mode = rgblight_config.mode;
}
//SSD1306 OLED init and update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
void matrix_master_OLED_init (void) {
TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
iota_gfx_init(); // turns on the display
}
void matrix_scan_user(void) {
iota_gfx_task(); // this is what updates the display continuously
}
#endif
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(20); // gets rid of tick
PLAY_SONG(tone_startup);
}
void shutdown_user()
{
PLAY_SONG(tone_goodbye);
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_SONG(music_scale);
}
#endif
void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
//assign the right code to your layers for OLED display
#define L_BASE 0
#define L_LOWER 8
#define L_RAISE 16
#define L_FNLAYER 64
#define L_NUMLAY 128
#define L_NLOWER 136
#define L_NFNLAYER 192
#define L_MOUSECURSOR 256
#define L_ADJUST 65560
void iota_gfx_task_user(void) {
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_write_P(&matrix, PSTR("USB: "));
#ifdef PROTOCOL_LUFA
switch (USB_DeviceState) {
case DEVICE_STATE_Unattached:
matrix_write_P(&matrix, PSTR("Unattached"));
break;
case DEVICE_STATE_Suspended:
matrix_write_P(&matrix, PSTR("Suspended"));
break;
case DEVICE_STATE_Configured:
matrix_write_P(&matrix, PSTR("Connected"));
break;
case DEVICE_STATE_Powered:
matrix_write_P(&matrix, PSTR("Powered"));
break;
case DEVICE_STATE_Default:
matrix_write_P(&matrix, PSTR("Default"));
break;
case DEVICE_STATE_Addressed:
matrix_write_P(&matrix, PSTR("Addressed"));
break;
default:
matrix_write_P(&matrix, PSTR("Invalid"));
}
#endif
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
char buf[40];
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
matrix_write_P(&matrix, PSTR("\n\nLayer: "));
switch (layer_state) {
case L_BASE:
matrix_write_P(&matrix, PSTR("Default"));
break;
case L_RAISE:
matrix_write_P(&matrix, PSTR("Raise"));
break;
case L_LOWER:
matrix_write_P(&matrix, PSTR("Lower"));
break;
case L_ADJUST:
matrix_write_P(&matrix, PSTR("ADJUST"));
break;
default:
matrix_write(&matrix, buf);
}
// Host Keyboard LED Status
char led[40];
snprintf(led, sizeof(led), "\n%s %s %s",
(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
(host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
matrix_write(&matrix, led);
matrix_update(&display, &matrix);
}

View file

@ -1,25 +0,0 @@
SSD1306 OLED Display via I2C
======
Features
--------
Some features supported by the firmware:
* I2C connection between the two halves is required as the OLED display will use this connection as well. Note this
requires pull-up resistors on the data and clock lines.
* OLED display will connect from either side
Wiring
------
Work in progress...
OLED Configuration
-------------------------------
Work in progress...

View file

@ -1,22 +0,0 @@
SRC += ssd1306.c
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -1,329 +0,0 @@
#ifdef SSD1306OLED
# include "ssd1306.h"
# include "i2c.h"
# include <string.h>
# include "print.h"
# include "glcdfont.c"
# ifdef PROTOCOL_LUFA
# include "lufa.h"
# endif
# include "sendchar.h"
# include "timer.h"
struct CharacterMatrix display;
// Set this to 1 to help diagnose early startup problems
// when testing power-on with ble. Turn it off otherwise,
// as the latency of printing most of the debug info messes
// with the matrix scan, causing keys to drop.
# define DEBUG_TO_SCREEN 0
// static uint16_t last_battery_update;
// static uint32_t vbat;
//#define BatteryUpdateInterval 10000 /* milliseconds */
# define ScreenOffInterval 300000 /* milliseconds */
# if DEBUG_TO_SCREEN
static uint8_t displaying;
# endif
static uint16_t last_flush;
// Write command sequence.
// Returns true on success.
static inline bool _send_cmd1(uint8_t cmd) {
bool res = false;
if (i2c_start_write(SSD1306_ADDRESS)) {
xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
goto done;
}
if (i2c_master_write(0x0 /* command byte follows */)) {
print("failed to write control byte\n");
goto done;
}
if (i2c_master_write(cmd)) {
xprintf("failed to write command %d\n", cmd);
goto done;
}
res = true;
done:
i2c_master_stop();
return res;
}
// Write 2-byte command sequence.
// Returns true on success
static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
if (!_send_cmd1(cmd)) {
return false;
}
return _send_cmd1(opr);
}
// Write 3-byte command sequence.
// Returns true on success
static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
if (!_send_cmd1(cmd)) {
return false;
}
if (!_send_cmd1(opr1)) {
return false;
}
return _send_cmd1(opr2);
}
# define send_cmd1(c) \
if (!_send_cmd1(c)) { \
goto done; \
}
# define send_cmd2(c, o) \
if (!_send_cmd2(c, o)) { \
goto done; \
}
# define send_cmd3(c, o1, o2) \
if (!_send_cmd3(c, o1, o2)) { \
goto done; \
}
static void clear_display(void) {
matrix_clear(&display);
// Clear all of the display bits (there can be random noise
// in the RAM on startup)
send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
if (i2c_start_write(SSD1306_ADDRESS)) {
goto done;
}
if (i2c_master_write(0x40)) {
// Data mode
goto done;
}
for (uint8_t row = 0; row < MatrixRows; ++row) {
for (uint8_t col = 0; col < DisplayWidth; ++col) {
i2c_master_write(0);
}
}
display.dirty = false;
done:
i2c_master_stop();
}
# if DEBUG_TO_SCREEN
# undef sendchar
static int8_t capture_sendchar(uint8_t c) {
sendchar(c);
iota_gfx_write_char(c);
if (!displaying) {
iota_gfx_flush();
}
return 0;
}
# endif
bool iota_gfx_init(void) {
bool success = false;
send_cmd1(DisplayOff);
send_cmd2(SetDisplayClockDiv, 0x80);
send_cmd2(SetMultiPlex, DisplayHeight - 1);
send_cmd2(SetDisplayOffset, 0);
send_cmd1(SetStartLine | 0x0);
send_cmd2(SetChargePump, 0x14 /* Enable */);
send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
# ifdef OLED_ROTATE180
// the following Flip the display orientation 180 degrees
send_cmd1(SegRemap);
send_cmd1(ComScanInc);
# endif
# ifndef OLED_ROTATE180
// Flips the display orientation 0 degrees
send_cmd1(SegRemap | 0x1);
send_cmd1(ComScanDec);
# endif
send_cmd2(SetComPins, 0x2);
send_cmd2(SetContrast, 0x8f);
send_cmd2(SetPreCharge, 0xf1);
send_cmd2(SetVComDetect, 0x40);
send_cmd1(DisplayAllOnResume);
send_cmd1(NormalDisplay);
send_cmd1(DeActivateScroll);
send_cmd1(DisplayOn);
send_cmd2(SetContrast, 0); // Dim
clear_display();
success = true;
iota_gfx_flush();
# if DEBUG_TO_SCREEN
print_set_sendchar(capture_sendchar);
# endif
done:
return success;
}
bool iota_gfx_off(void) {
bool success = false;
send_cmd1(DisplayOff);
success = true;
done:
return success;
}
bool iota_gfx_on(void) {
bool success = false;
send_cmd1(DisplayOn);
success = true;
done:
return success;
}
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
*matrix->cursor = c;
++matrix->cursor;
if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
// We went off the end; scroll the display upwards by one line
memmove(&matrix->display[0], &matrix->display[1], MatrixCols * (MatrixRows - 1));
matrix->cursor = &matrix->display[MatrixRows - 1][0];
memset(matrix->cursor, ' ', MatrixCols);
}
}
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
matrix->dirty = true;
if (c == '\n') {
// Clear to end of line from the cursor and then move to the
// start of the next line
uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
while (cursor_col++ < MatrixCols) {
matrix_write_char_inner(matrix, ' ');
}
return;
}
matrix_write_char_inner(matrix, c);
}
void iota_gfx_write_char(uint8_t c) {
matrix_write_char(&display, c);
}
void matrix_write(struct CharacterMatrix *matrix, const char *data) {
const char *end = data + strlen(data);
while (data < end) {
matrix_write_char(matrix, *data);
++data;
}
}
void iota_gfx_write(const char *data) {
matrix_write(&display, data);
}
void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
while (true) {
uint8_t c = pgm_read_byte(data);
if (c == 0) {
return;
}
matrix_write_char(matrix, c);
++data;
}
}
void iota_gfx_write_P(const char *data) {
matrix_write_P(&display, data);
}
void matrix_clear(struct CharacterMatrix *matrix) {
memset(matrix->display, ' ', sizeof(matrix->display));
matrix->cursor = &matrix->display[0][0];
matrix->dirty = true;
}
void iota_gfx_clear_screen(void) {
matrix_clear(&display);
}
void matrix_render(struct CharacterMatrix *matrix) {
last_flush = timer_read();
iota_gfx_on();
# if DEBUG_TO_SCREEN
++displaying;
# endif
// Move to the home position
send_cmd3(PageAddr, 0, MatrixRows - 1);
send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
if (i2c_start_write(SSD1306_ADDRESS)) {
goto done;
}
if (i2c_master_write(0x40)) {
// Data mode
goto done;
}
for (uint8_t row = 0; row < MatrixRows; ++row) {
for (uint8_t col = 0; col < MatrixCols; ++col) {
const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
uint8_t colBits = pgm_read_byte(glyph + glyphCol);
i2c_master_write(colBits);
}
// 1 column of space between chars (it's not included in the glyph)
i2c_master_write(0);
}
}
matrix->dirty = false;
done:
i2c_master_stop();
# if DEBUG_TO_SCREEN
--displaying;
# endif
}
void iota_gfx_flush(void) {
matrix_render(&display);
}
__attribute__((weak)) void iota_gfx_task_user(void) {}
void iota_gfx_task(void) {
iota_gfx_task_user();
if (display.dirty) {
iota_gfx_flush();
}
if (timer_elapsed(last_flush) > ScreenOffInterval) {
iota_gfx_off();
}
}
#endif

View file

@ -1,87 +0,0 @@
#pragma once
#include <stdbool.h>
#include <stdio.h>
#include "config.h"
enum ssd1306_cmds {
DisplayOff = 0xAE,
DisplayOn = 0xAF,
SetContrast = 0x81,
DisplayAllOnResume = 0xA4,
DisplayAllOn = 0xA5,
NormalDisplay = 0xA6,
InvertDisplay = 0xA7,
SetDisplayOffset = 0xD3,
SetComPins = 0xda,
SetVComDetect = 0xdb,
SetDisplayClockDiv = 0xD5,
SetPreCharge = 0xd9,
SetMultiPlex = 0xa8,
SetLowColumn = 0x00,
SetHighColumn = 0x10,
SetStartLine = 0x40,
SetMemoryMode = 0x20,
ColumnAddr = 0x21,
PageAddr = 0x22,
ComScanInc = 0xc0,
ComScanDec = 0xc8,
SegRemap = 0xa0,
SetChargePump = 0x8d,
ExternalVcc = 0x01,
SwitchCapVcc = 0x02,
ActivateScroll = 0x2f,
DeActivateScroll = 0x2e,
SetVerticalScrollArea = 0xa3,
RightHorizontalScroll = 0x26,
LeftHorizontalScroll = 0x27,
VerticalAndRightHorizontalScroll = 0x29,
VerticalAndLeftHorizontalScroll = 0x2a,
};
// Controls the SSD1306 128x32 OLED display via i2c
#ifndef SSD1306_ADDRESS
# define SSD1306_ADDRESS 0x3C
#endif
#define DisplayHeight 32
#define DisplayWidth 128
#define FontHeight 8
#define FontWidth 6
#define MatrixRows (DisplayHeight / FontHeight)
#define MatrixCols (DisplayWidth / FontWidth)
struct CharacterMatrix {
uint8_t display[MatrixRows][MatrixCols];
uint8_t *cursor;
bool dirty;
};
extern struct CharacterMatrix display;
bool iota_gfx_init(void);
void iota_gfx_task(void);
bool iota_gfx_off(void);
bool iota_gfx_on(void);
void iota_gfx_flush(void);
void iota_gfx_write_char(uint8_t c);
void iota_gfx_write(const char *data);
void iota_gfx_write_P(const char *data);
void iota_gfx_clear_screen(void);
void iota_gfx_task_user(void);
void matrix_clear(struct CharacterMatrix *matrix);
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
void matrix_write(struct CharacterMatrix *matrix, const char *data);
void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
void matrix_render(struct CharacterMatrix *matrix);