[Keyboard] Adds support for BM16S keyboard (#5659)

* Added support for BM16S keyboard.

* Update keyboards/bm16s/bm16s.h

Co-Authored-By: bontakun <ben@bontakun.net>

* Update keyboards/bm16s/bm16s.h

Co-Authored-By: bontakun <ben@bontakun.net>

* Cleaned up a bunch of unneeded stuff.

* Made layout name match.

* Changed rules file to have correct bootloader and indention. Updated readme to reflect availability on krepublic. Updated keymap to have more obvious RGB controls.

* Removed unnecessary file.

* Fixed grammar in readme.

Co-Authored-By: bontakun <ben@bontakun.net>

* Migrated to autogenerated layout config, without issue.

* Renamed LAYOUT to match community standards.
This commit is contained in:
Benjamin 2019-04-30 19:29:51 -07:00 committed by Drashna Jaelre
parent d67b99ff3c
commit 8725197ad6
7 changed files with 212 additions and 0 deletions

15
keyboards/bm16s/bm16s.h Executable file
View file

@ -0,0 +1,15 @@
#pragma once
#include "quantum.h"
#define LAYOUT_ortho_4x4( \
K00, K01, K02, K03, \
K10, K11, K12, K13, \
K20, K21, K22, K23, \
K30, K31, K32, K33 \
) { \
{ K00, K01, K02, K03 }, \
{ K10, K11, K12, K13 }, \
{ K20, K21, K22, K23 }, \
{ K30, K31, K32, K33 } \
}

46
keyboards/bm16s/config.h Executable file
View file

@ -0,0 +1,46 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER KPrepublic
#define PRODUCT bm16s
#define DESCRIPTION KPrepublic bm16s
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 4
/* key matrix pins */
#define MATRIX_ROW_PINS { D1, D0, D3, D2 }
#define MATRIX_COL_PINS { F7, F6, D4, D6 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* number of backlight levels */
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 3
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 16
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

30
keyboards/bm16s/info.json Normal file
View file

@ -0,0 +1,30 @@
{
"keyboard_name": "bm16s",
"url": "",
"maintainer": "qmk",
"width": 4,
"height": 4,
"layouts": {
"LAYOUT_ortho_4x4": {
"key_count": 16,
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":0, "y":1},
{"x":1, "y":1},
{"x":2, "y":1},
{"x":3, "y":1},
{"x":0, "y":2},
{"x":1, "y":2},
{"x":2, "y":2},
{"x":3, "y":2},
{"x":0, "y":3},
{"x":1, "y":3},
{"x":2, "y":3},
{"x":3, "y":3}
]
}
}
}

View file

@ -0,0 +1,16 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_4x4(
KC_KP_7, KC_KP_8, KC_KP_9, MO(1), \
KC_KP_4, KC_KP_5, KC_KP_6, KC_PMNS, \
KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, \
KC_KP_0, KC_PDOT, KC_PCMM, KC_PENT \
),
[1] = LAYOUT_ortho_4x4(
RESET, BL_STEP, _______, KC_VOLU, \
BL_TOGG, BL_DEC, BL_INC, KC_VOLD, \
RGB_TOG, RGB_MOD, RGB_HUI, KC_MUTE, \
RGB_SAI, RGB_SAD, RGB_HUD, _______ \
),
};

View file

@ -0,0 +1,20 @@
#include QMK_KEYBOARD_H
#define RGB_BRU RGB_VAI
#define RGB_BRD RGB_VAD
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_4x4(
KC_BRIU, _______, _______, KC_VOLU, \
KC_BRID, _______, _______, KC_VOLD, \
_______, _______, _______, KC_MUTE, \
KC_MPRV, KC_MPLY, KC_MNXT, MO(1) \
),
[1] = LAYOUT_ortho_4x4(
RESET, _______, _______, _______, \
RGB_SPD, RGB_BRU, RGB_SPI, _______, \
RGB_RMOD, RGB_BRD, RGB_MOD, _______, \
RGB_TOG, _______, _______, _______ \
),
};

13
keyboards/bm16s/readme.md Normal file
View file

@ -0,0 +1,13 @@
# bm16s
A 16-key macropad, with USB C and per-key RGB backlighting. This is a variant of the BM16A, but with low profile Choc switches.
Keyboard Maintainer: QMK Community
Hardware Supported: The PCBs, controllers supported
Hardware Availability: [KPrepublic](https://kprepublic.com/collections/pcb/products/bm16s-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch-leds-choc-switch); [AliExpress](https://www.aliexpress.com/item/bm16s-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch/32999247908.html); [Massdrop](https://www.massdrop.com/buy/78169)
Make example for this keyboard (after setting up your build environment):
make bm16s:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

72
keyboards/bm16s/rules.mk Executable file
View file

@ -0,0 +1,72 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = atmel-dfu
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = yes
LAYOUTS = ortho_4x4