diff --git a/keyboards/dk60/config.h b/keyboards/dk60/config.h index 6a69516cb1..bec665419b 100644 --- a/keyboards/dk60/config.h +++ b/keyboards/dk60/config.h @@ -15,36 +15,127 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H - #define CONFIG_H +#pragma once - #include "config_common.h" +#include "config_common.h" - /* USB Device descriptor parameter */ - #define VENDOR_ID 0xFEED - #define PRODUCT_ID 0x6060 - #define DEVICE_VER 0x0001 - #define MANUFACTURER DARKOU - #define PRODUCT DK60 - #define DESCRIPTION QMK keyboard firmware for DK60 support +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x56C2 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DARKOU +#define PRODUCT DK60 - /* key matrix size */ - #define MATRIX_ROWS 5 - #define MATRIX_COLS 13 +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 13 - // ROWS: Top to bottom, COLS: Left to right - #define MATRIX_ROW_PINS { B6, B4, D7, D6, D4 } - #define MATRIX_COL_PINS { B0, B3, B2, B1, D3, D5, B5, B7, C6, C7, D0, D1, D2 } - #define UNUSED_PINS +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B6, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { B0, B3, B2, B1, D3, D5, B5, B7, C6, C7, D0, D1, D2 } +#define UNUSED_PINS - /* COL2ROW or ROW2COL */ - #define DIODE_DIRECTION COL2ROW +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW - /* Set 0 if debouncing isn't needed */ - #define DEBOUNCE 5 +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ - #define LOCKING_SUPPORT_ENABLE - /* Locking resynchronize hack */ - #define LOCKING_RESYNC_ENABLE -#endif +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/dk60/dk60.c b/keyboards/dk60/dk60.c index 8b9dc547d4..6d72ff6bd8 100644 --- a/keyboards/dk60/dk60.c +++ b/keyboards/dk60/dk60.c @@ -1,3 +1,20 @@ +/* +Copyright 2017 Damien Broqua + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #include "dk60.h" extern inline void dk60_caps_led_on(void); @@ -9,12 +26,10 @@ extern inline void dk60_esc_led_off(void); extern inline void dk60_led_all_on(void); extern inline void dk60_led_all_off(void); - -void dk60_blink_all_leds(void) -{ +void dk60_blink_all_leds(void) { dk60_led_all_off(); dk60_led_all_on(); - _delay_ms(500); + wait_ms(500); dk60_led_all_off(); } @@ -26,19 +41,18 @@ void matrix_init_kb(void) { } void led_init_ports(void) { - // * Set our LED pins as output - DDRE |= (1<<6); - DDRF |= (1<<0); + setPinOutput(E6); + setPinOutput(F0); } -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1< - #include "quantum.h" - #include +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. - inline void dk60_caps_led_on(void) { PORTE |= (1<<6); } - inline void dk60_esc_led_on(void) { PORTF |= (1<<0); } +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. - inline void dk60_caps_led_off(void) { PORTE &= ~(1<<6); } - inline void dk60_esc_led_off(void) { PORTF &= ~(1<<0); } +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ - inline void dk60_led_all_on(void) - { - dk60_caps_led_on(); - dk60_esc_led_on(); - } +#pragma once - inline void dk60_led_all_off(void) - { - dk60_caps_led_off(); - dk60_esc_led_off(); - } +#include "quantum.h" - #define ___ KC_NO +inline void dk60_caps_led_on(void) { writePinHigh(E6); } +inline void dk60_esc_led_on(void) { writePinHigh(F0); } - #define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K4B, K4A, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K4C, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ - K41, K42, K45, K48, K49 \ - ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \ - { ___, K41, K42, ___, ___, K45, ___, ___, K48, K49, K4A, K4B, K4C } \ - } +inline void dk60_caps_led_off(void) { writePinLow(E6); } +inline void dk60_esc_led_off(void) { writePinLow(F0); } -#endif +inline void dk60_led_all_on(void) { + dk60_caps_led_on(); + dk60_esc_led_on(); +} + +inline void dk60_led_all_off(void) { + dk60_caps_led_off(); + dk60_esc_led_off(); +} + +#define XXX KC_NO + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K4B, K4A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K4C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K41, K42, K45, K48, K49 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \ + { XXX, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, K4C } \ +} diff --git a/keyboards/dk60/info.json b/keyboards/dk60/info.json index 0dd669fd33..2a6725bd2f 100644 --- a/keyboards/dk60/info.json +++ b/keyboards/dk60/info.json @@ -1,13 +1,77 @@ { - "keyboard_name": "DK60", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "key_count": 60, - "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":3, "y":0}, {"label":"K04", "x":4, "y":0}, {"label":"K05", "x":5, "y":0}, {"label":"K06", "x":6, "y":0}, {"label":"K07", "x":7, "y":0}, {"label":"K08", "x":8, "y":0}, {"label":"K09", "x":9, "y":0}, {"label":"K0A", "x":10, "y":0}, {"label":"K0B", "x":11, "y":0}, {"label":"K0C", "x":12, "y":0}, {"label":"K4B", "x":13, "y":0}, {"label":"K4A", "x":14, "y":0}, {"label":"K10", "x":0, "y":1, "w":1.5}, {"label":"K11", "x":1.5, "y":1}, {"label":"K12", "x":2.5, "y":1}, {"label":"K13", "x":3.5, "y":1}, {"label":"K14", "x":4.5, "y":1}, {"label":"K15", "x":5.5, "y":1}, {"label":"K16", "x":6.5, "y":1}, {"label":"K17", "x":7.5, "y":1}, {"label":"K18", "x":8.5, "y":1}, {"label":"K19", "x":9.5, "y":1}, {"label":"K1A", "x":10.5, "y":1}, {"label":"K1B", "x":11.5, "y":1}, {"label":"K1C", "x":12.5, "y":1}, {"label":"K4C", "x":13.5, "y":1, "w":1.5}, {"label":"K20", "x":0, "y":2, "w":1.75}, {"label":"K21", "x":1.75, "y":2}, {"label":"K22", "x":2.75, "y":2}, {"label":"K23", "x":3.75, "y":2}, {"label":"K24", "x":4.75, "y":2}, {"label":"K25", "x":5.75, "y":2}, {"label":"K26", "x":6.75, "y":2}, {"label":"K27", "x":7.75, "y":2}, {"label":"K28", "x":8.75, "y":2}, {"label":"K29", "x":9.75, "y":2}, {"label":"K2A", "x":10.75, "y":2}, {"label":"K2B", "x":11.75, "y":2}, {"label":"K2C", "x":12.75, "y":2, "w":2.25}, {"label":"K30", "x":0, "y":3, "w":2.25}, {"label":"K31", "x":2.25, "y":3}, {"label":"K32", "x":3.25, "y":3}, {"label":"K33", "x":4.25, "y":3}, {"label":"K34", "x":5.25, "y":3}, {"label":"K35", "x":6.25, "y":3}, {"label":"K36", "x":7.25, "y":3}, {"label":"K37", "x":8.25, "y":3}, {"label":"K38", "x":9.25, "y":3}, {"label":"K39", "x":10.25, "y":3}, {"label":"K3A", "x":11.25, "y":3}, {"label":"K3B", "x":12.25, "y":3, "w":1.75}, {"label":"K3C", "x":14, "y":3}, {"label":"K41", "x":1.5, "y":4}, {"label":"K42", "x":2.5, "y":4, "w":1.25}, {"label":"K45", "x":3.75, "y":4, "w":7}, {"label":"K48", "x":10.75, "y":4, "w":1.25}, {"label":"K49", "x":12, "y":4}] + "keyboard_name": "DK60", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 7}, + {"x": 10.75, "y": 4, "w": 1.25}, + {"x": 12, "y": 4} + ] + } } - } } diff --git a/keyboards/dk60/keymaps/default/keymap.c b/keyboards/dk60/keymaps/default/keymap.c index 43c2819831..7ebc3952b6 100644 --- a/keyboards/dk60/keymaps/default/keymap.c +++ b/keyboards/dk60/keymaps/default/keymap.c @@ -1,79 +1,80 @@ +/* +Copyright 2017 Damien Broqua + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #include QMK_KEYBOARD_H -enum planck_layers { - _QWERTY, - _FN, - _DVORAK, - _LOWER, - _RAISE, - _PLOVER, - _ADJUST +enum layer_names { + _QWERTY, + _FN }; -enum planck_keycodes { - QWERTY = SAFE_RANGE, - FN -}; - -// Fillers to make layering more clear -#define ______ KC_TRNS - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty gui/alt/space/alt/gui - * ,-----------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | - * |-----------------------------------------------------------------------------------------+ - * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | - * |-----------------------------------------------------------------------------------------+ - * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | - * |-----------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | - * |-----------------------------------------------------------------------------------------+ - * |LGUI | LAlt | Space | RAlt |RGUI | - * `-----------------------------------------------------------------' - */ - [_QWERTY] = LAYOUT( /* Basic QWERTY */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN, \ - KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI \ - ), + /* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI + ), -/* FN Layer - * ,-----------------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | - * |-----------------------------------------------------------------------------------------+ - * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | - * |-----------------------------------------------------------------------------------------+ - * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | - * |-----------------------------------------------------------------------------------------+ - * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | - * |-----------------------------------------------------------------------------------------+ - * | | | | Stop | | - * `-----------------------------------------------------------------' - */ - [_FN] = LAYOUT( /* Layer 1 */ - ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ - KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ - ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, \ - ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \ - ______, ______, ______, KC_MSTP, ______ \ - ) + /* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = LAYOUT( /* Layer 1 */ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, + _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, + _______, _______, _______, KC_MSTP, _______ + ) }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case FN: - if (record->event.pressed) { - layer_on(_FN); - dk60_esc_led_on(); - } else { - layer_off(_FN); - dk60_esc_led_off(); - } - return false; - break; - } - return true; + switch (keycode) { + case MO(_FN): + if (record->event.pressed) { + dk60_esc_led_on(); + } else { + dk60_esc_led_off(); + } + return false; + } + return true; } diff --git a/keyboards/dk60/readme.md b/keyboards/dk60/readme.md index b9d9b67113..0e557f32b1 100644 --- a/keyboards/dk60/readme.md +++ b/keyboards/dk60/readme.md @@ -1,17 +1,19 @@ -DK60 -=== +# DK60 ![DK60](https://github.com/Dbroqua/DK60/raw/master/Previews/DK60.png) -Another 60% keyboard with different HHKB layout made and sold by dbroqua. [More info on github/dbroqua](https://github.com/Dbroqua/DK60/) +Another 60% keyboard with different HHKB layout made and sold by dbroqua. -Keyboard Maintainer: [Damien Broqua aka DarKou](https://github.com/Dbroqua) -Hardware Supported: DK60 PCB revA +* Keyboard Maintainer: [Damien Broqua aka DarKou](https://github.com/Dbroqua) +* Hardware Supported: DK60 PCB revA +* Hardware Availability: https://github.com/Dbroqua/DK60/ Make example for this keyboard (after setting up your build environment): make dk60:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Flashing example for this keyboard: -Open Hardware project! + make dk60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dk60/rules.mk b/keyboards/dk60/rules.mk index b7518eee35..bd7843a9bd 100644 --- a/keyboards/dk60/rules.mk +++ b/keyboards/dk60/rules.mk @@ -2,26 +2,23 @@ MCU = atmega32u4 # Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -# CONSOLE_ENABLE = yes # Console for debug -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -SLEEP_LED_ENABLE = yes +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +KEYBOARD_LOCK_ENABLE = yes +UNICODE_ENABLE = yes