Move RGB_MATRIX_HUE/SAT/VAL/SPD_STEP to data driven (#21354)

keyboards/adm42/info.json

@@ -13,7 +13,8 @@
         "pin": "B7"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 24
     },
     "matrix_pins": {
         "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"],

keyboards/adm42/rev4/config.h

@@ -27,10 +27,6 @@
 #define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 20
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#define RGB_MATRIX_SAT_STEP 24
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_VAL_STEP 16
-#define RGB_MATRIX_SPD_STEP 16
 
 #define ENABLE_RGB_MATRIX_BREATHING
 #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT

keyboards/aleblazer/zodiark/config.h

@@ -40,8 +40,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
 #endif

keyboards/aleblazer/zodiark/info.json

@@ -17,7 +17,10 @@
         "split_count": [34, 34]
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "matrix_pins": {
         "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],

keyboards/basekeys/trifecta/config.h

@@ -52,10 +52,6 @@
 #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 
 /* Disable the animations you don't want/need.  You will need to disable a good number of these    *
  * because they take up a lot of space.  Disable until you can successfully compile your firmware. */

keyboards/basekeys/trifecta/info.json

@@ -30,6 +30,11 @@
         "led_count": 80,
         "max_brightness": 128
     },
+    "rgb_matrix": {
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
    "layouts": {

keyboards/blockboy/ac980mini/config.h

@@ -15,10 +15,6 @@
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 
 /* Enable the animations you want/need.  You may need to enable only a small number of these because       *
  * they take up a lot of space.  Enable and confirm that you can still successfully compile your firmware. */

keyboards/blockboy/ac980mini/info.json

@@ -19,7 +19,10 @@
         "pin": "B7"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "layouts": {
         "LAYOUT": {

keyboards/checkerboards/quark_lp/config.h

@@ -27,10 +27,6 @@
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 125 // limits maximum brightness of LEDs to 125 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
 
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:

keyboards/checkerboards/quark_lp/info.json

@@ -12,7 +12,10 @@
         "pin": "C2"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "matrix_pins": {
         "cols": ["B6", "B5", "B4", "B3", "B0", "D6", "D5", "D4", "D3", "D2", "D1", "D0"],

keyboards/elephant42/config.h

@@ -36,10 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGB_MATRIX_LED_COUNT 54
 #    define RGB_MATRIX_SPLIT { 27, 27 }
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
-#    define RGB_MATRIX_HUE_STEP RGBLIGHT_HUE_STEP
-#    define RGB_MATRIX_SAT_STEP RGBLIGHT_SAT_STEP
-#    define RGB_MATRIX_VAL_STEP RGBLIGHT_VAL_STEP
-#    define RGB_MATRIX_SPD_STEP 8
 #endif
 
 #ifndef OLED_FONT_H

keyboards/elephant42/info.json

@@ -9,7 +9,10 @@
         "device_version": "0.0.1"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 8
     },
     "rgblight": {
         "led_count": 54,

keyboards/helix/rev3_4rows/config.h

@@ -55,10 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 #endif
 
 #ifdef RGBLIGHT_ENABLE

keyboards/helix/rev3_4rows/info.json

@@ -9,7 +9,10 @@
     "device_version": "0.0.1"
   },
   "rgb_matrix": {
-    "driver": "WS2812"
+    "driver": "WS2812",
+    "sat_steps": 8,
+    "val_steps": 8,
+    "speed_steps": 10
   },
   "encoder": {
     "rotary": [

keyboards/helix/rev3_5rows/config.h

@@ -55,10 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 #endif
 
 #ifdef RGBLIGHT_ENABLE

keyboards/helix/rev3_5rows/info.json

@@ -9,7 +9,10 @@
     "device_version": "0.0.1"
   },
   "rgb_matrix": {
-    "driver": "WS2812"
+    "driver": "WS2812",
+    "sat_steps": 8,
+    "val_steps": 8,
+    "speed_steps": 10
   },
   "encoder": {
     "rotary": [

keyboards/kapl/rev1/config.h

@@ -23,10 +23,6 @@
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 16
-#define RGB_MATRIX_VAL_STEP 16
-#define RGB_MATRIX_SPD_STEP 10
 // EFFECTS
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/kapl/rev1/info.json

@@ -12,7 +12,8 @@
     "pin": "D4"
   },
   "rgb_matrix": {
-    "driver": "WS2812"
+    "driver": "WS2812",
+    "speed_steps": 10
   },
   "rgblight": {
     "led_count": 88,

keyboards/kbdfans/baguette66/rgb/config.h

@@ -61,7 +61,3 @@
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10

keyboards/kbdfans/baguette66/rgb/info.json

@@ -14,7 +14,10 @@
         "pin": "E6"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "matrix_pins": {
         "cols": ["C6", "C7", "F7", "F6", "B0", "B1", "B2", "B3", "D0", "D1", "D2", "D3", "D5", "D4", "D6"],

keyboards/kbdfans/kbd67/mkiirgb/v4/config.h

@@ -36,10 +36,6 @@
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
 // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

keyboards/kbdfans/kbd67/mkiirgb/v4/info.json

@@ -11,7 +11,10 @@
         "pin": "C7"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "matrix_pins": {
         "cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"],

keyboards/kbdfans/kbd67/mkiirgb_iso/config.h

@@ -26,10 +26,6 @@
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
 // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

keyboards/kbdfans/kbd67/mkiirgb_iso/info.json

@@ -12,7 +12,10 @@
         "pin": "C7"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "matrix_pins": {
         "cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"],

keyboards/kbdfans/kbd75rgb/config.h

@@ -61,7 +61,3 @@
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10

keyboards/kbdfans/kbd75rgb/info.json

@@ -15,7 +15,10 @@
         "pin": "C7"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "matrix_pins": {
         "cols": ["F7", "F6", "F5", "F4", "E6", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"],

keyboards/marksard/rhymestone/rev1/config.h

@@ -40,10 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   // #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
   // #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
   #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-  #define RGB_MATRIX_HUE_STEP 8
-  #define RGB_MATRIX_SAT_STEP 8
-  #define RGB_MATRIX_VAL_STEP 8
-  #define RGB_MATRIX_SPD_STEP 10
 
 //   #undef ENABLE_RGB_MATRIX_ALPHAS_MODS
 //   #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/marksard/rhymestone/rev1/info.json

@@ -9,7 +9,10 @@
         "device_version": "0.2.0"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "matrix_pins": {
         "cols": ["D4", "C6", "D7", "E6", "B4"],

keyboards/nack/config.h

@@ -23,9 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #define RGB_MATRIX_LED_COUNT 52
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 // Max brightness of LEDs
     #define RGB_MATRIX_DEFAULT_VAL 64
-    #define RGB_MATRIX_HUE_STEP 10
-    #define RGB_MATRIX_SAT_STEP 10
-    #define RGB_MATRIX_VAL_STEP 10
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
 // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

keyboards/nack/info.json

@@ -13,7 +13,10 @@
         "driver": "spi"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "hue_steps": 10,
+        "sat_steps": 10,
+        "val_steps": 10
     },
     "matrix_pins": {
         "cols": ["A6", "A7", "A8", "A9", "A10", "B0", "B1", "B2", "B6", "B7", "C13", "C14", "C15"],

keyboards/quarkeys/z40/config.h

@@ -20,9 +20,6 @@
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_WHEN_USB_SUSPENDED              // Turn off effects when suspended
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 130           // Limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
 
 // RGB_MATRIX effects
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS 	            //Enables RGB_MATRIX_ALPHAS_MODS

keyboards/quarkeys/z40/info.json

@@ -9,7 +9,10 @@
         "device_version": "0.0.1"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "rgblight": {
         "led_count": 47,

keyboards/silverbullet44/config.h

@@ -23,11 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #define RGB_MATRIX_LED_COUNT 52
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
 
-    #define RGB_MATRIX_HUE_STEP 8
-    #define RGB_MATRIX_SAT_STEP 8
-    #define RGB_MATRIX_VAL_STEP 8
-    #define RGB_MATRIX_SPD_STEP 8
-
     #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 
     #define RGB_MATRIX_KEYPRESSES  // reacts to keypresses

keyboards/silverbullet44/info.json

@@ -12,7 +12,10 @@
         "pin": "D3"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 8
     },
     "rgblight": {
         "led_count": 52,

keyboards/tominabox1/le_chiffre/config.h

@@ -42,8 +42,4 @@
 #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
 #endif

keyboards/tominabox1/le_chiffre/he/info.json

@@ -19,7 +19,10 @@
         ]
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",

keyboards/tominabox1/le_chiffre/rev1/info.json

@@ -19,7 +19,10 @@
         ]
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",

keyboards/tominabox1/le_chiffre/rev2/info.json

@@ -19,7 +19,10 @@
         ]
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",

keyboards/ungodly/launch_pad/config.h

@@ -29,10 +29,6 @@
 // #    define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 // #    define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_PINWHEEL  // default mode
 
 // RGB Matrix Animation modes. Explicitly enabled

keyboards/ungodly/launch_pad/info.json

@@ -9,7 +9,10 @@
     "device_version": "99.9.9"
   },
   "rgb_matrix": {
-    "driver": "WS2812"
+    "driver": "WS2812",
+    "sat_steps": 8,
+    "val_steps": 8,
+    "speed_steps": 10
   },
   "matrix_pins": {
     "cols": ["B0", "B1", "B2", "B3"],

keyboards/yushakobo/quick17/config.h

@@ -30,10 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //        #define RGB_MATRIX_DEFAULT_HUE 128
 //        #define RGB_MATRIX_DEFAULT_SAT 255
         #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 8
-#    define RGB_MATRIX_VAL_STEP 8
-#    define RGB_MATRIX_SPD_STEP 10
 #endif
 
 

keyboards/yushakobo/quick17/info.json

@@ -9,7 +9,10 @@
         "device_version": "0.0.1"
     },
     "rgb_matrix": {
-        "driver": "WS2812"
+        "driver": "WS2812",
+        "sat_steps": 8,
+        "val_steps": 8,
+        "speed_steps": 10
     },
     "rgblight": {
         "led_count": 18,