darkkirb/qmk_firmware
1
0
Fork 0
forked from mirrors/qmk_firmware
Code Issues Pull requests Projects Releases Packages Wiki Activity

handwired/dactyl - Refactor use of legacy i2c implementation (#14344)

Browse source
This commit is contained in:
Joel Challis 2021-09-08 02:23:11 +01:00 committed by GitHub
parent 04c0704b28
commit 60c5bd7b5e
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 52 additions and 442 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
keyboards/handwired/dactyl/dactyl.c
View file

@ -1,5 +1,4 @@
#include "dactyl.h" #include "dactyl.h"
#include "i2cmaster.h"
#ifdef SWAP_HANDS_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))

5
keyboards/handwired/dactyl/dactyl.h
View file

@ -4,12 +4,11 @@
#include "quantum.h" #include "quantum.h"
#include <stdint.h> #include <stdint.h>
#include <stdbool.h> #include <stdbool.h>
#include "i2cmaster.h" #include "i2c_master.h"
#include <util/delay.h> #include <util/delay.h>
#define I2C_ADDR 0b0100000 #define I2C_ADDR 0b0100000
#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) #define I2C_TIMEOUT 100
#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ )
#define IODIRA 0x00 // i/o direction register #define IODIRA 0x00 // i/o direction register
#define IODIRB 0x01 #define IODIRB 0x01
#define GPPUA 0x0C // GPIO pull-up resistor register #define GPPUA 0x0C // GPIO pull-up resistor register

178
keyboards/handwired/dactyl/i2cmaster.h
View file

@ -1,178 +0,0 @@
#ifndef _I2CMASTER_H
#define _I2CMASTER_H 1
/*************************************************************************
* Title: C include file for the I2C master interface
* (i2cmaster.S or twimaster.c)
* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $
* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
* Target: any AVR device
* Usage: see Doxygen manual
**************************************************************************/
#ifdef DOXYGEN
/**
@defgroup pfleury_ic2master I2C Master library
@code #include <i2cmaster.h> @endcode
@brief I2C (TWI) Master Software Library
Basic routines for communicating with I2C slave devices. This single master
implementation is limited to one bus master on the I2C bus.
This I2c library is implemented as a compact assembler software implementation of the I2C protocol
which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c).
Since the API for these two implementations is exactly the same, an application can be linked either against the
software I2C implementation or the hardware I2C implementation.
Use 4.7k pull-up resistor on the SDA and SCL pin.
Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module
i2cmaster.S to your target when using the software I2C implementation !
Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion.
@note
The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted
to GNU assembler and AVR-GCC C call interface.
Replaced the incorrect quarter period delays found in AVR300 with
half period delays.
@author Peter Fleury pfleury@gmx.ch http://jump.to/fleury
@par API Usage Example
The following code shows typical usage of this library, see example test_i2cmaster.c
@code
#include <i2cmaster.h>
#define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet
int main(void)
{
unsigned char ret;
i2c_init(); // initialize I2C library
// write 0x75 to EEPROM address 5 (Byte Write)
i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode
i2c_write(0x05); // write address = 5
i2c_write(0x75); // write value 0x75 to EEPROM
i2c_stop(); // set stop conditon = release bus
// read previously written value back from EEPROM address 5
i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode
i2c_write(0x05); // write address = 5
i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode
ret = i2c_readNak(); // read one byte from EEPROM
i2c_stop();
for(;;);
}
@endcode
*/
#endif /* DOXYGEN */
/**@{*/
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
#endif
#include <avr/io.h>
/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */
#define I2C_READ 1
/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */
#define I2C_WRITE 0
/**
@brief initialize the I2C master interace. Need to be called only once
@param void
@return none
*/
extern void i2c_init(void);
/**
@brief Terminates the data transfer and releases the I2C bus
@param void
@return none
*/
extern void i2c_stop(void);
/**
@brief Issues a start condition and sends address and transfer direction
@param addr address and transfer direction of I2C device
@retval 0 device accessible
@retval 1 failed to access device
*/
extern unsigned char i2c_start(unsigned char addr);
/**
@brief Issues a repeated start condition and sends address and transfer direction
@param addr address and transfer direction of I2C device
@retval 0 device accessible
@retval 1 failed to access device
*/
extern unsigned char i2c_rep_start(unsigned char addr);
/**
@brief Issues a start condition and sends address and transfer direction
If device is busy, use ack polling to wait until device ready
@param addr address and transfer direction of I2C device
@return none
*/
extern void i2c_start_wait(unsigned char addr);
/**
@brief Send one byte to I2C device
@param data byte to be transfered
@retval 0 write successful
@retval 1 write failed
*/
extern unsigned char i2c_write(unsigned char data);
/**
@brief read one byte from the I2C device, request more data from device
@return byte read from I2C device
*/
extern unsigned char i2c_readAck(void);
/**
@brief read one byte from the I2C device, read is followed by a stop condition
@return byte read from I2C device
*/
extern unsigned char i2c_readNak(void);
/**
@brief read one byte from the I2C device
Implemented as a macro, which calls either i2c_readAck or i2c_readNak
@param ack 1 send ack, request more data from device<br>
0 send nak, read is followed by a stop condition
@return byte read from I2C device
*/
extern unsigned char i2c_read(unsigned char ack);
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
/**@}*/
#endif

99
keyboards/handwired/dactyl/matrix.c
View file

@ -25,7 +25,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "util.h" #include "util.h"
#include "matrix.h" #include "matrix.h"
#include "dactyl.h" #include "dactyl.h"
#include "i2cmaster.h" #include "i2c_master.h"
#include "timer.h" #include "timer.h"
@ -147,9 +147,6 @@ void init_expander(void) {
#endif #endif
} }
expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out;
expander_status = i2c_write(IODIRA); if (expander_status) goto out;
/* /*
Pin direction and pull-up depends on both the diode direction Pin direction and pull-up depends on both the diode direction
and on whether the column register is GPIOA or GPIOB and on whether the column register is GPIOA or GPIOB
@ -164,50 +161,65 @@ void init_expander(void) {
#if (EXPANDER_COL_REGISTER == GPIOA) #if (EXPANDER_COL_REGISTER == GPIOA)
# if (DIODE_DIRECTION == COL2ROW) # if (DIODE_DIRECTION == COL2ROW)
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; uint8_t direction[2] = {
expander_status = i2c_write(0); if (expander_status) goto out; expander_input_pin_mask,
0,
};
# elif (DIODE_DIRECTION == ROW2COL) # elif (DIODE_DIRECTION == ROW2COL)
expander_status = i2c_write(0); if (expander_status) goto out; uint8_t direction[2] = {
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; 0,
expander_input_pin_mask,
};
# endif # endif
#elif (EXPANDER_COL_REGISTER == GPIOB) #elif (EXPANDER_COL_REGISTER == GPIOB)
# if (DIODE_DIRECTION == COL2ROW) # if (DIODE_DIRECTION == COL2ROW)
expander_status = i2c_write(0); if (expander_status) goto out; uint8_t direction[2] = {
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; 0,
expander_input_pin_mask,
};
# elif (DIODE_DIRECTION == ROW2COL) # elif (DIODE_DIRECTION == ROW2COL)
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; uint8_t direction[2] = {
expander_status = i2c_write(0); if (expander_status) goto out; expander_input_pin_mask,
0,
};
# endif # endif
#endif #endif
i2c_stop();
// set pull-up // set pull-up
// - unused : off : 0 // - unused : off : 0
// - input : on : 1 // - input : on : 1
// - driving : off : 0 // - driving : off : 0
expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out;
expander_status = i2c_write(GPPUA); if (expander_status) goto out;
#if (EXPANDER_COL_REGISTER == GPIOA) #if (EXPANDER_COL_REGISTER == GPIOA)
# if (DIODE_DIRECTION == COL2ROW) # if (DIODE_DIRECTION == COL2ROW)
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; uint8_t pullup[2] = {
expander_status = i2c_write(0); if (expander_status) goto out; expander_input_pin_mask,
0,
};
# elif (DIODE_DIRECTION == ROW2COL) # elif (DIODE_DIRECTION == ROW2COL)
expander_status = i2c_write(0); if (expander_status) goto out; uint8_t pullup[2] = {
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; 0,
expander_input_pin_mask,
};
# endif # endif
#elif (EXPANDER_COL_REGISTER == GPIOB) #elif (EXPANDER_COL_REGISTER == GPIOB)
# if (DIODE_DIRECTION == COL2ROW) # if (DIODE_DIRECTION == COL2ROW)
expander_status = i2c_write(0); if (expander_status) goto out; uint8_t pullup[2] = {
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; 0,
expander_input_pin_mask,
};
# elif (DIODE_DIRECTION == ROW2COL) # elif (DIODE_DIRECTION == ROW2COL)
expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; uint8_t pullup[2] = {
expander_status = i2c_write(0); if (expander_status) goto out; expander_input_pin_mask,
0,
};
# endif # endif
#endif #endif
out:
i2c_stop(); expander_status = i2c_writeReg(I2C_ADDR, IODIRA, direction, 2, I2C_TIMEOUT);
if (expander_status) return;
expander_status = i2c_writeReg(I2C_ADDR, GPPUA, pullup, 2, I2C_TIMEOUT);
} }
uint8_t matrix_scan(void) uint8_t matrix_scan(void)
@ -337,14 +349,11 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
// Read columns from expander, unless it's in an error state // Read columns from expander, unless it's in an error state
if (! expander_status) { if (! expander_status) {
expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; uint8_t state = 0;
expander_status = i2c_write(EXPANDER_COL_REGISTER); if (expander_status) goto out; expander_status = i2c_readReg(I2C_ADDR, EXPANDER_COL_REGISTER, &state, 1, I2C_TIMEOUT);
expander_status = i2c_start(I2C_ADDR_READ); if (expander_status) goto out; if (! expander_status) {
current_matrix[current_row] |= (~state) & expander_input_pin_mask;
current_matrix[current_row] |= (~i2c_readNak()) & expander_input_pin_mask; }
out:
i2c_stop();
} }
// Read columns from onboard pins // Read columns from onboard pins
@ -366,11 +375,8 @@ static void select_row(uint8_t row) {
if (! expander_status) { if (! expander_status) {
// set active row low : 0 // set active row low : 0
// set other rows hi-Z : 1 // set other rows hi-Z : 1
expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; uint8_t port = 0xFF & ~(1<<row);
expander_status = i2c_write(EXPANDER_ROW_REGISTER); if (expander_status) goto out; expander_status = i2c_writeReg(I2C_ADDR, EXPANDER_ROW_REGISTER, &port, 1, I2C_TIMEOUT);
expander_status = i2c_write(0xFF & ~(1<<row)); if (expander_status) goto out;
out:
i2c_stop();
} }
// select on teensy // select on teensy
@ -426,13 +432,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
return false; return false;
} }
expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; expander_status = i2c_readReg(I2C_ADDR, EXPANDER_ROW_REGISTER, &column_state, 1, I2C_TIMEOUT);
expander_status = i2c_write(EXPANDER_ROW_REGISTER); if (expander_status) goto out;
expander_status = i2c_start(I2C_ADDR_READ); if (expander_status) goto out;
column_state = i2c_readNak();
out:
i2c_stop();
column_state = ~column_state; column_state = ~column_state;
} else { } else {
@ -476,11 +476,8 @@ static void select_col(uint8_t col)
} else { } else {
// set active col low : 0 // set active col low : 0
// set other cols hi-Z : 1 // set other cols hi-Z : 1
expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; uint8_t port = 0xFF & ~(1<<col);
expander_status = i2c_write(EXPANDER_COL_REGISTER); if (expander_status) goto out; expander_status = i2c_writeReg(I2C_ADDR, EXPANDER_COL_REGISTER, &port, 1, I2C_TIMEOUT);
expander_status = i2c_write(0xFF & ~(1<<col)); if (expander_status) goto out;
out:
i2c_stop();
} }
} else { } else {
// select on teensy // select on teensy

4
keyboards/handwired/dactyl/rules.mk
View file

@ -28,5 +28,5 @@ SLEEP_LED_ENABLE = no
RGBLIGHT_ENABLE = no RGBLIGHT_ENABLE = no
# project specific files # project specific files
SRC = twimaster.c \ QUANTUM_LIB_SRC += i2c_master.c
matrix.c SRC += matrix.c

207
keyboards/handwired/dactyl/twimaster.c
View file

@ -1,207 +0,0 @@
/*************************************************************************
* Title: I2C master library using hardware TWI interface
* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $
* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
* Target: any AVR device with hardware TWI
* Usage: API compatible with I2C Software Library i2cmaster.h
**************************************************************************/
#include <inttypes.h>
#include <compat/twi.h>
#include "i2cmaster.h"
/* define CPU frequency in Hz here if not defined in Makefile */
#ifndef F_CPU
#define F_CPU 16000000UL
#endif
/* I2C clock in Hz */
#define SCL_CLOCK 400000L
/*************************************************************************
Initialization of the I2C bus interface. Need to be called only once
*************************************************************************/
void i2c_init(void)
{
/* initialize TWI clock
* minimal values in Bit Rate Register (TWBR) and minimal Prescaler
* bits in the TWI Status Register should give us maximal possible
* I2C bus speed - about 444 kHz
*
* for more details, see 20.5.2 in ATmega16/32 secification
*/
TWSR = 0; /* no prescaler */
TWBR = 10; /* must be >= 10 for stable operation */
}/* i2c_init */
/*************************************************************************
Issues a start condition and sends address and transfer direction.
return 0 = device accessible, 1= failed to access device
*************************************************************************/
unsigned char i2c_start(unsigned char address)
{
uint8_t twst;
// send START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_START) && (twst != TW_REP_START)) return 1;
// send device address
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
// wail until transmission completed and ACK/NACK has been received
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
return 0;
}/* i2c_start */
/*************************************************************************
Issues a start condition and sends address and transfer direction.
If device is busy, use ack polling to wait until device is ready
Input: address and transfer direction of I2C device
*************************************************************************/
void i2c_start_wait(unsigned char address)
{
uint8_t twst;
while ( 1 )
{
// send START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_START) && (twst != TW_REP_START)) continue;
// send device address
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
// wail until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst == TW_MT_SLA_NACK )||(twst ==TW_MR_DATA_NACK) )
{
/* device busy, send stop condition to terminate write operation */
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
// wait until stop condition is executed and bus released
while(TWCR & (1<<TWSTO));
continue;
}
//if( twst != TW_MT_SLA_ACK) return 1;
break;
}
}/* i2c_start_wait */
/*************************************************************************
Issues a repeated start condition and sends address and transfer direction
Input: address and transfer direction of I2C device
Return: 0 device accessible
1 failed to access device
*************************************************************************/
unsigned char i2c_rep_start(unsigned char address)
{
return i2c_start( address );
}/* i2c_rep_start */
/*************************************************************************
Terminates the data transfer and releases the I2C bus
*************************************************************************/
void i2c_stop(void)
{
/* send stop condition */
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
// wait until stop condition is executed and bus released
while(TWCR & (1<<TWSTO));
}/* i2c_stop */
/*************************************************************************
Send one byte to I2C device
Input: byte to be transfered
Return: 0 write successful
1 write failed
*************************************************************************/
unsigned char i2c_write( unsigned char data )
{
uint8_t twst;
// send data to the previously addressed device
TWDR = data;
TWCR = (1<<TWINT) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits
twst = TW_STATUS & 0xF8;
if( twst != TW_MT_DATA_ACK) return 1;
return 0;
}/* i2c_write */
/*************************************************************************
Read one byte from the I2C device, request more data from device
Return: byte read from I2C device
*************************************************************************/
unsigned char i2c_readAck(void)
{
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
while(!(TWCR & (1<<TWINT)));
return TWDR;
}/* i2c_readAck */
/*************************************************************************
Read one byte from the I2C device, read is followed by a stop condition
Return: byte read from I2C device
*************************************************************************/
unsigned char i2c_readNak(void)
{
TWCR = (1<<TWINT) | (1<<TWEN);
while(!(TWCR & (1<<TWINT)));
return TWDR;
}/* i2c_readNak */