diff --git a/ChangeLog/20220226.md b/ChangeLog/20220226.md
new file mode 100644
index 0000000000..a469612fe8
--- /dev/null
+++ b/ChangeLog/20220226.md
@@ -0,0 +1,489 @@
+# QMK Breaking Changes - 2022 February 26 Changelog
+
+## Notable Features :id=notable-features
+
+### Default USB Polling rate now 1kHz ([#15352](https://github.com/qmk/qmk_firmware/pull/15352))
+
+The default USB Polling rate has been aligned across supported platforms to now be 1ms/1kHz.
+
+Something something *Lets go gamers!*
+
+### Split support for pointing devices ([#15304](https://github.com/qmk/qmk_firmware/pull/15304))
+
+Pointing devices can now be shared across a split keyboard with support for a single pointing device or a pointing device on each side.
+
+See the [Pointing Device](feature_pointing_device.md) documentation for further configuration options.
+
+## Changes Requiring User Action :id=changes-requiring-user-action
+
+### Legacy macro and action_function system removed ([#16025](https://github.com/qmk/qmk_firmware/pull/16025))
+
+The long time deprecated `MACRO()` and `action_get_macro` methods have been removed. Where possible, existing usages have been migrated over to core [Macros](feature_macros.md).
+
+### Create a build error if no bootloader is specified ([#16181](https://github.com/qmk/qmk_firmware/pull/16181))
+
+Bootloader configuration is no longer assumed. Keyboards must now set either:
+
+* `BOOTLOADER` within `rules.mk`
+* `bootloader` within `info.json`
+
+### Rename `AdafruitBLE` to `BluefruitLE` ([#16127](https://github.com/qmk/qmk_firmware/pull/16127))
+
+In preparation of future bluetooth work, the `AdafruitBLE` integration has been renamed to allow potential for any other Adafruit BLE products.
+
+### Updated Keyboard Codebases :id=updated-keyboard-codebases
+
+The following keyboards have had their source moved within QMK:
+
+| Old Keyboard Name | New Keyboard Name |
+|----------------------------|------------------------------------|
+| 6ball | maple_computing/6ball |
+| 7skb | salicylic_acid3/7skb |
+| 7splus | salicylic_acid3/7splus |
+| acr60 | mechkeys/acr60 |
+| adalyn | tominabox1/adalyn |
+| ajisai74 | salicylic_acid3/ajisai74 |
+| aleth42 | 25keys/aleth42 |
+| alicia_cook | ibnuda/alicia_cook |
+| allison_numpad | prototypist/allison_numpad |
+| allison | prototypist/allison |
+| alu84 | mechkeys/alu84 |
+| angel17 | kakunpc/angel17 |
+| angel64/alpha | kakunpc/angel64/alpha |
+| angel64/rev1 | kakunpc/angel64/rev1 |
+| arch_36 | obosob/arch_36 |
+| bakeneko60 | kkatano/bakeneko60 |
+| bakeneko65/rev2 | kkatano/bakeneko65/rev2 |
+| bakeneko65/rev3 | kkatano/bakeneko65/rev3 |
+| bakeneko80 | kkatano/bakeneko80 |
+| barleycorn | yiancardesigns/barleycorn |
+| bat43/rev1 | dailycraft/bat43/rev1 |
+| bat43/rev2 | dailycraft/bat43/rev2 |
+| bigseries/1key | woodkeys/bigseries/1key |
+| bigseries/2key | woodkeys/bigseries/2key |
+| bigseries/3key | woodkeys/bigseries/3key |
+| bigseries/4key | woodkeys/bigseries/4key |
+| bkf | drhigsby/bkf |
+| business_card/alpha | kakunpc/business_card/alpha |
+| business_card/beta | kakunpc/business_card/beta |
+| butterstick | gboards/butterstick |
+| c39 | maple_computing/c39 |
+| cassette42 | 25keys/cassette42 |
+| chidori | kagizaraya/chidori |
+| chili | ydkb/chili |
+| chimera_ergo | glenpickle/chimera_ergo |
+| chimera_ls | glenpickle/chimera_ls |
+| chimera_ortho | glenpickle/chimera_ortho |
+| chimera_ortho_plus | glenpickle/chimera_ortho_plus |
+| choco60 | recompile_keys/choco60 |
+| choc_taro | kakunpc/choc_taro |
+| christmas_tree | maple_computing/christmas_tree |
+| claw44/rev1 | dailycraft/claw44/rev1 |
+| cocoa40 | recompile_keys/cocoa40 |
+| comet46 | satt/comet46 |
+| cu24 | capsunlocked/cu24 |
+| cu75 | capsunlocked/cu75 |
+| cu80 | capsunlocked/cu80/v1 |
+| delilah | rainkeebs/delilah |
+| diverge3 | unikeyboard/diverge3 |
+| divergetm2 | unikeyboard/divergetm2 |
+| dozen0 | yynmt/dozen0 |
+| dubba175 | drhigsby/dubba175 |
+| eggman | qpockets/eggman |
+| ergo42 | biacco42/ergo42 |
+| ergoarrows | salicylic_acid3/ergoarrows |
+| ergodash/mini | omkbd/ergodash/mini |
+| ergodash/rev1 | omkbd/ergodash/rev1 |
+| ergodox_infinity | input_club/ergodox_infinity |
+| ergotaco | gboards/ergotaco |
+| espectro | mechkeys/espectro |
+| felix | unikeyboard/felix |
+| four_banger | bpiphany/four_banger |
+| freyr | hnahkb/freyr |
+| geminate60 | weirdo/geminate60 |
+| georgi | gboards/georgi |
+| gergo | gboards/gergo |
+| getta25 | salicylic_acid3/getta25 |
+| gingham | yiancardesigns/gingham |
+| gurindam | ibnuda/gurindam |
+| halberd | kagizaraya/halberd |
+| hecomi/alpha | takashiski/hecomi/alpha |
+| hid_liber | bpiphany/hid_liber |
+| id67/default_rgb | idobao/id67/default_rgb |
+| id67/rgb | idobao/id67/rgb |
+| id80 | idobao/id80/v1 |
+| id87 | idobao/id87/v1 |
+| idobo | idobao/id75/v1 |
+| infinity60 | input_club/infinity60 |
+| ivy/rev1 | maple_computing/ivy/rev1 |
+| jisplit89 | salicylic_acid3/jisplit89 |
+| jnao | maple_computing/jnao |
+| just60 | ydkb/just60 |
+| kagamidget | yynmt/kagamidget |
+| kelowna/rgb64 | weirdo/kelowna/rgb64 |
+| kprepublic/bm65hsrgb_iso | kprepublic/bm65hsrgb_iso/rev1 |
+| kprepublic/bm68hsrgb | kprepublic/bm68hsrgb/rev1 |
+| k_type | input_club/k_type |
+| latin17rgb | latincompass/latin17rgb |
+| latin47ble | latincompass/latin47ble |
+| latin60rgb | latincompass/latin60rgb |
+| latin64ble | latincompass/latin64ble |
+| latin6rgb | latincompass/latin6rgb |
+| latinpadble | latincompass/latinpadble |
+| latinpad | latincompass/latinpad |
+| launchpad/rev1 | maple_computing/launchpad/rev1 |
+| lck75 | lyso1/lck75 |
+| le_chiffre | tominabox1/le_chiffre |
+| lefishe | lyso1/lefishe |
+| lets_split_eh/eh | maple_computing/lets_split_eh/eh |
+| ls_60 | weirdo/ls_60 |
+| m3n3van | matthewdias/m3n3van |
+| mechmini/v1 | mechkeys/mechmini/v1 |
+| mechmini/v2 | mechkeys/mechmini/v2 |
+| meira | woodkeys/meira |
+| meishi2 | biacco42/meishi2 |
+| meishi | biacco42/meishi |
+| minidox/rev1 | maple_computing/minidox/rev1 |
+| minim | matthewdias/minim |
+| mio | recompile_keys/mio |
+| model_v | matthewdias/model_v |
+| montex | idobao/montex/v1 |
+| nafuda | salicylic_acid3/nafuda |
+| naiping/np64 | weirdo/naiping/np64 |
+| naiping/nphhkb | weirdo/naiping/nphhkb |
+| naiping/npminila | weirdo/naiping/npminila |
+| naked48 | salicylic_acid3/naked48 |
+| naked60 | salicylic_acid3/naked60 |
+| naked64 | salicylic_acid3/naked64 |
+| namecard2x4 | takashiski/namecard2x4 |
+| nebula12 | spaceholdings/nebula12 |
+| nebula68b | spaceholdings/nebula68b |
+| nebula68 | spaceholdings/nebula68 |
+| niu_mini | kbdfans/niu_mini |
+| nk1 | novelkeys/nk1 |
+| nk65 | novelkeys/nk65 |
+| nk87 | novelkeys/nk87 |
+| nknl7en | salicylic_acid3/nknl7en |
+| nknl7jp | salicylic_acid3/nknl7jp |
+| nomu30 | recompile_keys/nomu30 |
+| novelpad | novelkeys/novelpad |
+| ogurec | drhigsby/ogurec |
+| otaku_split/rev0 | takashiski/otaku_split/rev0 |
+| otaku_split/rev1 | takashiski/otaku_split/rev1 |
+| owl8 | dailycraft/owl8 |
+| packrat | drhigsby/packrat |
+| pistachio_mp | rate/pistachio_mp |
+| pistachio_pro | rate/pistachio_pro |
+| pistachio | rate/pistachio |
+| plexus75 | checkerboards/plexus75 |
+| pursuit40 | checkerboards/pursuit40 |
+| qaz | tominabox1/qaz |
+| quark | checkerboards/quark |
+| rabbit_capture_plan | kakunpc/rabbit_capture_plan |
+| rainkeeb | rainkeebs/rainkeeb |
+| reviung33 | reviung/reviung33 |
+| reviung34 | reviung/reviung34 |
+| reviung39 | reviung/reviung39 |
+| reviung41 | reviung/reviung41 |
+| reviung53 | reviung/reviung53 |
+| reviung5 | reviung/reviung5 |
+| reviung61 | reviung/reviung61 |
+| runner3680/3x6 | omkbd/runner3680/3x6 |
+| runner3680/3x7 | omkbd/runner3680/3x7 |
+| runner3680/3x8 | omkbd/runner3680/3x8 |
+| runner3680/4x6 | omkbd/runner3680/4x6 |
+| runner3680/4x7 | omkbd/runner3680/4x7 |
+| runner3680/4x8 | omkbd/runner3680/4x8 |
+| runner3680/5x6_5x8 | omkbd/runner3680/5x6_5x8 |
+| runner3680/5x6 | omkbd/runner3680/5x6 |
+| runner3680/5x7 | omkbd/runner3680/5x7 |
+| runner3680/5x8 | omkbd/runner3680/5x8 |
+| scarletbandana | woodkeys/scarletbandana |
+| scythe | kagizaraya/scythe |
+| seigaiha | yiancardesigns/seigaiha |
+| setta21 | salicylic_acid3/setta21 |
+| space_space/rev1 | qpockets/space_space/rev1 |
+| space_space/rev2 | qpockets/space_space/rev2 |
+| spiderisland/winry25tc | winry/winry25tc |
+| splitreus62 | nacly/splitreus62 |
+| squiggle/rev1 | ibnuda/squiggle/rev1 |
+| standaside | edi/standaside |
+| steal_this_keyboard | obosob/steal_this_keyboard |
+| stella | hnahkb/stella |
+| suihankey/alpha | kakunpc/suihankey/alpha |
+| suihankey/rev1 | kakunpc/suihankey/rev1 |
+| suihankey/split | kakunpc/suihankey/split |
+| thedogkeyboard | kakunpc/thedogkeyboard |
+| the_ruler | maple_computing/the_ruler |
+| tiger910 | weirdo/tiger910 |
+| treadstone32 | marksard/treadstone32 |
+| treadstone48/rev1 | marksard/treadstone48/rev1 |
+| treadstone48/rev2 | marksard/treadstone48/rev2 |
+| txuu | matthewdias/txuu |
+| ua62 | nacly/ua62 |
+| underscore33/rev1 | tominabox1/underscore33/rev1 |
+| underscore33/rev2 | tominabox1/underscore33/rev2 |
+| vn66 | hnahkb/vn66 |
+| wallaby | kkatano/wallaby |
+| wanten | qpockets/wanten |
+| whitefox | input_club/whitefox |
+| wings42/rev1 | dailycraft/wings42/rev1 |
+| wings42/rev1_extkeys | dailycraft/wings42/rev1_extkeys |
+| wings42/rev2 | dailycraft/wings42/rev2 |
+| yasui | rainkeebs/yasui |
+| yd60mq | ymdk/yd60mq |
+| yd68 | ydkb/yd68 |
+| ymd75 | ymdk/ymd75 |
+| ymd96 | ymdk/ymd96 |
+| ymdk_np21 | ymdk/np21 |
+| yurei | kkatano/yurei |
+| zinc | 25keys/zinc |
+| zinc/rev1 | 25keys/zinc/rev1 |
+| zinc/reva | 25keys/zinc/reva |
+
+## Notable core changes :id=notable-core
+
+### New MCU Support :id=new-mcu-support
+
+Building on previous cycles, QMK firmware picked up support for a couple extra MCU variants:
+
+* STM32L432
+* STM32L442
+
+### New Drivers
+
+QMK now has core-supplied support for the following device peripherals:
+
+#### LED
+
+* IS31FL3742A
+* IS31FL3743A
+* IS31FL3745
+* IS31FL3746A
+
+#### GPIO
+
+* SN74x138
+* mcp23018
+
+---
+
+## Full changelist
+
+Core:
+* Initial pass at data driven new-keyboard subcommand ([#12795](https://github.com/qmk/qmk_firmware/pull/12795))
+* Don't send keyboard reports that propagate no changes to the host ([#14065](https://github.com/qmk/qmk_firmware/pull/14065))
+* Custom matrix lite support for split keyboards ([#14674](https://github.com/qmk/qmk_firmware/pull/14674))
+* Add sym_defer_pr debouncer type ([#14948](https://github.com/qmk/qmk_firmware/pull/14948))
+* Add RGB matrix & LED Matrix support for IS31FL3742A, IS31FL3743A, IS31FL3745, IS31FL3746A ([#14989](https://github.com/qmk/qmk_firmware/pull/14989))
+* New combo configuration options ([#15083](https://github.com/qmk/qmk_firmware/pull/15083))
+* IS31FL3733 driver for LED Matrix ([#15088](https://github.com/qmk/qmk_firmware/pull/15088))
+* Add open-drain GPIO support. ([#15282](https://github.com/qmk/qmk_firmware/pull/15282))
+* Make (un)register code functions weak ([#15285](https://github.com/qmk/qmk_firmware/pull/15285))
+* Split support for pointing devices. ([#15304](https://github.com/qmk/qmk_firmware/pull/15304))
+* Added cancel_key_lock function ([#15321](https://github.com/qmk/qmk_firmware/pull/15321))
+* Remove matrix_is_modified() and debounce_is_active() ([#15349](https://github.com/qmk/qmk_firmware/pull/15349))
+* Change default USB Polling rate to 1kHz ([#15352](https://github.com/qmk/qmk_firmware/pull/15352))
+* Implement MAGIC_TOGGLE_CONTROL_CAPSLOCK ([#15368](https://github.com/qmk/qmk_firmware/pull/15368))
+* Tidy up existing i2c_master implementations ([#15376](https://github.com/qmk/qmk_firmware/pull/15376))
+* Generalize Unicode defines ([#15409](https://github.com/qmk/qmk_firmware/pull/15409))
+* Added external spi flash driver. ([#15419](https://github.com/qmk/qmk_firmware/pull/15419))
+* Remove Deprecated USB Polling comment from vusb.c ([#15420](https://github.com/qmk/qmk_firmware/pull/15420))
+* Expand rotational range for PMW3360 Optical Sensor ([#15431](https://github.com/qmk/qmk_firmware/pull/15431))
+* ChibiOS SVN mirror script update ([#15435](https://github.com/qmk/qmk_firmware/pull/15435))
+* Refactor `bootloader_jump()` implementations ([#15450](https://github.com/qmk/qmk_firmware/pull/15450))
+* added missing audio_off_user() callback ([#15457](https://github.com/qmk/qmk_firmware/pull/15457))
+* Migrate serial_uart usages to UART driver ([#15479](https://github.com/qmk/qmk_firmware/pull/15479))
+* Migrate RN42 to UART driver and refactor ([#15492](https://github.com/qmk/qmk_firmware/pull/15492))
+* pwm3360 driver cleanup and diff reduction to adns9800 ([#15559](https://github.com/qmk/qmk_firmware/pull/15559))
+* Advanced deferred_exec for core-side code. ([#15579](https://github.com/qmk/qmk_firmware/pull/15579))
+* Adjust tap_code16 to account for TAP_HOLD_CAPS_DELAY ([#15635](https://github.com/qmk/qmk_firmware/pull/15635))
+* Slight tidy up of keyboard task loop ([#15725](https://github.com/qmk/qmk_firmware/pull/15725))
+* Unify the key up/down behaviour of RGB keycodes ([#15730](https://github.com/qmk/qmk_firmware/pull/15730))
+* Add PMW3389 optical sensor Support (Updated) ([#15740](https://github.com/qmk/qmk_firmware/pull/15740))
+* ChibiOS: add support for HID Programmable Buttons ([#15787](https://github.com/qmk/qmk_firmware/pull/15787))
+* ChibiOS: shorten USB disconnect state on boot to 50ms ([#15805](https://github.com/qmk/qmk_firmware/pull/15805))
+* Add init function to clear previous matrix effect ([#15815](https://github.com/qmk/qmk_firmware/pull/15815))
+* Optimize initialization of PMW3360 Sensor ([#15821](https://github.com/qmk/qmk_firmware/pull/15821))
+* Add Pixel Flow RGB matrix effect ([#15829](https://github.com/qmk/qmk_firmware/pull/15829))
+* PMW3389 Revert Firmware load during Initilization ([#15859](https://github.com/qmk/qmk_firmware/pull/15859))
+* Combo `TAP_CODE_DELAY` and `clear_weak_mods` ([#15866](https://github.com/qmk/qmk_firmware/pull/15866))
+* Relocate matrix_scan_quantum tasks ([#15882](https://github.com/qmk/qmk_firmware/pull/15882))
+* Adjust mouse key defaults ([#15883](https://github.com/qmk/qmk_firmware/pull/15883))
+* RGB Matrix: Reload from EEPROM ([#15923](https://github.com/qmk/qmk_firmware/pull/15923))
+* Enable a default task throttle for split pointing. ([#15925](https://github.com/qmk/qmk_firmware/pull/15925))
+* Move mcp23018 driver to core ([#15944](https://github.com/qmk/qmk_firmware/pull/15944))
+* Relocate matrix_init_quantum content ([#15953](https://github.com/qmk/qmk_firmware/pull/15953))
+* Align location of some host led logic ([#15954](https://github.com/qmk/qmk_firmware/pull/15954))
+* Rename some Quantum keycodes ([#15968](https://github.com/qmk/qmk_firmware/pull/15968))
+* Migrate more makefile utilities to builddefs sub-directory ([#16002](https://github.com/qmk/qmk_firmware/pull/16002))
+* Various Makefile optimisations ([#16015](https://github.com/qmk/qmk_firmware/pull/16015))
+* Add support for STM32L432, STM32L442. ([#16016](https://github.com/qmk/qmk_firmware/pull/16016))
+* EEPROM refactor: remove `eeprom_teensy.c` by default, use transient instead ([#16020](https://github.com/qmk/qmk_firmware/pull/16020))
+* Deprecate Split Transaction status field ([#16023](https://github.com/qmk/qmk_firmware/pull/16023))
+* Rip out old macro and action_function system ([#16025](https://github.com/qmk/qmk_firmware/pull/16025))
+* Add a script that simplifies running commands under docker. ([#16028](https://github.com/qmk/qmk_firmware/pull/16028))
+* Add support for Q-series on the ckled2001 LED driver ([#16051](https://github.com/qmk/qmk_firmware/pull/16051))
+* Remove unused suspend_idle ([#16063](https://github.com/qmk/qmk_firmware/pull/16063))
+* Initial migration of suspend callbacks ([#16067](https://github.com/qmk/qmk_firmware/pull/16067))
+* Add layout change callbacks to VIA ([#16087](https://github.com/qmk/qmk_firmware/pull/16087))
+* Rename `AdafruitBLE` to `BluefruitLE` ([#16127](https://github.com/qmk/qmk_firmware/pull/16127))
+* Update outputselect to use platform connected state API ([#16185](https://github.com/qmk/qmk_firmware/pull/16185))
+* Remove default pointing device driver. ([#16190](https://github.com/qmk/qmk_firmware/pull/16190))
+* Add SN74x138 demultiplexer driver ([#16217](https://github.com/qmk/qmk_firmware/pull/16217))
+* Standardise error output. ([#16220](https://github.com/qmk/qmk_firmware/pull/16220))
+* Followup to #16220, more test error output. ([#16221](https://github.com/qmk/qmk_firmware/pull/16221))
+* Misc size regression script improvements. ([#16268](https://github.com/qmk/qmk_firmware/pull/16268))
+* Align existing pca9555 driver to better match mcp23018 API ([#16277](https://github.com/qmk/qmk_firmware/pull/16277))
+* Size checks print out target firmware file instead ([#16290](https://github.com/qmk/qmk_firmware/pull/16290))
+
+CLI:
+* `develop` changelog generator: use the PR title instead ([#15537](https://github.com/qmk/qmk_firmware/pull/15537))
+* `develop` changelog generator: skip code formatting in listing ([#16215](https://github.com/qmk/qmk_firmware/pull/16215))
+
+Keyboards:
+* Durgod: Increase scan rate by using wait_us timer ([#14091](https://github.com/qmk/qmk_firmware/pull/14091))
+* Add another GMMK Pro ANSI Keymap with custom RGB. ([#14243](https://github.com/qmk/qmk_firmware/pull/14243))
+* Parse USB device version BCD ([#14580](https://github.com/qmk/qmk_firmware/pull/14580))
+* Add vitoni keymap for GMMK Pro (ISO) ([#15006](https://github.com/qmk/qmk_firmware/pull/15006))
+* Move bm65hsrgb_iso and bm68hsrgb to rev1/ to prepare for updates to the boards ([#15132](https://github.com/qmk/qmk_firmware/pull/15132))
+* Convert ergoinu to SPLIT_KEYBOARD ([#15305](https://github.com/qmk/qmk_firmware/pull/15305))
+* Convert not_so_minidox to SPLIT_KEYBOARD ([#15306](https://github.com/qmk/qmk_firmware/pull/15306))
+* Added new handwired keyboard Wakizashi 40 ([#15336](https://github.com/qmk/qmk_firmware/pull/15336))
+* Convert ai03/orbit to SPLIT_KEYBOARD ([#15340](https://github.com/qmk/qmk_firmware/pull/15340))
+* Remove manual enable of LTO within user keymaps ([#15378](https://github.com/qmk/qmk_firmware/pull/15378))
+* Move to organization folder ([#15481](https://github.com/qmk/qmk_firmware/pull/15481))
+* Convert some more boards to Matrix Lite ([#15489](https://github.com/qmk/qmk_firmware/pull/15489))
+* Organize Reviung boards into a directory ([#15636](https://github.com/qmk/qmk_firmware/pull/15636))
+* move winry25tc to winry/ ([#15637](https://github.com/qmk/qmk_firmware/pull/15637))
+* Rename ymdk_np21 to np21 + move to ymdk vendor folder ([#15641](https://github.com/qmk/qmk_firmware/pull/15641))
+* move ymd96 to ymdk vendor folder ([#15643](https://github.com/qmk/qmk_firmware/pull/15643))
+* move ymd75 to ymdk vendor folder ([#15645](https://github.com/qmk/qmk_firmware/pull/15645))
+* move yd60mq to ymdk vendor folder ([#15647](https://github.com/qmk/qmk_firmware/pull/15647))
+* rename idobo to idobao/id75, move to vendor folder ([#15661](https://github.com/qmk/qmk_firmware/pull/15661))
+* move ID67 to IDOBAO vendor folder ([#15662](https://github.com/qmk/qmk_firmware/pull/15662))
+* move ID80 to IDOBAO vendor folder ([#15665](https://github.com/qmk/qmk_firmware/pull/15665))
+* move ID87 to IDOBAO vendor folder ([#15667](https://github.com/qmk/qmk_firmware/pull/15667))
+* move montex to IDOBAO vendor folder ([#15668](https://github.com/qmk/qmk_firmware/pull/15668))
+* move @yangdigi 's keyboards to a YDKB folder ([#15681](https://github.com/qmk/qmk_firmware/pull/15681))
+* move @kkatano 's keyboards to kkatano user folder ([#15684](https://github.com/qmk/qmk_firmware/pull/15684))
+* Sol 3 Keyboard from RGBKB ([#15687](https://github.com/qmk/qmk_firmware/pull/15687))
+* move cu24, cu75, cu80/v1 into capsunlocked folder ([#15758](https://github.com/qmk/qmk_firmware/pull/15758))
+* move mechkeys keyboards into the mechkeys/ vendor folder ([#15760](https://github.com/qmk/qmk_firmware/pull/15760))
+* move @lyso1 's boards into lyso1/ ([#15767](https://github.com/qmk/qmk_firmware/pull/15767))
+* move prototypist boards into vendor folder ([#15780](https://github.com/qmk/qmk_firmware/pull/15780))
+* move @yiancar 's boards into yiancardesigns/ ([#15781](https://github.com/qmk/qmk_firmware/pull/15781))
+* move novelkeys keyboards to vendor folder ([#15783](https://github.com/qmk/qmk_firmware/pull/15783))
+* move @weirdo-f 's keyboards into weirdo/ ([#15785](https://github.com/qmk/qmk_firmware/pull/15785))
+* move @marksard 's boards to marksard/ ([#15786](https://github.com/qmk/qmk_firmware/pull/15786))
+* move input club keyboards into vendor folder ([#15788](https://github.com/qmk/qmk_firmware/pull/15788))
+* move @monksoffunk 's boards into 25keys/ ([#15789](https://github.com/qmk/qmk_firmware/pull/15789))
+* move @Salicylic-acid3 's keyboards to salicylic-acid3/ ([#15791](https://github.com/qmk/qmk_firmware/pull/15791))
+* move @rainkeebs 's keyboards to rainkeebs/ ([#15797](https://github.com/qmk/qmk_firmware/pull/15797))
+* move standaside into edi/ ([#15798](https://github.com/qmk/qmk_firmware/pull/15798))
+* move @obosob 's boards into obosob/ ([#15799](https://github.com/qmk/qmk_firmware/pull/15799))
+* move @nacly 's boards to nacly/ ([#15801](https://github.com/qmk/qmk_firmware/pull/15801))
+* move @kakunpc 's keebs into kakunpc/ ([#15814](https://github.com/qmk/qmk_firmware/pull/15814))
+* move @qpocket 's keyboards to qpocket/ ([#15827](https://github.com/qmk/qmk_firmware/pull/15827))
+* BDN9 keymap ([#15924](https://github.com/qmk/qmk_firmware/pull/15924))
+* move @matthewdias 's keebs into matthewdias/ ([#15991](https://github.com/qmk/qmk_firmware/pull/15991))
+* move id80 and id75 to v1 to accommodate for id75 v2 and id80 v3 ([#15992](https://github.com/qmk/qmk_firmware/pull/15992))
+* Remove `action_function()` from LFKeyboards boards ([#15993](https://github.com/qmk/qmk_firmware/pull/15993))
+* move @latincompass (aka @18438880 , @haierwangwei2005)'s boards to /latincompass ([#16039](https://github.com/qmk/qmk_firmware/pull/16039))
+* move g heavy industry boards into /gboards ([#16040](https://github.com/qmk/qmk_firmware/pull/16040))
+* move @drhigsby 's boards into /drhigsby ([#16041](https://github.com/qmk/qmk_firmware/pull/16041))
+* More keyboard rules.mk cleanups ([#16044](https://github.com/qmk/qmk_firmware/pull/16044))
+* move @That-Canadian 's boards into /maple_computing ([#16050](https://github.com/qmk/qmk_firmware/pull/16050))
+* move @takai 's keyboards into /recompile_keys ([#16053](https://github.com/qmk/qmk_firmware/pull/16053))
+* move @satt99 's comet46 to satt/ ([#16059](https://github.com/qmk/qmk_firmware/pull/16059))
+* move @ka2hiro 's boards into /kagizaraya ([#16070](https://github.com/qmk/qmk_firmware/pull/16070))
+* move @GlenPickle 's chimera* boards into a folder ([#16072](https://github.com/qmk/qmk_firmware/pull/16072))
+* move @yynmt 's boards into /yynmt ([#16075](https://github.com/qmk/qmk_firmware/pull/16075))
+* move @Biacco42 's keebs into /biacco42 ([#16080](https://github.com/qmk/qmk_firmware/pull/16080))
+* move unikeyboard boards to /unikeyboard ([#16081](https://github.com/qmk/qmk_firmware/pull/16081))
+* move four_banger to bpiphany ([#16082](https://github.com/qmk/qmk_firmware/pull/16082))
+* move @takashiski 's keebs into /takashiski ([#16089](https://github.com/qmk/qmk_firmware/pull/16089))
+* move hid_liber to /bpiphany ([#16091](https://github.com/qmk/qmk_firmware/pull/16091))
+* move spaceholdings boards into /spaceholdings ([#16096](https://github.com/qmk/qmk_firmware/pull/16096))
+* move @7-rate 's keebs to /rate ([#16099](https://github.com/qmk/qmk_firmware/pull/16099))
+* move @npspears 's boards into /checkerboards ([#16100](https://github.com/qmk/qmk_firmware/pull/16100))
+* move @vuhopkep 's keebs into /hnahkb ([#16102](https://github.com/qmk/qmk_firmware/pull/16102))
+* move @ibnuda 's keebs into /ibnuda ([#16108](https://github.com/qmk/qmk_firmware/pull/16108))
+* move @tominabox1 's keebs into /tominabox1 ([#16109](https://github.com/qmk/qmk_firmware/pull/16109))
+* move niu_mini to /kbdfans ([#16112](https://github.com/qmk/qmk_firmware/pull/16112))
+* move woodkeys.click keyboards to /woodkeys ([#16113](https://github.com/qmk/qmk_firmware/pull/16113))
+* move @omkbd 's boards to /omkbd ([#16116](https://github.com/qmk/qmk_firmware/pull/16116))
+* Overhaul Tractyl Manuform ([#16134](https://github.com/qmk/qmk_firmware/pull/16134))
+* Reduce firmware size for dztech/dz60rgb_wkl/v2_1:via ([#16254](https://github.com/qmk/qmk_firmware/pull/16254))
+
+Keyboard fixes:
+* Fix build failure for UT47 ([#15483](https://github.com/qmk/qmk_firmware/pull/15483))
+* Update grs_70ec to use newer custom matrix ([#15609](https://github.com/qmk/qmk_firmware/pull/15609))
+* fix compiler issue with Tractyl Manuform 4x6 ([#15646](https://github.com/qmk/qmk_firmware/pull/15646))
+* Fix CI. ([#15828](https://github.com/qmk/qmk_firmware/pull/15828))
+* Yet another bad `DEFAULT_FOLDER` fix. ([#15904](https://github.com/qmk/qmk_firmware/pull/15904))
+* Fix build failures for `mschwingen/modelm` ([#15987](https://github.com/qmk/qmk_firmware/pull/15987))
+* `rocketboard_16`: Fix mismatched LUT sizes ([#15997](https://github.com/qmk/qmk_firmware/pull/15997))
+* Fix erroneous SRC for Clueboard 66 hotswap ([#16007](https://github.com/qmk/qmk_firmware/pull/16007))
+* Fix handwired/ms_sculpt_mobile default keymap ([#16032](https://github.com/qmk/qmk_firmware/pull/16032))
+* Re-org Hillside folders as new model prep. Fix default keymap. ([#16128](https://github.com/qmk/qmk_firmware/pull/16128))
+* Fix up default folder locations. Again. ([#16135](https://github.com/qmk/qmk_firmware/pull/16135))
+* Sol3 rgb fix ([#16157](https://github.com/qmk/qmk_firmware/pull/16157))
+* Add missing `BOOTLOADER` for a handful of boards ([#16225](https://github.com/qmk/qmk_firmware/pull/16225))
+* Remove half implemented micronucleus bootloader support ([#16252](https://github.com/qmk/qmk_firmware/pull/16252))
+* Fixup bootloaders. ([#16256](https://github.com/qmk/qmk_firmware/pull/16256))
+* Fix idobao/id80/v3 compilation errors ([#16280](https://github.com/qmk/qmk_firmware/pull/16280))
+* Remove parent-relative paths from keyboards. ([#16282](https://github.com/qmk/qmk_firmware/pull/16282))
+* Bodge for helix build failures ([#16376](https://github.com/qmk/qmk_firmware/pull/16376))
+
+Others:
+* Add a clarification to an error message ([#15207](https://github.com/qmk/qmk_firmware/pull/15207))
+* Clang-format tweaks ([#15906](https://github.com/qmk/qmk_firmware/pull/15906))
+* Add example implementations for compatible MCUs list ([#15935](https://github.com/qmk/qmk_firmware/pull/15935))
+* Add version.h to gitignore ([#16222](https://github.com/qmk/qmk_firmware/pull/16222))
+* Update keyboard mapping for all moved boards this cycle ([#16312](https://github.com/qmk/qmk_firmware/pull/16312))
+* Align docs to new-keyboard behaviour ([#16357](https://github.com/qmk/qmk_firmware/pull/16357))
+* Align new-keyboard with recent schema updates ([#16378](https://github.com/qmk/qmk_firmware/pull/16378))
+
+Bugs:
+* Fixes potential wpm sampling overflow, along with code comment fixes ([#15277](https://github.com/qmk/qmk_firmware/pull/15277))
+* Add missing define for unicode common ([#15416](https://github.com/qmk/qmk_firmware/pull/15416))
+* Fix for SPI write timing in PMW3360 driver ([#15519](https://github.com/qmk/qmk_firmware/pull/15519))
+* Documentation Typo fix ([#15538](https://github.com/qmk/qmk_firmware/pull/15538))
+* fix a typo ([#15557](https://github.com/qmk/qmk_firmware/pull/15557))
+* Fix avr serial compile ([#15589](https://github.com/qmk/qmk_firmware/pull/15589))
+* More AVR GPIO compilation fixes. ([#15592](https://github.com/qmk/qmk_firmware/pull/15592))
+* Fix bug and code regression for Split Common ([#15603](https://github.com/qmk/qmk_firmware/pull/15603))
+* Include missing string.h include in split ([#15606](https://github.com/qmk/qmk_firmware/pull/15606))
+* Fixes for bootloader refactor build failures ([#15638](https://github.com/qmk/qmk_firmware/pull/15638))
+* Update pmw3360 driver after reading the datasheet top to bottom. Fix some outdated refs. ([#15682](https://github.com/qmk/qmk_firmware/pull/15682))
+* Fix split pointing for analog joystick ([#15691](https://github.com/qmk/qmk_firmware/pull/15691))
+* Fix broken bootloader builds in develop. ([#15880](https://github.com/qmk/qmk_firmware/pull/15880))
+* Fix optical sensor firmware upload ([#15919](https://github.com/qmk/qmk_firmware/pull/15919))
+* Pass in the keyrecord_t of the dual-role/tapping key when calling per-key tap hold functions ([#15938](https://github.com/qmk/qmk_firmware/pull/15938))
+* fixed typo in orange HSV colors decalartion ([#15976](https://github.com/qmk/qmk_firmware/pull/15976))
+* Fix hack for chibiOS reset name ([#15984](https://github.com/qmk/qmk_firmware/pull/15984))
+* Fix right side ws2812 leds having two indices ([#15985](https://github.com/qmk/qmk_firmware/pull/15985))
+* Workaround in Makefile for recursive rule matching ([#15988](https://github.com/qmk/qmk_firmware/pull/15988))
+* Fix BACKLIGHT_CAPS_LOCK warning ([#15999](https://github.com/qmk/qmk_firmware/pull/15999))
+* Fix compilation issues for led indicators ([#16001](https://github.com/qmk/qmk_firmware/pull/16001))
+* ChibiOS timer fixes ([#16017](https://github.com/qmk/qmk_firmware/pull/16017))
+* Fix bootloader_jump for certain CTRL boards ([#16026](https://github.com/qmk/qmk_firmware/pull/16026))
+* Fix up issue with PROGMEM and hand_swap_config ([#16027](https://github.com/qmk/qmk_firmware/pull/16027))
+* Don't make EEPROM size assumptions with dynamic keymaps. ([#16054](https://github.com/qmk/qmk_firmware/pull/16054))
+* fix missed .noci in reviung move ([#16107](https://github.com/qmk/qmk_firmware/pull/16107))
+* Fix issues with Python Tests ([#16162](https://github.com/qmk/qmk_firmware/pull/16162))
+* Fixup multibuild filegen ([#16166](https://github.com/qmk/qmk_firmware/pull/16166))
+* Remove old .gitignore entry. Add more macOS junk exclusions. ([#16167](https://github.com/qmk/qmk_firmware/pull/16167))
+* Fixup builds so that teensy EEPROM knows which MCU it's targeting. ([#16168](https://github.com/qmk/qmk_firmware/pull/16168))
+* Create a build error if no bootloader is specified. ([#16181](https://github.com/qmk/qmk_firmware/pull/16181))
+* Ensure `version.h` is recreated each build. ([#16188](https://github.com/qmk/qmk_firmware/pull/16188))
+* Add `custom` to list of valid bootloader types in info.json ([#16228](https://github.com/qmk/qmk_firmware/pull/16228))
+* Fix `layer_state` restoration at end of dynamic macro feature #16208 ([#16230](https://github.com/qmk/qmk_firmware/pull/16230))
+* Minor additions #12795 ([#16276](https://github.com/qmk/qmk_firmware/pull/16276))
+* Various fixes for matrix _RIGHT handling ([#16292](https://github.com/qmk/qmk_firmware/pull/16292))
+* Fix slashes in build_full_test.mk ([#16300](https://github.com/qmk/qmk_firmware/pull/16300))
+* ps2/avr: use the correct file name ([#16316](https://github.com/qmk/qmk_firmware/pull/16316))
+* Fix compilation of ChibiOS UART driver ([#16348](https://github.com/qmk/qmk_firmware/pull/16348))
+* Various fixes for new-keyboard ([#16358](https://github.com/qmk/qmk_firmware/pull/16358))
+* Allow NO_PIN within data driven configuration ([#16359](https://github.com/qmk/qmk_firmware/pull/16359))
diff --git a/_summary.md b/_summary.md
index e26d9ae210..74203aa0f8 100644
--- a/_summary.md
+++ b/_summary.md
@@ -37,7 +37,6 @@
* Guides
* [Customizing Functionality](custom_quantum_functions.md)
* [Driver Installation with Zadig](driver_installation_zadig.md)
- * [Easy Maker for One Offs](easy_maker.md)
* [Keymap Overview](keymap.md)
* Development Environments
* [Docker Guide](getting_started_docker.md)
@@ -53,9 +52,6 @@
* [Your Fork](newbs_git_using_your_master_branch.md)
* [Merge Conflicts](newbs_git_resolving_merge_conflicts.md)
* [Fixing Your Branch](newbs_git_resynchronize_a_branch.md)
- * Keyboard Building
- * [Hand Wiring Guide](hand_wire.md)
- * [ISP Flashing Guide](isp_flashing_guide.md)
* Simple Keycodes
* [Full List](keycodes.md)
@@ -124,17 +120,22 @@
* [Thermal Printer](feature_thermal_printer.md)
* [Velocikey](feature_velocikey.md)
+ * Keyboard Building
+ * [Easy Maker for One Offs](easy_maker.md)
+ * [Porting Keyboards](porting_your_keyboard_to_qmk.md)
+ * [Hand Wiring Guide](hand_wire.md)
+ * [ISP Flashing Guide](isp_flashing_guide.md)
+
* Developing QMK
* [PR Checklist](pr_checklist.md)
* Breaking Changes
* [Overview](breaking_changes.md)
* [My Pull Request Was Flagged](breaking_changes_instructions.md)
- * [Most Recent ChangeLog](ChangeLog/20211127.md "QMK v0.15.0 - 2021 Nov 27")
+ * [Most Recent ChangeLog](ChangeLog/20220226.md "QMK v0.16.0 - 2022 Feb 26")
* [Past Breaking Changes](breaking_changes_history.md)
* C Development
* [ARM Debugging Guide](arm_debugging.md)
- * [AVR Processors](hardware_avr.md)
* [Coding Conventions](coding_conventions_c.md)
* [Compatible Microcontrollers](compatible_microcontrollers.md)
* [Drivers](hardware_drivers.md)
diff --git a/breaking_changes.md b/breaking_changes.md
index 8bde6c88f7..3fed268b98 100644
--- a/breaking_changes.md
+++ b/breaking_changes.md
@@ -8,6 +8,7 @@ The breaking change period is when we will merge PR's that change QMK in dangero
## What has been included in past Breaking Changes?
+* [2022 Feb 26](ChangeLog/20220226.md)
* [2021 Nov 27](ChangeLog/20211127.md)
* [2021 Aug 28](ChangeLog/20210828.md)
* [2021 May 29](ChangeLog/20210529.md)
@@ -20,17 +21,17 @@ The breaking change period is when we will merge PR's that change QMK in dangero
## When is the next Breaking Change?
-The next Breaking Change is scheduled for February 26, 2022.
+The next Breaking Change is scheduled for May 28, 2022.
### Important Dates
-* [x] 2021 Nov 27 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
-* [ ] 2022 Jan 31 - `develop` closed to new PR's.
-* [ ] 2022 Jan 31 - Call for testers.
-* [ ] 2022 Feb 12 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
-* [ ] 2022 Feb 24 - `master` is locked, no PR's merged.
-* [ ] 2022 Feb 26 - Merge `develop` to `master`.
-* [ ] 2022 Feb 26 - `master` is unlocked. PR's can be merged again.
+* [x] 2022 Feb 26 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
+* [ ] 2022 Apr 31 - `develop` closed to new PR's.
+* [ ] 2022 Apr 31 - Call for testers.
+* [ ] 2022 May 14 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes
+* [ ] 2022 May 26 - `master` is locked, no PR's merged.
+* [ ] 2022 May 28 - Merge `develop` to `master`.
+* [ ] 2022 May 28 - `master` is unlocked. PR's can be merged again.
## What changes will be included?
diff --git a/breaking_changes_history.md b/breaking_changes_history.md
index 6b1b71b1fd..c40989fb5e 100644
--- a/breaking_changes_history.md
+++ b/breaking_changes_history.md
@@ -2,6 +2,7 @@
This page links to all previous changelogs from the QMK Breaking Changes process.
+* [2022 Feb 26](ChangeLog/20220226.md) - version 0.16.0
* [2021 Nov 27](ChangeLog/20211127.md) - version 0.15.0
* [2021 Aug 28](ChangeLog/20210828.md) - version 0.14.0
* [2021 May 29](ChangeLog/20210529.md) - version 0.13.0
diff --git a/cli_commands.md b/cli_commands.md
index dfbd4c6a28..93af906b8a 100644
--- a/cli_commands.md
+++ b/cli_commands.md
@@ -310,7 +310,7 @@ Any arguments that are not provided will prompt for input. If `-u` is not passed
**Usage**:
```
-qmk new-keyboard [-kb KEYBOARD] [-t {avr,ps2avrgb}] -u USERNAME
+qmk new-keyboard [-kb KEYBOARD] [-t {atmega32u4,STM32F303,etc}] [-l {60_ansi,75_iso,etc}] -u USERNAME
```
## `qmk new-keymap`
diff --git a/compatible_microcontrollers.md b/compatible_microcontrollers.md
index 1f46a1c634..1c5e37f724 100644
--- a/compatible_microcontrollers.md
+++ b/compatible_microcontrollers.md
@@ -1,6 +1,6 @@
# Compatible Microcontrollers
-QMK runs on any USB-capable AVR or ARM microcontroller with enough flash space - generally 32kB or more, though it will *just* squeeze into 16kB with most features disabled.
+QMK runs on any USB-capable AVR or ARM microcontroller with enough flash space - generally 32kB+ for AVR, and 64kB+ for ARM. With significant disabling of features, QMK may *just* squeeze into 16kB AVR MCUs.
## Atmel AVR
@@ -8,7 +8,11 @@ The following use [LUFA](https://www.fourwalledcubicle.com/LUFA.php) as the USB
* [ATmega16U2](https://www.microchip.com/wwwproducts/en/ATmega16U2) / [ATmega32U2](https://www.microchip.com/wwwproducts/en/ATmega32U2)
* [ATmega16U4](https://www.microchip.com/wwwproducts/en/ATmega16U4) / [ATmega32U4](https://www.microchip.com/wwwproducts/en/ATmega32U4)
+ * SparkFun Pro Micro (and clones)
+ * PJRC Teensy 2.0
+ * Adafruit Feather 32U4
* [AT90USB64](https://www.microchip.com/wwwproducts/en/AT90USB646) / [AT90USB128](https://www.microchip.com/wwwproducts/en/AT90USB1286)
+ * PJRC Teensy++ 2.0
* [AT90USB162](https://www.microchip.com/wwwproducts/en/AT90USB162)
Certain MCUs which do not have native USB will use [V-USB](https://www.obdev.at/products/vusb/index.html) instead:
@@ -25,17 +29,23 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
* [STM32F0x2](https://www.st.com/en/microcontrollers-microprocessors/stm32f0x2.html)
* [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)
+ * Bluepill (with STM32duino bootloader)
* [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html)
+ * QMK Proton-C
* [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html)
+ * WeAct Blackpill
* [STM32F405](https://www.st.com/en/microcontrollers-microprocessors/stm32f405-415.html)
* [STM32F407](https://www.st.com/en/microcontrollers-microprocessors/stm32f407-417.html)
* [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html)
+ * WeAct Blackpill
* [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html)
* [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html)
* [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html)
* [STM32L412](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
* [STM32L422](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
+ * [STM32L432](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
* [STM32L433](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html)
+ * [STM32L442](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
* [STM32L443](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html)
### WestBerryTech (WB32)
@@ -45,13 +55,16 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
### NXP (Kinetis)
* [MKL26Z64](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/kl-series-cortex-m0-plus/kinetis-kl2x-72-96-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x)
+ * PJRC Teensy LC
* [MK20DX128](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-50-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-based-on-arm-cortex-m4-core:K20_50)
* [MK20DX256](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72)
+ * PJRC Teensy 3.2
* [MK66FX1M0](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k6x-ethernet/kinetis-k66-180-mhz-dual-high-speed-full-speed-usbs-2mb-flash-microcontrollers-mcus-based-on-arm-cortex-m4-core:K66_180)
+ * PJRC Teensy 3.6
## Atmel ATSAM
-There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop).
+There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop). However, it is not recommended to design a board with this microcontroller as the support is quite specialized to Massdrop hardware.
## RISC-V
diff --git a/config_options.md b/config_options.md
index 15ad945b22..838c4d86fd 100644
--- a/config_options.md
+++ b/config_options.md
@@ -126,10 +126,6 @@ If you define these options you will disable the associated feature, which can s
* disable tap dance and other tapping features
* `#define NO_ACTION_ONESHOT`
* disable one-shot modifiers
-* `#define NO_ACTION_MACRO`
- * disable old-style macro handling using `MACRO()`, `action_get_macro()` _(deprecated)_
-* `#define NO_ACTION_FUNCTION`
- * disable old-style function handling using `fn_actions`, `action_function()` _(deprecated)_
## Features That Can Be Enabled
@@ -385,7 +381,6 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i
* A list of [layouts](feature_layouts.md) this keyboard supports.
* `LTO_ENABLE`
* Enables Link Time Optimization (LTO) when compiling the keyboard. This makes the process take longer, but it can significantly reduce the compiled size (and since the firmware is small, the added time is not noticeable).
-However, this will automatically disable the legacy TMK Macros and Functions features, as these break when LTO is enabled. It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`. (Note: This does not affect QMK [Macros](feature_macros.md) and [Layers](feature_layers.md).)
## AVR MCU Options
* `MCU = atmega32u4`
@@ -436,8 +431,8 @@ Use these to enable or disable building certain features. The more you have enab
* MIDI controls
* `UNICODE_ENABLE`
* Unicode
-* `BLUETOOTH`
- * Current options are AdafruitBLE, RN42
+* `BLUETOOTH_ENABLE`
+ * Current options are BluefruitLE, RN42
* `SPLIT_KEYBOARD`
* Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
* `CUSTOM_MATRIX`
diff --git a/feature_bluetooth.md b/feature_bluetooth.md
index f6fb02d948..d4ed494053 100644
--- a/feature_bluetooth.md
+++ b/feature_bluetooth.md
@@ -7,7 +7,7 @@ Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QM
|Board |Bluetooth Protocol |Connection Type|rules.mk |Bluetooth Chip|
|----------------------------------------------------------------|--------------------|---------------|--------------------------------|--------------|
|Roving Networks RN-42 (Sparkfun Bluesmirf) |Bluetooth Classic |UART |`BLUETOOTH_DRIVER = RN42` |RN-42 |
-|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy|SPI |`BLUETOOTH_DRIVER = AdafruitBLE`|nRF51822 |
+|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy|SPI |`BLUETOOTH_DRIVER = BluefruitLE`|nRF51822 |
Not Supported Yet but possible:
* [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
@@ -17,9 +17,9 @@ Not Supported Yet but possible:
### Adafruit BLE SPI Friend
Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF51822 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
-* `#define ADAFRUIT_BLE_RST_PIN D4`
-* `#define ADAFRUIT_BLE_CS_PIN B4`
-* `#define ADAFRUIT_BLE_IRQ_PIN E6`
+* `#define BLUEFRUIT_LE_RST_PIN D4`
+* `#define BLUEFRUIT_LE_CS_PIN B4`
+* `#define BLUEFRUIT_LE_IRQ_PIN E6`
A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
@@ -32,7 +32,7 @@ Add the following to your `rules.mk`:
```make
BLUETOOTH_ENABLE = yes
-BLUETOOTH_DRIVER = AdafruitBLE # or RN42
+BLUETOOTH_DRIVER = BluefruitLE # or RN42
```
## Bluetooth Keycodes
diff --git a/feature_combo.md b/feature_combo.md
index 47128c431b..c0e10f09d5 100644
--- a/feature_combo.md
+++ b/feature_combo.md
@@ -141,10 +141,13 @@ Processing combos has two buffers, one for the key presses, another for the comb
## Modifier Combos
If a combo resolves to a Modifier, the window for processing the combo can be extended independently from normal combos. By default, this is disabled but can be enabled with `#define COMBO_MUST_HOLD_MODS`, and the time window can be configured with `#define COMBO_HOLD_TERM 150` (default: `TAPPING_TERM`). With `COMBO_MUST_HOLD_MODS`, you cannot tap the combo any more which makes the combo less prone to misfires.
-## Per Combo Timing, Holding and Tapping
-For each combo, it is possible to configure the time window it has to pressed in, if it needs to be held down, or if it needs to be tapped.
+## Strict key press order
+By defining `COMBO_MUST_PRESS_IN_ORDER` combos only activate when the keys are pressed in the same order as they are defined in the key array.
-For example, tap-only combos are useful if any (or all) of the underlying keys is a Mod-Tap or a Layer-Tap key. When you tap the combo, you get the combo result. When you press the combo and hold it down, the combo doesn't actually activate. Instead the keys are processed separately as if the combo wasn't even there.
+## Per Combo Timing, Holding, Tapping and Key Press Order
+For each combo, it is possible to configure the time window it has to pressed in, if it needs to be held down, if it needs to be tapped, or if its keys need to be pressed in order.
+
+For example, tap-only combos are useful if any (or all) of the underlying keys are mod-tap or layer-tap keys. When you tap the combo, you get the combo result. When you press the combo and hold it down, the combo doesn't activate. Instead the keys are processed separately as if the combo wasn't even there.
In order to use these features, the following configuration options and functions need to be defined. Coming up with useful timings and configuration is left as an exercise for the reader.
@@ -153,6 +156,7 @@ In order to use these features, the following configuration options and function
| `COMBO_TERM_PER_COMBO` | uint16_t get_combo_term(uint16_t index, combo_t \*combo) | Optional per-combo timeout window. (default: `COMBO_TERM`) |
| `COMBO_MUST_HOLD_PER_COMBO` | bool get_combo_must_hold(uint16_t index, combo_t \*combo) | Controls if a given combo should fire immediately on tap or if it needs to be held. (default: `false`) |
| `COMBO_MUST_TAP_PER_COMBO` | bool get_combo_must_tap(uint16_t index, combo_t \*combo) | Controls if a given combo should fire only if tapped within `COMBO_HOLD_TERM`. (default: `false`) |
+| `COMBO_MUST_PRESS_IN_ORDER_PER_COMBO` | bool get_combo_must_press_in_order(uint16_t index, combo_t \*combo) | Controls if a given combo should fire only if its keys are pressed in order. (default: `true`) |
Examples:
```c
@@ -216,6 +220,38 @@ bool get_combo_must_tap(uint16_t index, combo_t *combo) {
return false;
}
+
+bool get_combo_must_press_in_order(uint16_t combo_index, combo_t *combo) {
+ switch (combo_index) {
+ /* List combos here that you want to only activate if their keys
+ * are pressed in the same order as they are defined in the combo's key
+ * array. */
+ case COMBO_NAME_HERE:
+ return true;
+ default:
+ return false;
+ }
+}
+```
+
+## Generic hook to (dis)allow a combo activation
+
+By defining `COMBO_SHOULD_TRIGGER` and its companying function `bool combo_should_trigger(uint16_t combo_index, combo_t *combo, uint16_t keycode, keyrecord_t *record)` you can block or allow combos to activate on the conditions of your choice.
+For example, you could disallow some combos on the base layer and allow them on another. Or disable combos on the home row when a timer is running.
+
+Examples:
+```c
+bool combo_should_trigger(uint16_t combo_index, combo_t *combo, uint16_t keycode, keyrecord_t *record) {
+ /* Disable combo `SOME_COMBO` on layer `_LAYER_A` */
+ switch (combo_index) {
+ case SOME_COMBO:
+ if (layer_state_is(_LAYER_A)) {
+ return false;
+ }
+ }
+
+ return true;
+}
```
## Variable Length Combos
diff --git a/feature_debounce_type.md b/feature_debounce_type.md
index f37a785b1e..9cd736a24a 100644
--- a/feature_debounce_type.md
+++ b/feature_debounce_type.md
@@ -116,6 +116,7 @@ Where name of algorithm is one of:
For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be
appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use.
* ```sym_eager_pk``` - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key
+* ```sym_defer_pr``` - debouncing per row. On any state change, a per-row timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that row, the entire row is pushed. Can improve responsiveness over `sym_defer_g` while being less susceptible than per-key debouncers to noise.
* ```sym_defer_pk``` - debouncing per key. On any state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key status change is pushed.
* ```asym_eager_defer_pk``` - debouncing per key. On a key-down state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key. On a key-up state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key-up status change is pushed.
diff --git a/feature_grave_esc.md b/feature_grave_esc.md
index f135b1dede..09d098ee4e 100644
--- a/feature_grave_esc.md
+++ b/feature_grave_esc.md
@@ -4,17 +4,17 @@ If you're using a 60% keyboard, or any other layout with no F-row, you will have
## Usage
-Replace the `KC_GRV` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead.
+Replace the `KC_GRV` key in your keymap (usually to the left of the `1` key) with `QK_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead.
## What Your OS Sees
-If Mary presses GESC on her keyboard, the OS will see an KC_ESC character. Now if Mary holds Shift down and presses GESC it will output `~`, or a shifted backtick. Now if she holds GUI/CMD/WIN, it will output a simple ` character.
+If Mary presses `QK_GESC` on her keyboard, the OS will see an KC_ESC character. Now if Mary holds Shift down and presses `QK_GESC` it will output `~`, or a shifted backtick. Now if she holds GUI/CMD/WIN, it will output a simple ` character.
## Keycodes
-|Key |Aliases |Description |
-|---------|-----------|------------------------------------------------------------------|
-|`KC_GESC`|`GRAVE_ESC`|Escape when pressed, ` when Shift or GUI are held|
+|Key |Aliases |Description |
+|-----------------|---------|------------------------------------------------------------------|
+|`QK_GRAVE_ESCAPE`|`QK_GESC`|Escape when pressed, ` when Shift or GUI are held|
### Caveats
diff --git a/feature_haptic_feedback.md b/feature_haptic_feedback.md
index c8c74cb8f0..63ac4305ff 100644
--- a/feature_haptic_feedback.md
+++ b/feature_haptic_feedback.md
@@ -167,7 +167,7 @@ List of waveform sequences from the datasheet:
```
#define DRV_GREETING *sequence name or number*
```
-If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence during startup. That can be selected using the following define:
+If haptic feedback is enabled, the keyboard will vibrate to a specific sequence during startup. That can be selected using the following define:
```
#define DRV_MODE_DEFAULT *sequence name or number*
@@ -191,9 +191,6 @@ With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will n
* `TT()` layer tap toggle keys, when held to activate a layer. However when tapped `TAPPING_TOGGLE` times to permanently toggle the layer, on the last tap haptic feedback is still triggered.
* `MT()` mod tap keys, when held to keep a usual modifier key pressed. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. See also [Mod-Tap](mod_tap.md).
-### NO_HAPTIC_FN
-With the entry of `#define NO_HAPTIC_FN` in config.h, deprecated `fn_actions` type function keys will not trigger a feedback.
-
### NO_HAPTIC_ALPHA
With the entry of `#define NO_HAPTIC_ALPHA` in config.h, none of the alpha keys (A ... Z) will trigger a feedback.
@@ -207,4 +204,4 @@ With the entry of `#define NO_HAPTIC_LOCKKEYS` in config.h, none of the followin
With the entry of `#define NO_HAPTIC_NAV` in config.h, none of the following keys will trigger a feedback: Print Screen, Pause, Insert, Delete, Page Down, Page Up, Left Arrow, Up Arrow, Right Arrow, Down Arrow, End, Home.
### NO_HAPTIC_NUMERIC
-With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback.
\ No newline at end of file
+With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback.
diff --git a/feature_key_lock.md b/feature_key_lock.md
index 8e6e29f0e6..7681394229 100644
--- a/feature_key_lock.md
+++ b/feature_key_lock.md
@@ -19,4 +19,5 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th
Key Lock is only able to hold standard action keys and [One Shot modifier](one_shot_keys.md) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
-Switching layers will not cancel the Key Lock.
+Switching layers will not cancel the Key Lock. The Key Lock can be cancelled by calling the `cancel_key_lock()` function.
+
diff --git a/feature_led_matrix.md b/feature_led_matrix.md
index 37f38cc6ed..37c74843aa 100644
--- a/feature_led_matrix.md
+++ b/feature_led_matrix.md
@@ -67,6 +67,109 @@ const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/led/issi/is31fl3731-simple.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` ).
+---
+### IS31FLCOMMON :id=is31flcommon
+
+There is basic support for addressable LED matrix lighting with a selection of I2C ISSI Lumissil LED controllers through a shared common driver. To enable it, add this to your `rules.mk`:
+
+```makefile
+LED_MATRIX_ENABLE = yes
+LED_MATRIX_DRIVER =
+```
+
+Where `` is the applicable LED driver chip as below
+
+| Driver Name | Data Sheet | Capability |
+|-------------|------------|------------|
+| `IS31FL3742A` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3742A_DS.pdf) | 180 LED, 30x6 Matrix |
+| `ISSIFL3743A` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3743A_DS.pdf) | 198 LED, 18x11 Matrix |
+| `IS31FL3745` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3745_DS.pdf) | 144 LED, 18x8 Matrix |
+| `IS31FL3746A` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3746A_DS.pdf) | 72 LED, 18x4 Matrix |
+
+You can use between 1 and 4 IC's. Do not specify `DRIVER_ADDR_` define for IC's if not present on your keyboard. The `DRIVER_ADDR_1` default assumes that all Address pins on the controller have been connected to GND. Drivers that have SYNC functionality have the default settings to disable if 1 driver. If more than 1 drivers then `DRIVER_ADDR_1` will be set to Master and the remaiing ones set to Slave.
+
+Configure the hardware via your `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `DRIVER_COUNT` | (Required) How many LED driver IC's are present | |
+| `DRIVER_LED_TOTAL` | (Required) How many LED lights are present across all drivers | |
+| `DRIVER_ADDR_1` | (Optional) Address for the first LED driver | |
+| `DRIVER_ADDR_` | (Required) Address for the additional LED drivers | |
+| `ISSI_SSR_` | (Optional) Configuration for the Spread Spectrum Register | |
+| `ISSI_CONFIGURATION` | (Optional) Configuration for the Configuration Register | |
+| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `ISSI_PULLDOWNUP` | (Optional) Configuration for the Pull Up & Pull Down Register | |
+| `ISSI_TEMP` | (Optional) Configuration for the Tempature Register | |
+| `ISSI_PWM_ENABLE` | (Optional) Configuration for the PWM Enable Register | |
+| `ISSI_PWM_SET` | (Optional) Configuration for the PWM Setting Register | |
+| `ISSI_SCAL_LED ` | (Optional) Configuration for the LEDs Scaling Registers | 0xFF |
+| `ISSI_MANUAL_SCALING` | (Optional) If you wish to configure the Scaling Registers manually | |
+
+
+Defaults
+
+| Variable | IS31FL3742A | IS31FL3743A | IS31FL3745 | IS31FL3746 |
+|----------|-------------|-------------|------------|------------|
+| `DRIVER_ADDR_1` | 0b0110000 | 0b0100000 | 0b0100000 | 0b1100000 |
+| `ISSI_SSR_1` | 0x00 | 0x00 / 0x60 | 0x00 / 0xC0 | 0x00 |
+| `ISSI_SSR_<2-4>` | 0x00 | 0x40 | 0x80 | 0x00 |
+| `ISSI_CONFIGURATION` | 0x31 | 0x01 | 0x31 | 0x01 |
+| `ISSI_PULLDOWNUP` | 0x55 | 0x33 | 0x33 | 0x33 |
+| `ISSI_TEMP` | N/A | 0x00 | 0x00 | 0x00 |
+| `ISSI_PWM_ENABLE` | N/A | N/A | N/A | 0x00 |
+| `ISSI_PWM_SET` | 0x00 | N/A | N/A | 0x00 |
+
+Here is an example using 2 drivers.
+
+```c
+#define DRIVER_ADDR_2 0b0100001
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 66
+#define DRIVER_2_LED_TOTAL 42
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+```
+!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+
+Currently only 4 drivers are supported, but it would be trivial to support for more. Note that using a combination of different drivers is not supported. All drivers must be of the same model.
+
+Define these arrays listing all the LEDs in your `.c`:
+
+```c
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | LED address
+ * | | */
+ { 0, CS1_SW1 },
+ { 0, CS2_SW1 },
+ // ...
+}
+```
+
+Where `CSx_SWx` is the location of the LED in the matrix defined by the datasheet. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` for now).
+
+`ISSI_MANUAL_SCALING` is used to override the Scaling for individual LED's. By default they will be set as per `ISSI_SCAL_LED`. In `config.h` set how many LED's you want to manually set scaling for.
+Eg `#define ISSI_MANUAL_SCALING 3`
+
+Then Define the array listing all the LEDs you want to override in your `.c`:
+
+```c
+const is31_led __flash g_is31_scaling[ISSI_MANUAL_SCALING] = {
+ * LED Index
+ * | Scaling
+ * | | */
+ {5, 120},
+ {9, 120},
+ ....
+}
+```
+
+Where LED Index is the position of the LED in the `g_is31_leds` array. The `scaling` value between 0 and 255 to be written to the Scaling Register.
+
---
## Common Configuration :id=common-configuration
diff --git a/feature_mouse_keys.md b/feature_mouse_keys.md
index 30f563a95d..905da36e43 100644
--- a/feature_mouse_keys.md
+++ b/feature_mouse_keys.md
@@ -59,13 +59,13 @@ This is the default mode. You can adjust the cursor and scrolling acceleration u
|Define |Default|Description |
|----------------------------|-------|---------------------------------------------------------|
-|`MOUSEKEY_DELAY` |300 |Delay between pressing a movement key and cursor movement|
-|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements in milliseconds |
-|`MOUSEKEY_MOVE_DELTA` |5 |Step size |
+|`MOUSEKEY_DELAY` |10 |Delay between pressing a movement key and cursor movement|
+|`MOUSEKEY_INTERVAL` |20 |Time between cursor movements in milliseconds |
+|`MOUSEKEY_MOVE_DELTA` |8 |Step size |
|`MOUSEKEY_MAX_SPEED` |10 |Maximum cursor speed at which acceleration stops |
-|`MOUSEKEY_TIME_TO_MAX` |20 |Time until maximum cursor speed is reached |
-|`MOUSEKEY_WHEEL_DELAY` |300 |Delay between pressing a wheel key and wheel movement |
-|`MOUSEKEY_WHEEL_INTERVAL` |100 |Time between wheel movements |
+|`MOUSEKEY_TIME_TO_MAX` |30 |Time until maximum cursor speed is reached |
+|`MOUSEKEY_WHEEL_DELAY` |10 |Delay between pressing a wheel key and wheel movement |
+|`MOUSEKEY_WHEEL_INTERVAL` |80 |Time between wheel movements |
|`MOUSEKEY_WHEEL_MAX_SPEED` |8 |Maximum number of scroll steps per scroll action |
|`MOUSEKEY_WHEEL_TIME_TO_MAX`|40 |Time until maximum scroll speed is reached |
@@ -85,9 +85,9 @@ This is an extension of the accelerated mode. The kinetic mode uses a quadratic
|Define |Default |Description |
|--------------------------------------|---------|---------------------------------------------------------------|
|`MK_KINETIC_SPEED` |undefined|Enable kinetic mode |
-|`MOUSEKEY_DELAY` |8 |Delay between pressing a movement key and cursor movement |
-|`MOUSEKEY_INTERVAL` |8 |Time between cursor movements in milliseconds |
-|`MOUSEKEY_MOVE_DELTA` |25 |Step size for accelerating from initial to base speed |
+|`MOUSEKEY_DELAY` |5 |Delay between pressing a movement key and cursor movement |
+|`MOUSEKEY_INTERVAL` |10 |Time between cursor movements in milliseconds |
+|`MOUSEKEY_MOVE_DELTA` |5 |Step size for accelerating from initial to base speed |
|`MOUSEKEY_INITIAL_SPEED` |100 |Initial speed of the cursor in pixel per second |
|`MOUSEKEY_BASE_SPEED` |1000 |Maximum cursor speed at which acceleration stops |
|`MOUSEKEY_DECELERATED_SPEED` |400 |Decelerated cursor speed |
diff --git a/feature_pointing_device.md b/feature_pointing_device.md
index fb6936620c..4b39599f8a 100644
--- a/feature_pointing_device.md
+++ b/feature_pointing_device.md
@@ -2,7 +2,7 @@
Pointing Device is a generic name for a feature intended to be generic: moving the system pointer around. There are certainly other options for it - like mousekeys - but this aims to be easily modifiable and hardware driven. You can implement custom keys to control functionality, or you can gather information from other peripherals and insert it directly here - let QMK handle the processing for you.
-To enable Pointing Device, uncomment the following line in your rules.mk:
+To enable Pointing Device, add the following line in your rules.mk and specify one of the driver options below.
```make
POINTING_DEVICE_ENABLE = yes
@@ -40,13 +40,13 @@ POINTING_DEVICE_DRIVER = adns9800
The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking.
-| Setting | Description | Default |
-|------------------------|------------------------------------------------------------------------|---------------|
-|`ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
-|`ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
-|`ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
-|`ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
-|`ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
+| Setting | Description | Default |
+|--------------------------------|------------------------------------------------------------------------|---------------|
+|`ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
+|`ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
+|`ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
+|`ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
+|`ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI.
@@ -69,7 +69,7 @@ The Analog Joystick is an analog (ADC) driven sensor. There are a variety of jo
|`ANALOG_JOYSTICK_AXIS_MAX` | (Optional) Sets the upper range to be considered movement. | `1023` |
|`ANALOG_JOYSTICK_SPEED_REGULATOR` | (Optional) The divisor used to slow down movement. (lower makes it faster) | `20` |
|`ANALOG_JOYSTICK_READ_INTERVAL` | (Optional) The interval in milliseconds between reads. | `10` |
-|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maxiumum value used for motion. | `2` |
+|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maximum value used for motion. | `2` |
|`ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ |
@@ -127,11 +127,10 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t
| Setting | Description | Default |
|-------------------------------------|------------------------------------------------------------------------------------|---------|
|`PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` |
-|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `100` |
-|`PIMORONI_TRACKBALL_INTERVAL_MS` | (Optional) The update/read interval for the sensor in milliseconds. | `8` |
+|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` |
|`PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` |
|`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` |
-|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` |
+|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` |
### PMW 3360 Sensor
@@ -145,20 +144,50 @@ The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for su
| Setting | Description | Default |
|-----------------------------|--------------------------------------------------------------------------------------------|---------------|
-|`PMW3360_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
-|`PMW3360_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
-|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
-|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
-|`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
-|`PMW3360_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
-|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` |
+|`PMW3360_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
+|`PMW3360_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
+|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
+|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
+|`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
+|`PMW3360_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
+|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor.| `0` |
+|`PMW3360_FIRMWARE_UPLOAD_FAST` | (Optional) Skips the 15us wait between firmware blocks. | _not defined_ |
The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI.
+### PMW 3389 Sensor
+
+To use the PMW 3389 sensor, add this to your `rules.mk`
+
+```make
+POINTING_DEVICE_DRIVER = pmw3389
+```
+
+The PMW 3389 is an SPI driven optical sensor, that uses a built in IR LED for surface tracking.
+
+| Setting | Description | Default |
+|---------------------------------|--------------------------------------------------------------------------------------------|---------------|
+|`PMW3389_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
+|`PMW3389_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
+|`PMW3389_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
+|`PMW3389_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
+|`PMW3389_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
+|`PMW3389_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
+|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` |
+|`PMW3389_FIRMWARE_UPLOAD_FAST` | (Optional) Skips the 15us wait between firmware blocks. | _not defined_ |
+
+The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI.
+
### Custom Driver
-If you have a sensor type that isn't supported here, you can manually implement it, by adding these functions (with the correct implementation for your device):
+If you have a sensor type that isn't supported above, a custom option is available by adding the following to your `rules.mk`
+
+```make
+POINTING_DEVICE_DRIVER = custom
+```
+
+Using the custom driver will require implementing the following functions:
```c
void pointing_device_driver_init(void) {}
@@ -171,14 +200,35 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
## Common Configuration
-| Setting | Description | Default |
-|-------------------------------|-----------------------------------------------------------------------|---------------|
-|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ |
-|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ |
-|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ |
-|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ |
-|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ |
-|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ |
+| Setting | Description | Default |
+|----------------------------------|-----------------------------------------------------------------------|-------------------|
+|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ |
+|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ |
+|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ |
+|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ |
+|`POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ |
+
+!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and `POINTING_DEVICE_TASK_THROTTLE_MS` will default to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness.
+
+
+## Split Keyboard Configuration
+
+The following configuration options are only available when using `SPLIT_POINTING_ENABLE` see [data sync options](feature_split_keyboard.md?id=data-sync-options). The rotation and invert `*_RIGHT` options are only used with `POINTING_DEVICE_COMBINED`. If using `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` use the common configuration above to configure your pointing device.
+
+| Setting | Description | Default |
+|----------------------------------------|-----------------------------------------------------------------------|---------------|
+|`POINTING_DEVICE_LEFT` | Pointing device on the left side (Required - pick one only) | _not defined_ |
+|`POINTING_DEVICE_RIGHT` | Pointing device on the right side (Required - pick one only) | _not defined_ |
+|`POINTING_DEVICE_COMBINED` | Pointing device on both sides (Required - pick one only) | _not defined_ |
+|`POINTING_DEVICE_ROTATION_90_RIGHT` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_180_RIGHT` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_270_RIGHT` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ |
+|`POINTING_DEVICE_INVERT_X_RIGHT` | (Optional) Inverts the X axis report. | _not defined_ |
+|`POINTING_DEVICE_INVERT_Y_RIGHT` | (Optional) Inverts the Y axis report. | _not defined_ |
+
+!> If there is a `_RIGHT` configuration option or callback, the [common configuration](feature_pointing_device.md?id=common-configuration) option will work for the left. For correct left/right detection you should setup a [handedness option](feature_split_keyboard?id=setting-handedness), `EE_HANDS` is usually a good option for an existing board that doesn't do handedness by hardware.
## Callbacks and Functions
@@ -188,7 +238,7 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
| `pointing_device_init_kb(void)` | Callback to allow for keyboard level initialization. Useful for additional hardware sensors. |
| `pointing_device_init_user(void)` | Callback to allow for user level initialization. Useful for additional hardware sensors. |
| `pointing_device_task_kb(mouse_report)` | Callback that sends sensor data, so keyboard code can intercept and modify the data. Returns a mouse report. |
-| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user coe can intercept and modify the data. Returns a mouse report. |
+| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user code can intercept and modify the data. Returns a mouse report. |
| `pointing_device_handle_buttons(buttons, pressed, button)` | Callback to handle hardware button presses. Returns a `uint8_t`. |
| `pointing_device_get_cpi(void)` | Gets the current CPI/DPI setting from the sensor, if supported. |
| `pointing_device_set_cpi(uint16_t)` | Sets the CPI/DPI, if supported. |
@@ -196,6 +246,21 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
| `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. |
| `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. |
| `has_mouse_report_changed(old, new)` | Compares the old and new `mouse_report_t` data and returns true only if it has changed. |
+| `pointing_device_adjust_by_defines(mouse_report)` | Applies rotations and invert configurations to a raw mouse report. |
+
+
+## Split Keyboard Callbacks and Functions
+
+The combined functions below are only available when using `SPLIT_POINTING_ENABLE` and `POINTING_DEVICE_COMBINED`. The 2 callbacks `pointing_device_task_combined_*` replace the single sided equivalents above. See the [combined pointing devices example](feature_pointing_device.md?id=combined-pointing-devices)
+
+| Function | Description |
+|-----------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------|
+| `pointing_device_set_shared_report(mouse_report)` | Sets the shared mouse report to the assigned `mouse_report_t` data structured passed to the function. |
+| `pointing_device_set_cpi_on_side(bool, uint16_t)` | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right` |
+| `pointing_device_combine_reports(left_report, right_report)` | Returns a combined mouse_report of left_report and right_report (as a `mouse_report_t` data structure) |
+| `pointing_device_task_combined_kb(left_report, right_report)` | Callback, so keyboard code can intercept and modify the data. Returns a combined mouse report. |
+| `pointing_device_task_combined_user(left_report, right_report)` | Callback, so user code can intercept and modify. Returns a combined mouse report using `pointing_device_combine_reports` |
+| `pointing_device_adjust_by_defines_right(mouse_report)` | Applies right side rotations and invert configurations to a raw mouse report. |
# Manipulating Mouse Reports
@@ -274,3 +339,62 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
```
This allows you to toggle between scrolling and cursor movement by pressing the DRAG_SCROLL key.
+
+## Split Examples
+
+The following examples make use the `SPLIT_POINTING_ENABLE` functionality and show how to manipulate the mouse report for a scrolling mode.
+
+### Single Pointing Device
+
+The following example will work with either `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` and enables scrolling mode while on a particular layer.
+
+```c
+
+static bool scrolling_mode = false;
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ switch (get_highest_layer(state)) {
+ case _RAISE: // If we're on the _RAISE layer enable scrolling mode
+ scrolling_mode = true;
+ pointing_device_set_cpi(2000);
+ break;
+ default:
+ if (scrolling_mode) { // check if we were scrolling before and set disable if so
+ scrolling_mode = false;
+ pointing_device_set_cpi(8000);
+ }
+ break;
+ }
+ return state;
+}
+
+report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
+ if (scrolling_mode) {
+ mouse_report.h = mouse_report.x;
+ mouse_report.v = mouse_report.y;
+ mouse_report.x = 0;
+ mouse_report.y = 0;
+ }
+ return mouse_report;
+}
+```
+
+### Combined Pointing Devices
+
+The following example requires `POINTING_DEVICE_COMBINED` and sets the left side pointing device to scroll only.
+
+```c
+void keyboard_post_init_user(void) {
+ pointing_device_set_cpi_on_side(true, 1000); //Set cpi on left side to a low value for slower scrolling.
+ pointing_device_set_cpi_on_side(false, 8000); //Set cpi on right side to a reasonable value for mousing.
+}
+
+report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) {
+ left_report.h = left_report.x;
+ left_report.v = left_report.y;
+ left_report.x = 0;
+ left_report.y = 0;
+ return pointing_device_combine_reports(left_report, right_report);
+}
+```
+=======
diff --git a/feature_rgb_matrix.md b/feature_rgb_matrix.md
index 536609b39a..a021779d43 100644
--- a/feature_rgb_matrix.md
+++ b/feature_rgb_matrix.md
@@ -232,6 +232,115 @@ const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3737.pdf) and the header file `drivers/led/issi/is31fl3737.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0`, `1` for now).
+---
+### IS31FLCOMMON :id=is31flcommon
+
+There is basic support for addressable RGB matrix lighting with a selection of I2C ISSI Lumissil RGB controllers through a shared common driver. To enable it, add this to your `rules.mk`:
+
+```makefile
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER =
+```
+
+Where `` is the applicable LED driver chip as below
+
+| Driver Name | Data Sheet | Capability |
+|-------------|------------|------------|
+| `IS31FL3742A` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3742A_DS.pdf) | 60 RGB, 30x6 Matrix |
+| `ISSIFL3743A` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3743A_DS.pdf) | 66 RGB, 18x11 Matrix |
+| `IS31FL3745` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3745_DS.pdf) | 48 RGB, 18x8 Matrix |
+| `IS31FL3746A` | [datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3746A_DS.pdf) | 24 RGB, 18x4 Matrix |
+
+You can use between 1 and 4 IC's. Do not specify `DRIVER_ADDR_` define for IC's if not present on your keyboard. The `DRIVER_ADDR_1` default assumes that all Address pins on the controller have been connected to GND. Drivers that have SYNC functionality have the default settings to disable if 1 driver. If more than 1 drivers then `DRIVER_ADDR_1` will be set to Master and the remaining ones set to Slave.
+
+Configure the hardware via your `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `DRIVER_ADDR_1` | (Optional) Address for the first RGB driver | |
+| `DRIVER_ADDR_` | (Required) Address for the additional RGB drivers | |
+| `ISSI_SSR_` | (Optional) Configuration for the Spread Spectrum Register | |
+| `ISSI_CONFIGURATION` | (Optional) Configuration for the Configuration Register | |
+| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
+| `ISSI_PULLDOWNUP` | (Optional) Configuration for the Pull Up & Pull Down Register | |
+| `ISSI_TEMP` | (Optional) Configuration for the Tempature Register | |
+| `ISSI_PWM_ENABLE` | (Optional) Configuration for the PWM Enable Register | |
+| `ISSI_PWM_SET` | (Optional) Configuration for the PWM Setting Register | |
+| `ISSI_SCAL_RED` | (Optional) Configuration for the RED LEDs in Scaling Registers | 0xFF |
+| `ISSI_SCAL_BLUE` | (Optional) Configuration for the BLUE LEDs in Scaling Registers | 0xFF |
+| `ISSI_SCAL_GREEN` | (Optional) Configuration for the GREEN LEDs in Scaling Registers | 0xFF |
+| `ISSI_MANUAL_SCALING` | (Optional) If you wish to configure the Scaling Registers manually | |
+
+
+Defaults
+
+| Variable | IS31FL3742A | IS31FL3743A | IS31FL3745 | IS31FL3746 |
+|----------|-------------|-------------|------------|------------|
+| `DRIVER_ADDR_1` | 0b0110000 | 0b0100000 | 0b0100000 | 0b1100000 |
+| `ISSI_SSR_1` | 0x00 | 0x00 / 0x60 | 0x00 / 0xC0 | 0x00 |
+| `ISSI_SSR_<2-4>` | 0x00 | 0x40 | 0x80 | 0x00 |
+| `ISSI_CONFIGURATION` | 0x31 | 0x01 | 0x31 | 0x01 |
+| `ISSI_PULLDOWNUP` | 0x55 | 0x33 | 0x33 | 0x33 |
+| `ISSI_TEMP` | N/A | 0x00 | 0x00 | 0x00 |
+| `ISSI_PWM_ENABLE` | N/A | N/A | N/A | 0x00 |
+| `ISSI_PWM_SET` | 0x00 | N/A | N/A | 0x00 |
+
+Here is an example using 2 drivers.
+
+```c
+#define DRIVER_ADDR_2 0b0100001
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 66
+#define DRIVER_2_LED_TOTAL 42
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+```
+
+!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+
+Currently only 4 drivers are supported, but it would be trivial to support for more. Note that using a combination of different drivers is not supported. All drivers must be of the same model.
+
+Define these arrays listing all the LEDs in your `.c`:
+
+```c
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, CS1_SW1, CS2_SW1, CS3_SW1},
+ ....
+}
+```
+
+Where `CSx_SWx` is the location of the LED in the matrix defined by the datasheet. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` for now).
+
+`ISSI_MANUAL_SCALING` is used to override the Scaling for individual LED's. By default they will be set as per `ISSI_SCAL_`. In `config.h` set how many LED's you want to manually set scaling for.
+Eg `#define ISSI_MANUAL_SCALING 3`
+
+Then Define the array listing all the LEDs you want to override in your `.c`:
+
+```c
+const is31_led __flash g_is31_scaling[ISSI_MANUAL_SCALING] = {
+ * LED Index
+ * | R scaling
+ * | | G scaling
+ * | | | B scaling
+ * | | | | */
+ {5, 120, 155, 167},
+ {9, 120, 155, 167},
+ ....
+}
+```
+
+Where LED Index is the position of the LED in the `g_is31_leds` array. The `scaling` value between 0 and 255 to be written to the Scaling Register.
+
---
### WS2812 :id=ws2812
@@ -457,6 +566,7 @@ enum rgb_matrix_effects {
RGB_MATRIX_HUE_PENDULUM, // Hue shifts up a slight ammount in a wave to the right, then back to the left
RGB_MATRIX_HUE_WAVE, // Hue shifts up a slight ammount and then back down in a wave to the right
RGB_MATRIX_PIXEL_FRACTAL, // Single hue fractal filled keys pulsing horizontally out to edges
+ RGB_MATRIX_PIXEL_FLOW, // Pulsing RGB flow along LED wiring with random hues
RGB_MATRIX_PIXEL_RAIN, // Randomly light keys with random hues
#if define(RGB_MATRIX_FRAMEBUFFER_EFFECTS)
RGB_MATRIX_TYPING_HEATMAP, // How hot is your WPM!
@@ -512,6 +622,7 @@ You can enable a single effect by defining `ENABLE_[EFFECT_NAME]` in your `confi
|`#define ENABLE_RGB_MATRIX_HUE_PENDULUM` |Enables `RGB_MATRIX_HUE_PENDULUM` |
|`#define ENABLE_RGB_MATRIX_HUE_WAVE` |Enables `RGB_MATRIX_HUE_WAVE ` |
|`#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL` |Enables `RGB_MATRIX_PIXEL_FRACTAL` |
+|`#define ENABLE_RGB_MATRIX_PIXEL_FLOW` |Enables `RGB_MATRIX_PIXEL_FLOW` |
|`#define ENABLE_RGB_MATRIX_PIXEL_RAIN` |Enables `RGB_MATRIX_PIXEL_RAIN` |
?> These modes don't require any additional defines.
@@ -707,6 +818,7 @@ Where `28` is an unused index from `eeconfig.h`.
|`rgb_matrix_decrease_speed_noeeprom()` |Decrease the speed of the animations (not written to EEPROM) |
|`rgb_matrix_set_speed(speed)` |Set the speed of the animations to the given value where `speed` is between 0 and 255 |
|`rgb_matrix_set_speed_noeeprom(speed)` |Set the speed of the animations to the given value where `speed` is between 0 and 255 (not written to EEPROM) |
+|`rgb_matrix_reload_from_eeprom()` |Reload the effect configuration (enabled, mode and color) from EEPROM |
### Change Color :id=change-color
|Function |Description |
diff --git a/feature_split_keyboard.md b/feature_split_keyboard.md
index dbc7740f98..6ef70bf788 100644
--- a/feature_split_keyboard.md
+++ b/feature_split_keyboard.md
@@ -273,6 +273,14 @@ This enables transmitting the current OLED on/off status to the slave side of th
This enables transmitting the current ST7565 on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing.
+```c
+#define SPLIT_POINTING_ENABLE
+```
+
+This enables transmitting the pointing device status to the master side of the split keyboard. The purpose of this feature is to enable use pointing devices on the slave side.
+
+!> There is additional required configuration for `SPLIT_POINTING_ENABLE` outlined in the [pointing device documentation](feature_pointing_device.md?id=split-keyboard-configuration).
+
### Custom data sync between sides :id=custom-data-sync
QMK's split transport allows for arbitrary data transactions at both the keyboard and user levels. This is modelled on a remote procedure call, with the master invoking a function on the slave side, with the ability to send data from master to slave, process it slave side, and send data back from slave to master.
diff --git a/feature_wpm.md b/feature_wpm.md
index 87145c97e3..9f98ef8336 100644
--- a/feature_wpm.md
+++ b/feature_wpm.md
@@ -16,7 +16,7 @@ For split keyboards using soft serial, the computed WPM score will be available
| `WPM_ALLOW_COUNT_REGRESSION` | _Not defined_ | If defined allows the WPM to be decreased when hitting Delete or Backspace |
| `WPM_UNFILTERED` | _Not defined_ | If undefined (the default), WPM values will be smoothed to avoid sudden changes in value |
| `WPM_SAMPLE_SECONDS` | `5` | This defines how many seconds of typing to average, when calculating WPM |
-| `WPM_SAMPLE_PERIODS` | `50` | This defines how many sampling periods to use when calculating WPM |
+| `WPM_SAMPLE_PERIODS` | `25` | This defines how many sampling periods to use when calculating WPM |
| `WPM_LAUNCH_CONTROL` | _Not defined_ | If defined, WPM values will be calculated using partial buffers when typing begins |
'WPM_UNFILTERED' is potentially useful if you're filtering data in some other way (and also because it reduces the code required for the WPM feature), or if reducing measurement latency to a minimum is important for you.
diff --git a/flash_driver.md b/flash_driver.md
new file mode 100644
index 0000000000..fa7fed5171
--- /dev/null
+++ b/flash_driver.md
@@ -0,0 +1,24 @@
+# FLASH Driver Configuration :id=flash-driver-configuration
+
+The FLASH driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
+
+Driver | Description
+-----------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+`FLASH_DRIVER = spi` | Supports writing to almost all NOR Flash chips. See the driver section below.
+
+
+## SPI FLASH Driver Configuration :id=spi-flash-driver-configuration
+
+Currently QMK supports almost all NOR Flash chips over SPI. As such, requires a working spi_master driver configuration. You can override the driver configuration via your config.h:
+
+`config.h` override | Description | Default Value
+-----------------------------------------------|--------------------------------------------------------------------------------------|-----------------
+`#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN` | SPI Slave select pin in order to inform that the FLASH is currently being addressed | _none_
+`#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR` | Clock divisor used to divide the peripheral clock to derive the SPI frequency | `8`
+`#define EXTERNAL_FLASH_PAGE_SIZE` | The Page size of the FLASH in bytes, as specified in the datasheet | `256`
+`#define EXTERNAL_FLASH_SECTOR_SIZE` | The sector size of the FLASH in bytes, as specified in the datasheet | `(4 * 1024)`
+`#define EXTERNAL_FLASH_BLOCK_SIZE` | The block size of the FLASH in bytes, as specified in the datasheet | `(64 * 1024)`
+`#define EXTERNAL_FLASH_SIZE` | The total size of the FLASH in bytes, as specified in the datasheet | `(512 * 1024)`
+`#define EXTERNAL_FLASH_ADDRESS_SIZE` | The Flash address size in bytes, as specified in datasheet | `3`
+
+!> All the above default configurations are based on MX25L4006E NOR Flash.
diff --git a/hardware_avr.md b/hardware_avr.md
deleted file mode 100644
index 69aca2cf34..0000000000
--- a/hardware_avr.md
+++ /dev/null
@@ -1,182 +0,0 @@
-# Keyboards with AVR Processors
-
-This page describes the support for AVR processors in QMK. AVR processors include the atmega32u4, atmega32u2, at90usb1286, and other processors from Atmel Corporation. AVR processors are 8-bit MCUs that are designed to be easy to work with. The most common AVR processors in keyboards have on-board USB and plenty of GPIO for supporting large keyboard matrices. They are the most popular MCU for use in keyboards today.
-
-If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_guidelines.md) to get a sense of how keyboards fit into QMK.
-
-## Adding Your AVR Keyboard to QMK
-
-QMK has a number of features to simplify working with AVR keyboards. For most keyboards you don't have to write a single line of code. To get started, run `qmk new-keyboard`:
-
-```
-$ qmk new-keyboard
-Ψ Generating a new QMK keyboard directory
-
-Keyboard Name: mycoolkeeb
-Keyboard Type:
- 1. avr
- 2. ps2avrgb
-Please enter your choice: [1]
-Your Name: [John Smith]
-Ψ Copying base template files...
-Ψ Copying avr template files...
-Ψ Renaming keyboard.[ch] to mycoolkeeb.[ch]...
-Ψ Replacing %YEAR% with 2021...
-Ψ Replacing %KEYBOARD% with mycoolkeeb...
-Ψ Replacing %YOUR_NAME% with John Smith...
-
-Ψ Created a new keyboard called mycoolkeeb.
-Ψ To start working on things, `cd` into keyboards/mycoolkeeb,
-Ψ or open the directory in your preferred text editor.
-```
-
-This will create all the files needed to support your new keyboard, and populate the settings with default values. Now you just need to customize it for your keyboard.
-
-## `readme.md`
-
-This is where you'll describe your keyboard. Please follow the [Keyboard Readme Template](documentation_templates.md#keyboard-readmemd-template) when writing your `readme.md`. You're encouraged to place an image at the top of your `readme.md`, please use an external service such as [Imgur](https://imgur.com) to host the images.
-
-## `.c`
-
-This is where all the custom logic for your keyboard goes. Many keyboards do not need to put anything at all in here. You can learn more about writing custom logic in [Custom Quantum Functions](custom_quantum_functions.md).
-
-## `.h`
-
-This is the file you define your [Layout Macro(s)](feature_layouts.md) in. At minimum you should have a `#define LAYOUT` for your keyboard that looks something like this:
-
-```c
-#define LAYOUT( \
- k00, k01, k02, \
- k10, k11 \
-) { \
- { k00, k01, k02 }, \
- { k10, KC_NO, k11 }, \
-}
-```
-
-The first half of the `LAYOUT` pre-processor macro defines the physical arrangement of keys. The second half of the macro defines the matrix the switches are connected to. This allows you to have a physical arrangement of keys that differs from the wiring matrix.
-
-Each of the `k__` variables needs to be unique, and typically they follow the format `k`.
-
-The physical matrix (the second half) must have a number of rows equaling `MATRIX_ROWS`, and each row must have exactly `MATRIX_COLS` elements in it. If you do not have this many physical keys you can use `KC_NO` to fill in the blank spots.
-
-## `config.h`
-
-The `config.h` file is where you configure the hardware and feature set for your keyboard. There are a lot of options that can be placed in that file, too many to list there. For a complete overview of available options see the [Config Options](config_options.md) page.
-
-### Hardware Configuration
-
-
-At the top of the `config.h` you'll find USB related settings. These control how your keyboard appears to the Operating System. If you don't have a good reason to change you should leave the `VENDOR_ID` as `0xFEED`. For the `PRODUCT_ID` you should pick a number that is not yet in use.
-
-Do change the `MANUFACTURER` and `PRODUCT` lines to accurately reflect your keyboard.
-
-```c
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER You
-#define PRODUCT my_awesome_keyboard
-```
-
-?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead prefers the values in the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html). By default, it will only use `MANUFACTURER` and `PRODUCT` if the list does not contain that `VENDOR_ID` / `PRODUCT_ID`. `sudo lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
-
-### Keyboard Matrix Configuration
-
-The next section of the `config.h` file deals with your keyboard's matrix. The first thing you should set is the matrix's size. This is usually, but not always, the same number of rows and columns as the physical key arrangement.
-
-```c
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 3
-```
-
-Once you've defined the size of your matrix you need to define which pins on your MCU are connected to rows and columns. To do so simply specify the names of those pins:
-
-```c
-#define MATRIX_ROW_PINS { D0, D5 }
-#define MATRIX_COL_PINS { F1, F0, B0 }
-#define UNUSED_PINS
-```
-
-The number of `MATRIX_ROW_PINS` entries must be the same as the number you assigned to `MATRIX_ROWS`, and likewise for `MATRIX_COL_PINS` and `MATRIX_COLS`. You do not have to specify `UNUSED_PINS`, but you can if you want to document what pins are open.
-
-Finally, you can specify the direction your diodes point. This can be `COL2ROW` or `ROW2COL`.
-
-```c
-#define DIODE_DIRECTION COL2ROW
-```
-
-#### Direct Pin Matrix
-To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
-
-```c
-// #define MATRIX_ROW_PINS { D0, D5 }
-// #define MATRIX_COL_PINS { F1, F0, B0 }
-#define DIRECT_PINS { \
- { F1, E6, B0, B2, B3 }, \
- { F5, F0, B1, B7, D2 }, \
- { F6, F7, C7, D5, D3 }, \
- { B5, C6, B6, NO_PIN, NO_PIN } \
-}
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-//#define DIODE_DIRECTION
-```
-
-### Backlight Configuration
-
-QMK supports backlighting on most GPIO pins. A select few of these can be driven by the MCU in hardware. For more details see the [Backlight Documentation](feature_backlight.md).
-
-```c
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_BREATHING
-#define BREATHING_PERIOD 6
-```
-
-### Other Configuration Options
-
-There are a lot of features that can be configured or tuned in `config.h`. You should see the [Config Options](config_options.md) page for more details.
-
-## `rules.mk`
-
-You use the `rules.mk` file to tell QMK what files to build and what features to enable. If you are building around an atmega32u4 you can largely leave these defaults alone. If you are using another MCU you may have to tweak some parameters.
-
-### MCU Options
-
-These options tell the build system what CPU to build for. Be very careful if you change any of these settings, you can render your keyboard inoperable.
-
-```make
-MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-```
-
-### Bootloaders
-
-The bootloader is a special section of your MCU that allows you to upgrade the code stored on the MCU. Think of it like a Rescue Partition for your keyboard.
-
-#### Teensy Bootloader Example
-
-```make
-BOOTLOADER = halfkay
-```
-
-#### Atmel DFU Loader Example
-
-```make
-BOOTLOADER = atmel-dfu
-```
-
-#### Pro Micro Bootloader Example
-
-```make
-BOOTLOADER = caterina
-```
-
-### Build Options
-
-There are a number of features that can be turned on or off in `rules.mk`. See the [Config Options](config_options.md#feature-options) page for a detailed list and description.
diff --git a/index.html b/index.html
index f5a8dbbf12..e24b25e73a 100644
--- a/index.html
+++ b/index.html
@@ -39,7 +39,6 @@
'/glossary': '/reference_glossary',
'/key_lock': '/feature_key_lock',
'/make_instructions': '/getting_started_make_guide',
- '/porting_your_keyboard_to_qmk': '/hardware_avr',
'/space_cadet_shift': '/feature_space_cadet_shift',
'/getting_started_getting_help': '/support',
'/tap_dance': '/feature_tap_dance',
diff --git a/internals_gpio_control.md b/internals_gpio_control.md
index ccd3f8c74d..e1f1515b71 100644
--- a/internals_gpio_control.md
+++ b/internals_gpio_control.md
@@ -6,17 +6,19 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
The following functions provide basic control of GPIOs and are found in `platforms//gpio.h`.
-|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples |
-|------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------|
-| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
-| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
-| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
-| `setPinOutput(pin)` | Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
-| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
-| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
-| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
-| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
-| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` |
+| Function | Description | Old AVR Examples | Old ChibiOS/ARM Examples |
+|------------------------------|-----------------------------------------------------|-------------------------------------------------|--------------------------------------------------|
+| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
+| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
+| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
+| `setPinOutput(pin)` | Set pin as output (alias of `setPinOutputPushPull`) | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+| `setPinOutputPushPull(pin)` | Set pin as output, push/pull mode | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+| `setPinOutputOpenDrain(pin)` | Set pin as output, open-drain mode | N/A (Not implemented on AVR) | `palSetLineMode(pin, PAL_MODE_OUTPUT_OPENDRAIN)` |
+| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
+| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
+| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
+| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
+| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` |
## Advanced Settings :id=advanced-settings
diff --git a/keycodes.md b/keycodes.md
index 84a6d456ba..58ce43d309 100644
--- a/keycodes.md
+++ b/keycodes.md
@@ -219,11 +219,11 @@ See also: [Basic Keycodes](keycodes_basic.md)
See also: [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
-|Key |Aliases |Description |
-|--------------|---------|-------------------------------------------------------|
-|`RESET` | |Put the keyboard into bootloader mode for flashing |
-|`DEBUG` | |Toggle debug mode |
-|`EEPROM_RESET`|`EEP_RST`|Reinitializes the keyboard's EEPROM (persistent memory)|
+|Key |Aliases |Description |
+|-----------------|---------|-------------------------------------------------------|
+|`QK_BOOTLOADER` |`QK_BOOT`|Put the keyboard into bootloader mode for flashing |
+|`QK_DEBUG_TOGGLE`|`DB_TOGG`|Toggle debug mode |
+|`QK_CLEAR_EEPROM`|`EE_CLR` |Reinitializes the keyboard's EEPROM (persistent memory)|
## Audio Keys :id=audio-keys
@@ -283,9 +283,9 @@ See also: [Dynamic Macros](feature_dynamic_macros.md)
See also: [Grave Escape](feature_grave_esc.md)
-|Key |Aliases |Description |
-|-----------|---------|------------------------------------------------------------------|
-|`GRAVE_ESC`|`KC_GESC`|Escape when pressed, ` when Shift or GUI are held|
+|Key |Aliases |Description |
+|-----------------|---------|------------------------------------------------------------------|
+|`QK_GRAVE_ESCAPE`|`QK_GESC`|Escape when pressed, ` when Shift or GUI are held|
## Key Lock :id=key-lock
@@ -326,6 +326,7 @@ See also: [Magic Keycodes](keycodes_magic.md)
|----------------------------------|---------|--------------------------------------------------------------------------|
|`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control |
|`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control |
+|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap |
|`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control |
|`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control |
|`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI |
diff --git a/keycodes_magic.md b/keycodes_magic.md
index 7e1b1a4f62..01eb69168e 100644
--- a/keycodes_magic.md
+++ b/keycodes_magic.md
@@ -6,6 +6,7 @@
|----------------------------------|---------|--------------------------------------------------------------------------|
|`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control |
|`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control |
+|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap |
|`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control |
|`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control |
|`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI |
diff --git a/keymap.md b/keymap.md
index bec781e684..a7c9c50d74 100644
--- a/keymap.md
+++ b/keymap.md
@@ -136,7 +136,7 @@ After this you'll find a list of LAYOUT() macros. A LAYOUT() is simply a list of
`keymaps[][MATRIX_ROWS][MATRIX_COLS]` in QMK holds the 16 bit action code (sometimes referred as the quantum keycode) in it. For the keycode representing typical keys, its high byte is 0 and its low byte is the USB HID usage ID for keyboard.
-> TMK from which QMK was forked uses `const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS]` instead and holds the 8 bit keycode. Some keycode values are reserved to induce execution of certain action codes via the `fn_actions[]` array.
+> TMK from which QMK was forked uses `const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS]` instead and holds the 8 bit keycode.
#### Base Layer
diff --git a/platformdev_chibios_earlyinit.md b/platformdev_chibios_earlyinit.md
index eb932bc774..aaa91ba438 100644
--- a/platformdev_chibios_earlyinit.md
+++ b/platformdev_chibios_earlyinit.md
@@ -17,7 +17,6 @@ As such, if you wish to override this API consider limiting use to writing to lo
| `config.h` override | Description | Default |
|-----------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------|
| `#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP` | Whether or not bootloader is to be executed during the early initialisation code of QMK. | `FALSE` |
-| `#define STM32_BOOTLOADER_ADDRESS` | Relevant for single-bank STM32 MCUs, signifies the memory address to jump to bootloader. Consult [AN2606](https://www.st.com/content/st_com/en/search.html#q=an2606-t=resources-page=1) for the _System Memory_ address for your MCU. This value should be of the format `0x11111111`. | `` |
| `#define STM32_BOOTLOADER_DUAL_BANK` | Relevant for dual-bank STM32 MCUs, signifies that a GPIO is to be toggled in order to enter bootloader mode. | `FALSE` |
| `#define STM32_BOOTLOADER_DUAL_BANK_GPIO` | Relevant for dual-bank STM32 MCUs, the pin to toggle when attempting to enter bootloader mode, e.g. `B8` | `` |
| `#define STM32_BOOTLOADER_DUAL_BANK_POLARITY` | Relevant for dual-bank STM32 MCUs, the value to set the pin to in order to trigger charging of the RC circuit. e.g. `0` or `1`. | `0` |
diff --git a/porting_your_keyboard_to_qmk.md b/porting_your_keyboard_to_qmk.md
new file mode 100644
index 0000000000..484d079ea6
--- /dev/null
+++ b/porting_your_keyboard_to_qmk.md
@@ -0,0 +1,163 @@
+# Adding Your Keyboard to QMK
+
+This page describes the support for [Compatible Microcontrollers](compatible_microcontrollers.md) in QMK.
+
+If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_guidelines.md) to get a sense of how keyboards fit into QMK.
+
+
+QMK has a number of features to simplify working with keyboards. For most, you don't have to write a single line of code. To get started, run `qmk new-keyboard`:
+
+```
+$ qmk new-keyboard
+Ψ Generating a new QMK keyboard directory
+
+Name Your Keyboard Project
+For more infomation, see:
+https://docs.qmk.fm/#/hardware_keyboard_guidelines?id=naming-your-keyboardproject
+
+keyboard Name? mycoolkeeb
+
+Attribution
+Used for maintainer, copyright, etc
+
+Your GitHub Username? [jsmith]
+
+More Attribution
+Used for maintainer, copyright, etc
+
+Your Real Name? [John Smith]
+
+Pick Base Layout
+As a starting point, one of the common layouts can be used to bootstrap the process
+
+Default Layout?
+ 1. 60_ansi
+...
+ 50. tkl_iso
+ 51. none of the above
+Please enter your choice: [51]
+
+What Powers Your Project
+For more infomation, see:
+https://docs.qmk.fm/#/compatible_microcontrollers
+
+MCU?
+ 1. atmega32u4
+...
+ 22. STM32F303
+Please enter your choice: [12]
+Ψ Created a new keyboard called mycoolkeeb.
+Ψ To start working on things, `cd` into keyboards/mycoolkeeb,
+Ψ or open the directory in your preferred text editor.
+Ψ And build with qmk compile -kb mycoolkeeb -km default.
+```
+
+This will create all the files needed to support your new keyboard, and populate the settings with default values. Now you just need to customize it for your keyboard.
+
+## `readme.md`
+
+This is where you'll describe your keyboard. Please follow the [Keyboard Readme Template](documentation_templates.md#keyboard-readmemd-template) when writing your `readme.md`. You're encouraged to place an image at the top of your `readme.md`, please use an external service such as [Imgur](https://imgur.com) to host the images.
+
+## `info.json`
+
+The `info.json` file is where you configure the hardware and feature set for your keyboard. There are a lot of options that can be placed in that file, too many to list here. For a complete overview of available options see the [Data Driven Configuration Options](reference_info_json.md) page.
+
+### Hardware Configuration
+
+At the top of the `info.json` you'll find USB related settings. These control how your keyboard appears to the Operating System. If you don't have a good reason to change you should leave the `usb.vid` as `0xFEED`. For the `usb.pid` you should pick a number that is not yet in use.
+
+Do change the `manufacturer` and `keyboard_name` lines to accurately reflect your keyboard.
+
+```json
+ "keyboard_name": "my_awesome_keyboard",
+ "maintainer": "You",
+ "usb": {
+ "vid": "0xFEED",
+ "pid": "0x0000",
+ "device_version": "1.0.0"
+ },
+```
+
+?> Windows and macOS will display the `manufacturer` and `keyboard_name` in the list of USB devices. `lsusb` on Linux instead prefers the values in the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html). By default, it will only use `manufacturer` and `keyboard_name` if the list does not contain that `usb.vid` / `usb.pid`. `sudo lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
+
+
+### Matrix Configuration
+
+The next section of the `info` file deals with your keyboard's matrix. The first thing you should define is which pins on your MCU are connected to rows and columns. To do so simply specify the names of those pins:
+
+```json
+ "matrix_pins": {
+ "cols": ["C1", "C2", "C3", "C4"],
+ "rows": ["D1", "D2", "D3", "D4"]
+ },
+```
+
+The size of the `matrix_pins.cols` and `matrix_pins.rows` arrays infer the size of the matrix (previously `MATRIX_ROWS` and `MATRIX_COLS`).
+
+Finally, you can specify the direction your diodes point. This can be `COL2ROW` or `ROW2COL`.
+
+```json
+ "diode_direction": "ROW2COL",
+```
+
+#### Direct Pin Matrix
+To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `matrix_pins.direct`. The mapping defines the pins of each switch in rows and columns, from left to right. The size of the `matrix_pins.direct` array infers the size of the matrix. Use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `diode_direction`, `matrix_pins.cols` and `matrix_pins.rows`.
+
+```json
+ "matrix_pins": {
+ "direct": [
+ ["F1", "E6", "B0", "B2", "B3" ],
+ ["F5", "F0", "B1", "B7", "D2" ],
+ ["F6", "F7", "C7", "D5", "D3" ],
+ ["B5", "C6", "B6", "NO_PIN", "NO_PIN"]
+ ]
+ },
+```
+
+### Layout macros
+
+Next is configuring Layout Macro(s). These define the physical arrangement of keys, and its position within the matrix that a switch are connected to. This allows you to have a physical arrangement of keys that differs from the wiring matrix.
+
+```json
+ "layouts": {
+ "LAYOUT_ortho_4x4": {
+ "layout": [
+ { "matrix": [0, 0], "x": 0, "y": 0 },
+ { "matrix": [0, 1], "x": 1, "y": 0 },
+ { "matrix": [0, 2], "x": 2, "y": 0 },
+ { "matrix": [0, 3], "x": 3, "y": 0 },
+ { "matrix": [1, 0], "x": 0, "y": 1 },
+ { "matrix": [1, 1], "x": 1, "y": 1 },
+ { "matrix": [1, 2], "x": 2, "y": 1 },
+ { "matrix": [1, 3], "x": 3, "y": 1 },
+ { "matrix": [2, 0], "x": 0, "y": 2 },
+ { "matrix": [2, 1], "x": 1, "y": 2 },
+ { "matrix": [2, 2], "x": 2, "y": 2 },
+ { "matrix": [2, 3], "x": 3, "y": 2 },
+ { "matrix": [3, 0], "x": 0, "y": 3 },
+ { "matrix": [3, 1], "x": 1, "y": 3 },
+ { "matrix": [3, 2], "x": 2, "y": 3 },
+ { "matrix": [3, 3], "x": 3, "y": 3 }
+ ]
+ }
+ }
+
+```
+
+In the above example,
+
+* `LAYOUT_ortho_4x4` defines the name of the layout macro
+ * It must conform to [hardware_keyboard_guidelines.md#ltkeyboard_namehgt]
+* `"matrix": [0, 0]` defines the electrical position
+
+## Additional Configuration
+
+There are a lot of features that can be turned on or off, configured or tuned. Some of these have yet to be migrated over to [Data Driven Configuration](data_driven_config.md). The following sections cover the process for when an `info.json` option is unavailable.
+
+### Configuration Options
+
+For available options for `config.h`, you should see the [Config Options](config_options.md) page for more details.
+
+### Build Options
+
+For available options for `rules.mk`, see the [Config Options](config_options.md#feature-options) page for a detailed list and description.
diff --git a/quantum_keycodes.md b/quantum_keycodes.md
index 7ebad2c1ee..8e29e05886 100644
--- a/quantum_keycodes.md
+++ b/quantum_keycodes.md
@@ -8,8 +8,8 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
## QMK Keycodes :id=qmk-keycodes
-|Key |Aliases |Description |
-|--------------|---------|-------------------------------------------------------|
-|`RESET` | |Put the keyboard into bootloader mode for flashing |
-|`DEBUG` | |Toggle debug mode |
-|`EEPROM_RESET`|`EEP_RST`|Reinitializes the keyboard's EEPROM (persistent memory)|
+|Key |Aliases |Description |
+|-----------------|---------|-------------------------------------------------------|
+|`QK_BOOTLOADER` |`QK_BOOT`|Put the keyboard into bootloader mode for flashing |
+|`QK_DEBUG_TOGGLE`|`DB_TOGG`|Toggle debug mode |
+|`QK_CLEAR_EEPROM`|`EE_CLR` |Reinitializes the keyboard's EEPROM (persistent memory)|
diff --git a/reference_info_json.md b/reference_info_json.md
index b2e6cae28e..3cc807c179 100644
--- a/reference_info_json.md
+++ b/reference_info_json.md
@@ -172,7 +172,7 @@ The following animations can be enabled:
### USB
-Every USB keyboard needs to have its USB parmaters defined. At a minimum you need to set vid, pid, and device version.
+Every USB keyboard needs to have its USB parameters defined. At a minimum you need to set the Vendor ID, Product ID, and device version.
Example:
@@ -181,7 +181,9 @@ Example:
"usb": {
"vid": "0xC1ED",
"pid": "0x23B0",
- "device_ver": "0x0001"
+ "device_version": "1.0.0"
}
}
```
+
+The device version is a BCD (binary coded decimal) value, in the format `MMmr`, so the below value would look like `0x0100` in the generated code. This also means the maximum valid values for each part are `99.9.9`, despite it being a hexadecimal value under the hood.
diff --git a/squeezing_avr.md b/squeezing_avr.md
index e4d8d7c146..4a147e0c66 100644
--- a/squeezing_avr.md
+++ b/squeezing_avr.md
@@ -147,6 +147,7 @@ For RGB Matrix, these need to be explicitly enabled as well. To disable any that
#undef ENABLE_RGB_MATRIX_HUE_PENDULUM
#undef ENABLE_RGB_MATRIX_HUE_WAVE
#undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+#undef ENABLE_RGB_MATRIX_PIXEL_FLOW
#undef ENABLE_RGB_MATRIX_PIXEL_RAIN
#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP