Duplicate board files for blok converter (#20629)

* Duplicate board files for blok converter

* Swap converters board file too

* Update platforms/chibios/boards/QMK_BLOK/configs/board.h
This commit is contained in:
Joel Challis 2023-05-22 07:04:19 +01:00 committed by GitHub
parent fb056c5437
commit 3969d7045e
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
8 changed files with 179 additions and 2 deletions

View file

@ -33,7 +33,7 @@
"blok": {
"processor": "RP2040",
"bootloader": "rp2040",
"board": "QMK_PM2040"
"board": "QMK_BLOK"
},
"michi": {
"processor": "RP2040",

View file

@ -0,0 +1,9 @@
# List of all the board related files.
BOARDSRC = $(CHIBIOS)/os/hal/boards/RP_PICO_RP2040/board.c
# Required include directories
BOARDINC = $(CHIBIOS)/os/hal/boards/RP_PICO_RP2040
# Shared variables
ALLCSRC += $(BOARDSRC)
ALLINC += $(BOARDINC)

View file

@ -0,0 +1,12 @@
// Copyright 2022 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include_next <board.h>
#undef BOARD_RP_PICO_RP2040
#define BOARD_PM2040
#undef BOARD_NAME
#define BOARD_NAME "Blok"

View file

@ -0,0 +1,13 @@
// Copyright 2022 Stefan Kerkmann
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define CH_CFG_SMP_MODE TRUE
#define CH_CFG_ST_RESOLUTION 32
#define CH_CFG_ST_FREQUENCY 1000000
#define CH_CFG_INTERVALS_SIZE 32
#define CH_CFG_TIME_TYPES_SIZE 32
#define CH_CFG_ST_TIMEDELTA 20
#include_next <chconf.h>

View file

@ -0,0 +1,21 @@
// Copyright 2022 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifndef I2C_DRIVER
# define I2C_DRIVER I2CD0
#endif
#ifndef I2C1_SDA_PIN
# define I2C1_SDA_PIN D1
#endif
#ifndef I2C1_SCL_PIN
# define I2C1_SCL_PIN D0
#endif
#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET
# define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
#endif
#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT
# define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U
#endif

View file

@ -0,0 +1,10 @@
// Copyright 2022 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define HAL_USE_ADC TRUE
#define HAL_USE_I2C TRUE
#define HAL_USE_SPI TRUE
#include_next <halconf.h>

View file

@ -0,0 +1,112 @@
/*
ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef MCUCONF_H
#define MCUCONF_H
/*
* RP2040_MCUCONF drivers configuration.
*
* IRQ priorities:
* 3...0 Lowest...Highest.
*
* DMA priorities:
* 0...1 Lowest...Highest.
*/
#define RP2040_MCUCONF
/*
* HAL driver system settings.
*/
#define RP_NO_INIT FALSE
#define RP_CORE1_START FALSE
#define RP_CORE1_VECTORS_TABLE _vectors
#define RP_CORE1_ENTRY_POINT _crt0_c1_entry
#define RP_CORE1_STACK_END __c1_main_stack_end__
/*
* IRQ system settings.
*/
#define RP_IRQ_SYSTICK_PRIORITY 2
#define RP_IRQ_TIMER_ALARM0_PRIORITY 2
#define RP_IRQ_TIMER_ALARM1_PRIORITY 2
#define RP_IRQ_TIMER_ALARM2_PRIORITY 2
#define RP_IRQ_TIMER_ALARM3_PRIORITY 2
#define RP_IRQ_ADC1_PRIORITY 3
#define RP_IRQ_UART0_PRIORITY 3
#define RP_IRQ_UART1_PRIORITY 3
#define RP_IRQ_SPI0_PRIORITY 2
#define RP_IRQ_SPI1_PRIORITY 2
#define RP_IRQ_USB0_PRIORITY 3
#define RP_IRQ_I2C0_PRIORITY 2
#define RP_IRQ_I2C1_PRIORITY 2
/*
* ADC driver system settings.
*/
#define RP_ADC_USE_ADC1 TRUE
/*
* SIO driver system settings.
*/
#define RP_SIO_USE_UART0 FALSE
#define RP_SIO_USE_UART1 FALSE
/*
* SPI driver system settings.
*/
#define RP_SPI_USE_SPI0 TRUE
#define RP_SPI_USE_SPI1 FALSE
#define RP_SPI_SPI0_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY
#define RP_SPI_SPI0_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY
#define RP_SPI_SPI1_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY
#define RP_SPI_SPI1_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY
#define RP_SPI_SPI0_DMA_PRIORITY 1
#define RP_SPI_SPI1_DMA_PRIORITY 1
#define RP_SPI_DMA_ERROR_HOOK(spip)
/*
* PWM driver system settings.
*/
#define RP_PWM_USE_PWM0 FALSE
#define RP_PWM_USE_PWM1 FALSE
#define RP_PWM_USE_PWM2 FALSE
#define RP_PWM_USE_PWM3 FALSE
#define RP_PWM_USE_PWM4 FALSE
#define RP_PWM_USE_PWM5 FALSE
#define RP_PWM_USE_PWM6 FALSE
#define RP_PWM_USE_PWM7 FALSE
#define RP_PWM_IRQ_WRAP_NUMBER_PRIORITY 3
/*
* I2C driver system settings.
*/
#define RP_I2C_USE_I2C0 TRUE
#define RP_I2C_USE_I2C1 FALSE
#define RP_I2C_BUSY_TIMEOUT 50
#define RP_I2C_ADDRESS_MODE_10BIT FALSE
/*
* USB driver system settings.
*/
#define RP_USB_USE_USBD0 TRUE
#define RP_USB_FORCE_VBUS_DETECT TRUE
#define RP_USE_EXTERNAL_VBUS_DETECT FALSE
#define RP_USB_USE_SOF_INTR TRUE
#define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE
#endif /* MCUCONF_H */

View file

@ -1,6 +1,6 @@
# Boardsource Blok MCU settings for converting AVR projects
MCU := RP2040
BOARD := QMK_PM2040
BOARD := QMK_BLOK
BOOTLOADER := rp2040
# These are defaults based on what has been implemented for RP2040 boards