diff --git a/doc/BUILD_GUIDE.md b/doc/BUILD_GUIDE.md index 1750191836..78cf00b917 100644 --- a/doc/BUILD_GUIDE.md +++ b/doc/BUILD_GUIDE.md @@ -96,7 +96,7 @@ The keyboard `config.h` is included only if the keymap one doesn't exist. The fo ``` #undef MY_SETTING #define MY_SETTING 4 -```c +``` For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it. diff --git a/keyboards/atomic/keymaps/twolayer.c b/keyboards/atomic/keymaps/twolayer.c new file mode 100644 index 0000000000..8ea045d806 --- /dev/null +++ b/keyboards/atomic/keymaps/twolayer.c @@ -0,0 +1,72 @@ +#include "atomic.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | LCTRL1 | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 6.25u ---------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LALT | FN | XXXXXX . SPACE | RCTRL | RALT | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [0] = { /* QWERTY */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_ALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RCTL, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + + +/* FUNCTION + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | GRV | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | SCR LK | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | PAUSE | PR SCR | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT | VOL+ | VOL- | PLAY | | XXXXXX . | WHEEL+ | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | NUM LK | | | | | | | | INSERT | END1 | HOME | XXXXXX . | MOUS U | WHEEL- | + * |--------+--------+--------+--------+--------+- 6.25 ------------+--------+--------+------+--------+-----------------+--------+--------| + * | | | FN | XXXXXX . MS BT1 | | | FN | MOUS L | MOUS D | MOUS R | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [1] = { /* FUNCTION LAYER*/ + { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, + { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, + { KC_NLCK, _______, _______, _______, _______, _______, _______, _______, KC_INSERT, KC_END, KC_HOME, ___T___, ___T___, KC_MS_U, KC_WH_D }, + { _______, _______, MO(1), _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, MO(1), KC_MS_L, KC_MS_D, KC_MS_R }, + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), + [2] = ACTION_LAYER_MOMENTARY(1), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index e4f95c302c..a3347de45e 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -49,6 +49,9 @@ along with this program. If not, see . #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 +/* fix space cadet rollover issue */ +#define DISABLE_SPACE_CADET_ROLLOVER + // #define RGB_MIDI #define RGBW_BB_TWI diff --git a/keyboards/gh60/keymaps/dbroqua_7U/Makefile b/keyboards/gh60/keymaps/dbroqua_7U/Makefile new file mode 100644 index 0000000000..da0f07d7d0 --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua_7U/Makefile @@ -0,0 +1,111 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c new file mode 100644 index 0000000000..bebfe5af5d --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c @@ -0,0 +1,88 @@ +#include "gh60.h" +#include "action_layer.h" + +#define _DEFAULT 0 +#define _FN 1 + +int esc_led = 0; + +// Fillers to make layering more clear +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ + ______, KC_LGUI, KC_LALT, KC_SPC, ______, KC_RALT, KC_RGUI, ______ \ + ), + +/* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | Led | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = KEYMAP_HHKB( /* Layer 1 */ + F(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \ + ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \ + ______, ______, ______, ______, ______, KC_MSTP, ______, ______ \ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; + +enum function_id { + LED_TOGGLE +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(LED_TOGGLE) +}; + +void esc_led_toggle(void) { + if (esc_led == 0){ + esc_led = 1; + gh60_esc_led_on(); + } else { + esc_led = 0; + gh60_esc_led_off(); + } +} + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case LED_TOGGLE: + if (record->event.pressed) { + esc_led_toggle(); + } + break; + } +} \ No newline at end of file diff --git a/keyboards/handwired/kbod/Makefile b/keyboards/handwired/kbod/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/handwired/kbod/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h new file mode 100644 index 0000000000..f3d0c8bf2d --- /dev/null +++ b/keyboards/handwired/kbod/config.h @@ -0,0 +1,167 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER fudanchii +#define PRODUCT kbod +#define DESCRIPTION Keyboard of Disapproval + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 } +#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define PREVENT_STUCK_MODIFIERS + +#undef TAPPING_TOGGLE +#define TAPPING_TOGGLE 2 + +#endif diff --git a/keyboards/handwired/kbod/kbod.c b/keyboards/handwired/kbod/kbod.c new file mode 100644 index 0000000000..9a12cae0d2 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.c @@ -0,0 +1,28 @@ +#include "kbod.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/handwired/kbod/kbod.h b/keyboards/handwired/kbod/kbod.h new file mode 100644 index 0000000000..3560636242 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.h @@ -0,0 +1,21 @@ +#ifndef KBOD_H +#define KBOD_H + +#include "quantum.h" + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \ + k40, k41, k42, k43, k44, k45, k46, k47 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, { k08, k09, k0A, k0B, k0C, k0D, KC_NO, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, { k18, k19, k1A, k1B, k1C, k1D, KC_NO, k3B }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, { k28, k29, k2A, k2B, k2C, k38, k39, k3A }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47 }, \ +} + +#endif diff --git a/keyboards/handwired/kbod/keymaps/default/Makefile b/keyboards/handwired/kbod/keymaps/default/Makefile new file mode 100644 index 0000000000..0d9def930c --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/config.h b/keyboards/handwired/kbod/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c new file mode 100644 index 0000000000..1386b742f5 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -0,0 +1,104 @@ +#include "kbod.h" + +#define _____ KC_TRNS + +#define MODS_PRESSED(btn) (get_mods() & (MOD_BIT(KC_L##btn)|MOD_BIT(KC_R##btn))) + +#define SET_WHETHER(mask, btn1, btn2) \ +if (record->event.pressed) { \ + if (mask) { \ + add_key(btn2); \ + send_keyboard_report(); \ + } else { \ + add_key(btn1); \ + send_keyboard_report(); \ + } \ +} else { \ + if (mask) { \ + del_key(btn2); \ + send_keyboard_report(); \ + } else { \ + del_key(btn1); \ + send_keyboard_report(); \ + } \ +} \ + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP( /* Base */ + F(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, + TT(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), + KEYMAP( /* Cursor layer */ + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + TT(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, + TT(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____, + _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP, + _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT + ), + KEYMAP( /* Keypad layer */ + TO(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_BSPC, + _____, _____, _____, _____, _____, _____, _____, KC_P4, KC_P5, KC_P6, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P1, KC_P2, KC_P3, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P0, KC_PDOT, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, + _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 + ), + KEYMAP( /* Multimedia layer */ + TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____, + _____, _____, KC_WAKE, _____, _____, _____, _____, _____, _____, _____, KC_MSTP, KC_MPRV, KC_MNXT, _____, + _____, _____, KC_SLEP, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, KC_PWR, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2, + _____, _____, _____, KC_MPLY, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), + [1] = ACTION_FUNCTION(1), +}; + + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_mask; + static uint8_t alt_mask; + switch (id) { + case 0: + shift_esc_mask = MODS_PRESSED(SHIFT); + SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE); + break; + case 1: + alt_mask = MODS_PRESSED(ALT); + SET_WHETHER(alt_mask, KC_4, KC_F4); + break; + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & _BV(USB_LED_CAPS_LOCK)) { + PORTB |= _BV(PB0); + } else { + PORTB &= ~_BV(PB0); + } +} + +void matrix_init_user(void) { + DDRB |= _BV(PB0); + DDRC |= _BV(PC7); +} + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + if (layer) { + PORTC |= _BV(PC7); + } else { + PORTC &= ~_BV(PC7); + } +} \ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/readme.md b/keyboards/handwired/kbod/keymaps/default/readme.md new file mode 100644 index 0000000000..35c22ec007 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The default keymap for kbod + +This is the default keymap for kbod, + +it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers. \ No newline at end of file diff --git a/keyboards/handwired/kbod/readme.md b/keyboards/handwired/kbod/readme.md new file mode 100644 index 0000000000..67bf711bee --- /dev/null +++ b/keyboards/handwired/kbod/readme.md @@ -0,0 +1,21 @@ +KBOD keyboard firmware +====================== + +KBOD is a 60% Keyboard kit, hand-wired, with Arduino Micro as its controller. It's utilize 8x8 matrix and has layout similar to GH-60 + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and use ```make handwired-kbod-default``` to generate the .hex file. You may flash it with avrdude + +## Flashing +Something along this line: + +``` +avrdude -p m32u4 -c avr109 -P -C -e -u flash:w:handwired_kbod_default.hex +``` + +[More info](https://github.com/fudanchii/keyboard_of_disapproval) \ No newline at end of file diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk new file mode 100644 index 0000000000..4fcd147a9a --- /dev/null +++ b/keyboards/handwired/kbod/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h index 353ea368c6..8389ba111d 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/config.h +++ b/keyboards/lets_split/keymaps/OLED_sample/config.h @@ -27,19 +27,16 @@ along with this program. If not, see . #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif + #undef RGBLED_NUM #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 6 #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 - - - - -#ifdef SUBPROJECT_rev1 - #include "../../rev1/config.h" -#endif -#ifdef SUBPROJECT_rev2 - #include "../../rev2/config.h" -#endif \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c index 072b825abe..493ebcd3f2 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c +++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c @@ -6,6 +6,9 @@ #ifdef AUDIO_ENABLE #include "audio.h" #endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif extern keymap_config_t keymap_config; diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h index 9c8c6d7f40..e315d8c0c3 100644 --- a/keyboards/lets_split/keymaps/hexwire/config.h +++ b/keyboards/lets_split/keymaps/hexwire/config.h @@ -20,51 +20,16 @@ along with this program. If not, see . #define TAPPING_TERM 150 +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif + #undef RGBLED_NUM #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - -#ifdef SUBPROJECT_rev1 - #include "../../rev1/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } -#endif -#ifdef SUBPROJECT_rev2 - #include "../../rev2/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ - k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ - k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ - k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "../../rev2fliphalf/config.h" -#endif diff --git a/keyboards/lets_split/keymaps/hexwire/keymap.c b/keyboards/lets_split/keymaps/hexwire/keymap.c index f8370490d6..fcf3cde758 100644 --- a/keyboards/lets_split/keymaps/hexwire/keymap.c +++ b/keyboards/lets_split/keymaps/hexwire/keymap.c @@ -39,7 +39,7 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = COMPACT_KEYMAP( + [_QWERTY] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_COLEMAK] = COMPACT_KEYMAP( + [_COLEMAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_DVORAK] = COMPACT_KEYMAP( + [_DVORAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_LOWER] = COMPACT_KEYMAP( + [_LOWER] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -87,7 +87,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_RAISE] = COMPACT_KEYMAP( + [_RAISE] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_FN3] = COMPACT_KEYMAP( + [_FN3] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 , //|----+----+----+----+----+----| |----+----+----+----+----+----| diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h index 0de308c7a9..1892bf2cbd 100644 --- a/keyboards/lets_split/lets_split.h +++ b/keyboards/lets_split/lets_split.h @@ -11,6 +11,20 @@ #include "rev2fliphalf.h" #endif +// Used to create a keymap using only KC_ prefixed keys +#define KC_KEYMAP( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + KEYMAP( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + #include "quantum.h" #endif \ No newline at end of file diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index ecce3f4152..7e5a546022 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -7,6 +7,12 @@ Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards. +## Build Guide + +A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) + +There is additional information there about flashing and adding RGB underglow. + ## First Time Setup Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using: @@ -62,8 +68,7 @@ Apart from diodes and key switches for the keyboard matrix in each half, you will need: * 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. -* 2 TRS sockets -* 1 TRS cable. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a @@ -77,7 +82,7 @@ A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and t Wiring ------ -The 3 wires of the TRS cable need to connect GND, VCC, and digital pin 3 (i.e. +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros. Then wire your key matrix to any of the remaining 17 IO pins of the pro micro diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h index 4667c9fb09..6bf9f0f038 100644 --- a/keyboards/lets_split/rev1/rev1.h +++ b/keyboards/lets_split/rev1/rev1.h @@ -9,20 +9,20 @@ //void promicro_bootloader_jmp(bool program); #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45 }, \ - { k50, k51, k52, k53, k54, k55 }, \ - { k60, k61, k62, k63, k64, k65 }, \ - { k70, k71, k72, k73, k74, k75 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif \ No newline at end of file diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c index 8bfa171d01..20a4c6be1e 100644 --- a/keyboards/lets_split/rev2/rev2.c +++ b/keyboards/lets_split/rev2/rev2.c @@ -37,4 +37,3 @@ void shutdown_user(void) { stop_all_notes(); #endif } - diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index 054731366e..0c4e8e7de1 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -10,62 +10,51 @@ #ifdef USE_I2C #include #ifdef __AVR__ -#include -#include -#endif -#ifdef SSD1306OLED -extern bool iota_gfx_init(void); -extern void iota_gfx_task(void); -extern bool iota_gfx_off(void); -extern bool iota_gfx_on(void); -extern void iota_gfx_flush(void); -extern void iota_gfx_write_char(uint8_t c); -extern void iota_gfx_write(const char *data); -extern void iota_gfx_write_P(const char *data); -extern void iota_gfx_clear_screen(void); + #include + #include #endif #endif //void promicro_bootloader_jmp(bool program); #ifndef FLIP_HALF -//Standard Keymap +// Standard Keymap +// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) #define KEYMAP( \ - k40, k41, k42, k43, k44, k45, k05, k04, k03, k02, k01, k00, \ - k50, k51, k52, k53, k54, k55, k15, k14, k13, k12, k11, k10, \ - k60, k61, k62, k63, k64, k65, k25, k24, k23, k22, k21, k20, \ - k70, k71, k72, k73, k74, k75, k35, k34, k33, k32, k31, k30 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 }, \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 } \ } - #else -// Keymap with one side flipped +// Keymap with right side flipped +// (TRRS jack on both halves are to the right) #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif - -#endif \ No newline at end of file +#endif diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index ff159e0f06..79860ea35d 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -1,7 +1,7 @@ SRC += matrix.c \ i2c.c \ split_util.c \ - serial.c\ + serial.c \ ssd1306.c # MCU name @@ -74,3 +74,15 @@ USE_I2C ?= yes SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 46586fbc00..39639c3b4b 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -21,7 +21,7 @@ static void setup_handedness(void) { #ifdef EE_HANDS isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); #else - // I2c_MASTER_RIGHT ish deprecate use MASTER_RIGHT instead since this works for both serial and i2c: + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) isLeftHand = !has_usb(); #else diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c index 3c7816bb32..5c6dff27f8 100644 --- a/keyboards/lets_split/ssd1306.c +++ b/keyboards/lets_split/ssd1306.c @@ -1,8 +1,9 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" #include "config.h" #include "i2c.h" -#include #include -#include #include "print.h" #include "lets_split.h" #include "common/glcdfont.c" @@ -466,3 +467,4 @@ void iota_gfx_task(void) { iota_gfx_off(); } } +#endif diff --git a/keyboards/lets_split/ssd1306.h b/keyboards/lets_split/ssd1306.h new file mode 100644 index 0000000000..b0c74f987e --- /dev/null +++ b/keyboards/lets_split/ssd1306.h @@ -0,0 +1,17 @@ +#ifndef SSD1306_H +#define SSD1306_H + +#include +#include + +bool iota_gfx_init(void); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +#endif diff --git a/keyboards/miuni32/Makefile b/keyboards/miuni32/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/miuni32/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h new file mode 100644 index 0000000000..4f9b685518 --- /dev/null +++ b/keyboards/miuni32/config.h @@ -0,0 +1,170 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bigtuna.io +#define PRODUCT Miuni32 +#define DESCRIPTION A custom keyboard for writers + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F4, D7} +#define MATRIX_COL_PINS { C6, C7, F7, F6, F1, E6, B7, B3, B2, B1, B0} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define RGBLIGHT_TIMER +#define RGB_DI_PIN D0 // The pin your RGB strip is wired to +#define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) +#define RGBLED_NUM 7 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/miuni32/keymaps/default/Makefile b/keyboards/miuni32/keymaps/default/Makefile new file mode 100644 index 0000000000..88a3aea741 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/miuni32/keymaps/default/config.h b/keyboards/miuni32/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/miuni32/keymaps/default/keymap.c b/keyboards/miuni32/keymaps/default/keymap.c new file mode 100644 index 0000000000..15e2fa45c0 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +#include "miuni32.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] ={ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT, KC_ENT}, + {KC_Z, KC_X, KC_C, KC_V, KC_V, KC_SPC, KC_B, KC_N, KC_M , MO(1), KC_RCTL} + }, +[1] ={ + {KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL}, + {KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS}, + {RGB_TOG, RGB_HUI, RGB_HUD, RGB_SAI, KC_TRNS, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, RGB_MOD}, + } +}; +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/miuni32/keymaps/default/readme.md b/keyboards/miuni32/keymaps/default/readme.md new file mode 100644 index 0000000000..4cff8ef5a3 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for miuni32 \ No newline at end of file diff --git a/keyboards/miuni32/miuni32.c b/keyboards/miuni32/miuni32.c new file mode 100644 index 0000000000..1c1983a564 --- /dev/null +++ b/keyboards/miuni32/miuni32.c @@ -0,0 +1,28 @@ +#include "miuni32.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/miuni32/miuni32.h b/keyboards/miuni32/miuni32.h new file mode 100644 index 0000000000..eecb17f81f --- /dev/null +++ b/keyboards/miuni32/miuni32.h @@ -0,0 +1,15 @@ +#ifndef MIUNI32_H +#define MIUNI32_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A ) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A } \ +} + +#endif diff --git a/keyboards/miuni32/readme.md b/keyboards/miuni32/readme.md new file mode 100644 index 0000000000..36696ddbcb --- /dev/null +++ b/keyboards/miuni32/readme.md @@ -0,0 +1,28 @@ +miuni32 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/miuni32 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk new file mode 100644 index 0000000000..ef8daf3caa --- /dev/null +++ b/keyboards/miuni32/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/tv44/keymaps/tong92/Makefile b/keyboards/tv44/keymaps/tong92/Makefile new file mode 100644 index 0000000000..e60e3c5c5a --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/tv44/keymaps/tong92/config.h b/keyboards/tv44/keymaps/tong92/config.h new file mode 100644 index 0000000000..be959a823c --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B2 + #define BACKLIGHT_LEVELS 7 +#endif + +#endif diff --git a/keyboards/tv44/keymaps/tong92/keymap.c b/keyboards/tv44/keymaps/tong92/keymap.c new file mode 100644 index 0000000000..4a16b3554f --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/keymap.c @@ -0,0 +1,138 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. +//Author: tong92 + +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define LOWER F(1) +#define RAISE F(2) +#define FTN MO(4) +#define MOUSE M(10) +#define GO_DEFT M(99) +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,--------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter| + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Shift| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt | + * `--------------------------------------------------------------------------' + */ +[0] = { +{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, +{KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT}, +{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT }, +{FTN ,KC_LGUI,KC_LALT,LOWER,XXXXXXX,XXXXXXX,XXXXXXX,RAISE,KC_QUOT,KC_LBRC,KC_RBRC,KC_RALT} +}, +/* LOWER + * ,--------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | | | END | LEFT| Down|RIGHT| + * `--------------------------------------------------------------------------' + */ +[1] = { +{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* RAISE + * ,--------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | | | END | LEFT| Down|RIGHT| + * `--------------------------------------------------------------------------' + */ +[2] ={ +{KC_TILD,KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,_______ }, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS,KC_EQL, KC_LCBR,KC_RCBR,KC_PIPE }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* FTN + * ,--------------------------------------------------------------------------. + * | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED | + * `--------------------------------------------------------------------------' + */ +[4] = { +{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT}, +{_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX}, +{_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,KC_RCTL}, +{_______,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LCTL(LALT(KC_DELT)),XXXXXXX,XXXXXXX,XXXXXXX,LGUI(LCTL(KC_F4)),MOUSE,XXXXXXX,XXXXXXX,M(0)} +}, +/* MOUSE + * ,--------------------------------------------------------------------------. + * | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | | | | | | |M_AC0|M_AC1|M_AC2| | | + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | GO_DEFAULT | GO_DEFAULT | | | | | + * `--------------------------------------------------------------------------' + */ +[10] ={ +{XXXXXXX,XXXXXXX,XXXXXXX,KC_MS_U,XXXXXXX,XXXXXXX,XXXXXXX,KC_WH_L,KC_WH_U,KC_WH_R,XXXXXXX,RESET}, +{XXXXXXX,XXXXXXX,KC_MS_L,KC_MS_D,KC_MS_R,XXXXXXX,XXXXXXX,KC_BTN1,KC_WH_D,KC_BTN2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_ACL0,KC_ACL1,KC_ACL2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_KEY(1, KC_SPC), + [2] = ACTION_LAYER_TAP_KEY(2, KC_SPC) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + break; + case 10: + if (record->event.pressed) { + layer_on(10); + } + break; + case 99: + if (record->event.pressed) { + layer_off(10); + layer_off(4); + } + break; + } + return MACRO_NONE; +}; \ No newline at end of file diff --git a/keyboards/tv44/keymaps/tong92/readme.md b/keyboards/tv44/keymaps/tong92/readme.md new file mode 100644 index 0000000000..8208572568 --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/readme.md @@ -0,0 +1,52 @@ +# The tong92's keymap for tv44 + +- Arrow Layout (45key) +- my keymap for Window User +- Mouse Layer : space -> Default Layer + +## Qwerty + ,--------------------------------------------------------------------------. + | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter| + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | Shift | Z | X | C | V | B | N | M | , | . | / |Shift| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt | + `--------------------------------------------------------------------------' + + +## RAISE + ,--------------------------------------------------------------------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | | | | | END | LEFT| Down|RIGHT| + `--------------------------------------------------------------------------' + + +## FTN + ,--------------------------------------------------------------------------. + | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED | + `--------------------------------------------------------------------------' + + +## MOUSE + ,--------------------------------------------------------------------------. + | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | | | | | | | |M_AC0|M_AC1|M_AC2| | | + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | | | GO_DEFAULT | GO_DEFAULT | | | | | + `--------------------------------------------------------------------------' diff --git a/quantum/quantum.c b/quantum/quantum.c index 62d9ef9232..4f4cee4e9b 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -135,7 +135,7 @@ void reset_keyboard(void) { #endif static bool shift_interrupted[2] = {0, 0}; -static uint16_t scs_timer = 0; +static uint16_t scs_timer[2] = {0, 0}; bool process_record_quantum(keyrecord_t *record) { @@ -395,7 +395,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_LSPO: { if (record->event.pressed) { shift_interrupted[0] = false; - scs_timer = timer_read (); + scs_timer[0] = timer_read (); register_mods(MOD_BIT(KC_LSFT)); } else { @@ -405,7 +405,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[0] && timer_elapsed(scs_timer) < TAPPING_TERM) { + if (!shift_interrupted[0] && timer_elapsed(scs_timer[0]) < TAPPING_TERM) { register_code(LSPO_KEY); unregister_code(LSPO_KEY); } @@ -418,7 +418,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_RSPC: { if (record->event.pressed) { shift_interrupted[1] = false; - scs_timer = timer_read (); + scs_timer[1] = timer_read (); register_mods(MOD_BIT(KC_RSFT)); } else { @@ -428,7 +428,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[1] && timer_elapsed(scs_timer) < TAPPING_TERM) { + if (!shift_interrupted[1] && timer_elapsed(scs_timer[1]) < TAPPING_TERM) { register_code(RSPC_KEY); unregister_code(RSPC_KEY); } diff --git a/readme.md b/readme.md index b2dfc5f759..f7bf14b6ab 100644 --- a/readme.md +++ b/readme.md @@ -32,7 +32,7 @@ The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/j This is not a tiny project. While this is the main readme, there are many other files you might want to consult. Here are some points of interest: * [**The Wiki**](https://github.com/qmk/qmk_firmware/wiki) - the entirety of the readme has been moved here -* The readme for your own keyboard: This is found under `keyboards//`. So for the ErgoDox EZ, it's [here](keyboards/ergodox/ez/); for the Planck, it's [here](keyboards/planck/) and so on. +* The readme for your own keyboard: This is found under `keyboards//`. So for the ErgoDox, it's [here](keyboards/ergodox/); for the Planck, it's [here](keyboards/planck/) and so on. * The list of possible keycodes you can use in your keymap is actually spread out in a few different places: * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes. * [quantum/quantum_keycodes.h](quantum/quantum_keycodes.h) - this is where the QMK-specific aliases are all set up. Things like the Hyper and Meh key, the Leader key, and all of the other QMK innovations. These are also explained and documented below, but `quantum_keycodes.h` is where they're actually defined.