forked from mirrors/qmk_firmware
[Audio] Enable Complementary output for PWM Hardware driver (#22726)
Co-authored-by: Joel Challis <git@zvecr.com>
This commit is contained in:
parent
9069c4540f
commit
29f8fa35cf
2 changed files with 12 additions and 1 deletions
|
@ -199,6 +199,11 @@ with all this information, the configuration would contain these lines:
|
|||
ChibiOS uses GPIOv1 for the F103, which only knows of one alternate function.
|
||||
On 'larger' STM32s, GPIOv2 or GPIOv3 are used; with them it is also necessary to configure `AUDIO_PWM_PAL_MODE` to the correct alternate function for the selected pin, timer and timer-channel.
|
||||
|
||||
You can also use the Complementary output (`TIMx_CHyN`) for PWM on supported controllers. To enable this functionality, you will need to make the following changes:
|
||||
```c
|
||||
// config.h:
|
||||
#define AUDIO_PWM_COMPLEMENTARY_OUTPUT
|
||||
```
|
||||
|
||||
### PWM software :id=pwm-software
|
||||
|
||||
|
|
|
@ -22,6 +22,12 @@
|
|||
# define AUDIO_PWM_COUNTER_FREQUENCY 100000
|
||||
#endif
|
||||
|
||||
#ifndef AUDIO_PWM_COMPLEMENTARY_OUTPUT
|
||||
# define AUDIO_PWM_OUTPUT_MODE PWM_OUTPUT_ACTIVE_HIGH
|
||||
#else
|
||||
# define AUDIO_PWM_OUTPUT_MODE PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH
|
||||
#endif
|
||||
|
||||
extern bool playing_note;
|
||||
extern bool playing_melody;
|
||||
extern uint8_t note_timbre;
|
||||
|
@ -29,7 +35,7 @@ extern uint8_t note_timbre;
|
|||
static PWMConfig pwmCFG = {.frequency = AUDIO_PWM_COUNTER_FREQUENCY, /* PWM clock frequency */
|
||||
.period = 2,
|
||||
.callback = NULL,
|
||||
.channels = {[(AUDIO_PWM_CHANNEL - 1)] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}}};
|
||||
.channels = {[(AUDIO_PWM_CHANNEL - 1)] = {.mode = AUDIO_PWM_OUTPUT_MODE, .callback = NULL}}};
|
||||
|
||||
static float channel_1_frequency = 0.0f;
|
||||
|
||||
|
|
Loading…
Reference in a new issue