forked from mirrors/qmk_firmware
adding traveller keyboard
This commit is contained in:
milestogo
parent
1984861338
commit
24e4e6dd18
7 changed files with 697 additions and 0 deletions
89
keyboards/handwired/traveller/Makefile
Normal file
89
keyboards/handwired/traveller/Makefile
Normal file
|
|
@ -0,0 +1,89 @@
|
|||
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
# for avr upload
|
||||
USB ?= /dev/cu.usbmodem1421
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
ifdef TEENSY2
|
||||
OPT_DEFS += -DATREUS_TEENSY2
|
||||
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||
else
|
||||
OPT_DEFS += -DATREUS_ASTAR
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
endif
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# MCU name
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../Makefile
|
||||
endif
|
||||
|
||||
upload: build
|
||||
$(ATREUS_UPLOAD_COMMAND)
|
||||
|
||||
173
keyboards/handwired/traveller/config.h
Normal file
173
keyboards/handwired/traveller/config.h
Normal file
|
|
@ -0,0 +1,173 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER You
|
||||
#define PRODUCT traveller
|
||||
#define DESCRIPTION A custom keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 13
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D1, D3, D2 }
|
||||
// no I can't say why this order seemed like a good idea
|
||||
#define MATRIX_COL_PINS { B5, D6, B7, B6, F6, B1, B3, F7, B4, E6, D7, C6, D4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
// LED stuff
|
||||
#define RGB_DI_PIN B2
|
||||
//#define RBLIGHT_TIMER
|
||||
#define RGBLED_NUM 1 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
305
keyboards/handwired/traveller/keymaps/default/keymap.c
Normal file
305
keyboards/handwired/traveller/keymaps/default/keymap.c
Normal file
|
|
@ -0,0 +1,305 @@
|
|||
#include "traveller.h"
|
||||
#include "mousekey.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
#define _QW 0
|
||||
#define _LW 1
|
||||
#define _HI 2
|
||||
#define _NAV 4
|
||||
#define _CUR 5
|
||||
#define _FKEYS 6
|
||||
#define _TRNS 8
|
||||
|
||||
// We do the same trick for functions
|
||||
#define RGBLED_TOGGLE 10
|
||||
#define _HIOUT 15
|
||||
#define _LWOUT 16
|
||||
// Macros
|
||||
#define MDL 4
|
||||
#define MDR 5
|
||||
#define MUR 6
|
||||
#define MUL 3
|
||||
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Qwerty
|
||||
* ,-----------------------------------------. .-----------------------------------------.
|
||||
* | NAV | ` ~ | W | E | R | T | | Y | U | I | O | - | = |
|
||||
* |------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
* | Tab | Q | S | D | F | G | | H | J | K | L | P | \ |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------+------|
|
||||
*|ctrl/esc| A | X | C | V | B |Ctrl /| N | M | , | . | ; | ' |
|
||||
* |------+------+------+------+------+------+ // +------+------+------+------+------+------|
|
||||
* | Shift| Z | Del | GUI | Low | Bspc |/Enter| Spc | Hi | GUI | Alt | / |Shift |
|
||||
* `------------------------------------------------------------------------------------------'
|
||||
*
|
||||
*/
|
||||
[_QW] = KEYMAP(
|
||||
F(_NAV), KC_GRV, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_MINS, KC_EQL,
|
||||
KC_TAB, KC_Q, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_P, KC_BSLS,
|
||||
CTL_T(KC_ESC), KC_A, KC_X, KC_C, KC_V, KC_B, KC_RCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SCLN, KC_QUOT,
|
||||
KC_LSFT, KC_Z, KC_DEL, KC_LGUI, MO(_LW), KC_BSPC, KC_ENTER, KC_SPC, MO(_HI), KC_RGUI, KC_RALT, KC_SLSH, KC_RSFT
|
||||
),
|
||||
|
||||
/* LOW - numbers, missing or awkward programming keys
|
||||
Doubled 1 key allows lazy reach with ring finger.
|
||||
* ,-----------------------------------------. .-----------------------------------------.
|
||||
* | FKeys| 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 |Ctrl-alt-del|
|
||||
* |------+------+------+------+------+------| +------+------+------+------+------+------|
|
||||
* | Tab | 1 | ] | ( | ) | | | * | ( | ) | [ | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------+------|
|
||||
* | Caps | [ | | { | } | ` | /| # | { | } | | ] | |
|
||||
* |------+------+------+------+------+------+ // +------+------+------+------+------+------|
|
||||
* | Shift| | | | Low | |/ | | Hi | | | |Shift |
|
||||
* `------------------------------------------------------------------------------------------'
|
||||
*
|
||||
*/
|
||||
|
||||
[_LW] = KEYMAP(
|
||||
F(_FKEYS), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, LCTL(LALT(KC_DEL)) ,
|
||||
KC_TRNS, KC_1, KC_RBRC, KC_LPRN, KC_RPRN, KC_NO, KC_ASTR, KC_LPRN, KC_RPRN, KC_LBRC, KC_NO, KC_NO,
|
||||
KC_CAPS, KC_LBRC, KC_NO, KC_LCBR, KC_RCBR, KC_TILD, KC_TRNS, KC_HASH, KC_LCBR, KC_RCBR, KC_NO, KC_RBRC, KC_NO,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
/* HI - Punctuation, shell and
|
||||
url ://@.com row on bottom, && is opposite || ^$ are in regex order: ^.*$
|
||||
Right hand nav keys work pretty well chorded with the Right hand Hi Key
|
||||
* ,-----------------------------------------. .-----------------------------------------.
|
||||
* |FKEYS | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + |
|
||||
* |------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
* | | ! | & | "|" | $ | % | | Vol+| Mute| | | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------+------|
|
||||
* | CAPS | ^ | : | . | * | - | /| Vol-| Play | PgUp | Home | Up | End |
|
||||
* |------+------+------+------+------+------+ // +------+------+------+------+------+------|
|
||||
* | | / | | | Low | |/ | | Hi | PgDn | Left| Down | Right |
|
||||
* `------------------------------------------------------------------------------------------'
|
||||
*
|
||||
*/
|
||||
|
||||
[_HI] = KEYMAP(
|
||||
F(_FKEYS), KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS,
|
||||
KC_TRNS, KC_EXLM, KC_AMPR, KC_PIPE, KC_DLR, KC_PERC, KC_VOLU, KC_MUTE, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_CAPS, KC_CIRC, KC_COLN, KC_DOT, KC_ASTR, KC_MINS, KC_TRNS, KC_VOLD, KC_PPLS, KC_PGUP, KC_HOME, KC_UP, KC_END,
|
||||
KC_TRNS, KC_SLSH, KC_TRNS, KC_TRNS, F(_LW), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RIGHT
|
||||
),
|
||||
|
||||
/* NAV - mouse & navigation
|
||||
//gui left and right are line home/end, or fore & back in browser
|
||||
// Mouse buttons are reversed for comfort - bigger stretch is to the right button.
|
||||
|
||||
* ,-----------------------------------------. .-----------------------------------------.
|
||||
* | NAV | | | Up | |Gui-> | | MwU | MS_UL| MS_U |MS_UR | |Ms Norm|
|
||||
* |------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||||
* | |Gui<- | Left | Down |Right | C^E | | BTN3 | MS_L |MS Up | MS_R | |Ms Fast |
|
||||
* |------+------+------+------+------+------|------|------+------+------+------+------+--------|
|
||||
* | | C^A | GUI X| GUI C| GUI_V| |Enter/| MWD | M_DL |MS Dwn|MS_DR | Up |Ms Slow |
|
||||
* |------+------+------+------+------+------+ // +------+------+------+------+------+------|
|
||||
* | | GuiZ | | | Low | |/ButnR|ButnL | Hi | | Left | Down | Right |
|
||||
* `------------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_NAV] = KEYMAP(
|
||||
F(_NAV), KC_NO, KC_NO, KC_UP, KC_NO, RGUI(KC_RIGHT), KC_WH_U, M(MUL), KC_MS_U, M(MUR), KC_NO, KC_ACL2,
|
||||
KC_TRNS, RGUI(KC_LEFT), KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_E), KC_BTN3, KC_MS_L, KC_MS_U, KC_MS_R, KC_NO, KC_ACL1,
|
||||
KC_TRNS, LCTL(KC_A), LGUI(KC_X),RGUI(KC_C), RGUI(KC_V),KC_NO, KC_ENTER, KC_WH_D, M(MDL), KC_MS_D, M(MDR), KC_UP, KC_ACL0,
|
||||
KC_TRNS, RGUI(KC_Z), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN2, KC_BTN1, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT
|
||||
),
|
||||
|
||||
/* FKEYS - Funtion keys & mac stuff
|
||||
* ,-----------------------------------------. .-----------------------------------------.
|
||||
* | FKEYS| F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | Ctrl |
|
||||
* |------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
* | | | | | | | | F11 | F12 | F13 | F14 | F15 | Alt |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------+------|
|
||||
* |Qwerty| | | | | | /| | | | | | Del |
|
||||
* |------+------+------+------+------+------+ // +------+------+------+------+------+------|
|
||||
* | . |RGBTog| . | | LO | Bspc |/ | | HI | | | | |
|
||||
* `------------------------------------------------------------------------------------------'
|
||||
*
|
||||
*/
|
||||
|
||||
[_FKEYS] = KEYMAP(
|
||||
F(_FKEYS), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_RCTL,
|
||||
KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_LALT ,
|
||||
F(_QW), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL,
|
||||
KC_TRNS, F(RGBLED_TOGGLE), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
|
||||
/* TRNS - skeleton for laters
|
||||
* ,-----------------------------------------. .-----------------------------------------.
|
||||
* | . | . | . | . | . | . | | ^ | & | * | ( | ) | |
|
||||
* |------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
* | . | . | . | . | . | . | | 6 | 7 | 8 | 9 | 0 | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------+------|
|
||||
* | . | . | . | . | . | . | /| | | | . | ; | " |
|
||||
* |------+------+------+------+------+------+ // +------+------+------+------+------+------|
|
||||
* | . | . | . | GUI | LO | . |/ | Spc | HI | GUI | M0 | / |LSFT |
|
||||
* `------------------------------------------------------------------------------------------'
|
||||
*
|
||||
*/
|
||||
|
||||
[_TRNS] = {
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
|
||||
}
|
||||
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[_QW] = ACTION_LAYER_ON(_QW,ON_RELEASE), // return to QWERTY layer
|
||||
[_LW] = ACTION_LAYER_TAP_TOGGLE(_LW), // Turn on LW when holding, or tap 3 times to switch
|
||||
[_HI] = ACTION_LAYER_TAP_TOGGLE(_HI), // Turn on LW when holding, or tap 3 times to switch
|
||||
[_NAV] = ACTION_LAYER_TOGGLE(_NAV),
|
||||
[_FKEYS] = ACTION_LAYER_TOGGLE(_FKEYS),
|
||||
[_LWOUT] = ACTION_LAYER_OFF(_LW,ON_RELEASE),
|
||||
[_HIOUT] = ACTION_LAYER_OFF(_HI,ON_RELEASE),
|
||||
|
||||
// Functions
|
||||
[RGBLED_TOGGLE] = ACTION_FUNCTION(RGBLED_TOGGLE),
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
backlight_step();
|
||||
#endif
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
|
||||
// from algernon's ErgoDox EZ layout,
|
||||
case MUL:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_UP);
|
||||
mousekey_on(KC_MS_LEFT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_UP);
|
||||
mousekey_off(KC_MS_LEFT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
|
||||
case MUR:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_UP);
|
||||
mousekey_on(KC_MS_RIGHT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_UP);
|
||||
mousekey_off(KC_MS_RIGHT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
|
||||
case MDL:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_DOWN);
|
||||
mousekey_on(KC_MS_LEFT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_DOWN);
|
||||
mousekey_off(KC_MS_LEFT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
|
||||
case MDR:
|
||||
if (record->event.pressed) {
|
||||
mousekey_on(KC_MS_DOWN);
|
||||
mousekey_on(KC_MS_RIGHT);
|
||||
} else {
|
||||
mousekey_off(KC_MS_DOWN);
|
||||
mousekey_off(KC_MS_RIGHT);
|
||||
}
|
||||
mousekey_send();
|
||||
break;
|
||||
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
switch (id) {
|
||||
case RGBLED_TOGGLE:
|
||||
//led operations
|
||||
if (record->event.pressed) {
|
||||
rgblight_toggle();
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
void LayerLEDSet(uint8_t layr) {
|
||||
|
||||
switch (layr) {
|
||||
case _QW:
|
||||
rgblight_setrgb(0,20, 0); // dim green
|
||||
break;
|
||||
case _LW:
|
||||
// deep purple
|
||||
rgblight_setrgb(20,0,35);
|
||||
break;
|
||||
case _HI:
|
||||
// light blue
|
||||
rgblight_setrgb(0,20,20);
|
||||
break;
|
||||
case _NAV:
|
||||
// Yellowy orange
|
||||
rgblight_setrgb(25,20,0); // brighter
|
||||
break;
|
||||
case _FKEYS:
|
||||
// RED
|
||||
rgblight_setrgb(20,0,0); // brighter
|
||||
break;
|
||||
default:
|
||||
rgblight_setrgb(20,2,20);//error
|
||||
break;
|
||||
}
|
||||
|
||||
return;
|
||||
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
// Bleah globals need to be initialized.
|
||||
uint8_t old_layer=_QW;
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
if (old_layer != layer) {
|
||||
LayerLEDSet(layer);
|
||||
old_layer=layer;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
|
||||
|
||||
2
keyboards/handwired/traveller/keymaps/default/readme.md
Normal file
2
keyboards/handwired/traveller/keymaps/default/readme.md
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
# The default keymap for handwired/traveller
|
||||
this is a kitchen sink build
|
||||
35
keyboards/handwired/traveller/readme.md
Normal file
35
keyboards/handwired/traveller/readme.md
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
traveler keyboard firmware
|
||||
======================
|
||||
|
||||
## Traveller Specific Info ##
|
||||
The traveller is a varient on the atreus keyboard.
|
||||
Like the Atreus, it is designed to be a good compromise between size and ergonomics.
|
||||
|
||||
key differences are
|
||||
- an additional column for each pinky
|
||||
- an RGB LED in the center to show the current layer
|
||||
- more finger stagger, splay angle and contoured keycaps (F2 profile for space key).
|
||||
|
||||
You can make your own traveller keyboard by using the openscad tools from the atreus repository, and adding a hole for the LED to shine through.
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboard/traveler folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
To build with the default keymap, simply run `make`.
|
||||
|
||||
### Other Keymaps
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
|
||||
```
|
||||
$ make KEYMAP=[default|jack|<name>]
|
||||
```
|
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
||||
61
keyboards/handwired/traveller/traveller.c
Normal file
61
keyboards/handwired/traveller/traveller.c
Normal file
|
|
@ -0,0 +1,61 @@
|
|||
#include "traveller.h"
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
};
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void process_action_user(keyrecord_t *record) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
rgblight_init();
|
||||
rgblight_mode(1); // solid, no timer
|
||||
rgblight_setrgb(0,20,0);// dim green, happens to be same as _QW
|
||||
#endif
|
||||
|
||||
// Turn status LED on
|
||||
DDRC |= (1<<7);
|
||||
PORTC |= (1<<7);
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
|
||||
32
keyboards/handwired/traveller/traveller.h
Normal file
32
keyboards/handwired/traveller/traveller.h
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
#ifndef TRAVELLER_H
|
||||
#define TRAVELLER_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "led.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#include "rgblight.h"
|
||||
#endif
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#include "backlight.h"
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k07, k08, k09, k0a, k0b, k0c, \
|
||||
k10, k11, k12, k13, k14, k15, k17, k18, k19, k1a, k1b, k1c, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, KC_NO, k07, k08, k09, k0a, k0b, k0c }, \
|
||||
{ k10, k11, k12, k13, k14, k15, KC_NO, k17, k18, k19, k1a, k1b, k1c }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c } \
|
||||
}
|
||||
|
||||
#endif
|
||||
Loading…
Reference in a new issue