diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h
index d28094c492..085e1aebba 100644
--- a/keyboards/massdrop/alt/config.h
+++ b/keyboards/massdrop/alt/config.h
@@ -50,22 +50,18 @@ along with this program. If not, see .
/* This Shift Register expands available hardware output lines to control additional peripherals */
/* It uses four lines from the MCU to provide 16 output lines */
/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
-#define SR_EXP_RCLK_PORT PB
-#define SR_EXP_RCLK_PIN 14
+#define SR_EXP_RCLK_PIN B14
/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
-#define SR_EXP_OE_N_PORT PB
-#define SR_EXP_OE_N_PIN 15
+#define SR_EXP_OE_PIN B15
/* SERCOM port to use for Shift Register SPI */
/* DATAOUT and SCLK must be configured to use hardware pins of this port */
-#define SR_EXP_SERCOM SERCOM2
+#define SPI_SERCOM SERCOM2
/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
-#define SR_EXP_DATAOUT_PORT PA
-#define SR_EXP_DATAOUT_PIN 12
-#define SR_EXP_DATAOUT_MUX 2
+#define SPI_DATAOUT_PIN A12
+#define SPI_DATAOUT_MUX 2
/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
-#define SR_EXP_SCLK_PORT PA
-#define SR_EXP_SCLK_PIN 13
-#define SR_EXP_SCLK_MUX 2
+#define SPI_SCLK_PIN A13
+#define SPI_SCLK_MUX 2
/* Debug LED (Small LED Located near MCU) */
#define DEBUG_LED_ENABLE 1
diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h
index 3dbd9b8877..aefb900448 100644
--- a/keyboards/massdrop/ctrl/config.h
+++ b/keyboards/massdrop/ctrl/config.h
@@ -49,22 +49,18 @@ along with this program. If not, see .
/* This Shift Register expands available hardware output lines to control additional peripherals */
/* It uses four lines from the MCU to provide 16 output lines */
/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
-#define SR_EXP_RCLK_PORT PB
-#define SR_EXP_RCLK_PIN 14
+#define SR_EXP_RCLK_PIN B14
/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
-#define SR_EXP_OE_N_PORT PB
-#define SR_EXP_OE_N_PIN 15
+#define SR_EXP_OE_PIN B15
/* SERCOM port to use for Shift Register SPI */
/* DATAOUT and SCLK must be configured to use hardware pins of this port */
-#define SR_EXP_SERCOM SERCOM2
+#define SPI_SERCOM SERCOM2
/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
-#define SR_EXP_DATAOUT_PORT PA
-#define SR_EXP_DATAOUT_PIN 12
-#define SR_EXP_DATAOUT_MUX 2
+#define SPI_DATAOUT_PIN A12
+#define SPI_DATAOUT_MUX 2
/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
-#define SR_EXP_SCLK_PORT PA
-#define SR_EXP_SCLK_PIN 13
-#define SR_EXP_SCLK_MUX 2
+#define SPI_SCLK_PIN A13
+#define SPI_SCLK_MUX 2
/* Debug LED (Small LED Located near MCU) */
#define DEBUG_LED_ENABLE 1
diff --git a/tmk_core/common/arm_atsam/gpio.h b/tmk_core/common/arm_atsam/gpio.h
index c2d5a30889..915ed0ef4f 100644
--- a/tmk_core/common/arm_atsam/gpio.h
+++ b/tmk_core/common/arm_atsam/gpio.h
@@ -64,7 +64,13 @@ typedef uint8_t pin_t;
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
-#define writePin(pin, level) ((level) ? (writePinHigh(pin)) : (writePinLow(pin)))
+#define writePin(pin, level) \
+ do { \
+ if (level) \
+ PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \
+ else \
+ PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
+ } while (0)
#define readPin(pin) ((PORT->Group[SAMD_PORT(pin)].IN.reg & SAMD_PIN_MASK(pin)) != 0)
diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk
index 5bb45d658e..e3b5505966 100644
--- a/tmk_core/protocol/arm_atsam.mk
+++ b/tmk_core/protocol/arm_atsam.mk
@@ -9,7 +9,8 @@ ifeq ($(RGB_MATRIX_DRIVER),custom)
SRC += $(ARM_ATSAM_DIR)/md_rgb_matrix.c
endif
SRC += $(ARM_ATSAM_DIR)/main_arm_atsam.c
-SRC += $(ARM_ATSAM_DIR)/spi.c
+SRC += $(ARM_ATSAM_DIR)/shift_register.c
+SRC += $(ARM_ATSAM_DIR)/spi_master.c
SRC += $(ARM_ATSAM_DIR)/startup.c
SRC += $(ARM_ATSAM_DIR)/usb/main_usb.c
diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
index d126c66e7d..c3eab39fb1 100644
--- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
+++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
@@ -27,7 +27,7 @@ along with this program. If not, see .
#include "wait.h"
#include "adc.h"
#include "i2c_master.h"
-#include "spi.h"
+#include "shift_register.h"
#include "./usb/usb2422.h"
diff --git a/tmk_core/protocol/arm_atsam/shift_register.c b/tmk_core/protocol/arm_atsam/shift_register.c
new file mode 100644
index 0000000000..8d63af1b59
--- /dev/null
+++ b/tmk_core/protocol/arm_atsam/shift_register.c
@@ -0,0 +1,118 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#include "arm_atsam_protocol.h"
+
+#include "spi_master.h"
+#include "wait.h"
+#include "gpio.h"
+
+// #define SR_USE_BITBANG
+
+// Bodge for when spi_master is not available
+#ifdef SR_USE_BITBANG
+# define CLOCK_DELAY 10
+
+void shift_init_impl(void) {
+ setPinOutput(SR_EXP_RCLK_PIN);
+ setPinOutput(SPI_DATAOUT_PIN);
+ setPinOutput(SPI_SCLK_PIN);
+}
+
+void shift_out_impl(const uint8_t *data, uint16_t length) {
+ writePinLow(SR_EXP_RCLK_PIN);
+ for (uint16_t i = 0; i < length; i++) {
+ uint8_t val = data[i];
+
+ // shift out lsb first
+ for (uint8_t bit = 0; bit < 8; bit++) {
+ writePin(SPI_DATAOUT_PIN, !!(val & (1 << bit)));
+ writePin(SPI_SCLK_PIN, true);
+ wait_us(CLOCK_DELAY);
+
+ writePin(SPI_SCLK_PIN, false);
+ wait_us(CLOCK_DELAY);
+ }
+ }
+ writePinHigh(SR_EXP_RCLK_PIN);
+ return SPI_STATUS_SUCCESS;
+}
+
+#else
+
+void shift_init_impl(void) { spi_init(); }
+
+void shift_out_impl(const uint8_t *data, uint16_t length) {
+ spi_start(SR_EXP_RCLK_PIN, true, 0, 0);
+
+ spi_transmit(data, length);
+
+ spi_stop();
+}
+#endif
+
+// ***************************************************************
+
+void shift_out(const uint8_t *data, uint16_t length) { shift_out_impl(data, length); }
+
+void shift_enable(void) {
+ setPinOutput(SR_EXP_OE_PIN);
+ writePinLow(SR_EXP_OE_PIN);
+}
+
+void shift_disable(void) {
+ setPinOutput(SR_EXP_OE_PIN);
+ writePinHigh(SR_EXP_OE_PIN);
+}
+
+void shift_init(void) {
+ shift_disable();
+ shift_init_impl();
+}
+
+// ***************************************************************
+
+sr_exp_t sr_exp_data;
+
+void SR_EXP_WriteData(void) {
+ uint8_t data[2] = {
+ sr_exp_data.reg & 0xFF, // Shift in bits 7-0
+ (sr_exp_data.reg >> 8) & 0xFF, // Shift in bits 15-8
+ };
+ shift_out(data, 2);
+}
+
+void SR_EXP_Init(void) {
+ shift_init();
+
+ sr_exp_data.reg = 0;
+ sr_exp_data.bit.HUB_CONNECT = 0;
+ sr_exp_data.bit.HUB_RESET_N = 0;
+ sr_exp_data.bit.S_UP = 0;
+ sr_exp_data.bit.E_UP_N = 1;
+ sr_exp_data.bit.S_DN1 = 1;
+ sr_exp_data.bit.E_DN1_N = 1;
+ sr_exp_data.bit.E_VBUS_1 = 0;
+ sr_exp_data.bit.E_VBUS_2 = 0;
+ sr_exp_data.bit.SRC_1 = 1;
+ sr_exp_data.bit.SRC_2 = 1;
+ sr_exp_data.bit.IRST = 1;
+ sr_exp_data.bit.SDB_N = 0;
+ SR_EXP_WriteData();
+
+ shift_enable();
+}
diff --git a/tmk_core/protocol/arm_atsam/spi.h b/tmk_core/protocol/arm_atsam/shift_register.h
similarity index 77%
rename from tmk_core/protocol/arm_atsam/spi.h
rename to tmk_core/protocol/arm_atsam/shift_register.h
index dcd45f31af..56a8c7f717 100644
--- a/tmk_core/protocol/arm_atsam/spi.h
+++ b/tmk_core/protocol/arm_atsam/shift_register.h
@@ -15,28 +15,9 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
-#ifndef _SPI_H_
-#define _SPI_H_
+#pragma once
-/* Macros for Shift Register control */
-#define SR_EXP_RCLK_LO PORT->Group[SR_EXP_RCLK_PORT].OUTCLR.reg = (1 << SR_EXP_RCLK_PIN)
-#define SR_EXP_RCLK_HI PORT->Group[SR_EXP_RCLK_PORT].OUTSET.reg = (1 << SR_EXP_RCLK_PIN)
-#define SR_EXP_OE_N_ENA PORT->Group[SR_EXP_OE_N_PORT].OUTCLR.reg = (1 << SR_EXP_OE_N_PIN)
-#define SR_EXP_OE_N_DIS PORT->Group[SR_EXP_OE_N_PORT].OUTSET.reg = (1 << SR_EXP_OE_N_PIN)
-
-/* Determine bits to set for mux selection */
-#if SR_EXP_DATAOUT_PIN % 2 == 0
-# define SR_EXP_DATAOUT_MUX_SEL PMUXE
-#else
-# define SR_EXP_DATAOUT_MUX_SEL PMUXO
-#endif
-
-/* Determine bits to set for mux selection */
-#if SR_EXP_SCLK_PIN % 2 == 0
-# define SR_EXP_SCLK_MUX_SEL PMUXE
-#else
-# define SR_EXP_SCLK_MUX_SEL PMUXO
-#endif
+#include
/* Data structure to define Shift Register output expander hardware */
/* This structure gets shifted into registers LSB first */
@@ -66,5 +47,3 @@ extern sr_exp_t sr_exp_data;
void SR_EXP_WriteData(void);
void SR_EXP_Init(void);
-
-#endif //_SPI_H_
diff --git a/tmk_core/protocol/arm_atsam/spi.c b/tmk_core/protocol/arm_atsam/spi.c
deleted file mode 100644
index 3b118bc1f1..0000000000
--- a/tmk_core/protocol/arm_atsam/spi.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-Copyright 2018 Massdrop Inc.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#include "arm_atsam_protocol.h"
-
-sr_exp_t sr_exp_data;
-
-void SR_EXP_WriteData(void) {
- SR_EXP_RCLK_LO;
-
- while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.DRE)) {
- DBGC(DC_SPI_WRITE_DRE);
- }
-
- SR_EXP_SERCOM->SPI.DATA.bit.DATA = sr_exp_data.reg & 0xFF; // Shift in bits 7-0
- while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) {
- DBGC(DC_SPI_WRITE_TXC_1);
- }
-
- SR_EXP_SERCOM->SPI.DATA.bit.DATA = (sr_exp_data.reg >> 8) & 0xFF; // Shift in bits 15-8
- while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) {
- DBGC(DC_SPI_WRITE_TXC_2);
- }
-
- SR_EXP_RCLK_HI;
-}
-
-void SR_EXP_Init(void) {
- DBGC(DC_SPI_INIT_BEGIN);
-
- CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT);
-
- // Set up MCU Shift Register pins
- PORT->Group[SR_EXP_RCLK_PORT].DIRSET.reg = (1 << SR_EXP_RCLK_PIN);
- PORT->Group[SR_EXP_OE_N_PORT].DIRSET.reg = (1 << SR_EXP_OE_N_PIN);
-
- // Set up MCU SPI pins
- PORT->Group[SR_EXP_DATAOUT_PORT].PMUX[SR_EXP_DATAOUT_PIN / 2].bit.SR_EXP_DATAOUT_MUX_SEL = SR_EXP_DATAOUT_MUX; // MUX select for sercom
- PORT->Group[SR_EXP_SCLK_PORT].PMUX[SR_EXP_SCLK_PIN / 2].bit.SR_EXP_SCLK_MUX_SEL = SR_EXP_SCLK_MUX; // MUX select for sercom
- PORT->Group[SR_EXP_DATAOUT_PORT].PINCFG[SR_EXP_DATAOUT_PIN].bit.PMUXEN = 1; // MUX Enable
- PORT->Group[SR_EXP_SCLK_PORT].PINCFG[SR_EXP_SCLK_PIN].bit.PMUXEN = 1; // MUX Enable
-
- // Initialize Shift Register
- SR_EXP_OE_N_DIS;
- SR_EXP_RCLK_HI;
-
- SR_EXP_SERCOM->SPI.CTRLA.bit.DORD = 1; // Data Order - LSB is transferred first
- SR_EXP_SERCOM->SPI.CTRLA.bit.CPOL = 1; // Clock Polarity - SCK high when idle. Leading edge of cycle is falling. Trailing rising.
- SR_EXP_SERCOM->SPI.CTRLA.bit.CPHA = 1; // Clock Phase - Leading Edge Falling, change, Trailing Edge - Rising, sample
- SR_EXP_SERCOM->SPI.CTRLA.bit.DIPO = 3; // Data In Pinout - SERCOM PAD[3] is used as data input (Configure away from DOPO. Not using input.)
- SR_EXP_SERCOM->SPI.CTRLA.bit.DOPO = 0; // Data Output PAD[0], Serial Clock PAD[1]
- SR_EXP_SERCOM->SPI.CTRLA.bit.MODE = 3; // Operating Mode - Master operation
-
- SR_EXP_SERCOM->SPI.CTRLA.bit.ENABLE = 1; // Enable - Peripheral is enabled or being enabled
- while (SR_EXP_SERCOM->SPI.SYNCBUSY.bit.ENABLE) {
- DBGC(DC_SPI_SYNC_ENABLING);
- }
-
- sr_exp_data.reg = 0;
- sr_exp_data.bit.HUB_CONNECT = 0;
- sr_exp_data.bit.HUB_RESET_N = 0;
- sr_exp_data.bit.S_UP = 0;
- sr_exp_data.bit.E_UP_N = 1;
- sr_exp_data.bit.S_DN1 = 1;
- sr_exp_data.bit.E_DN1_N = 1;
- sr_exp_data.bit.E_VBUS_1 = 0;
- sr_exp_data.bit.E_VBUS_2 = 0;
- sr_exp_data.bit.SRC_1 = 1;
- sr_exp_data.bit.SRC_2 = 1;
- sr_exp_data.bit.IRST = 1;
- sr_exp_data.bit.SDB_N = 0;
- SR_EXP_WriteData();
-
- // Enable Shift Register output
- SR_EXP_OE_N_ENA;
-
- DBGC(DC_SPI_INIT_COMPLETE);
-}
diff --git a/tmk_core/protocol/arm_atsam/spi_master.c b/tmk_core/protocol/arm_atsam/spi_master.c
new file mode 100644
index 0000000000..9781d45b1e
--- /dev/null
+++ b/tmk_core/protocol/arm_atsam/spi_master.c
@@ -0,0 +1,109 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#include "arm_atsam_protocol.h"
+#include "spi_master.h"
+#include "gpio.h"
+
+/* Determine bits to set for mux selection */
+#if SPI_DATAOUT_PIN % 2 == 0
+# define SPI_DATAOUT_MUX_SEL PMUXE
+#else
+# define SPI_DATAOUT_MUX_SEL PMUXO
+#endif
+
+/* Determine bits to set for mux selection */
+#if SPI_SCLK_PIN % 2 == 0
+# define SPI_SCLK_MUX_SEL PMUXE
+#else
+# define SPI_SCLK_MUX_SEL PMUXO
+#endif
+
+static pin_t currentSelectPin = NO_PIN;
+
+__attribute__((weak)) void spi_init(void) {
+ static bool is_initialised = false;
+ if (!is_initialised) {
+ is_initialised = true;
+
+ DBGC(DC_SPI_INIT_BEGIN);
+
+ CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT);
+
+ // Set up MCU SPI pins
+ PORT->Group[SAMD_PORT(SPI_DATAOUT_PIN)].PMUX[SAMD_PIN(SPI_DATAOUT_PIN) / 2].bit.SPI_DATAOUT_MUX_SEL = SPI_DATAOUT_MUX; // MUX select for sercom
+ PORT->Group[SAMD_PORT(SPI_SCLK_PIN)].PMUX[SAMD_PIN(SPI_SCLK_PIN) / 2].bit.SPI_SCLK_MUX_SEL = SPI_SCLK_MUX; // MUX select for sercom
+ PORT->Group[SAMD_PORT(SPI_DATAOUT_PIN)].PINCFG[SAMD_PIN(SPI_DATAOUT_PIN)].bit.PMUXEN = 1; // MUX Enable
+ PORT->Group[SAMD_PORT(SPI_SCLK_PIN)].PINCFG[SAMD_PIN(SPI_SCLK_PIN)].bit.PMUXEN = 1; // MUX Enable
+
+ DBGC(DC_SPI_INIT_COMPLETE);
+ }
+}
+
+bool spi_start(pin_t csPin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
+ if (currentSelectPin != NO_PIN || csPin == NO_PIN) {
+ return false;
+ }
+
+ currentSelectPin = csPin;
+ setPinOutput(currentSelectPin);
+ writePinLow(currentSelectPin);
+
+ SPI_SERCOM->SPI.CTRLA.bit.DORD = lsbFirst; // Data Order - LSB is transferred first
+ SPI_SERCOM->SPI.CTRLA.bit.CPOL = 1; // Clock Polarity - SCK high when idle. Leading edge of cycle is falling. Trailing rising.
+ SPI_SERCOM->SPI.CTRLA.bit.CPHA = 1; // Clock Phase - Leading Edge Falling, change, Trailing Edge - Rising, sample
+ SPI_SERCOM->SPI.CTRLA.bit.DIPO = 3; // Data In Pinout - SERCOM PAD[3] is used as data input (Configure away from DOPO. Not using input.)
+ SPI_SERCOM->SPI.CTRLA.bit.DOPO = 0; // Data Output PAD[0], Serial Clock PAD[1]
+ SPI_SERCOM->SPI.CTRLA.bit.MODE = 3; // Operating Mode - Master operation
+
+ SPI_SERCOM->SPI.CTRLA.bit.ENABLE = 1; // Enable - Peripheral is enabled or being enabled
+ while (SPI_SERCOM->SPI.SYNCBUSY.bit.ENABLE) {
+ DBGC(DC_SPI_SYNC_ENABLING);
+ }
+ return true;
+}
+
+spi_status_t spi_transmit(const uint8_t *data, uint16_t length) {
+ while (!(SPI_SERCOM->SPI.INTFLAG.bit.DRE)) {
+ DBGC(DC_SPI_WRITE_DRE);
+ }
+
+ for (uint16_t i = 0; i < length; i++) {
+ SPI_SERCOM->SPI.DATA.bit.DATA = data[i];
+ while (!(SPI_SERCOM->SPI.INTFLAG.bit.TXC)) {
+ DBGC(DC_SPI_WRITE_TXC_1);
+ }
+ }
+
+ return SPI_STATUS_SUCCESS;
+}
+
+void spi_stop(void) {
+ if (currentSelectPin != NO_PIN) {
+ setPinOutput(currentSelectPin);
+ writePinHigh(currentSelectPin);
+ currentSelectPin = NO_PIN;
+ }
+}
+
+// Not implemented yet....
+
+spi_status_t spi_write(uint8_t data);
+
+spi_status_t spi_read(void);
+
+spi_status_t spi_receive(uint8_t *data, uint16_t length);
diff --git a/tmk_core/protocol/arm_atsam/spi_master.h b/tmk_core/protocol/arm_atsam/spi_master.h
new file mode 100644
index 0000000000..26c55128be
--- /dev/null
+++ b/tmk_core/protocol/arm_atsam/spi_master.h
@@ -0,0 +1,48 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include
+
+typedef int16_t spi_status_t;
+
+#define SPI_STATUS_SUCCESS (0)
+#define SPI_STATUS_ERROR (-1)
+#define SPI_STATUS_TIMEOUT (-2)
+
+#define SPI_TIMEOUT_IMMEDIATE (0)
+#define SPI_TIMEOUT_INFINITE (0xFFFF)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+void spi_init(void);
+
+bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor);
+
+spi_status_t spi_write(uint8_t data);
+
+spi_status_t spi_read(void);
+
+spi_status_t spi_transmit(const uint8_t *data, uint16_t length);
+
+spi_status_t spi_receive(uint8_t *data, uint16_t length);
+
+void spi_stop(void);
+#ifdef __cplusplus
+}
+#endif